Coupled neutronic/thermal-hydraulic hot channel analysis of high power density civil marine SMR cores

Neutronic investigation of alternative & composite burnable poisons for the soluble-boron-free and long life civil marine small modular reactor cores

Concerns about the effects of global warming provide a strong case to consider how best nuclear power could be applied to marine propulsion. Currently, there are persistent efforts worldwide to combat global warming, and that also includes the commercial freight shipping sector. In an effort to decarbonize the marine sector, there are growing interests in replacing the contemporary, traditional propulsion systems with nuclear propulsion systems. The latter system allows freight ships to have longer intervals before refueling; subsequently, lower fuel costs, and minimal carbon emissions. Nonetheless, nuclear propulsion systems have remained largely confined to military vessels. It is highly desirable that a civil marine core not use soluble boron for reactivity control, but it is then a challenge to achieve an adequate shutdown margin throughout the core life while maintaining reactivity control and acceptable power distributions in the core. High-thickness ZrB₂ 150 μm Integral Fuel Burnable Absorber (IFBA) is an excellent burnable poison (BP) candidate for long life soluble-boron-free core. However, in this study, we want to minimize the use of 150 μm IFBA since B-10 undergoes an (n, α) capture reaction, and the resulting helium raises the pressure within the plenum and in the cladding. Therefore, we have considered several alternative and novel burnable BP design strategies to minimize the use of IFBA for reactivity control in this study: (Case 1) a composite BP: gadolinia (Gd₂O₃) or erbia (Er₂O₃) with 150 μm thickness ZrB₂ IFBA; (Case 2) Pu-240 or Am-241 mixed homogeneously with the fuel; and (Case 3) another composite BP: Pu-240 or Am-241 with 150 μm thickness ZrB₂ IFBA. The results are compared against those for a high-thickness 150 μm 25 IFBA pins design from a previous study. The high-thickness 150 μm 25 IFBA pins design is termed the “IFBA-only” BP design throughout this study. We arrive at a design using 15% U-235 fuel loaded into 13 × 13 assemblies with Case 3 BPs (IFBA+Pu-240 or IFBA+Am-241) for reactivity control while reducing 20% IFBA use. This design exhibits lower assembly reactivity swing and minimal burnup penalty due to the self-shielding effect. Case 3 provides ~10% more initial (beginning-of-life) reactivity suppression with ~70% less reactivity swing compared to the IFBA-only design for UO₂ fuel while achieving almost the same core lifetime. Finally, optimized Case 3 assemblies were loaded in 3D nodal diffusion and reactor model code. The results obtained from the 3D reactor model confirmed that the designed core with the proposed Case 3 BPs can achieve the target lifetime of 15 years while contributing to ~10% higher BOL reactivity suppression, ~70% lower reactivity swings, ~30% lower radial form factor and ~28% lower total peaking factor compared to the IFBA-only core.