Phytohormone production and morphology of Spirulina platensis grown in dairy wastewaters

Growth and productivity of Haematococcus pluvialis and Coelastrella saipanensis by photosystem modulation for understanding the heterotrophic nutritional strategy for bioremediation application

In this study, Haematococcus pluvialis and Coelastrella saipanensis were evaluated for heterotrophic nutrition potential in dairy waste medium by blocking the PSII using DCMU. The study was done by four sets of experiments. In the first set, in the different concentrations DCMU-treatments, 20μL showed pronounced effect in H. pluvialis and C. saipanensis as 89 % and 83% decrease in cells (>30 and > 250 cells/mL) compared to control (536 ± 12.35 × 104 and 1167 ± 15.35 × 104 cells/mL, respectively). Damage to the PS II by DCMU interrupted the growth, which in turn produced a significant drop in the number of cells. In the second round of experiment, growth of algae in various dairy waste concentrations suggest that dairy wastewater (DWW) provides enough nutrients to produce 35.71 % and 64.74 % more cells in H. pluvialis and C. saipanensis, respectively compared to the control. In the third set, high DCMU concentration was added to microalgae cultures in DWW to assess the heterotrophic nutrition potential. Growth in cell number 34.4 ± 19 and 617.46 ± 60.44 cells/mL was recorded in H. pluvialis and C. saipanensis when grown control medium whereas addition of DCMU reduced the cell number to 1.53 ± 0.75 and 55.13 ± 0.75 cells/mL on 15th day, respectively. This shows cells in cultures treated with DCMU reveal that algae can sustain their metabolic activity by utilizing the nutrients of dairy waste inhibiting photosystem. Fourth round of experiments found that microalgae could resume their growth and productivity by adapting to heterotrophic nutritional behaviour when DCMU given in mild dose at different time interval. This study conclude as C. saipanensis grows more readily by absorbing dairy waste nutrients than H. pluvialis. Therefore, C. saipanensis is an excellent choice for wastewater treatment through sustainable environmentally benign process after scale-up investigation. These results provide useful information to advance to molecular study for measuring microalgae's capability for bioremediation application.

Coupling dairy wastewaters for nutritional balancing and water recycling: sustainable heterologous 2-phenylethanol production by engineered cyanobacteria

Microalgae biotechnology is hampered by the high production costs and the massive usage of water during large-volume cultivations. These drawbacks can be softened by the production of high-value compounds and by adopting metabolic engineering strategies to improve their performances and productivity. Today, the most sustainable approach is the exploitation of industrial wastewaters for microalgae cultivation, which couples valuable biomass production with water resource recovery. Among the food processing sectors, the dairy industry generates the largest volume of wastewaters through the manufacturing process. These effluents are typically rich in dissolved organic matter and nutrients, which make it a challenging and expensive waste stream for companies to manage. Nevertheless, these rich wastewaters represent an appealing resource for microalgal biotechnology. In this study, we propose a sustainable approach for high-value compound production from dairy wastewaters through cyanobacteria. This strategy is based on a metabolically engineered strain of the model cyanobacterium Synechococcus elongatus PCC 7942 (already published elsewhere) for 2-phenylethanol (2-PE). 2-PE is a high-value aromatic compound that is widely employed as a fragrance in the food and cosmetics industry thanks to its pleasant floral scent. First, we qualitatively assessed the impact of four dairy effluents on cyanobacterial growth to identify the most promising substrates. Both tank-washing water and the liquid effluent of exhausted sludge resulted as suitable nutrient sources. Thus, we created an ideal buffer system by combining the two wastewaters while simultaneously providing balanced nutrition and completely avoiding the need for fresh water. The combination of 75% liquid effluent of exhausted sludge and 25% tank-washing water with a fine-tuning ammonium supplementation yielded 180 mg L-1 of 2-PE and a biomass concentration of 0.6 gDW L-1 within 10 days. The mixture of 90% exhausted sludge and 10% washing water produced the highest yield of 2-PE (205 mg L-1) and biomass accumulation (0.7 gDW L-1), although in 16 days. Through these treatments, the phosphates were completely consumed, and nitrogen was removed in a range of 74%-77%. Overall, our approach significantly valorized water recycling and the exploitation of valuable wastewaters to circularly produce marketable compounds via microalgae biotechnology, laying a promising groundwork for subsequent implementation and scale-up.

Enhancing sustainability through microalgae cultivation in urban wastewater for biostimulant production and nutrient recovery

Microalgae can produce biostimulants in form of phytohormones, which are compounds that, even if applied in low concentrations, can have stimulant effects on plants growth and can enhance their quality and their resistance to stress. Considering that microalgal biomass can grow recovering nutrients from wastewater, this circular approach allows to use residues for the production of high added value compounds (such as phytohormones) at low cost. The interest on biostimulants production from microalgae have recently raised. Scientists are focused on the direct application of these cellular extracts on plants, while the number of studies on the identification of bioactive molecules, such as phytohormones, is very scarce. Two cyanobacteria strains (Synechocystis sp. (SY) and Phormidium sp. (PH)) and a chlorophyte (Scenedesmus sp. (SC)) were cultured in laboratory-scale PBRs with a working volume of 2.5 L in secondary urban wastewater varying N:P ratio in the cultures to obtain the highest productivity. The variation of N:P ratio affects microalgae growth, and SY and PH presented higher productivities (73 and 48 mg L-1 d, respectively) under higher N:P ratio (> 22:1). Microalgal biomass was freeze-dried and phytohormones content was measured with ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The three microalgae showed similar phytohormones profiles, being the auxin (indole-3-acetic acid, IAA) the most abundant (72 ng g-1DW in SY). Proteins were major macronutrient for all strains, reaching 48 %DW in PH culture. To optimize the biostimulants production, a balance between the production of such compounds, biomass productivity and nutrients removal should be taken into consideration. In this sense, SC was the most promising strain, showing the highest N and P removal rates (73 % and 59 %, respectively) while producing phytohormones.

Overview of microalgae and cyanobacteria-based biostimulants produced from wastewater and CO2 streams towards sustainable agriculture: A review

For a long time, marine macroalgae (seaweeds) have been used to produce commercial biostimulants in order to ensure both productivity and quality of agricultural crops under abiotic stress. With similar biological properties, microalgae have slowly attracted the scientific community and the biostimulant industry, in particular because of their ability to be cultivated on non-arable lands with high biomass productivity all year long. Moreover, the recent strategies of culturing these photosynthetic microorganisms using wastewater and CO2 opens the possibility to produce large quantity of biomass at moderate costs while integrating local and circular economy approaches. This paper aims to provide a state of the art review on the development of microalgae and cyanobacteria based biostimulants, focusing on the different cultivation, extraction and application techniques available in the literature. Emphasis will be placed on microalgae and cyanobacteria cultivation using liquid and gaseous effluents as well as emerging green-extraction approaches, taking in consideration the actual European regulatory framework.

Agro-Industrial Wastewaters for Algal Biomass Production, Bio-Based Products, and Biofuels in a Circular Bioeconomy

Recycling bioresources is the only way to sustainably meet a growing world population’s food and energy needs. One of the ways to do so is by using agro-industry wastewater to cultivate microalgae. While the industrial production of microalgae requires large volumes of water, existing agro-industry processes generate large volumes of wastewater with eutrophicating nutrients and organic carbon that must be removed before recycling the water back into the environment. Coupling these two processes can benefit the flourishing microalgal industry, which requires water, and the agro-industry, which could gain extra revenue by converting a waste stream into a bioproduct. Microalgal biomass can be used to produce energy, nutritional biomass, and specialty products. However, there are challenges to establishing stable and circular processes, from microalgae selection and adaptation to pretreating and reclaiming energy from residues. This review discusses the potential of agro-industry residues for microalgal production, with a particular interest in the composition and the use of important primary (raw) and secondary (digestate) effluents generated in large volumes: sugarcane vinasse, palm oil mill effluent, cassava processing waster, abattoir wastewater, dairy processing wastewater, and aquaculture wastewater. It also overviews recent examples of microalgae production in residues and aspects of process integration and possible products, avoiding xenobiotics and heavy metal recycling. As virtually all agro-industries have boilers emitting CO2 that microalgae can use, and many industries could benefit from anaerobic digestion to reclaim energy from the effluents before microalgal cultivation, the use of gaseous effluents is also discussed in the text.

Microalgae cultivation in wastewater from agricultural industries to benefit next generation of bioremediation: a bibliometric analysis

The aim of this study was to provide a bibliometric analysis and mapping of existing scientific papers, focusing on microalgae cultivation coupled with biomass production and bioremediation of wastewater from agricultural industries, including cassava, dairy, and coffee. Using the Web of Science (WoS) database for the period 1996-2021, a search was performed using a keyword strategy, aiming at segregating the papers in groups. For the first search step, the keywords "wastewater treatment", AND "microalgae", AND "cassava" OR "dairy" OR "coffee" were used, resulting in 59 papers. For the second step, the keywords "wastewater treatment" AND "biomass productivity" AND "microalgae" AND "economic viability" OR "environmental impacts" were used, which resulted in 34 articles. In these papers, keywords such as "carbon dioxide biofixation" and "removal of nutrients by the production of biomass by microalgae" followed by "environmental and economic impacts" were highlighted. Some of these papers presented an analysis of the economic feasibility of the process, which reveal the state-of-the-art setup required to make the cultivation of microalgae economically viable. Researches focusing on the efficiency of microalgae biomass harvesting are needed to improve the integration of microalgae production in industrial eco-parks using wastewater to achieve the global goal of bioremediation and clean alternatives for renewable energy generation.