Effect of different enamel pretreating agents on bonding efficacy and survival rates of orthodontic brackets: In vitro study and split-mouth randomized clinical trial

Metallic vs Ceramic Bracket Failures After 12 Months of Treatment: A Prospective Clinical Trial

INTRODUCTION

Orthodontic treatment with fixed vestibular appliances is still widely used worldwide. When choosing the aesthetic alternative of ceramic brackets, the possibility of failure and cracking of braces should be considered. Therefore, the aim of the present study was to compare the failure rates of ceramic and metal brackets in a 12-month clinical study.

METHODS

Eighty patients undergoing fixed orthodontic treatment with vestibular appliances were enrolled and divided into 2 equal groups: MET for metal brackets and CER for ceramic brackets. After bonding, bracket failures were recorded for 12 months, along with the archwire placed at the time of failure. Angle's dental class, skeletal class, Wits appraisal, Little's irregularity index, overjet, overbite, age, and gender of the patients were recorded from pretreatment cephalometric tracings and study casts. The data were statistically analysed (P < .05).

RESULTS

Significantly higher failure rates were found for ceramic brackets in the overall analysis, in the mandibular arch, and in the posterior region. Regression analysis revealed a significant influence of round nickel-titanium archwires on higher failure rates, whilst a significant influence of rectangular archwires was found on lower failure rates.

CONCLUSIONS

Ceramic brackets showed higher failure rates. Patients should be aware that orthodontic treatment with ceramic brackets may involve delays and inconvenience due to the higher failure rate compared to metal brackets.

Experimental Bracket Design Performance on Bonding and Polymerization of Orthodontic Composite

Objective

To evaluate the enamel bonding ability and orthodontic adhesive resin degree of conversion using the experimental bracket design. Material and Methods. Thirteen bovine teeth were used in the study. The experimental bracket was modified with a translucent region in the center of its body. After enamel etching, Orthocem orthodontic adhesive (FGM, Joinville, Brazil) was applied on the bracket base for bonding. The groups were divided as follows (n = 10 per group): (1) control (CB) with standard brackets and (2) spot bracket (SB) with experimental brackets featuring a 0.8 mm translucent region at the center using carbide bur. Shear bond strength (SBS) was evaluated after 24 hours in a universal testing machine and adhesive remnant index (ARI). The degree of conversion (DC) was analyzed using Raman spectroscopy (n = 3 per group). Data were then analyzed using Student's t-test and Mann-Whitney statistical methods.

Results

The SB group exhibited a higher mean SBS (10.33 MPa) compared to the CB Group (8.77 MPa). However, there was no statistical difference between the groups (p = 0.376). Both SB and CB groups had a mean ARI score of 1. Raman analysis revealed a higher degree of conversion in the SB group (49.3%) compared to the CB group (25.9%).

Conclusions

The experimental support showed a higher degree of adhesive conversion, although there was no significant increase in bond strength.

Three-Dimensional Evaluation of Treatment Effects and Post-Treatment Stability of Maxillary Molar Intrusion Using Temporary Anchorage Devices in Open Bite Malocclusion

Background: We investigated treatment outcomes and post-treatment stability in 10 patients with an anterior open bite and nonsurgical orthodontics. Methods: The patients underwent maxillary molar intrusion using temporary anchorage devices (TADs) to deepen the overbite due to mandibular autorotation. Lateral cephalograms and dental cast models were obtained before treatment (T0), immediately after it (T1), and >1 year after it (T2). Skeletal and dental cephalometric changes and three-dimensional movements of the maxillary dentitions were evaluated. Results: At T0, cephalometric analysis indicated that patients had skeletal class I with tendencies for a class II jaw relationship and a skeletal open bite. During active treatment (T0 to T1), the maxillary first molar intruded by 1.6 mm, the mandibular first molar extruded by 0.3 mm, the Frankfort-mandibular plane angle decreased by 1.1°, and the overbite increased by 4.1 mm. Statistically significant changes were observed in the amount of vertical movement of the maxillary first molar, Frankfort-mandibular plane angle, and overbite. Three-dimensional (3D) dental cast analysis revealed that the maxillary first and second molars intruded, whereas the anterior teeth extruded, with the second premolar as an infection point. In addition, the maxillary molar was tipped distally by 2.9° and rotated distally by 0.91°. Statistically significant changes were observed in the amount of vertical movement of the central incisor, lateral incisor, canine and first molar, and molar angulation. From T1 to T2, no significant changes in cephalometric measurements or the 3D position of the maxillary dentition were observed. The maxillary and mandibular dentitions did not significantly change during post-treatment follow-up. Conclusions: Maxillary molar intrusion using mini-screws is an effective treatment for open bite correction, with the achieved occlusion demonstrating 3D stability at least 1 year after treatment.

Effect of Over-the-counter Whitening Toothpaste and Mouthwash in Orthodontics: A Literature Review

Aim

To summarize and analyze all the available literature on the use of over-the-counter toothpaste and mouthwashes with whitening agents and their possible effects on orthodontic treatment.

Background

Tooth color change frequently occurs during orthodontic treatment and represents a self-perceived need. According to the patient's perspective, there is a preference for the use of toothpaste and mouthwashes with some whitening effect.

Materials and methods

An electronic bibliographic search in English was carried out until June 2022, in PubMed, Scopus, and Web of Science databases. Randomized or nonrandomized clinical trials and experimental laboratory studies were included.

Review results

A total of 57 papers were obtained from an electronic search and 11 studies were included in the review. Outcomes such as strength force elastomeric, color stability, frictional resistance, ion release, shear bond strength (SBS), and adhesive remnant index (ARI) were evaluated.

Conclusion

Toothpaste and mouthwashes with whitening action did not have a favorable effect on most of the outcomes evaluated. In some cases regular toothpaste showed a better effect and in other cases, there were no differences with the control group. Only in the outcome release of ions from wires to whitening effect in teeth with or without attached brackets, they have a better performance.

Clinical significance

Due to the unfavorable effects of over-the-counter whitening toothpaste and mouthwashes on orthodontic materials and appliances, their use should be justified during treatment.

How to cite this article

Chinchay-Ruesta S, Ortiz-Pizarro M, Rodríguez-Díaz DR, et al. Effect of Over-the-counter Whitening Toothpaste and Mouthwash in Orthodontics: A Literature Review. Int J Clin Pediatr Dent 2023;16(S-3):S311-S316.

One-Step Surface-Treatment Reagent (35% 3-O-Ethyl-l-ascorbic Acid Plus 50% Citric Acid Solution) Restores the Shear Bond Strength of Metal Brackets Bonded to Bleached Human Enamel: An In Vitro Study

This study investigates how a new substance, composed of ethyl ascorbic acid and citric acid, affects the shear bond strength (SBS) of metal brackets when bonded to bleached teeth. Forty maxillary premolar teeth were used and randomly placed into four groups (n = 10): the control group did not undergo bleaching; the remaining groups underwent bleached using 35% hydrogen peroxide. In group A, 37% phosphoric acid was applied after bleaching. In group B, 10% sodium ascorbate was used for ten minutes before 37% phosphoric acid. In group C, 35%3-O-ethyl-l-ascorbic acid plus 50% citric acid solution (35EA/50CA) was applied for 5 min. The subgroups were bonded immediately after bleaching. The SBS was determined with a universal testing machine and analyzed using one-way ANOVA and then Tukey's HSD tests. Adhesive remnant index (ARI) scores were determined with a stereomicroscope and analyzed with a chi-squared test. The significance level was 0.05. Group C demonstrated significantly higher SBS values than group A (p < 0.001), but was not significantly different than the control group or group C (p > 0.05). The ARI scores were significantly different among the groups (p < 0.001). In conclusion, enamel surface treatment using 35EA/50CA improved the reduced SBS to an acceptable clinical level and reduced the clinical chair time.

Evaluation of the shear bond strength and adhesive remnant index of color change, fluorescent, and conventional orthodontic adhesives: An in vitro study

AIMS

To investigate the in vitro performance of colour change orthodontic adhesive (CCOA) or fluorescent orthodontic adhesive (FOA), conventional orthodontic adhesives (COA), and the mixed CCOA and FOA utilizing the shear bond strength (SBS) and adhesive remnant index (ARI).

MATERIAL AND METHODS

Ninety extracted first premolars were used in the study. Four manufacturers of orthodontic adhesive were used, including Transbond™ XT (TBXT) and Transbond™ plus (TBP) (3M™ Unitek™, CA, United States), Ormco Enlight™ (OE) and Greengloo™ (GG) (Ormco™, CA, United States), Light Bond Medium™ (LBM), and GoTo™ (GT) (Reliance orthodontic products®, IL, United States), and BracePaste® Adhesive (BPA) and BracePaste® Colour Change (BPCC) (American orthodontics®, WI, United States). The mixed orthodontic adhesive of Transbond™ plus and GoTo™ (TBPGT) was prepared to evaluate the combined effect of colour change and fluorescent orthodontic adhesives. Peak SBS was recorded using a universal testing machine. ARI was measured using a stereomicroscope under 10x magnification. Descriptive statistical analysis and comparative tests were used to evaluate the results.

RESULTS

All CCOA and FOA had higher mean SBS than COA. The highest value of SBS was obtained in BPCC (23.56MPa), and the lowest value in TBPGT (11.41Mpa). One-way ANOVA multiple comparisons and Duncan's multiple range test showed that TBXT and TBPGT significantly differed in SBS with GT, GG, TBP, and BPCC, respectively (P=0.016). Kruskal-Wallis multiple comparisons test showed no significant differences in ARI among the tested adhesives (P=0.089).

CONCLUSIONS

Colour Change Orthodontic Adhesive (CCOA) and Fluorescent Orthodontic Adhesive (FOA) showed a higher SBS than conventional orthodontic adhesives. Greengloo^TM had the lowest ARI among the groups tested. All adhesives tested can be safely used in orthodontic practice, and both CCOA and FOA showed better performance than COA. The Transbond^TM plus and GoTo^TM (TBPGT) mixed adhesives showed the lowest performance in terms of SBS and ARI.

Combined Effects of Different Bracket Bonding Adhesives and Different Resin Removal Methods on Enamel Discoloration: A Preliminary Study

Introduction

This study aimed to investigate the effects of 3 orthodontic bracket adhesives and 3 resin removal methods on enamel discoloration.

Methods

Ninety metal orthodontic brackets were bonded to 90 intact human premolars, using 3 adhesives (total etch composite (Transbond), self-etch composite (OptiBond), and light-curedresin-modified glass ionomer cement (RMGI, Fuji); n = 3 × 30). Each "bracket bonding" group (n = 30) was randomly divided into three subgroups of 10 specimens each, each with a different method of remnant resin removal (using only tungsten carbide burs; using tungsten carbide burs plus Sof-Lex polisher discs; using tungsten carbide burs and Stainbuster burs; n = 3 × 30). After bracket debonding and coffee staining (at 37°C for one week), the color change parameters (Δa, Δb, ΔL, and ΔE) were measured and then analyzed statistically (α = 0.05).

Results

All 9 mean ΔE values were significantly greater than 3.7 and 1.0 (P values ≤0.002, t-test). The effects of composites and resin removal methods on the ΔE parameter (and their interaction) were significant (P values ≤0.008, two-way ANOVA). There were significant pairwise comparisons between total etch (Transbond) and each of the other composites (P values ≤0.008, Tukey). Nonetheless, the difference between self-etch (OptiBond) and RMGI (Fuji) was not significant (P=0.967). There were significant pairwise comparisons between the ΔE parameter of group "Bur + Stainbuster" and ΔE of each of the other methods (both P values ≤0.017).

Conclusions

All 9 pairs of adhesives and resin removal techniques will cause quite visible discolorations. Still, self-etch composites or RMGI might be recommended over total etch composites. Moreover, using Stainbuster burs together with tungsten carbide burs is recommended to reduce discoloration. However, the coloration caused by each composite type can change drastically given the following adhesive removal technique used.

Effect of Remineralizing Agents on Shear Bond Strength of Orthodontic Brackets-In Vitro Study

Orthodontic treatment can be effective only with the proper adhesion strength of the bonded elements on the teeth. The aim of the study was to analyze the influence of different remineralization products on the brackets (Evolve Low Profile Brackets 0.022 Roth prescription (DB Orthodontics Ltd., Silsden, England) shear bond strength (SBS)). In all, 40 teeth were investigated for this study; n = 30 demineralized (immersed in 0.1% citric acid for 30 min, twice a day, for 20 consecutive days) and n = 10 immersed only in artificial saliva. After the demineralization process, remineralization agents were applied to each group (n = 10): Group I: Elmex Sensitive professional^® toothpaste (CP, Gaba GmbH, Witten, Germany) and GC MI Paste Plus^® (GC, Leuven, Belgium), Group II: Elmex Sensitive professional^® toothpaste (CP, Gaba GmbH, Germany) and GC Tooth Mousse^® (Leuven, Belgium), Group III: Elmex Sensitive professional^® toothpaste (CP, Gaba GmbH, Germany). For the teeth in control group C, Elmex Sensitive professional^® toothpaste was used. SBS tests were performed by means of an advanced materials-testing machine that generated maximum load and tensile strength values. The data obtained underwent statistical analysis (ANOVA and Tuckey test) with a statistical threshold of p < 0.05. The SBS values were higher for group II (14.20 MPa) and I (10.36 MPa) and lower for group III (4.25 MPa) and C (4.11 MPa), with statistically significant differences between groups I and II when compared with groups III and C (p < 0.05). In conclusion, GC Tooth Mousse^® and MI-Paste Plus^® have no adverse effect on brackets SBS and are recommended to be used for enamel remineralization during orthodontic treatment.

Application of Silver Nanoparticles to Improve the Antibacterial Activity of Orthodontic Adhesives: An In Vitro Study

There is a significant change in the bacterial plaque populations in the oral cavity during and after orthodontic treatment. Numerous studies have demonstrated that 2−96% of patients could increase the risk of white spot lesions. Streptococcus mutans and Lactobacilli ssp. are responsible for these white spot lesions. In this work, silver nanoparticles (AgNPs) with a diameter of 11 nm and dispersed in water were impregnated onto three different commercial orthodontic adhesives at 535 μg/mL. The shear bond strength (SBS) was assessed on 180 human premolars and metallic brackets. The premolars were divided into six groups (three groups for the commercial adhesives and three groups for the adhesives with AgNPs). All the groups were tested for their bactericidal properties, and their MIC, MBC, and agar template diffusion assays were measured. After adding AgNPs, the SBS was not significantly modified for any adhesive (p > 0.05), and the forces measured during the SBS did not exceed the threshold of 6 to 8 MPa for clinical acceptability in all groups. An increase in the bactericidal properties against both S. mutans and L. acidophilus was measured when the adhesives were supplemented with AgNPs. It was concluded that AgNPs can be supplement commercial orthodontic adhesives without modifying their mechanical properties with improved bactericidal activity.

Exploration and preliminary clinical investigation of an adhesive approach for primary tooth restoration

The current study aims to investigate a suitable adhesive for primary tooth enamel. Shear bond strength (SBS) of primary teeth and the length of resin protrusion were analyzed using one-way ANOVA with Bonferroni multiple comparison tests after etching with 35% H ₃PO ₄. SBS and marginal microleakage tests were conducted with Single Bond Universal (SBU)/Single Bond 2 (SB2) adhesives with or without pre-etching using a nonparametric Kruskal-Wallis test. Clinical investigations were performed to validate the adhesive for primary teeth restoration using Chi-square tests. Results showed that the SBS and length of resin protrusion increased significantly with the etching time. Teeth in the SBU with 35% H ₃PO ₄ pre-etching groups had higher bond strength and lower marginal microleakage than those in the SB2 groups. Mixed fractures were more common in the 35% H ₃PO ₄ etched 30 s + SB2/SBU groups. Clinical investigations showed significant differences between the two groups in cumulative retention rates at the 6-, 12- and 18-month follow-up evaluations, as well as in marginal adaptation, discoloration, and secondary caries at the 12- and 18-month follow-up assessments. Together, pre-etching primary teeth enamel for 30 s before SBU treatment improved clinical composite resin restoration, which can provide a suitable approach for restoration of primary teeth.

Replacement of Congenitally Missing Maxillary Lateral Incisor with Two-Buccal-Retainer Resin-Bonded Fixed Dental Prosthesis Modified by Proximal Boxes

A 21-year-old male patient with congenitally missing maxillary right lateral incisor presented to Fixed Prosthodontics Department at the Faculty of Dentistry, Damascus University (Damascus, Syria). A two-buccal-retainer lithium disilicate glass-ceramic resin-bonded fixed dental prosthesis (RBFDP) was chosen to replace the missing tooth. This clinical report describes a novel preparation design of two-buccal-retainer lithium disilicate glass-ceramic RBFDP modified by proximal boxes. A recall appointment after 3 years showed no fracture, no de-bonding, no secondary caries, and no staining in prosthesis margins. Color matching with natural teeth was excellent, and the patient was satisfied.

Comparative Evaluation of Two Bracket Systems' Bond Strength: Conventional and Self-Ligating

Adhesion remains a key element in dentistry, whether approached in prosthetics, odontology, or orthodontics. It is a continuously researched aspect, as improved materials and adhesive methods keep emerging in the market. No orthodontic treatment can be effective without the proper adhesion strength of the bonded elements on the teeth. The objective of this research, in the broad context of self-ligating versus conventional brackets, was to compare active and passive self-ligating systems with a conventional one by conducting an in vitro study on human-extracted premolars. Shear bond strength tests were executed by means of an advanced materials-testing machine that generated maximum load and tensile strength values. The data obtained underwent statistical analysis with a statistical threshold of p < 0.05. The results regarding the statistical significance were acquired when comparing the passive self-ligating system with the active self-ligating and conventional systems (load-at-maximum-load mean 204.9, SD 91.09, and p < 0.05). In this study, the passive self-ligating bracket system appears to present increased shear bond strength.

Shear Bond Strength and Mode of Failure of Polypropylene Fibers in Orthodontic Flash-Free Adhesive

The purpose of this research is to evaluate the effects of magnetostrictive and piezoelectric scalers on the shear bond strength (SBS), failure mode of the polypropylene fiber adhesive brackets, and the load of both scaler tips. The adhesive precoated (APC) Flash-Free brackets were placed on the buccal surfaces of sixty maxillary first premolars, which were divided into three equal groups of 20 specimens each, following the control group (no scaling), the magnetostrictive group, and the piezoelectric group. All specimens were measured for SBS value by using a universal testing machine at a crosshead speed of 0.75 mm/minute. The mode of failure was examined under a×10 magnification light microscope digital camera and scores for the adhesive remnant index (ARI) were recorded and measured load between the magnetostrictive and piezoelectric groups. For statistical analysis, ANOVA and multiple comparison, as well as unpaired t-test and chi-square tests, at the 0.05 significance level were used. The results showed that the average SBS value of the control group was greater than that of the magnetostrictive group and the piezoelectric group. However, the SBS was not significantly influenced by ultrasonic instruments (p > 0.05). The ARI score and load showed no significant differences among the groups (p > 0.05). In conclusion, the SBS of the APC Flash-Free bracket wasn’t affected by using ultrasonic instrumentation around the base of the bracket.

Efficacy of Bracket Adhesive Remnant Removal by a Fluorescence-Aided Identification Technique with a UV Light Handpiece: In Vitro Study

Objective

This study aims to analyze the fluorescence-aided identification technique efficacy on adhesive remnant removal from the enamel surface after orthodontic bracket debonding.

Materials and Methods

Forty-five extracted human upper central incisors were divided into 3 groups (n = 15) according to the kind of adhesive for bracket bonding and the use or absence of near UV light for remnant removal: BF/UV- fluorescent adhesive/UV light, BF/0-fluorescent adhesive/no UV light, and TB/0-nonfluorescent adhesive/no UV light. For all teeth, 100% of the adhesive used remained on the enamel surface after debonding. Fifteen dentists performed adhesive removal on the enamel surface using a carbide bur. The specimens were analyzed by a stereomicroscope, and the adhesive remnant percentage from each specimen was calculated. The time used by each dentist to perform the removal was recorded. The data were analyzed by one-way ANOVA and Tukey's test.

Results

Significant differences were observed among groups for adhesive remnant (p=0.0008) and for time (p=0.0001). The means of adhesive remnant were BF/UV (5.84), BF/0 (34.37), and TB/0 (37.02). The mean times necessary to remove adhesive were BF/UV (1 min 40 s), BF/0 (3 min 03 s), and TB/0 (2 min 46 s). For the BF/UV group, significantly lower values of adhesive remnants and time for debonding were found (p < 0.05).

Conclusion

The fluorescence-aided identification technique significantly reduced the amount of adhesive remnant, and the time necessary to perform this clinical procedure.

Pit and Fissure Sealant versus Fluoride Varnish for the Prevention of Dental Caries in School Children: A Systematic Review and Meta-Analysis

Children's dental health has become the main concern, due to the increase in caries prevalence amongst children. Pit and fissure sealant (PFS) and fluoride varnish (FV) are effective measures for preventing dental caries. However, the clinical efficacy of these interventions when compared to one another is uncertain. The aim of the present systematic review with meta-analysis was to compare pit and fissure sealants with fluoride varnish for caries prevention of first permanent molars among schoolchildren. This is a meta-Analysis, which involves randomized control trials that compare the effectiveness of PFS with FV within 24 months of follow-up. Five databases were searched from 1990 to 2019 to identify studies published in Arabic or English language. The risk ratio (RR) and 95% confidence intervals (CIs) were calculated using a random-effects model. A total number of 4 studies were included with overall of 1249 children in both groups. Three included trial reported caries increment of first permanent molars (FPM) with 24 months of follow-up, there was no statistical significance (RR: 0.65; 95% CI 0.31 to 1.35; P = 0.26 I2 = 89%). As regards DMFS increment, the analysis showed no statistical differences between FV and PFS in terms of lowering DMFS increment (MD: 0.09; 95% CI: -0.03 to 0.21). Findings of this meta-analysis proved there is no significant difference between PFS and FV in caries prevention efficacy of FPMs at 2 years' follow-up, emphasizing the use of FV since it is more affordable and easier to apply.