Hydroxyapatite and dittmarite precipitation from algae hydrolysate

Preparatiοn οf pοrοus hydrοxyapatite-metakaοlin geοpοlymer granules fοr adsοrptiοn applicatiοns using pοlyethylene glycοl as pοrοgen agent and sοdium dοdecyl sulfate as aniοnic surfactant

This study investigated the elaboration of novel porous absorbent granules by mixing powdered hydroxyapatite, metakaolin, sodium metasilicate, polyethylene glycol, and sodium dodecyl sulfate (SDS), an anionic surfactant. The effect of sodium dodecyl sulfate (SDS) was then studied by introducing it as a powder to the powdered mixture or dissolved into the granulation fluid. Characterization of the granules indicated that the incorporation of SDS dissolved in the granulation fluid into the G-PEG granules improved their specific surface area (97.9 m2/g) and porosity, resulting in a synergistic increase in the adsorption of crystal violet and methylene blue dyes compared to G-PEG granules and hydroxyapatite or metakaolin geopolymer alone. Moreover, the granules exhibited satisfactory compressive strength of 0.81 MPa, making them suitable for large-scale adsorption columns. Finally, the regeneratiοn prοcess οf the granules was modeled and optimized by using surface response methodology based on Box-Behnken design. The granules cοuld be regenerated fοr eight cycles under οptimum cοnditiοns οf acetic acid cοncentratiοn οf 0.72 mοl/L, a temperature οf 323 K, and a cοntact time οf 173.22 min, withοut a significant lοss in the adsοrptiοn capacity οr degradatiοn οf the granules. These results suggest that the pοrοus granules prepared in this study have pοtential tο be used in industrial wastewater treatment.

Biostimulation of green microalgae Chlorella sorokiniana using nanoparticles of MgO, Ca10(PO4)6(OH)2, and ZnO for increasing biodiesel production

Microalgae have the potential to become the primary source of biodiesel, catering to a wide range of essential applications such as transportation. This would allow for a significant reduction in dependence on conventional petroleum diesel. This study investigates the effect of biostimulation techniques utilizing nanoparticles of Magnesium oxide MgO, Calcium hydroxyapatite Ca10(PO4)6(OH)2, and Zinc oxide ZnO to enhance the biodiesel production of Chlorella sorokiniana. By enhancing cell activity, these nanoparticles have demonstrated the ability to improve oil production and subsequently increase biodiesel production. Experimentally, each nanomaterial was introduced at a concentration of 15 mg L-1. The results have shown that MgO nanoparticles yielded the highest biodiesel production, with a recorded yield of 61.5 mg L-1. Hydroxyapatite nanoparticles, on the other hand, facilitated lipid accumulation. ZnO nanoparticles showcased a multifaceted advantage by enhancing both growth and lipid content. Thus, it is suggested that these nanoparticles can be used effectively to increase the lipid content of microalgae. These findings highlight the potential of biostimulation strategies utilizing MgO, hydroxyapatite, and zinc oxide nanoparticles to bolster biodiesel production.

Enhanced Cd(II) biomineralization induced by microalgae after cultivating modification in high-phosphorus culture

In this study, high-phosphorus beared microalgae was prepared by cultivating modification in high-phosphorus culture, and used for the enhanced Cd(II) biomineralization in soil. Batch experiment results showed that Chlorella sorokiniana FK was modified successfully in highly phosphate culture. Both intracellular P (Poly-P, 29.7 mg/kg) and surface P (phosphoryl based functional groups, 3.7 mol/kg) were greatly enhanced, and the Cd(II) removal capacity surged to 45.98 mg/g at equilibrium in the Langmuir simulation. The EXAFS analysis indicated that Cd tended to form a more stable bidentate complex (RPO₄)₂Cd when bounding with phosphate groups on the surface of the high-phosphorus microalgae. Moreover, high-phosphorus beared microalgae not only had higher immobilization amount of Cd(II), but also promoted immobilized Cd from adsorbed state to mineralized state. After high-phosphate cultured, increased density of P-related groups provided more adsorption sites, while the decomposition of intracellular Poly-P released phosphate ions into cell surface microenvironment, which combined and promoted the formation of Cd₃(PO₄)₂/Cd(H₂PO₄)₂ on cell surface. Cd-contaminated soil remediation experiments applying high-surface-phosphate beared microalgae further showed that more Cd stabilized as a residue fraction within 49 days. This study proposes that the high-phosphate culture strategy is a good way to improve the immobilization of heavy metals in soil induced by microorganisms.

Closing the Nutrient Loop-The New Approaches to Recovering Biomass Minerals during the Biorefinery Processes

The recovery of plant mineral nutrients from the bio-based value chains is essential for a sustainable, circular bioeconomy, wherein resources are (re)used sustainably. The widest used approach is to recover plant nutrients on the last stage of biomass utilization processes-e.g., from ash, wastewater, or anaerobic digestate. The best approach is to recover mineral nutrients from the initial stages of biomass biorefinery, especially during biomass pre-treatments. Our paper aims to evaluate the nutrient recovery solutions from a trans-sectorial perspective, including biomass processing and the agricultural use of recovered nutrients. Several solutions integrated with the biomass pre-treatment stage, such as leaching/bioleaching, recovery from pre-treatment neoteric solvents, ionic liquids (ILs), and deep eutectic solvents (DESs) or integrated with hydrothermal treatments are discussed. Reducing mineral contents on silicon, phosphorus, and nitrogen biomass before the core biorefinery processes improves processability and yield and reduces corrosion and fouling effects. The recovered minerals are used as bio-based fertilizers or as silica-based plant biostimulants, with economic and environmental benefits.

Synthesis and Characterization of Calcium Phosphate Materials Derived from Eggshells from Different Poultry with and without the Eggshell Membrane

Calcium phosphate materials such as hydroxyapatite (HA) or tricalcium phosphate (β-TCP) are highly attractive due to their multitude of applications in bone replacement as well as their environmental and ecological credentials. In this research, quail, hen, duck, and pigeon eggshells were used as a calcium source to obtain calcium phosphate materials via the environmentally friendly wet synthesis. Using the eggshells with the organic membrane, the biphasic calcium phosphate materials composed mainly of HA were obtained. The second mineral phase was β-TCP in the case of using quail, hen, and pigeon eggshells and octacalcium phosphate (OCP) in the case of duck eggshells. The HA content in the obtained materials depended on the amount of membrane in the eggshells and decreased in the order of pigeon, duck, hen, and quail eggshells. The eggshell membrane removal from the eggshells caused the reduced content of HA and the presence of the more soluble β-TCP or OCP phase in the obtained materials. The calcium ions release profile in the PBS buffer indicates the potential biomedical application of these materials.

Synthesis and Characterization of Yttrium-Doped Hydroxyapatite Nanoparticles and Their Potential Antimicrobial Activity

This study reports a detailed analysis of the yttrium doping effects into hydroxyapatite (HAp) nano-structures at different amounts (e.g., 0, 1, 2.5, 5, 7.5, 10, and 15%) on the structural, spectroscopic, dielectric, and antimicrobial properties. For this purpose, seven HAp samples having the Y-contents mentioned above were prepared using the microwave-assisted sol-gel precipitation technique. The structure of synthesized samples was fully described via X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transforms infrared (FTIR). Raman spectroscopy and dielectric measurements were used to characterize the spectroscopic properties. Furthermore, the samples’ antimicrobial features have been assisted through the agar disk diffusion technique. This study showed that the crystallinity decreased with the adding of Y-ions inside the HAp matrix. The Y-contents have influenced the crystallite size, lattice parameters, dislocation density, lattice strain, and unit cell volume. The surface morphology is composed of the agglomerated smaller particles. Remarkable changes in the dielectric properties were observed with the adding of Y-ions. The alternating current conductivity obeys the Jonscher’s relation. Y-doped hydroxyapatite nanoparticles have a considerable inhibitory effect against bacteria and fungi (Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, and Candida albicans). The Y-doped hydroxyapatite nanoparticles are a promising material for bone cement engineering with a potential bio-activity

Bioenergy recovery from wastewater produced by hydrothermal processing biomass: Progress, challenges, and opportunities

Hydrothermal carbonization (HTC)/liquefaction (HTL)/gasification (HTG) are promising processes for biofuel production from biomass containing high moisture. However, wastewater, the aqueous phase (AP) byproduct from these hydrothermal processes, is inevitably produced in large amounts. The AP contains >20% of the biomass carbon, and the total organic carbon in AP is as high as 10-20 g/L. The treatment and utilization of AP are becoming a bottleneck for the industrialization of hydrothermal technologies. The major challenges are the presence of various inhibitory substances and the high complexity of AP. Bioenergy recovery from AP has attracted increasing interest. In the present review, the compositions and characteristics of AP are first presented. Then, the progress in recovering bioenergy from AP by recirculation as the reaction solvent, anaerobic digestion (AD), supercritical water gasification (SCWG), microbial fuel cell (MFC), microbial electrolysis cell (MEC), and microalgae cultivation is discussed. Recirculation of AP as reaction solvent is preferable for AP from biomass with relatively low moisture; AD, MFC/MEC, and microalgae cultivation are desirable for the treatment of AP produced from processing biomass with low lignin content at relatively low temperatures; SCWG is widely applicable but is energy-intensive. Finally, challenges and corresponding strategies are proposed to promote the development of AP valorization technologies. Comprehensive analysis of AP compositions, clarification of the mechanisms of valorization processes, valorization process integration detoxification of AP, polycultures and co-processing of AP with other waste, enhancement in pollutant removal, scaling-up performance, and the techno-economic analysis and life-cycle assessment of valorization systems are promising directions in future investigations.

Biomaterial for Bone and Dental Implants: Synthesis of B-Type Carbonated Hydroxyapatite from Biogenic Source

There are several sources from which hydroxyapatite (HAp) can be obtained and may be broadly categorized as synthetic or biogenic. Elevated interest in recent times has pushed for the development of several procedures for extracting HAp from biogenic wastes due to their excellent composition and morphology resemblance to the human calcified tissue (B-type carbonated HAp). Notable biogenic sources reported for HAp extraction span bovine bones, fish scales, corals, eggshells, and snails among other calcium-rich sources. However, most of the synthetic methods are laborious and therefore result in high production costs. In this chapter, we discuss the synthesis of B-type carbonate substituted HAp from an untapped biogenic source, Achatina achatina shells, using a simple precipitation method and a controlled heat-treatment method. This unique treatment method affected the substitution resulting in different crystallographic parameters and revealed a novel material for bone implants and enamel applications.

Syntheses of hydroxyapatite from natural sources

Waste materials from natural sources are important resources for extraction and recovery of valuable compounds. Transformation of these waste materials into valuable materials requires specific techniques and approaches. Hydroxyapatite (HAp) is a biomaterial that can be extracted from natural wastes. HAp has been widely used in biomedical applications owing to its excellent bioactivity, high biocompatibility, and excellent osteoconduction characteristics. Thus, HAp is gaining prominence for applications as orthopaedic implants and dental materials. This review summarizes some of the recent methods for extraction of HAp from natural sources including mammalian, aquatic or marine sources, shell sources, plants and algae, and from mineral sources. The extraction methods used to obtain hydroxyapatite are also described. The effect of extraction process and natural waste source on the critical properties of the HAp such as Ca/P ratio, crystallinity and phase assemblage, particle sizes, and morphology are discussed herein.