Effect of chamber characteristics, loading and analysis time on motility and kinetic variables analysed with the CASA-mot system in goat sperm

Are There Differences between Methods Used for the Objective Estimation of Boar Sperm Concentration and Motility?

Artificial insemination in the swine industry, as in other species, demands adequate semen handling and accurate evaluation for the preparation of seminal doses. Sperm concentration and motility estimates are part of the semen evaluation process and are considered important for maximizing the yield of doses for insemination. In this study, methods were examined for their accuracy in the estimation of boar sperm concentration and motility. Assessments of sperm concentration were carried out using iSperm^®, ISAS^® v1, Open CASA v2, and the Accuread^® photometer. Analyses of sperm motility were performed with iSperm^®, ISAS^® v1, and Open CASA v2 systems. In this study, boar semen samples were collected from 10 healthy males from two genetic lines. There were no relevant differences between sire lines when sperm concentration was assessed. A Bayesian analysis was applied to the four methods used to assess sperm concentration to examine whether there are relevant differences between them. Results suggested differences in the four methods, with a probability of relevance (PR) of 0.86-1.00. The iSperm^® method revealed higher concentration values within the highest posterior density region at 95% confidence interval (HPD_95%) = 167.0, 224.2 M/mL, whereas Open CASA v2 showed the lowest values, with HPD_95% = 99.3, 155.9 M/mL. The iSperm^® demonstrated higher reliability in measuring sperm concentration compared to other methods or devices within the given range of confidence. ANOVAs revealed relevant differences in the three methods of motility estimation. Overall, differences in boar sperm concentration and motility estimates were found using various methods, but further studies are needed for better characterization of these differences.

Optimization of human semen analysis using CASA-Mot technology

The purpose of this study is to investigate the optimal framerate (FR) and the use of different counting chambers for improving CASA-Mot technology use in Andrology. Images were captured at 500 fps, then segmented and analyzed in several ranges of FRs (from 25 to 250) to define the asymptotic point that as an optimal FR. This work was replicated using counting chambers based in capillarity (disposable) or drop displacement (reusable) to study their effects on the motility results and kinematic values of the samples under the different experimental conditions. The α value (asymptote corresponding to FR_o) of the exponential curve was 150.23 fps, corresponding to a VCL of 130.58 mm/s, far from the value of 98.89 mm/s corresponding to 50 fps (the highest FR used by most current CASA-Mot systems). Our results have shown that, when using reusable counting chambers, type and depth have influence. In addition, different results were obtained depending on the area of image captured inside the different counting chamber types. To have reliable results in human sperm kinematic studies, almost 150 fps should be used for capturing and analyzing and differences between chambers should be considered by sampling from different areas, to obtain a representative value of the whole sample.

Total Aseptization of Boar Semen, to Increase the Biosecurity of Reproduction in Swine

The aim of the study was to establish the complete microbiological profile of boar semen (Sus scrofa domesticus) and to choose the most effective antiseptic measures in order to control and optimize AI reproduction in pig farms. One hundred and one semen samples were collected and analyzed from several pig farms. The microbiological profile of ejaculates was determined by evaluating the degree of contamination of fresh semen and after dilution with specific extenders. The bacterial and fungal load of fresh boar semen recorded an average value of 82.41/0.149 × 10³ CFU/mL, while after diluting the ejaculates the contamination value was 0.354/0.140 × 10³ CFU/mL. Twenty-four germs (15 bacterial and 9 fungal species) were isolated, the most common being Candida parapsilosis/sake (92%) and Escherichia coli (81.2%). Modification of the sperm collection protocol (HPBC) reduced contamination in raw sperm by 49.85% in bacteria (significant (p < 0.00001) and by 9.67% in fungi (non-significant (p < 0.111491). The load in bacteria and filamentous fungi can be controllable, but not in levuras fungi. Some fluconazole-added extenders (12.5 mg%), ensure fungal aseptization, and even an increase in sperm progressivity (8.39%) for at least a 12 h shelf life after dilution. Validation of sperm aseptization was done by maintaining sow fecundity unchanged after AI (insignificant p > 0.05).

Comparison of commercially available chamber slides for computer-aided analysis of human sperm

Despite the increasing use of computer-aided sperm analysis (CASA) in clinical practice, there is still no golden standard for the type of slide to be used with these systems. Counting chamber depth and loading method, can profoundly influence motility and concentration estimates, thereby undermining the validity and accuracy of CASA. To contribute toward standardized sperm analysis, this study compared different commercially available capillary-filled slides including 10 and 20 µm deep Leja slides (Leja10 and Leja20); 10, 16 and 20 µm deep CellVision slides (CV10, CV16 and CV20); and drop-loaded slides including slide and coverslip (SCS) with a depth of 20.1 µm and the Makler chamber with a depth of 10 µm for sperm analysis when using CASA. The Sperm Class Analyzer (SCA) CASA system was used to assess concentration, motility, and detailed kinematic parameters of 20 normozoospermic human samples using the different chamber slides. Results were evaluated by the repeated measures ANOVA and Intraclass correlation coefficients. The Makler chamber showed significantly (P < 0.05) higher concentrations than other slides. However, there was no significant difference in the percentage of sperm in different motility groups among the slides. CV10, Leja10 and Makler showed significantly higher curvilinear-, average path- and straight-line velocity (VCL, VAP, VSL) values than other slides. In conclusion, despite the objectiveness of the assessments by CASA systems, there are still some discrepancies in the results of sperm concentration, motility and other kinematic parameters when using different commercially available slides. The possible negative influence of the sperm quality misdiagnosis on the selection of treatment strategy in a clinical setting, emphasizes the need for further standardization and quality control of the commercially available chamber slides for use with CASA. Furthermore, this study found more consistent results for capillary-filled chambers compared to drop-loaded slides, suggesting a superior method when using CASA.Abbreviations: DNA: Deoxyribonucleic acid; CASA: Computer-aided semen analysis; SCA: Sperm Class Analyzer; WHO: World Health Organization; CV: CellVision; SCS: Slide and Coverslip; SD: Standard deviation; ANOVA: Analysis of Variance; PR: Progressive; NP: Non-progressive; IMT: Immotile; VCL: Curvilinear velocity; VAP: Average path velocity; VSL: Straight-line velocity; Lin: Linearity; STR: Straightness; WOB: Wobble; ALH: Amplitude of lateral head displacement; BCF: Beat cross frequency.

Optimal frame rate when there were stallion sperm motility evaluations and determinations for kinematic variables using CASA-Mot analysis in different counting chambers

This study was conducted to determine optimum image capture frame rates (FRO) when there was evaluation of different types of counting chambers used for CASA-Mot determinations of stallion sperm motility. Sperm VCL was determined at frame rates of 25-250 f/s in: 1) Spermtrack® (Spk) 10 and 20 chambers (drop displacement-type chambers 10 and 20 μm-deep respectively; and 2) ISAS®D4C10, ISAS®D4C20 (10 and 20 μm-deep respectively) and ISAS®D4C20 L (20 μm-deep) capillary loaded chambers. Values for different sperm kinematic variables were determined using each chamber at 250 f/s, which is the maximum frame rate that the software can be used for analyses. With evaluation of Spk chambers, there was a greater curvilinear velocity (VCL), average path velocity (VAP), straight line velocity (STR), amplitude of lateral head displacement (ALH) and beat cross frequency (BCF) values (P < 0.05) than with capillary loaded chambers, with there being greatest values with 20 μm-deep chambers. With the Spk10 chamber, VCL and ALH were greater at the chamber centre than periphery. There were no such differences for the Spk20 chamber. With evaluation of the D4C10 chamber, VSL and STR were less when there was a sperm deposition point towards the chamber end, while there were the opposite for the D4C20 chamber. When there was evaluation of the D4C20 chamber, there were also greater VCL, WOB and BCF values in distal areas. With use of most of these chambers, data should be collected from different fields and means determined, however, this is not necessary with Spk20 chambers.

Optimization of CASA-Mot Analysis of Donkey Sperm: Optimum Frame Rate and Values of Kinematic Variables for Different Counting Chamber and Fields

Simple Summary

A reliable sperm motility exam is important for semen analysis and breeding soundness examination. Different parameters can affect the Computer Assisted Sperm Analysis (CASA) motility results. Today, new high-resolution cameras and different chambers are introduced to CASA systems, and protocol optimization is required to render the estimation results for donkey sperm. The objective of this study is the optimization of the conditions used for donkey semen motility analysis with CASA-Mot by defining the optimum frame rate for different chamber types. Additionally, to study the effect of different chamber types, chamber field and sperm dilution on the sperm kinematic parameters with higher frame rates are examined.

Abstract

In order to optimize the donkey sperm motility analysis by the CASA (Computer Assisted Sperm Analysis)-Mot system, twelve ejaculates were collected from six jackasses. Capillary loaded chamber (CLC), ISAS^®D4C depths 10 and 20 µm, ISAS^®D4C Leja 20 and drop displacement chamber (DDC), Spermtrack^® (Spk) depths 10 and 20 µm were used. Sperm kinematic variables were evaluated using each chamber and a high-resolution camera capable of capturing a maximum of 500 frames/second (fps). The optimum frame rate (OFR) (defined according to curvilinear velocity—VCL) was dependent on chamber type. The highest OFR obtained was 278.46 fps by Spk20. Values for VCL, straight-line velocity (VSL), straightness (STR), amplitude of lateral head displacement (ALH) and beat cross frequency (BCF) were high in DDC and 10 µm depth. In both DDC 10 and 20 µm, the sperm velocities (VCL, VSL, VAP) and ALH values decreased significantly from the centre to the edges, while Wobble and BCF increased. No defined behavior was observed along the CLC. However, all the kinematic variables had a higher value in a highly concentrated sample, in both chamber types. In conclusion, analyzing a minimum of nine fields at 250 fps from the centre to the edges in Spk10 chamber using a dilution of 30 × 10⁶ sperm/mL offers the best choice for donkey computerised sperm motility analysis.

Effect of Sperm Concentration and Storage Temperature on Goat Spermatozoa during Liquid Storage

The use of cooled semen is relatively common in goats. There are a number of advantages of cooled semen doses, including easier handling of artificial insemination (AI) doses, transport, more AI doses per ejaculate, and higher fertility rates in comparison with frozen AI doses. However, cooled semen has a short shelf life. The objective of this study was to examine the effect of temperature and sperm concentration on the in vitro sperm quality during liquid storage for 48 h, including sperm motility and kinetics, response to oxidation, mitochondrial membrane potential (MMP) and DNA fragmentation in goats. Three experiments were performed. In the first, the effects of liquid preservation of semen at different temperatures (5 °C or 17 °C), durations (0, 24 and 48 h) and sperm concentrations (250 × 10⁶ sperm/mL (1:2 dilution rate), 166.7 × 10⁶ sperm/mL (1:3 dilution rate) or 50 × 10⁶ sperm/mL (1:10 dilution rate)) on sperm motility and kinetics were studied. In the second experiment, the effect of temperature, sperm washing and concentration on sperm motility and DNA fragmentation was studied. Finally, the effect of sperm concentration and duration of storage at 5 °C on sperm motility, response to oxidative stress and MMP was examined. We found that refrigerated liquid storage of goat sperm impaired sperm quality, such as motility, MMP and response to oxidation, as storage time increased; however, sperm DNA fragmentation index was not significantly affected. Liquid storage at 5 °C preserved higher total motility than at 17 °C. Moreover, we observed that the reduction of sperm concentration below 500 × 10⁶ sperm/mL did not seem to improve the quality of spermatozoa conserved in milk-based extender in the conditions tested.

Padronização do Sperm Class Analyzer® (SCA®) para avaliação de espermatozoides equinos criopreservados

RESUMO Objetivou-se, no primeiro experimento, avaliar o efeito da velocidade de captura de imagens de 25Hz, 30Hz e 50Hz na cinética dos espermatozoides equinos criopreservados. Todas as velocidades mostraram-se adequadas para capturar o movimento espermático (P>0,05). No segundo experimento, objetivou-se avaliar o efeito da deposição de sêmen em lâmina sob lamínula, Leja®10 e 20, na cinética espermática. O uso de lâmina e lamínula foi superior às lejas para manter a LIN e o WOB (P<0,05). No terceiro experimento, objetivou-se avaliar o efeito das concentrações de 25, 50 e 100x106 na cinética espermática. As concentrações de 25 e 50 x106 foram superiores a 100x106 para preservar a LIN, a STR e a BCF e não afetar negativamente a motilidade (P<0,05). No quarto experimento, objetivou-se avaliar o efeito dos diluidores BotuCrio®, BotuSêmen®, TALP sperm e da solução fisiológica na cinética espermática. O BotuCrio® foi superior a todos os diluidores em preservar a BCF e os hiperativos (P<0,05). Conclui-se que o emprego da velocidade de captura entre 25 e 50Hz, a deposição do sêmen entre lâmina e lamínula e a rediluição em diluidor de congelação para atingir 25 a 50x106 de espermatozoides/mL são ideais para o SCA® avaliar, de forma fidedigna, o sêmen equino criopreservado.

CASA-Mot in mammals: an update

Sperm motility is one of the most widely used parameters of sperm quality. Computer-aided sperm motility analysis (CASA-Mot) systems were developed to reduce the subjectivity of sperm motility assessment, and have had broad scientific and practical acceptance. In this review, the sources of variation and current applications of this technology and its relationships with other sperm quality tests are described in detail. Despite remarkable advances in the technique, there is still great need for standardisation in many species, and the numerous factors that affect the results make it difficult to provide universally accepted criteria for classifying semen samples based on sperm motility characteristics. The main fields for CASA-Mot include the study of male fertility and pathologies, evaluation of the effects of physical and chemical agents, improvement of epidemiological survey studies, more precise calculation of seminal doses for farm animals, realisation of basic studies about sperm function, improvement of sperm technologies such as cryopreservation and quality control analysis. Numerous relationships have been established between CASA-Mot and other sperm quality tests, although most of these parameters are complementary. Future CASA-Mot systems will probably be able to integrate several sperm quality parameters with motility.

Combined effects of type and depth of counting chamber, and rate of image frame capture, on bull sperm motility and kinematics

Semen quality assessment requires accurate, reliable and objective methods for examination of sperm variables including sperm motility. For preparation of semen samples for artificial insemination, as a genetic resource, samples that are used for insemination need to have the capacity to result in a highly acceptable fertility rate. Several methods have been developed for evaluation of bull sperm in laboratory conditions and for preparation of doses for artificial insemination. Computer-assisted semen analyses can provide objective information on various sperm variables. Nevertheless, this equipment requires fine-calibrations considering differences among species, breeds and conditions for sample evaluation and data analyses. In the present study, there was examination of the interaction between factors such as image frame rate and type and depth of counting chamber in which sperm were evaluated, together with differences between bulls of four breeds. The use of the Spermtrack® reusable 10 μm-depth chamber provided more reliable results than results obtained using disposable chambers (10 and 20 μm depth). A capture rate of at least 90 fps is required for assessment of sperm motility percentage, whereas a rate of 250 fps is needed for obtaining consistent kinematic data. Differences among breeds in the present study indicate conditions for sperm analyses should include specific equipment calibrations for each breed. These results contribute to development of more precise conditions for assessments of bull sperm quality taking into account breed differences and the requirement each breed has for the adequate evaluation and preparation of samples for artificial insemination.

Dog sperm swimming parameters analysed by computer-assisted semen analysis of motility reveal major breed differences

Dogs have undergone an intensive artificial selection process ever since the beginning of their relationship with humans. As a consequence, a wide variety of well-defined breeds exist today. Due to the enormous variation in dog phenotypes and the unlikely chance of gene exchange between them, the question arises as to whether they should still be regarded as a single species or, perhaps, they be considered as different taxa that possess different reproductive traits. The aim of this study was therefore to characterize some male reproductive traits, focusing on kinematic characteristics of dog spermatozoa from several breeds. Thirty-seven dogs from the following breeds were used: Staffordshire Bull Terrier, Labrador Retriever, Spanish Mastiff, Valencian Rat Hunting Dog, British Bulldog and Chihuahua. Semen samples were obtained via manual stimulation and diluted to a final sperm concentration of 50 million/ml, and they were subsequently analysed by the computer assisted semen analysis (CASA-Mot) ISAS^® v1 system. Eight kinematic parameters were evaluated automatically. All parameters showed significant different values among breeds and among individuals within each breed. The fastest sperm cells were those of Staffordshire Bull Terriers and the slowest were recorded in Chihuahuas. The intra-male coefficient of variation (CV) was higher than the inter-male CV for all breeds with the Staffordshire Bull Terrier showing the lowest values. When taking into consideration the cells by animal and breed, discriminant analyses showed a high capability to predict the breed. Cluster analyses showed a hierarchical classification very close to that obtained after phylogenetic studies with genome markers. In conclusion, future workers on dog spermatozoa should bear in mind major differences between breeds and realize that results cannot be extrapolated from one to another. Because sperm characteristics are associated with breed diversity, dogs may represent a good model to examine changes in reproductive parameters associated with selection processes.

Combined effect of type and capture area of counting chamber and diluent on Holstein bull sperm kinematics

The evaluation of sperm motion is crucial for processing of seminal doses for artificial insemination. Here, the combined effect of the type and capture area of three counting chambers, together with the type of diluent employed, on sperm motility was analysed. Ejaculates from thirteen Holstein bulls were used for sperm kinematic analysis with the ISAS^® v1 CASA-Mot system, using two capillary-loaded counting chambers (Leja^® and Cell-Vu^® ) and one drop displacement chamber (Makler^® ). Nine fixed positions were analysed per chamber type, considering central and lateral and three longitudinal fields. Independent of the diluent used, differences were found between the three chambers. Independent of the extender, no differences in x-axis were observed with Cell-Vu^® , while using Leja^® , some parameters showed lower values in the centre than in lateral areas. In both counting chambers, the lowest values were observed in the distal area. Results obtained with the two diluents were highly different with a very low correlation between them. In conclusion, the capture area inside the chambers leads to significant changes in sperm kinematic parameters and different dilution media introduce considerable differences in the motility patterns. It is necessary to optimise sampling methods and specific set-ups to be used with CASA-Mot technology.

CASA-Mot technology: how results are affected by the frame rate and counting chamber

For over 30 years, CASA-Mot technology has been used for kinematic analysis of sperm motility in different mammalian species, but insufficient attention has been paid to the technical limitations of commercial computer-aided sperm analysis (CASA) systems. Counting chamber type and frame rate are two of the most important aspects to be taken into account. Counting chambers can be disposable or reusable, with different depths. In human semen analysis, reusable chambers with a depth of 10µm are the most frequently used, whereas for most farm animal species it is more common to use disposable chambers with a depth of 20µm . The frame rate was previously limited by the hardware, although changes in the number of images collected could lead to significant variations in some kinematic parameters, mainly in curvilinear velocity (VCL). A frame rate of 60 frames s-1 is widely considered to be the minimum necessary for satisfactory results. However, the frame rate is species specific and must be defined in each experimental condition. In conclusion, we show that the optimal combination of frame rate and counting chamber type and depth should be defined for each species and experimental condition in order to obtain reliable results.

Extender Supplementation with Antioxidants Selected after the Evaluation of Sperm Susceptibility to Oxidative Challenges in Goats

This study aimed to detect the most deleterious ROS for goat sperm and then supplemented the extender with a proper antioxidant. For this, 12 adult goats (aged 1-7) were used. Fresh samples were submitted to challenge with different ROS (superoxide anion, hydrogen peroxide, and hydroxyl radical) and malondialdehyde (MDA-toxic product of lipid peroxidation). After experiment 1, sperms were cryopreserved in extenders supplemented to glutathione peroxidase (Control: 0 UI/mL; GPx1: 1 UI/mL; GPx5: 5 UI/mL, and GPx10: 10 UI/mL) and catalase (Control: 0 UI/mL; CAT60: 60 UI/mL; CAT120: 120 UI/mL, and CAT240: 240 UI/mL). Each sample was evaluated by motility, plasma membrane integrity (eosin/nigrosin), acrosome integrity (fast green/rose bengal), sperm morphology, assay of the sperm chromatin structure, mitochondrial activity (3,3-diaminobenzidine), and measurement of lipid peroxidation (thiobarbituric acid reactive substances [TBARS]). It was possible to observe a mitochondrial dysfunction (DAB-Class IV) and low membrane integrity after hydrogen peroxide action. However, the high rates of TBARS were observed on hydroxyl radical. CAT240 presents the lower percentage of plasma membrane integrity. It was possible to attest that hydrogen peroxide and hydroxyl radical are the more harmful for goat sperm. Antioxidant therapy must be improving perhaps using combination between antioxidants.