Effect of recycling the culture medium on biodiversity and population dynamics of bio-contaminants in Spirulina platensis mass culture systems

Recycling of nutrient medium to improve productivity in large-scale microalgal culture using a hybrid electrochemical water treatment system

Recycling and reusing of nutrient media in microalgal cultivation are important strategies to reduce water consumption and nutrient costs. However, these approaches have limitations, e.g., a decrease in biomass production, (because as reused media can inhibit biomass growth). To address these limitations, we applied a novel membrane filtration‒electrolysis‒ultraviolet hybrid water treatment method capable of laboratory-to-large-scale operation to increase biomass productivity and enable nutrient medium disinfection and recycling. In laboratory-scale experiments, electrolysis effectively remove the biological contaminants from the spent nutrient medium, resulting in a high on-site removal efficiency of dissolved organic carbon (DOC; 80.3 ± 5 %) and disinfection (99.5 ± 0.2 %). Compared to the results for the recycling of nutrient medium without water treatment, electrolysis resulted in a 1.5-fold increase in biomass production, which was attributable to the removal of biological inhibitors from electrochemically produced oxidants (mainly OCl-). In scaled-up applications, the hybrid system improved the quality of the recycled nutrient medium, with 85 ± 2 % turbidity removal, 75 ± 3 % DOC removal, and 99.5 ± 2 % disinfection efficiency, which was beneficial for biomass growth by removing biological inhibitors. After applying the hybrid water treatment method, we achieved a Spirulina biomass production of 0.47 ± 0.03 g L-1, similar to that obtained using a fresh medium (0.53 ± 0.02 g L-1). The on-site disinfection process described herein is practical and offers a cost-saving and environmental friendly alternative for nutrient medium recycling and reusing water in mass and sustainable cultivation of microalgae.

Biotechnologies for bulk production of microalgal biomass: from mass cultivation to dried biomass acquisition

Microalgal biomass represents a sustainable bioresource for various applications, such as food, nutraceuticals, pharmaceuticals, feed, and other bio-based products. For decades, its mass production has attracted widespread attention and interest. The process of microalgal biomass production involves several techniques, mainly cultivation, harvesting, drying, and pollution control. These techniques are often designed and optimized to meet optimal growth conditions for microalgae and to produce high-quality biomass at acceptable cost. Importantly, mass production techniques are important for producing a commercial product in sufficient amounts. However, it should not be overlooked that microalgal biotechnology still faces challenges, in particular the high cost of production, the lack of knowledge about biological contaminants and the challenge of loss of active ingredients during biomass production. These issues involve the research and development of low-cost, standardized, industrial-scale production equipment and the optimization of production processes, as well as the urgent need to increase the research on biological contaminants and microalgal active ingredients. This review systematically examines the global development of microalgal biotechnology for biomass production, with emphasis on the techniques of cultivation, harvesting, drying and control of biological contaminants, and discusses the challenges and strategies to further improve quality and reduce costs. Moreover, the current status of biomass production of some biotechnologically important species has been summarized, and the importance of improving microalgae-related standards for their commercial applications is noted.

Effects of Culture Conditions on the Performance of Arthrospira platensis and Its Production of Exopolysaccharides

Exopolysaccharides (EPS) produced by Arthrospira platensis (A. platensis) has been widely applied in industry and commerce for its various activities but the accumulation of EPS in culture medium may influence the growth of A. platensis reversely. This work aims to explore the impacts of initial pH, nitrogen source and concentration, phosphate concentration and recycle times of the culture medium on the growth of A. platensis and the secretion of its EPS. The results showed that EPS accumulated with the increase in recycle times of culture medium. The optimal initial pH for the growth of A. platensis was 8.50, and high pH of 11.5 inhibited the growth of biomass while resulting in highest EPS content of 92.87 mg/g DW. Excessive and limited nitrogen (NaNO3 of 25.00 g/L and NaNO3 < 2.50 g/L) and phosphate (K2HPO4 of 5.00 g/L and K2HPO4 < 0.50 g/L) inhibited the biomass production of A. platensis by 1.28−30.77% and 14.29−45.05%, respectively. EPS yield of 97.57 mg/g DW and 40.90 mg/g DW were obtained under NaNO3 of 25.00 g/L and K2HPO4 of 5.00 g/L due to salt stress. These findings are beneficial in providing a theoretical basis for high yield EPS from A. platensis without affecting biomass yield.

Cultivation of Arthrospira platensis in Brewery Wastewater

Cultivation of photosynthetic microorganisms in wastewater is a potential cost-effective method of treating wastewater and simultaneously providing the essential nutrients for high-value biomass production. This study investigates the cultivation of the cyanobacterium Arthrospira platensis in non-diluted and non-pretreated brewery wastewater under non-sterile and alkaline growth conditions. The system’s performance in terms of biomass productivity, pollutant consumption, pigment production and biomass composition was evaluated under different media formulations (i.e., addition of sodium chloride and/or bicarbonate) and different irradiation conditions (i.e., continuous illumination and 16:8 light:dark photoperiod). It was observed that the combination of sodium bicarbonate with sodium chloride resulted in maximum pigment production recorded at the end of the experiments, and the use of the photoperiod led to increased pollutant removal (up to 90% of initial concentrations) and biomass concentration (950 mg/L). The composition of the microbial communities established during the experiments was also determined. It was observed that heterotrophic bacteria dominated by the phyla of Pseudomonadota, Bacillota, and Bacteroidota prevailed, while the cyanobacteria population showcased a dynamic behavior throughout the experiments, as it increased towards the end of cultivation (relative abundance of 10% and 30% under continuous illumination and photoperiod application, respectively). Overall, Arthrospira platensis-based cultivation proved to be an effective method of brewery wastewater treatment, although the large numbers of heterotrophic bacteria limit the usage of the produced biomass to applications such as biofuel and biofertilizer production.

Biochemical wastewater from landfill leachate pretreated by microalgae achieving algae's self-reliant cultivation in full wastewater-recycling chain with desirable lipid productivity

Heightened awareness of additional pretreatment for wastewater, has driven studies towards building a full wastewater-recycling chain wherein the wastewater pretreatment is performed by microalgae themselves. We applied biochemical wastewater from landfill leachate with added K₂HPO₄ (BWLL + P) directly to microalgal cultivation. The results showed that the pretreatment provided by the 1st cultivation reduced suspended solids by nearly half, greatly boosting microalgal growth, which thus yielded 1.06 g/L of dry mass and 87.06 mg/L·d of biomass productivity. From the 2nd to the 4th cultivation, lipid accumulation in BWLL + P was 1.12-1.27 times and 1.95-2.36 times higher than in BG11 and BWLL, respectively, mainly attributed to the comfortable environment engendered by the microalgal pretreatment and the organic carbon in the wastewater. Strikingly, the biodiesel production fed with BWLL + P could save 99% of the cost compared with in BG11. In combination, our pioneering full wastewater-recycling chain achieved microalgae's self-reliant cultivation, with wastewater nourishment.

Barriers to microalgal mass cultivation

Economically successful microalgal mass cultivation is dependent on overcoming several barriers that contribute to the cost of production. The severity of these barriers is dependent on the market value of the final product. These barriers prevent the commercially viable production of algal biofuels but are also faced by any producers of any algal product. General barriers include the cost of water and limits on recycling, costs and recycling of nutrients, CO₂ utilization, energy costs associated with harvesting and biomass loss due to biocontamination and pond crashes. In this paper, recent advances in overcoming these barriers are discussed.