Enclosed “non-conventional” photobioreactors for microalga production: A review

Carbon capture and utilisation (CCU) solutions: Assessing environmental, economic, and social impacts using a new integrated methodology

Carbon Capture and Utilisation (CCU) technologies play a significant role in climate change mitigation, as these platforms aim to capture and convert CO2 that would be otherwise emitted into the atmosphere. Effective and economically sustainable technologies are crucial to support the transition to renewable and low-carbon energy sources by 2030 and beyond. Currently, studies exploring the financial viability of CCU technologies besides the joint analyses of life-cycle costs and environmental and social impacts are still limited. In this context, the study developed and validated an innovative and integrated methodology, called Life Cycle Cost and Sustainability Assessment (LCC-SA) which allows the joint assessment of (i) project life-cycle costs, (ii) socio-cultural and environmental externalities. This tool was validated with an application to an algal photobioreactors (PBRs) and allowed to assess the economic and environmental sustainability besides identifying the main critical issues to be addressed during the transition from pilot-scale plant to industrial application. The methodology's implementation estimated benefits in two main areas: (i) environmental, including CO2 removal and avoidance through biodiesel production instead of fossil-derived diesel; (ii) socio-cultural, encompassing new patents, knowledge spillovers, human capital formation, and knowledge outputs. The analysis returned as main result that the present value of the social externalities amounts to around EUR 550,000 and the present value of the costs to approximately EUR 60,000. The Economic Net Present Value (ENPV) is EUR 487,394, which shows the significance of the extra-financial effects generated by the research project. At full-scale application, environmental benefits include capturing 187 to 1867 tons of CO2 per year and avoiding 1.7 to 16.7 tons of CO2 annually through biodiesel production instead of fossil-derived diesel.

Preventing biofouling in microalgal photobioreactors

Photobioreactors (PBRs) are used to grow the light-requiring microalgae in diverse commercial processes. Often, they are operated as continuous culture over months period. However, with time, biofouling layer develops on the inner surfaces of their walls. The fouling layer formation deteriorates the PBR performance as foulants reduce light penetration in it. Light is essential for photosynthetic cultures, and a deterioration in lighting adversely impacts algae growth and biomass productivity. Fouling requires a frequent shutdown to clean the PBR and add to the environmental impact of the operation by generating many wastewaters contaminated with the cleaning chemicals. Antibiofouling coatings could be used to modify the surfaces of existing and future PBRs. Therefore, transparent and non-toxic fouling-release coatings, produced using hydrogel technology, could transform the existing PBRs into efficient and enduring microalgae culture systems, requiring only the application of the coating to the inner walls, without additional investments in new PBRs.

Microalgae-mediated bioremediation: current trends and opportunities-a review

Environmental pollution poses a critical global challenge, and traditional wastewater treatment methods often prove inadequate in addressing the complexity and scale of this issue. On the other hand, microalgae exhibit diverse metabolic capabilities that enable them to remediate a wide range of pollutants, including heavy metals, organic contaminants, and excess nutrients. By leveraging the unique metabolic pathways of microalgae, innovative strategies can be developed to effectively remediate polluted environments. Therefore, this review paper highlights the potential of microalgae-mediated bioremediation as a sustainable and cost-effective alternative to conventional methods. It also highlights the advantages of utilizing microalgae and algae-bacteria co-cultures for large-scale bioremediation applications, demonstrating impressive biomass production rates and enhanced pollutant removal efficiency. The promising potential of microalgae-mediated bioremediation is emphasized, presenting a viable and innovative alternative to traditional treatment methods in addressing the global challenge of environmental pollution. This review identifies the opportunities and challenges for microalgae-based technology and proposed suggestions for future studies to tackle challenges. The findings of this review advance our understanding of the potential of microalgae-based technology wastewater treatment.

Enhancing high-density microalgae cultivation via exogenous supplementation of biostimulant derived from onion peel waste for sustainable biodiesel production

Microalgae demonstrate significant potential as a source of liquid-based biofuels. However, increasing biomass productivity in existing cultivation systems is a critical prerequisite for their successful integration into large-scale operations. Thus, the current work aimed to accelerate the growth of C. vulgaris via exogenous supplementation of biostimulant derived from onion peel waste. Under the optimal growth conditions, which entailed a biostimulant dosage of 37.5% v/v, a pH of 3, an air flow rate of 0.4 L/min, and a 2% v/v inoculum harvested during the mid-log phase, yielded a maximum biomass concentration of 1.865 g/L. Under the arbitrarily optimized parameters, a comparable growth pattern was evident in the upscaled cultivation of C. vulgaris, underscoring the potential commercial viability of the biostimulant. The biostimulant, characterized through gas chromatography-mass spectrometry (GC-MS) analysis, revealed a composition rich in polyphenolic and organo-sulphur compounds, notably including allyl trisulfide (28.13%), methyl allyl trisulfide (23.04%), and allyl disulfide (20.78%), showcasing potent antioxidant properties. Additionally, microalgae treated with the biostimulant consistently retained their lipid content at 18.44% without any significant reduction. Furthermore, a significant rise in saturated fatty acid (SFA) content was observed, with C16:0 and C18:1 dominating both bench-scale (44.08% and 14.01%) and upscaled (51.12% and 13.07%) microalgae cultures, in contrast to the control group where C18:2 was prevalent. Consequently, SFA contents reached 54.35% and 65.43% in bench-scale and upscaled samples respectively, compared to 33.73% in the control culture. These compositional characteristics align well with the requirements for producing high-quality crude biodiesel.

Non-destructive monitoring of microalgae biofilms

Biofilm-based cultivation systems are emerging as a promising technology for microalgae production. However, efficient and non-invasive monitoring routines are still lacking. Here, a protocol to monitor microalgae biofilms based on reflectance indices (RIs) is proposed. This framework was developed using a rotating biofilm system for astaxanthin production by cultivating Haematococcus pluvialis on cotton carriers. Biofilm traits such as biomass, astaxanthin, and chlorophyll were characterized under different light and nutrient regimes. Reflectance spectra were collected to identify the spectral bands and the RIs that correlated the most with those biofilm traits. Robust linear models built on more than 170 spectra were selected and validated on an independent dataset. Astaxanthin content could be precisely predicted over a dynamic range from 0 to 4% of dry weight, regardless of the cultivation conditions. This study demonstrates the strength of reflectance spectroscopy as a non-invasive tool to improve the operational efficiency of microalgae biofilm-based technology.

Sustainable hydrogen production via microalgae: Technological advancements, economic indicators, environmental aspects, challenges, and policy implications

Hydrogen has emerged as an alternative energy source to meet the increasing global energy demand, depleting fossil fuels and environmental issues resulting from fossil fuel consumption. Microalgae-based biomass is gaining attention as a potential source of hydrogen production due to its green energy carrier properties, high energy content, and carbon-free combustion. This review examines the hydrogen production process from microalgae, including the microalgae cultivation technological process for biomass production, and the three main routes of biomass-to-hydrogen production: thermochemical conversion, photo biological conversion, and electrochemical conversion. The current progress of technological options in the three main routes is presented, with the various strains of microalgae and operating conditions of the processes. Furthermore, the economic and environmental perspectives of biomass-to-hydrogen from microalgae are evaluated, and critical operational parameters are used to assess the feasibility of scaling up biohydrogen production for commercial industrial-scale applications. The key finding is the thermochemical conversion process is the most feasible process for biohydrogen production, compared to the pyrolysis process. In the photobiological and electrochemical process, pure hydrogen can be achieved, but further process development is required to enhance the production yield. In addition, the high production cost is the main challenge in biohydrogen production. The cost of biohydrogen production for direct bio photolysis it cost around $7.24 kg-1; for indirect bio photolysis it costs around $7.54 kg-1 and for fermentation, it costs around $7.61 kg-1. Therefore, comprehensive studies and efforts are required to make biohydrogen production from microalgae applications more economical in the future.

Emerging revolving algae biofilm system for algal biomass production and nutrient recovery from wastewater

Toward the direction of zero‑carbon emission and green technologies for wastewater treatment, algae-based technologies are considered promising candidates to deal with the current situation of pollution and climate change. Recent developments of algae-based technologies have been introduced in previous studies in which their performances were optimized for wastewater treatment and biomass production. Among these, revolving algae biofilm (RAB) reactors have been proven to have a great potential in high biomass productivity, simple harvesting method, great CO2 transfer rate, high light-use efficiency, heavy metal capture, nutrient removal, and acid mine drainage treatment in previous studies. However, there were few articles detailing RAB performance, which concealed its enormous potential and diminished interest in the model. Hence, this review aims to reveal the major benefit of RAB reactors in simultaneous wastewater treatment and biomass cultivation. However, there is still a lack of research on aspects to upgrade this technology which requires further investigations to improve performance or fulfill the concept of circular economy.

Photobioreactor configurations in cultivating microalgae biomass for biorefinery

Microalgae, highly prized for their protein, lipid, carbohydrate, phycocyanin, and carotenoid-rich biomass, have garnered significant industrial attention in the context of third-generation (3G) biorefineries, seeking sustainable alternatives to non-renewable resources. Two primarily cultivation methods, open ponds and closed photobioreactors systems, have emerged. Open ponds, favored for their cost-effectiveness in large-scale industrial production, although lacking precise environmental control, contrast with closed photobioreactors, offering controlled conditions and enhanced biomass production at the laboratory scale. However, their high operational costs challenge large-scale deployment. This review comprehensively examines the strength, weakness, and typical designs of both outdoor and indoor microalgae cultivation systems, with an emphasis on their application in terms of biorefinery concept. Additionally, it incorporates techno-economic analyses, providing insights into the financial aspects of microalgae biomass production. These multifaceted insights, encompassing both technological and economic dimensions, are important as the global interest in harnessing microalgae's valuable resources continue to grow.

Carbon capture from biomass flue gases for CO2 enrichment in greenhouses

Heating and CO2 enrichment systems can improve yields in intensive greenhouse agriculture Combining both techniques, which are currently applied commercially, can potentially enhance their effect. The CO2 must be separated from the other noxious gases present (such as CO, NOX, and SO2) to avoid them becoming part of the supply. The CO2 is then provided to the greenhouse on demand in the same way as the heating. In this work, we show that an improved food productivity of a pilot-scale greenhouse system combined with CO2 capture by adsorption using activated carbon and heating with alternative fuel. The proposed system's overall performance was evaluated and optimized. The best values were 46.7 g/kg of CO2 storage capacity on the adsorbent bed, 99.99 % removal rate harmful gases from the gas supplied to the greenhouse, CO2 levels of 1851.0 ± 262.8 mg/Nm3 of the CO2 levels in the greenhouse, and an enrichment time of 2.18 ± 0.92 h/day. The system's effective performance over extended periods (November-February) was confirmed and the productivity of a crop species (tomato) was compared to a control, showing an increment of 18 %. The results indicate that this is a valuable option for increasing the crop yield. By integrating this combined system with advanced climate control strategies, it is possible to maximize the CO2 provided per day, leading to higher yields. The system proved to be stable under real pilot-scale conditions over winter periods (four months).

The Role of Light on the Microalgae Biotechnology: Fundamentals, Technological Approaches, and Sustainability Issues

Light energy directly affects microalgae growth and productivity. Microalgae in natural environments receive light through solar fluxes, and their duration and distribution are highly variable over time. Consequently, microalgae must adjust their photosynthetic processes to avoid photo limitation and photoinhibition and maximize yield. Considering these circumstances, adjusting light capture through artificial lighting in the main culture systems benefits microalgae growth and induces the production of commercially important compounds. In this sense, this review provides a comprehensive study of the role of light in microalgae biotechnology. For this, we present the main fundamentals and reactions of metabolism and metabolic alternatives to regulate photosynthetic conversion in microalgae cells. Light conversions based on natural and artificial systems are compared, mainly demonstrating the impact of solar radiation on natural systems and lighting devices, spectral compositions, periodic modulations, and light fluxes when using artificial lighting systems. The most commonly used photobioreactor design and performance are shown herein, in addition to a more detailed discussion of light-dependent approaches in these photobioreactors. In addition, we present the principal advances in photobioreactor projects, focusing on lighting, through a patent-based analysis to map technological trends. Lastly, sustainability and economic issues in commercializing microalgae products were presented.

Solar bioreactors used for the industrial production of microalgae

Microalgae are excellent sources of biomass containing several important compounds for human and animal nutrition-proteins, lipids, polysaccharides, pigments and antioxidants as well as bioactive secondary metabolites. In addition, they have a great biotechnological potential for nutraceuticals, and pharmaceuticals as well as for CO2 sequestration, wastewater treatment, and potentially also biofuel and biopolymer production. In this review, the industrial production of the most frequently used microalgae genera-Arthrospira, Chlorella, Dunaliella, Haematococcus, Nannochloropsis, Phaeodactylum, Porphyridium and several other species is discussed as concerns the applicability of the most widely used large-scale systems, solar bioreactors (SBRs)-open ponds, raceways, cascades, sleeves, columns, flat panels, tubular systems and others. Microalgae culturing is a complex process in which bioreactor operating parameters and physiological variables closely interact. The requirements of the biological system-microalgae culture are crucial to select the suitable type of SBR. When designing a cultivation process, the phototrophic production of microalgae biomass, it is necessary to employ SBRs that are adequately designed, built and operated to satisfy the physiological requirements of the selected microalgae species, considering also local climate. Moreover, scaling up microalgae cultures for commercial production requires qualified staff working out a suitable cultivation regime. KEY POINTS: • Large-scale solar bioreactors designed for microalgae culturing. • Most frequently used microalgae genera for commercial production. • Scale-up requires suitable cultivation conditions and well-elaborated protocols.

Unlocking the potential of microalgae bio-factories for carbon dioxide mitigation: A comprehensive exploration of recent advances, key challenges, and energy-economic insights

Microalgae are promising alternatives to mitigate atmospheric CO₂ owing to their fast growth rates, resilience in the face of adversity and ability to produce a wide range of products, including food, feed supplements, chemicals, and biofuels. However, to fully harness the potential of microalgae-based carbon capture technology, further advancements are required to overcome the associated challenges and limitations, particularly with regards to enhancing CO₂ solubility in the culture medium. This review provides an in-depth analysis of the biological carbon concentrating mechanism and highlights the current approaches, including species selection, optimization of hydrodynamics, and abiotic components, aimed at improving the efficacy of CO₂ solubility and biofixation. Moreover, cutting-edge strategies such as gene mutation, bubble dynamics and nanotechnology are systematically outlined to elevate the CO₂ biofixation capacity of microalgal cells. The review also evaluates the energy and economic feasibility of using microalgae for CO₂ bio-mitigation, including challenges and prospects for future development.

Photobioreactors for utility-scale applications: effect of gas-liquid mass transfer coefficient and other critical parameters

Cultivation of microalgae and controlling its growth and performance in closed photobioreactors (PBRs) are easier than open pond systems for wastewater treatment. The performance of PBRs is influenced by geometry, hydrodynamic behavior, and mass transfer. Horizontal and vertical configurations as common designs of PBR are reviewed based on their features, advantages, and disadvantages. However, vertically operated PBRs like bubble columns are preferably used for utility-scale applications of microalgae-based processes. Moreover, an appropriate reactor design reduces the inhibitory effect of dissolved oxygen concentration produced by microalgae and consequently increases the level of available CO₂ in the medium. Medium properties, superficial gas velocity, gas holdup, bubble sizes, shear stress, mixing time, sparger design, and the ratio of inner diameter to effective height are shown to influence the overall volumetric mass transfer coefficient (K_La) and PBR's performance. The vertical PBRs like bubble columns provide a high mass transfer, a short liquid circulation time, and a long frequency of light/dark cycle for utility application of microalgae. Different flow regimes are obtained in PBRs based on the gas flow rate, inner diameter, and medium properties. Hydraulic retention time as the main operational parameter is determined in a batch mode for continuous wastewater treatment.

Natural Carotenoids: Recent Advances on Separation from Microbial Biomass and Methods of Analysis

Biotechnologically produced carotenoids occupy an important place in the scientific research. Owing to their role as natural pigments and their high antioxidant properties, microbial carotenoids have been proposed as alternatives to their synthetic counterparts. To this end, many studies are focusing on their efficient and sustainable production from renewable substrates. Besides the development of an efficient upstream process, their separation and purification as well as their analysis from the microbial biomass confers another important aspect. Currently, the use of organic solvents constitutes the main extraction process; however, environmental concerns along with potential toxicity towards human health necessitate the employment of "greener" techniques. Hence, many research groups are focusing on applying emerging technologies such as ultrasounds, microwaves, ionic liquids or eutectic solvents for the separation of carotenoids from microbial cells. This review aims to summarize the progress on both the biotechnological production of carotenoids and the methods for their effective extraction. In the framework of circular economy and sustainability, the focus is given on green recovery methods targeting high-value applications such as novel functional foods and pharmaceuticals. Finally, methods for carotenoids identification and quantification are also discussed in order to create a roadmap for successful carotenoids analysis.

Cultivation of Arthrospira platensis and harvesting using edible fungi isolated from mould soybean cake

In this study, the cultivation and harvesting of Arthrospira platensis biomass were proposed via simple, safe, and efficient techniques for direct consumption. Cultivation of microalgae in a covered macrobubble column under outdoor conditions resulted in significant differences (p < 0.05) with a maximum dry cell weight (X_m) of 0.959 ± 0.046 g/L. Notably, outdoor cultures resulted in approximately twofold biomass compared to indoor cultures. This outcome shows that the developed outdoor setup integrated with solar panels while utilising Malaysia's weather and atmospheric air as carbon sources is viable. Meanwhile, for harvesting, the screening showed that the fungus isolated from mould soybean cake (tempeh) starter indicated the highest harvesting efficiency, which was then further identified as Rhizopus microsporus, microscopically and molecularly. Overall, the economical and portable setup of outdoor cultivation coupled with safe harvesting via locally isolated fungus from tempeh as a bioflocculant would provide sustainability to produce A. platensis biomass.

Recent advances in CO2 fixation by microalgae and its potential contribution to carbon neutrality

Many countries and regions have set their schedules to achieve the carbon neutrality between 2030 and 2070. Microalgae are capable of efficiently fixing CO₂ and simultaneously producing biomass for multiple applications, which is considered one of the most promising pathways for carbon capture and utilization. This work reviews the current research on microalgae CO₂ fixation technologies and the challenges faced by the related industries and government agencies. The technoeconomic analysis indicates that cultivation is the major cost factor. Use of waste resources such as wastewater and flue gas can significantly reduce the costs and carbon footprints. The life cycle assessment has identified fossil-based electricity use as the major contributor to the global warming potential of microalgae-based CO₂ fixation approach. Substantial efforts and investments are needed to identify and bridge the gaps among the microalgae strain development, cultivation conditions and systems, and use of renewable resources and energy.

Phycoremediation for carbon neutrality and circular economy: Potential, trends, and challenges

Phycoremediation is gaining attention not only as a pollutant mitigation approach but also as one of the most cost-effective paths to achieve carbon neutrality. When compared to conventional treatment methods, phycoremediation is highly effective in removing noxious substances from wastewater and is inexpensive, eco-friendly, abundantly available, and has many other advantages. The process results in valuable bioproducts and bioenergy sources combined with pollutants capture, sequestration, and utilization. In this review, microalgae-based phycoremediation of various wastewaters for carbon neutrality and circular economy is analyzed scientometrically. Different mechanisms for pollutants removal and resource recovery from wastewaters are explained. Further, critical parameters that influence the engineering design and phycoremediation performance are described. A comprehensive knowledge map highlighting the microalgae potential to treat a variety of industrial effluents is also presented. Finally, challenges and future prospects for industrial implementation of phycoremediation towards carbon neutrality coupled with circular economy are discussed.

Light Modulation for Bioactive Pigment Production in Synechocystis salina

Cyanobacteria are microorganisms that are well-adapted to sudden changes in their environment, namely to light conditions. This has allowed them to develop mechanisms for photoprotection, which encompass alteration in pigment composition. Therefore, light modulation appears to be a suitable strategy to enhance the synthesis of specific pigments (e.g., phycocyanin) with commercial interest, in addition to conveying a more fundamental perspective on the mechanisms of acclimatization of cyanobacterium species. In this study, Synechocystis salina was accordingly cultivated in two light phase stages: (i) white LED, and (ii) shift to distinct light treatments, including white, green, and red LEDs. The type of LED lighting was combined with two intensities (50 and 150 µmol_photons·m⁻²·s⁻¹). The effects on biomass production, photosynthetic efficiency, chlorophyll a (chl a) content, total carotenoids (and profile thereof), and phycobiliproteins (including phycocyanin, allophycocyanin, and phycoerythrin) were assessed. White light (under high intensity) led to higher biomass production, growth, and productivity; this is consistent with higher photosynthetic efficiency. However, chl a underwent a deeper impact under green light (high intensity); total carotenoids were influenced by white light (high intensity); whilst red treatment had a higher effect upon total and individual phycobiliproteins. Enhanced PC productivities were found under modulation with red light (low intensities), and could be achieved 7 days earlier than in white LED (over 22 days); this finding is quite interesting from a sustainability and economic point of view. Light modulation accordingly appears to be a useful tool for supplementary studies pertaining to optimization of pigment production with biotechnological interest.

Microalgae-derived polysaccharides: Potential building blocks for biomedical applications

In recent years, the increasing concern about human health well-being has strongly boosted the search for natural alternatives that can be used in different fields, especially in biomedicine. This has put microalgae-based products in evidence since they contain many bioactive compounds, of which polysaccharides are attractive due to the diverse physicochemical properties and new or improved biological roles they play. Polysaccharides from microalgae, specially exopolysaccharides, are critically important for market purposes because they can be used as anti-inflammatory, immunomodulatory, anti-glycemic, antitumor, antioxidant, anticoagulant, antilipidemic, antiviral, antibacterial, and antifungal agents. Therefore, to obtain higher productivity and competitiveness of these naturally available compounds, the cultivation parameters and the extraction/purification processes must be better optimized in order to bring perspectives for the exploitation of products in commercial and clinical practice. In this sense, the objective of the present review is to elucidate the potential biomedical applications of microalgae-derived polysaccharides. A closer look is taken at the main polysaccharides produced by microalgae, methods of extraction, purification and structural determination, biological activities and their applications, and current status.

Microalgal Biomass as Feedstock for Bacterial Production of PHA: Advances and Future Prospects

The search for biodegradable plastics has become the focus in combating the global plastic pollution crisis. Polyhydroxyalkanoates (PHAs) are renewable substitutes to petroleum-based plastics with the ability to completely mineralize in soil, compost, and marine environments. The preferred choice of PHA synthesis is from bacteria or archaea. However, microbial production of PHAs faces a major drawback due to high production costs attributed to the high price of organic substrates as compared to synthetic plastics. As such, microalgal biomass presents a low-cost solution as feedstock for PHA synthesis. Photoautotrophic microalgae are ubiquitous in our ecosystem and thrive from utilizing easily accessible light, carbon dioxide and inorganic nutrients. Biomass production from microalgae offers advantages that include high yields, effective carbon dioxide capture, efficient treatment of effluents and the usage of infertile land. Nevertheless, the success of large-scale PHA synthesis using microalgal biomass faces constraints that encompass the entire flow of the microalgal biomass production, i.e., from molecular aspects of the microalgae to cultivation conditions to harvesting and drying microalgal biomass along with the conversion of the biomass into PHA. This review discusses approaches such as optimization of growth conditions, improvement of the microalgal biomass manufacturing technologies as well as the genetic engineering of both microalgae and PHA-producing bacteria with the purpose of refining PHA production from microalgal biomass.

Advanced HRT-Controller Aimed at Optimising Nitrogen Recovery by Microalgae: Application in an Outdoor Flat-Panel Membrane Photobioreactor

A fuzzy knowledge-based controller of hydraulic retention time (HRT) was designed and tested in an outdoor membrane photobioreactor (MPBR) to improve nitrogen recovery from a microalgae cultivation system, maintaining the algae as photosynthetically active as possible and limiting their competition with other microorganisms. The hourly flow of the MPBR system was optimised by adjusting the influent flow rate to the outdoor environmental conditions which microalgae were exposed to at any moment and to the nitrogen uptake capacity of the culture. A semi-empirical photosynthetically active radiation (PAR) prediction model was calibrated using total cloud cover (TCC) forecast. Dissolved oxygen, standardised to 25 °C (DO25), was used as an on-line indicator of microalgae photosynthetic activity. Different indexes, based on suspended solids (SS), DO25, and predicted and real PAR, were used as input variables, while the initial HRT of each operating day (HRT0) and the variation of HRT (ΔHRT) served as output variables. The nitrogen recovery efficiency, measured as nitrogen recovery rate (NRR) per nitrogen loading rate (NLR) in pseudo-steady state conditions, was improved by 45% when the HRT-controller was set in comparison to fixed 1.25-d HRT. Consequently, the average effluent total soluble nitrogen (TSN) concentration in the MPBR was reduced by 47%, accomplishing the discharge requirements of the EU Directive 91/271/EEC.

The Effects of Photobioreactor Type on Biomass and Lipid Production of the Green Microalga Monoraphidium pusillum in Laboratory Scale

Mass production of microorganisms, algae among them, for new bioactive compounds and renewable innovative products is a current issue in biotechnology. The greatest challenge of basic research on this topic is to find the best solution for both physiology and scalability. In this study, the main goal was to highlight the contradictions of physiological and technological optimization in the same, relatively small, laboratory scale. The green alga Monoraphidium pusillum (Printz) Komárková-Legnorová was cultured in a conventional Erlenmeyer flask (as air bubbled in a tank-type photobioreactor) and in a hybrid (fermenter type + helical tubular type) photobioreactor of the same volume (2.8 L). Higher cell numbers from 1.7–2.3-fold, 2–2.8-fold higher dry masses, and 1.9–2.6-fold higher total lipid contents (mg·L−1) were measured in the tank reactor than in the hybrid reactor. Cultures in the conventional tank reactor were characterized with better nutrient utilization (42.8–77.7% higher phosphate uptake) and more diverse lipid composition than in the hybrid reactor. The study highlights that well-scalable arrangements and settings could be not optimal (or unsuitable in some cases) from a physiological point of view. The results suggest certain developmental directions for complex, well-scalable devices and highlight the importance of testing the gained physiological optima on these systems.

Bio-membrane integrated systems for nitrogen recovery from wastewater in circular bioeconomy

Wastewater contains a significant amount of recoverable nitrogen. Hence, the recovery of nitrogen from wastewater can provide an option for generating some revenue by applying the captured nitrogen to producing bio-products, in order to minimize dangerous or environmental pollution consequences. The circular bio-economy can achieve greater environmental and economic sustainability through game-changing technological developments that will improve municipal wastewater management, where simultaneous nitrogen and energy recovery are required. Over the last decade, substantial efforts were undertaken concerning the recovery of nitrogen from wastewater. For example, bio-membrane integrated system (BMIS) which integrates biological process and membrane technology, has attracted considerable attention for recovering nitrogen from wastewater. In this review, current research on nitrogen recovery using the BMIS are compiled whilst the technologies are compared regarding their energy requirement, efficiencies, advantages and disadvantages. Moreover, the bio-products achieved in the nitrogen recovery system processes are summarized in this paper, and the directions for future research are suggested. Future research should consider the quality of recovered nitrogenous products, long-term performance of BMIS and economic feasibility of large-scale reactors. Nitrogen recovery should be addressed under the framework of a circular bio-economy.

Productivity analysis in tubular photobioreactors using a dynamic photosynthesis model coupled to computational fluid dynamics particle tracking

Tubular photobioreactors (TPBRs) are closed devices used for the mass culture of microalgae. TPBRs are supposed to be well-mixed, but the influence of their specific fluid dynamics in photosynthesis efficiency has never been studied in detail. Here, we use Computational Fluid Dynamics (CFD) coupled to a dynamic photosynthesis model to analyze the efficiency of the photosynthetic response in the loop of TPBRs of different sizes (14, 24, 44, 64, and 84 mm) and circulation velocities (0.4 to 1 m s^-1). The results show that only the smallest diameters cause enough radial mixing for a photosynthesis-enhancing light regime (integration factor Γ = 0.199 for D = 14 mm and v = 1 m s^-1) while high circulation velocities in larger diameters (up to 1 m s^-1) increase operating costs but do not enhance photosynthetic productivity. It is also shown the relevance of the characteristic frequency of the strain (β), which is crucial for high productivity.

Advancement of green technologies: A comprehensive review on the potential application of microalgae biomass

Microalgae have drawn significant interest worldwide, owing to their enormous application potential in the green energy, biopharmaceutical, and nutraceutical industries. Many studies have proved and stated the potential of microalgae in the area of biofuel which is economically effective and environmentally friendly. Besides the commercial value, the potential of microalgae in environmental protection has also been investigated. Microalgae-based process is one of the most effective way to treat heavy metal pollution, compared to conventional methods, it does not release any toxic waste or harmful gases, and the aquatic organism will not receive any harmful effects. The potential dual role of microalge in phytoremedation and energy production has made it widely explored for its capability. The interest of microalgae in various application has motivated a new focus in green technologies. Considering the rapid population growth with the continuous increase on the global demand and the application of biomass in diverse field, significant upgrades have been performed to accommodate green technological advancement. In the past decade, noteworthy advancement has been made on the technology involving the diverse application of microalgae biomass. This review aims to explore on the application of microalgae and the development of green technology in various application for microalgae biomass. There is great prospects for researchers in this field to delve into other potential utilization of microalgae biomass not only for bioremediation process but also to generate revenues from microalgae by incorporating clean and green technology for long-term sustainability and environmental benefits.

Variables Governing Photosynthesis and Growth in Microalgae Mass Cultures

Since the 1950s, microalgae have been grown commercially in man-made cultivation units and used for biomass production as a source of food and feed supplements, pharmaceuticals, cosmetics and lately biofuels, as well as a means for wastewater treatment and mitigation of atmospheric CO2 build-up. In this work, photosynthesis and growth affecting variables—light intensity, pH, CO2/O2 exchange, nutrient supply, culture turbulence, light/dark cell cycling, biomass density and culture depth (light path)—are reviewed as concerns in microalgae mass cultures. Various photosynthesis monitoring techniques were employed to study photosynthetic performance to optimize the growth of microalgae strains in outdoor cultivation units. The most operative and reliable techniques appeared to be fast-response ones based on chlorophyll fluorescence and oxygen production monitoring, which provide analogous results.