Encapsulation of protease from Aspergillus oryzae and lipase from Thermomyces lanuginoseus using alginate and different copolymer types

Immobilization of α-amylase in calcium alginate-gum odina (CA-GO) beads: An easily recoverable and reusable support

A natural polysacharide, gum odina was collected from Odina wodier tree and purified. Purified gum odina was used with sodium alginate for immobilization of α-amylase. Calcium alginate-gum odina (CA-GO) beads were prepared by ionotropic gelation method to find the improvement of immobilization efficiency and reusability of α-amylase over calcium alginate (CA) beads. XRD, SEM, FTIR, beads diameter, enzyme leaching from beads, moisture content, total soluble matter and swelling study have been carried out to understand the physical morphology and mechanism of immobilization of enzyme in beads matrix. It has been observed that if the polymer ratio changes (keeping enzyme conc. & calcium Chloride conc. constant) then the size and shape of the beads will vary and at a particular range of polymer ratio, the optimal beads forms. At a certain conc.(4%w/v of SA and 1%w/v GO), the immobilization efficiency of CA-GO and CA beads were 92.71 ± 0.85 % (w/w) and 89.19 ± 0.35 %(w/w) respectively. After 8th time use, the CA-GO beads remain (~4 fold) more active than that of CA beads. The FTIR confirms that GO does not interfere with α-Amylase and alginate. Here, it can be concluded that CA-GO beads show better efficiency in respect to immobilization, reusability than CA beads only.

Recent advancements in encapsulation of chitosan-based enzymes and their applications in food industry

Enzymes are readily inactivated in harsh micro-environment due to changes in pH, temperature, and ionic strength. Developing suitable and feasible techniques for stabilizing enzymes in food sector is critical for preventing them from degradation. This review provides an overview on chitosan (CS)-based enzymes encapsulation techniques, enzyme release mechanisms, and their applications in food industry. The challenges and future prospects of CS-based enzymes encapsulation were also discussed. CS-based encapsulation techniques including ionotropic gelation, emulsification, spray drying, layer-by-layer self-assembly, hydrogels, and films have been studied to improve the encapsulation efficacy (EE), heat, acid and base stability of enzymes for their applications in food, agricultural, and medical industries. The smart delivery design, new delivery system development, and in vivo releasing mechanisms of enzymes using CS-based encapsulation techniques have also been evaluated in laboratory level studies. The CS-based encapsulation techniques in commercial products should be further improved for broadening their application fields. In conclusion, CS-based encapsulation techniques may provide a promising approach to improve EE and bioavailability of enzymes applied in food industry.HighlightsEnzymes play a critical role in food industries but susceptible to inactivation.Chitosan-based materials could be used to maintain the enzyme activity.Releasing mechanisms of enzymes from encapsulators were outlined.Applications of encapsulated enzymes in food fields was discussed.

Sustainable Pest Management Using Biodegradable Apitoxin-Loaded Calcium-Alginate Microspheres

Alternatives and replacements for synthetic chemical-based plant protectants are required. In this study biopolymeric microspheres containing arthropod-derived apitoxin are explored as a possible novel environmentally friendly formulation for plant protection. Here we document the optimization process for microencapsulation of apitoxin into a stable formulation, for ready use in agricultural applications. Efficacy trials were carried out on three different beetle species at various developmental stages (Leptinotarsa decemlineata (Say, 1824.), Tenebrio molitor (Linnaeus, 1758.), Sitophilus granarius (Linnaeus, 1758.)). The encapsulated apitoxin has a steady initial and long residual effect, due to the slow release of apitoxin which is one of its main advantages over other conventional control methods. Microspheres loaded with apitoxin have a detrimental effect on insects, of which it is significantly better gastric compared to contact action (due to pH). The results showed that the highest and fastest mortality was obtained when the highest concentrations (0.6%) were applied, chosen to be economically acceptable. These important findings contribute to knowledge on the application and development of encapsulated apitoxin formulations, and their effectiveness, as an alternative eco-friendly control method in agricultural production.

Immobilized Alcalase on Micron- and Submicron-Sized Alginate Beads as a Potential Biocatalyst for Hydrolysis of Food Proteins

Enzymatic hydrolysis of food proteins is convenient method to improve their functional properties and physiological activity. Herein, the successful covalent attachment of alcalase on alginate micron and submicron beads using the carbodiimide based chemistry reaction and the subsequent application of the beads for egg white and soy proteins hydrolysis were studied. In addition to the electrostatic extrusion technique (EE) previously used by others, the potential utilization of a novel ultrasonic spray atomization technique without drying (UA) and with drying (UAD) for alginate submicron beads production has been attempted. The immobilization parameters were optimized on microbeads obtained by EE technique (803 ± 23 µm) with respect to enzyme loading and alcalase activity. UA and UAD techniques resulted in much smaller particles (607 ± 103 nm and 394 ± 51 nm in diameter, respectively), enabling even higher enzyme loading of 671.6 ± 4 mg g−1 on the carrier and the highest immobilized alcalase activity of 2716.1 IU g−1 in the standard reaction. The UAD biocatalyst exhibited also better performances in the real food system based on egg white or soy proteins. It has been shown that the immobilized alcalase can be reused in seven successive soy protein hydrolysis cycles with a little decrease in the activity.

Optimization of Microbial Rennet Encapsulation in Alginate - Chitosan Nanoparticles

The milk-coagulating enzyme, rennet, is widely used in cheese making. Recently stabilization of rennet, especially in accelerated cheese ripening, has received considerable interest. As we know encapsulation is one of the enzyme immobilization methods, which could increase enzyme stability. In this study, the effects of alginate, chitosan and, CaCl₂ on rennet encapsulation were evaluated and optimized using RSM. Under the optimal conditions alginate, chitosan, and CaCl₂ were 0.04%, 0.1%, and 0.1% respectively. At the optimum point, encapsulation efficiency, particle size, and zeta potential were evaluated to be 61.8%, 323 nm, and 25 mV, respectively. The effect of temperature and pH on the enzyme activity was evaluated, and the results showed that encapsulated enzyme had higher activity at various pH and temperature in comparison with the free enzyme. Also, the enzyme release data in all pH values were fitted to Korsmeyer-Peppas model and the n exponent indicated that the release mechanism was Fickian. The electrostatic interactions between enzyme, alginate, and chitosan were confirmed by infrared spectroscopy. No statistical difference was found between the K_m and V_max of encapsulated and free enzymes.

Synthesis, Characterization, and Encapsulation of Novel Plant Growth Regulators (PGRs) in Biopolymer Matrices

Novel plant growth regulators (PGRs) based on the derivatives of dehydroamino acids 2,3-dehydroaspartic acid dimethyl ester (PGR1), Z-isomer of the potassium salt of 2-amino-3-methoxycarbonylacrylic acid (PGR2) and 1-methyl-3-methylamino-maleimide (PGR3) have been synthesized and their growth-regulating properties investigated. Laboratory testing revealed their plant growth-regulating activity. PGR1 showing the most stimulating activity on all laboratory tested cultures were used in field experiments. Results showed that PGR1 is a highly effective environmentally friendly plant growth regulator with effects on different crops. Biopolymeric microcapsule formulations (chitosan/alginate microcapsule loaded with PGR) suitable for application in agriculture were prepared and characterized. Physicochemical properties and release profiles of PGRs from microcapsule formulations depend on the molecular interactions between microcapsule constituents including mainly electrostatic interactions and hydrogen bonds. The differences in the microcapsule formulations structure did not affect the mechanism of PGRs release which was identified as diffusion through microcapsules. The obtained results opened a perspective for the future use of microcapsule formulations as new promising agroformulations with a sustained and target release for plant growth regulation.

Physicochemical properties and enzymatic activity of wheat germ extract microencapsulated with spray and freeze drying

Wheat germ is produced as a by-product during wheat milling operations and is a relatively inexpensive protein source that, in spite of its exclusive nutritional properties, is mostly used for animal feed formulation and has limited use in the food industry. In this study, wheat germ extract (WGE) was microencapsulated by spray and freeze drying and with different ratios of maltodextrin to whey protein concentrate (M-W) as the coating material and then physicochemical properties of the microcapsules were evaluated. Results showed decreased moisture content and increased solubility, lipase activity, acid phosphatase activity, and both lipase and acid phosphatase microencapsulation efficiency with increasing M-W ratios in both drying methods. The M-W ratios had no significant effects on the DPPH free radical scavenging activity in both methods. With increasing M-W ratios, particle size decreased and bulk density increased in the spray drying method, while particle size increased and bulk density decreased in the freeze drying method. Spray drying elevated solubility, DPPH free radical scavenging activity, lipase activity, acid phosphatase activity, and both lipase and acid phosphatase microencapsulation efficiency, in comparison with the freeze drying method.

Characterization and immobilization of protease secreted by the fungus Moorella speciosa

Protease was extracellularly produced in submerged fermentation by the fungus Moorella speciosa with maximum activity of 8.6 × 10³ U/mL. The optimal pH and temperature for enzyme activity were 6.78 and 60.88 °C, respectively. The enzyme was incubated in the presence of several ions at concentrations of 0.1 M and 0.01 M to address the effect on enzyme activity. Enzyme activity was increased by 56% and 130% in the presence of 0.1 M BaCl₂ and of 0.01 M Na₂SO₄, respectively. The V _max and K _m values were 0.01474 U/min/mg protein and 0.04190 mg/mL, respectively. The enzyme retained about 90% of enzymatic activity at 90 °C. Among the methods tested for enzyme immobilization, adsorption onto MAT540 carrier led to the most promising results, since after 15 reuse cycles up to 60% of the initial catalytic activity was retained. Entrapment in calcium alginate matrix allowed to retain up to 51% of the initial catalytic activity after 8 reuse cycles. This protease from M. speciosa, in either free or immobilized form, can be foreseen as a useful biocatalytic tool in process design by reducing operating costs, decreasing the use of chemical processing and, consequently, meeting the global demand for clean technologies.