Success of infrazygomatic crest bone screws: patient age, insertion angle, sinus penetration, and terminal insertion torque

An evaluation of bone depth at different three-dimensional paths in infrazygomatic crest region for miniscrew insertion: A cone beam computed tomography study

Objective

To investigate the difference and distribution of bone depth at different three-dimensional simulated paths to help optimize the insertion path for miniscrew placement in the infrazygomatic crest.

Methods

Cone beam computed tomography scans of 80 adults (38 males and 42 females; mean age, 27.0 years) were assessed. For each subject, bone depth of 81 simulated insertion paths at different insertion points and three-dimensional angulations was measured in 160 infrazygomatic crests; the differences were evaluated using the adjusted Friedman test. The bone deficiency ratio for each path was calculated. Distributions of measurements were analyzed and reported as specially designed colormaps.

Results

Bone depth increased, and bone deficiency ratio reduced mesially to distally (P < 0.001), apically to coronally (P < 0.01), and at a greater gingival and distal inclination (P < 0.05). The maximum bone depth (10.72 mm) was observed 13 mm above the maxillary occlusal plane in the mesiobuccal root of the maxillary second molar. The minimum bone depth (3.4 mm) was observed 17 mm above the maxillary occlusal plane in the distobuccal root of the maxillary first molar. No bone deficiency was detected at the paths of 13 mm above the maxillary occlusal plane at a gingival inclination of 70° and distal inclination of 30° in the mesiobuccal root of the maxillary second molar. The highest bone deficiency ratio is present 17 mm above the maxillary occlusal plane at a gingival inclination of 60° and a distal inclination of 0° in the distobuccal root of the maxillary first molar (89/160).

Conclusion

Insertion paths located at 13 mm above the maxillary occlusal plane in the mesiobuccal root of the maxillary second molar were optimal. A gingival inclination of 70° and a distal inclination of 30° could be beneficial. The distobuccal root of the maxillary first molar region or above the 17 mm insertion plane may not be recommended.

Current status of the biomechanics of extra-alveolar miniscrews

Temporary skeletal anchorage devices such as miniscrews are frequently used nowadays. Compared to miniplates, miniscrews are much less expensive and technically easier to place and remove; they are popular and can be easily placed by an orthodontist. Extra-alveolar miniscrews offer benefits compared to inter-radicular miniscrews, such as reduced risk of root damage and the lack of interference with the mesiodistal tooth movement. They are particularly useful for addressing anchorage loss issues and enabling specific tooth movements such as total arch maxillary and mandibular retraction, posterior distalization, molar protraction, molar intrusion, occlusal plane control, and midline correction. The present paper discusses the current biomechanics principles related to the use of extra-alveolar miniscrews placed in the infrazygomatic and mandibular buccal shelf.

Success rate of infrazygomatic crest mini-implants used for en-masse retraction of maxillary anterior teeth in first premolar extraction cases: A three-dimensional comparative prospective clinical trial between adolescents and young adults

BACKGROUND

The purpose of this study was to compare the success rate of infrazygomatic mini-implants between adolescents and young adults.

METHODS

A total of 60 subjects of different age groups ie, (group I [adolescents]: 12-18 years, mean age: 14.9 ± 2.9 years; group II [young adults]: 19-25 years, mean age = 21.9 ± 3.1 years) were assessed in the study. En-masse retraction of maxillary anterior teeth was carried out with extraction of upper first premolars with infrazygomatic crest (IZC) mini-implants as anchorage units. Clinical parameters such as success rate, soft tissue thickness, maximum insertion torque, maximum removal torque, pain response, soft tissue response, and cone-beam computed tomography parameters such as embedded angulation, penetration depth, thickness of bone on buccal and palatal aspect of mini-implant, and peri-implant bone density were evaluated.

RESULTS

The success rate of IZC mini-implants in adolescents was found to be 96.6% and 98.3% in young adults respectively. There was no significant difference in success rate between the two groups. Intergroup comparison showed a significant difference (P < 0.05) in terms of maximum insertion torque, maximum removal torque, soft tissue thickness, cortical bone thickness, and peri-implant bone density values. Comparison between right and left side revealed a significant difference (P < 0.05) with regards to soft tissue response, soft tissue thickness, total bone thickness, cortical bone thickness, and peri-implant bone density.

CONCLUSIONS

There was no significant difference in the success rate of IZC mini-implants between adolescents and young adults. Thus, the use of IZC mini-implants can be recommended in adolescents for successful orthodontic treatment.

Should Cone-Beam Computed Tomography Be Performed Prior to Orthodontic Miniscrew Placement in the Infrazygomatic Crest Area?-A Systematic Review

There is no unequivocal scientific consensus for the temporary anchorage device (TAD) positioning in the infrazygomatic crest area (IZC). The two principal aims of this systematic review were to assess bone availability in the IZC and to establish both the target site and the need for cone-beam computed tomography (CBCT) prior to miniscrew placement. The study was performed following PRISMA guidelines (PROSPERO: CRD42023411650). The inclusion criteria were: at least 10 patients, three-dimensional radiological examination, and IZC assessment for the TAD placement. ROBINS-I tool and Newcastle-Ottawa Scale were used for quality evaluation. No funding was obtained. The study was based on the information coming from: PubMed, Google Scholar, Web of Science Core Collection, MDPI, Wiley, and Cochrane Libraries. The last search was carried out on 1 August 2023. Fourteen studies were identified for analysis. A narrative synthesis was performed to synthesize the findings of the different studies. Unfortunately, it is not possible to establish the generally recommended target site for IZC TAD placement. The reasons for this are the following: heterogeneity of available studies, inconsistent results, and significant risk of bias. The high variability of bone measurements and the lack of reliable predictors of bone availability justify the use of CBCT for TAD trajectory planning. There is a need for more high-quality studies aiming three-dimensional bone analysis of the IZC.

International investigation on temporary anchorage device use: A survey of orthodontists

BACKGROUND

This study investigates characteristics of temporary anchorage devices (TADs) use by surveying a sample of international orthodontists. Furthermore, the survey investigates the stability, insertion technique, and failure rate of TADs and professionals' experience in residency, and it also attempts to establish guidelines for its use in everyday practice.

METHODS

A 19-question survey was sent to orthodontists worldwide asking opinion-based, case-specific, and placement technique questions regarding TADs. Results were collected from 251 survey respondents. The country/regions of practice and length of time practicing orthodontics were the independent variables.

RESULTS

Survey respondents indicated that most orthodontists rarely or sporadically use TADs. Significant differences were also found for TAD utilization purposes, sizes, and placement techniques among different countries/regions and for failure rates (1 or more of the last 6 TADs placed failed-61.6%). A significant difference was found in how many TADs orthodontists placed in residency versus private practice (56% vs. 15%) in relation to how long they have been practicing, but it did not greatly affect the frequency of use, mechanics, or placement technique.

CONCLUSIONS

The frequency of TAD use is similar in many different countries and among different age groups. Although the collected responses suggested significant differences among respondents from different countries, the variability of results for TAD use worldwide prevent the establishment of clear guidelines.

Success rate of infrazygomatic miniscrews considering their design and insertion techniques. A review

Miniscrews offer the possibility of performing dental movements, minimizing unwanted side effects and enhancing effectiveness. Extra-alveolar miniscrews are ideal as they provide excellent primary stability and avoid anatomical structures. However, in some cases the primary stability is lost before achieving the success of the mechanics used and thus, the most likely causes of failure should be determined. The purpose of this review was to analyze the success rate of infrazygomatic miniscrews, considering their design and the insertion techniques used. Data collection of this literature review was carried out by searching PubMed, Wiley, Google Scholar sites, SCIELO, Elsevier and Dialnet for publication made from 2003 to June 2022. The search was carried out on June 10th, 2022 and the following keywords were used; infrazygomatic crest, miniscrews, anchorage and stability. Different topics were analyzed and discussed highlighting their clinical relevance. After analyzing the 798 articles, 566 were excluded. The remaining articles were re-analyzed and 153 articles were excluded for the title or abstract and 33 articles were excluded for the methodology. Finally, 46 items remained. After thoroughly analyzing all the articles included, this study concluded that the alloy of the miniscrew (stainless steel or titanium), perforation of the maxillary sinus and the placement area (adhered mucosa or mobile mucosa) do not influence the survival of the miniscrew. The evidence also indicates that the percentage of failure is lower in infrazygomatic compared to intraradicular miniscrews. Orthodontists can confidently and safely include infrazygomatic miniscrew in different orthodontic procedures.