Impact of glyphosate herbicide stress on metabolic growth and lipid inducement in Chlorella sorokiniana UUIND6 for biodiesel production

Harnessing the potential of microalgae-based systems for mitigating pesticide pollution and its impact on their metabolism

Due to increased pesticide usage in agriculture, a significant concentration of pesticides is reported in the environment that can directly impact humans, aquatic flora, and fauna. Utilizing microalgae-based systems for pesticide removal is becoming more popular because of their environmentally friendly nature, ability to degrade pesticide molecules into simpler, nontoxic molecules, and cost-effectiveness of the technology. Thus, this review focused on the efficiency, mechanisms, and factors governing pesticide removal using microalgae-based systems and their effect on microalgal metabolism. A wide range of pesticides, like atrazine, cypermethrin, malathion, trichlorfon, thiacloprid, etc., can be effectively removed by different microalgal strains. Some species of Chlorella, Chlamydomonas, Scenedesmus, Nostoc, etc., are documented for >90% removal of different pesticides, mainly through the biodegradation mechanism. The antioxidant enzymes such as ascorbate peroxidase, superoxide dismutase, and catalase, as well as the complex structure of microalgae cell walls, are mainly involved in eliminating pesticides and are also crucial for the defense mechanism of microalgae against reactive oxygen species. However, higher pesticide concentrations may alter the biochemical composition and gene expression associated with microalgal growth and metabolism, which may vary depending on the type of strain, the pesticide type, and the concentration. The final section of this review discussed the challenges and prospects of how microalgae can become a successful tool to remediate pesticides.

Bio-oil and biochar production from Ageratum conyzoides using triple-stage hydrothermal liquefaction and utilization of biochar in removal of multiple heavy metals from water

Production of low-cost biomass and its utilization for producing cost effective and eco-friendly bioenergy as well as for removing heavy metals from water can be explored as an approach to meet the sustainable development goals. In light of the above-mentioned study, hydrothermal liquefaction (HTL) of Billy goat weed (BGW; Ageratum conyzoides) was carried out to produce bio-oil. In addition, the residual biochar from the HTL process was activated to obtain Act-BC and was further modified to produce MnO2-loaded biochar (Act-BC@MnO2-25%). The HTL of BGW was done at three different temperatures, i.e., 250 °C, 350 °C and 450 °C in a high-pressure batch reactor to maximize the bio-oil yield. Also, two different HTL methods i.e., single-stage HTL and triple-stage HTL of BGW were compared and discussed in detail. The bio-oil obtained via the triple-stage HTL was rich in carbon, hydrogen, and nitrogen. It also showed a higher heating value (HHV) and bio-oil yield (46%) than the single-stage. The residual biochar obtained at 450 °C (Act-BC) and MnO2 modified (Act-BC@MnO2-25%) were then tested to adsorb multiple heavy metal (i.e., Pb(II), Cd(II), Cu(II), and Ni(II)) from water. The kinetics data obtained from the adsorption experiment with Act-BC@MnO2-25% were well fitted to PSO kinetics model. The isotherm data were well aligned with the Langmuir model; the adsorption capacity of Act-BC@MnO2-25% was estimated to be 198.70 ± 11.40 mg g-1, 93.70 ± 6.60 mg g-1, 78.90 ± 7.20 mg g-1 and 30.50 ± 2.10 mg g-1 for Pb(II), Cd(II), Cu(II), and Ni(II), respectively. Furthermore, Act-BC@MnO2-25% remained active for metal ions absorption even after six consecutive uses. The result obtained from this study clearly demonstrates that the triple-stage HTL of BGW is a promising technology to achieve both remediation of metal-contaminated water and production of bioenergy.

Evaluation of the mechanisms underlying altered fatty acid biosynthesis in heterotrophic microalgal strain Chlorella sorokiniana during biodegradation of phenol and p-nitrophenol

Phenolic compounds have become a severe environmental concern due to water contamination, affecting the sustainability of the ecosystem. The microalgae enzymes have enticed for the efficient involvement in the biodegradation of phenolics compound in metabolic processes. In this investigation, the oleaginous microalgae Chlorella sorokiniana was cultured heterotrophically under the influence of phenol and p-nitrophenol. The enzymatic assays of algal cell extracts were used to decipher the underlying mechanisms for phenol and p-nitrophenol biodegradation. A reduction of 99.58% and 97.21% in phenol and p-nitrophenol values, respectively, was recorded after the 10th day of microalgae cultivation. Also, the biochemical components in phenol, p-nitrophenol, and control were found to be 39.6 ± 2.3%, 36.7 ± 1.3%, and 30.9 ± 1.8% (total lipids); 27.4 ± 1.4%, 28.3 ± 1.8%, and 19.7 ± 1.5% (total carbohydrates); and 26.7 ± 1.9%, 28.3 ± 1.9%, and 39.9 ± 1.2% (total proteins), respectively. The GC-MS and 1H-NMR spectroscopy attested the incidence of fatty acid methyl esters in the synthesized microalgal biodiesel. The activity of catechol 2,3-dioxygenase and hydroquinone 1,2-dioxygenase in microalgae under heterotrophic conditions has conferred the ortho- and hydroquinone pathways for phenol and p-nitrophenol biodegradation, respectively. Also, the acceleration of fatty acid profiles in microalgae is deliberated under the impact of the phenol and p-nitrophenol biodegradation process. Thus, microalgae enzymes in the metabolic degradation process of phenolic compounds encourage ecosystem sustainability and biodiesel prospects due to the increased lipid profiles of microalgae.

Algal-derived biochar as an efficient adsorbent for removal of Cr (VI) in textile industry wastewater: Non-linear isotherm, kinetics and ANN studies

Textile industries release effluent that contains the vast majority of heavy metals in which Cr (VI) is a toxic carcinogenic element that causes an environmental problem. The aim of the work is to synthesize algae-derived biochar derived from algae using slow pyrolysis at an operating temperature of 500 °C, a heating rate of 10 °C/min and a residence time of 60 min and to use it as an adsorbent to remove Cr (VI). The batch experiment was carried out using different concentrations of Cr (VI) (1, 10, 25, 50, 100, 125, 150 and 200 ppm) at different intervals of time (2.5, 5, 10, 15, 30, 60, 120 and 240 min). The maximum removal percentage of Cr (VI) is 97.88% for the metal concentration of 1 ppm exhibiting non-linear adsorption isotherm (Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin models) and kinetic models (pseudo-first order, pseudo-second order, nth order, and intra-particle diffusion) were analyzed using a solver add-in of Microsoft Excel. According to the results, the Langmuir isotherm model (R² = 0.999) and pseudo-nth order models are suitable to describe monolayer adsorption and the process kinetics, respectively. The maximum adsorption capacity of algal biochar to adsorb is 186.94 mg/g. For the prediction of the optimal removal efficacy, an artificial neural network of the MLP-2-7-1 model was used. The results obtained are useful for future work using algal biochar as an adsorbent of Cr (VI) from textile wastewater to achieve sustainable development goals.

Effects of Piperonyl Butoxide on the Accumulation of Lipid and the Transcript Levels of DtMFPα in Dunaliella tertiolecta

As one of the sources of biodiesel, microalgae are expected to solve petroleum shortage. In this study, different concentrations of piperonyl butoxide were added to the culture medium to investigate their effects on the growth, pigment content, lipid accumulation, and content of carotenoids in Dunaliella tertiolecta. The results showed that piperonyl butoxide addition significantly decreased the biomass, chlorophyll content, and total carotenoid content but hugely increased the lipid accumulation. With the treatment of 150 ppm piperonyl butoxide combined with 8000 Lux light intensity, the final lipid accumulation and single-cell lipid content were further increased by 21.79 and 76.42% compared to those of the control, respectively. The lipid accumulation in D. tertiolecta is probably related to the increased expression of DtMFPα in D. tertiolecta under the action of piperonyl butoxide. The phylogenetic trees of D. tertiolecta and other oil-rich plants were constructed by multiple sequence alignment of DtMFPα, demonstrating their evolutionary relationship, and the tertiary structure of DtMFPα was predicted. In conclusion, piperonyl butoxide has a significant effect on lipid accumulation in D. tertiolecta, which provides valuable insights into chemical inducers to enhance biodiesel production in microalgae to solve the problem of diesel shortage.

Development of microalgae-bacteria symbiosis system for enhanced treatment of biogas slurry

In this study, microalgae-bacteria consortia were developed using bacteria and microalgae isolated from biogas slurry for enhanced nutrients recovery and promoted microalgae growth in wastewater. The enhancement rate was introduced to quantify the interaction between bacteria and microalgae. Co-culture of the indigenous microalgae and bacteria could significantly improve the tolerance of microorganisms to pollutants, increase value-added products' production, promote nutrients removal, and reduce carbon emissions compared to mono-culture. The co-culture of Chlorella sp. GZQ001 and Lysinibacillus sp. SJX05 performed best, with its biomass, lipid, protein and fatty acid methyl ester productivities achieved 113.3, 19.2, 40.9 and 3.7 mg·L^-1·d^-1, respectively. The corresponding nutrients removal efficiencies for ammonia nitrogen, total nitrogen, total organic carbon, and total phosphorus were 83.2%, 82.1%, 34.0% and 76.6%, respectively. These results indicated that co-culture of certain indigenous bacteria and microalgae is beneficial to biogas slurry treatment and microalgae growth.

Impact of pyrene (polycyclic aromatic hydrocarbons) pollutant on metabolites and lipid induction in microalgae Chlorella sorokiniana (UUIND6) to produce renewable biodiesel

Pyrene (polycyclic aromatic hydrocarbon), an anthropogenic organic pollutant prevalent in various ecological units, receives more attention for bioremediation and energy transformation using microalgae. In this study, we have used pyrene pollutant (50-500 ppm) to evaluate the half-maximal inhibitory concentrations (IC₅₀) of Chlorella sorokiniana and the impact on metabolites as well as the induction of lipid biosynthesis to produce renewable biodiesel. Pyrene concentration at 230 ppm (IC₅₀) caused half-maximum inhibition for the 96 h incubation. The harvest in the stationary stage (day 16) for C. sorokiniana revealed a biomass generation of 449 ± 7 mg L^-1 and 444 ± 8 mg L^-1 dcw in the control medium and pyrene IC₅₀ medium, respectively. An insignificant decline in biomass generation (1.2%) was observed due to the stress effect of the pyrene IC₅₀ medium on metabolic biosynthesis. Although contrary to biomass generation, IC₅₀ of pyrene assisted to induce lipid biosynthesis in C. sorokiniana. The improvement in lipid biosynthesis was observed as ~24% higher in pyrene IC₅₀ compared to the control medium. The chemical composition of the microalgae biomass, metabolites, and lipids was examined using FTIR spectra. The extracted lipid was transesterified to produce biodiesel via methanolic-H₂SO₄ catalysis. The renewable biodiesel obtained was evaluated using FTIR and ¹H NMR spectra. The transformation efficiency of the lipid of C. sorokiniana in biodiesel was calculated as ~81%. This research offers the incentive in lipid biosynthesis in microalgae cells using pyrene for the production of renewable and sustainable ecological biofuels along with bioremediation of pyrene.