Chlorella vulgaris and Arthrospira platensis growth in a continuous membrane photobioreactor using industrial winery wastewater

Winery wastewater treatment by microalgae Chlorella sorokiniana and characterization of the produced biomass for value-added products

The microalgae Chlorella sorokiniana was used for the treatment of winery wastewater (WWW). Batch experiments were initially conducted to investigate how biomass acclimatization in different media, dilution of wastewater, and addition of ammonium nitrogen (NH4-N) affect the growth of microalgae and the removal of major pollutants. Afterwards, two sequencing batch reactor (SBR) systems were tested applying different configurations and hydraulic retention times. The biomass collected at the end of the experiments was characterized for proteins, lipids, carbohydrates, amino acid profile, and the existence of lutein, β-carotene, chlorophyll a, and tocopherols. Batch experiments showed that Chlorella sorokiniana acclimatization to urban wastewater enhanced the removal of NH4-N and total phosphorus (TP). The operation of a two-stage SBR system achieved COD and NH4-N removal equal to 85 ± 9% and 91 ± 20%, respectively, while the use of a single-stage system feeding with anaerobically pretreated WWW resulted to COD and NH4-N removal of 78 ± 9% and 95 ± 9%, respectively. Analyses of biomass showed higher protein content (up to 58.8%) in batch experiments with NH4-N addition as well as in SBR experiments. The cultivation of microalgae under SBR conditions enhanced the production of pigments and tocopherols. The maximum concentrations of 1075 mg kg-1, 45.5 mg kg-1, and 131.2 mg kg-1 were achieved for lutein, β-carotene, and tocopherols, respectively, in the one-stage system. Our findings suggested that Chlorella sorokiniana cultivation in WWW not only removed nutrients from WWW but also could potentially serve for the production of value-added ingredients used in food industry, cosmetics, and animal feedstock.

A bibliometric analysis of published literature on membrane photobioreactors for wastewater treatment from 2000 to 2022

With the focus on limiting greenhouse gas emissions, microalgae-based technology is a promising approach for wastewater treatment, combining cost-effective operation, nutrient recovery, and assimilation of CO2. In addition, membrane technology supports process intensification and wastewater reclamation. Based on a bibliometric analysis, this paper evaluated the literature on membrane photobioreactors to highlight promising areas for future research. Specifically, efforts should be made on advancing knowledge of interactions between algae and bacteria, analysing different strategies for membrane fouling control and determining the conditions for the most cost-effective operation. The Scopus® database was used to select documents from 2000 to 2022. A set of 126 documents were found. China is the country with the highest number of publications, whereas the most productive researchers belong to the Universitat Politècnica de València (Spain). The analysis of 50 selected articles provides a summary of the main parameters investigated, that focus in increasing the biomass productivity and nutrient removal. In addition, microalgal-bacterial membrane photobioreactor seems to have the greatest commercialisation potential. S-curve fitting confirms that this technology is still in its growth stage.

Microalgal bioremediation of brackish aquaculture wastewater

Rapid aquaculture industry development contributed to a major increase in aquaculture wastewater generation. In the context of a circular economy, aquaculture wastewater treatment should simultaneously recover nutrients from the wastewater. Among many treatment methods, bioremediation using microalgae could be a cost-effective and environmentally friendly system that can be applied to treat aquaculture wastewater and simultaneously produce high-value microalgal biomass. This study explored the feasibility of treating brackish wastewater (0.8 % NaCl) generated from a Qatari commercial tilapia farm by microalgae. At first, 10 strains were grown using wastewater from the local farm in an indoor experiment. Based on nitrogen assimilation, biomass yield, biomass quality, and ease of harvesting, 4 candidate strains (Haematococcus sp., Neochloris sp., Monoraphidium sp., and Nostoc sp.) were shortlisted for outdoor growth experiments. Although Nostoc sp. could not grow outdoor in the wastewater, the other three strains were able to assimilate at least 70.5 % of the total nitrogen in the wastewater. Haematococcus sp. and Neochloris sp. could be harvested using self-settling, whereas Monoraphidium required an energy-intensive tangential flow filtration membrane process. Hence, the overall energy requirement for bioremediation, including biomass dewatering, for Haematococcus sp., Neochloris sp., and Monoraphidium sp. were determined as 0.64, 0.78, and 5.68 MJ/m³, respectively. Neochloris sp. had almost twice the biomass yield compared to Haematococcus sp. - suggesting that Neochloris sp. could be a potential candidate for aquaculture wastewater treatment.

Continuous Cultivation of Microalgae in Cattle Slaughterhouse Wastewater Treated with Hydrodynamic Cavitation

Cattle slaughtering produce large amounts of wastewater containing high concentrations of organic matter and nutrients and requires significant treatment before disposal or reutilization. However, the nutrients contained can be valued as a medium for microalgal biomass generation. In this work, hydrodynamic cavitation (HC) followed by membrane filtration or biological (microalgae cultivation) treatment in continuous mode were performed. From cattle slaughterhouse wastewater (CSW), by the effect of HC treatment with air injection in batch mode, more than 20% of the chemical oxygen demand (COD) was removed. In a continuous HC process, the COD content in output was 324 mg O2/L, which is 68% lower than the supplied CSW. After that, 76% of residual COD was removed by filtration through a tubular alumina membrane (600 nm). Finally, 85% of residual COD after HC treatment in 24 h in a batch mode was removed by microalgae. On the other hand, the COD concentration in the output was around 59 mg O2/L in continuous mode, which represents 85–93% COD removal. The process involving HC and microalgae growing looks promising since in addition to water treatment, the microalgae produced could be valued in a biorefinery concept.

High-Pressure Technologies for the Recovery of Bioactive Molecules from Agro-Industrial Waste

Large amounts of food waste are produced each year. These residues require appropriate management to reduce their environmental impact and, at the same time, economic loss. However, this waste is still rich in compounds (e.g., colorants, antioxidants, polyphenols, fatty acids, vitamins, and proteins) that can find potential applications in food, pharmaceutical, and cosmetic industries. Conventional extraction techniques suffer some drawbacks when applied to the exploitation of food residues, including large amounts of polluting solvents, increased time of extraction, possible degradation of the active molecules during extraction, low yields, and reduced extraction selectivity. For these reasons, advanced extraction techniques have emerged in order to obtain efficient residue exploitation using more sustainable processes. In particular, performing extraction under high-pressure conditions, such as supercritical fluids and pressurized liquid extraction, offers several advantages for the extraction of bioactive molecules. These include the reduced use of toxic solvents, reduced extraction time, high selectivity, and the possibility of being applied in combination in a cascade of progressive extractions. In this review, an overview of high-pressure extraction techniques related to the recovery of high added value compounds from waste generated in food industries is presented and a critical discussion of the advantages and disadvantages of each process is reported. Furthermore, the possibility of combined multi-stage extractions, as well as economic and environmental aspects, are discussed in order to provide a complete overview of the topic.