Photocatalytic activity and NIR laser response of polyaniline conjugated graphene nanocomposite prepared by a novel acid-less method

An oxygen vacancy-rich BiO2-x/COF heterojunction for photocatalytic degradation of diclofenac

A BiO2-x/COF composite was successfully synthesized by simple mechanical ball milling. Compared to pure BiO2-x and COFs, the BiO2-x/COF composite (1 : 9) showed superior photocatalytic capability. Under visible light irradiation for 90 min, the photocatalytic degradation rate of DCF reached 97%. In addition, the characterization results showed that the formation of heterojunctions and the increase in oxygen vacancy concentration were the reasons for the enhancement of the photocatalytic activity. It is confirmed by free radical capture experiments that ˙O2- and h+ are the main reactive substances in the photocatalytic process. The photocatalytic degradation mechanism of the composite and the photocatalytic degradation pathway of diclofenac were deduced.

In-Sb Covalent Bonds over Sb2Se3/In2Se3 Heterojunction for Enhanced Photoelectrochemical Water Splitting

Antimony selenide is a promising P-type photocatalyst, but it has a large number of deep energy level defects, leading to severe carrier recombination. The construction of a heterojunction is a common way to resolve this problem. However, the conventional heterojunction system inevitably introduces interface defects. Herein, we employ in situ synthesis to epitaxially grow In2Se3 nanosheets on Sb2Se3 nanorods and form In-Sb covalent interfacial bonds. This petal-shaped heterostructure reduced interface defects and enhanced the efficiency of carrier separation and transport. In this work, the photocurrent density in the proposed Sb2Se3/In2Se3 photocathode is 0.485 mA cm-2 at 0 VRHE, which is 30 times higher than that of pristine Sb2Se3 and it has prominent long-term stability for 24 h without obvious decay. The results reveal that the synergy of the bidirectional built-in electric field constructed between In2Se3 and Sb2Se3 and the solid In-Sb interfacial bonds together build a high-efficiency transport channel for the photogenerated carriers that display enhanced photoelectrochemical (PEC) water-splitting performance. This work provides efficient guidance for reducing interface defects via the in situ synthesis and construction of interfacial bonds.

Mechanistic investigation of cellulose regulating the morphology and photocatalytic activity of Al-doped ZnO

The morphology of metal oxide is a crucial factor for improving of catalysis properties. As a renewable and environmentally friendly biomass material, cellulose has been widely used to induce the morphology of semiconductors. The contributions of cellulose hydroxyl groups and spatial hindrance in tailoring Al doped ZnO (AZO) morphologies were investigated. The morphology of AZO could be gradually induced from flake-like to flower-like with the increase of cellulose hydroxyl content per unit volume. At the same time, the changes in spatial hindrance had no apparent effect on the morphology of AZO. So the cellulose hydroxyl groups that act to induce the in situ growth of AZO nanoparticles on cellulose substrates. The results further confirmed the strong interaction between cellulose hydroxyl groups and Zn²⁺. In addition, the photocatalytic activities of Al-doped ZnO/cellulose nanocomposites (AZOC) with different morphologies were evaluated by the degradation of bisphenol A (BPA). The high hydroxyl contents of cellulose substrates contributed to the growth of flower-like AZO with high light utilization and photocatalytic activity. This work proposed cleaner strategies to modify semiconductor morphologies for photocatalysis by regulating the content of cellulose hydroxyl contents.

The Cytotoxicity of Carbon Nanotubes and Hydroxyapatite, and Graphene and Hydroxyapatite Nanocomposites against Breast Cancer Cells

Cancer is a current dreadful disease and the leading cause of death. Next to cardiovascular diseases, cancer is the most severe threat to human life and health. Breast cancer is the most common invasive cancer diagnosed in women. Each year about 2.3 million women are diagnosed with breast cancer. In consideration of the severity of breast cancer, herein we designed the biocompatible nanomaterials, CNTs-HAP and GR-HAP, through grafting of hydroxyapatite (HAP) to carbon nanotubes (CNTs) and graphene (GR) nanosheets. CNTs-HAP and GR-HAP have been tested for their cytotoxicity, growth and motility inhibitory effects, and their effects on the mesenchymal markers. All these demonstrated significant dose-dependent and time-dependent in vitro cytotoxicity against SUM-159 and MCF-7 breast cancer cell lines. The cell viability assay showed that the CNTs-HAP was more effective over SUM-159 cells than MCF-7 cells. It found that the increase in the concentration of GR-HAP has inhibited the clonogenic ability of breast cancer cells. The GR-HAP exhibited a substantial inhibitory effect on the cell motility of SUM-159 cell lines. It was investigated that the expression of vimentin (mesenchymal marker) was majorly reduced in SUM-159 cells by GR-HAP.

Selective graphene-like metal-free 2D nanomaterials and their composites for photocatalysis

From the viewpoint of sustainability, graphene-like metal-free 2D nanomaterials (GMFs) hold great potential in different photocatalytic fields due to their distinct structures and properties. Although their lattice structures are highly similar, the properties of these nanomaterials are in vast diversity owing to the uniqueness of particular atomic arrangement, thus giving rise to their multi-faceted functionalities in photocatalytic process. In this review, we summarize the latest progress of GMFs and their hybrid composites in photocatalytic field, including graphene and its derivatives, hexagonal boron nitride (h-BN), graphitic carbon nitride (g-C₃N₄), black phosphorus (BP) and emerging 2D covalent organic frameworks (COFs). Their unique 2D structure and key photocatalytic properties are firstly briefly introduced. Then a critical discussion on their multiple roles in the activity enhancement of composite photocatalysts is emphasized, which in turn points out the direction of maximizing their functions and guides our efficient construction of hybrid photocatalysts based on above 2D nanomaterials. On this basis, a summary about the hybridization of above 2D metal-free materials is presented, and the merits of 2D/2D hybrid systems are elaborated. Last, we wrap up this review with some summative remarks, covering understanding their own unique strengths and weaknesses by comparison and proposing the major challenges and perspectives in this emerging field.

Near-Infrared-Responsive Photocatalysts

Broadening the absorption of light to the near-infrared (NIR) region is important in photocatalysis to achieve efficient solar-to-fuel conversion. NIR-responsive photocatalysts that can utilize diffusive solar energy are attractive for alleviating the energy crisis and environmental pollution. Over the past few years, considerable progress on the component and structural design of NIR-responsive photocatalysts have been reported. This study aims to systematically summarize recent progress toward the material design and mechanism optimization of NIR-responsive photocatalysts in this area. Depending on the main strategies for harvesting NIR photons, NIR-responsive photocatalysts can be categorized as direct NIR-light photocatalysts, indirect NIR-light photocatalysts, and photothermal photocatalysts. Furthermore, the construction and application of different NIR-responsive photocatalytic systems are summarized. Conclusions and perspectives are presented to further explore the potential of NIR-responsive photocatalysts in this field.

Photothermal effect and cytotoxicity of CuS nanoflowers deposited over folic acid conjugated nanographene oxide

Herein, we present the rational synthesis of a multimode photothermal agent, NGO-FA-CuS, for the advancement of photothermal therapy of cancer. The hierarchical architecture created in NGO-FA-CuS was attained by the covalent conjugation of folic acid (FA) to nanographene oxide (NGO) through amide bonding, followed by the hydrothermal deposition of CuS nanoflowers. In this approach, instead of mere mixing or deposition, FA was covalently bonded to NGO, which helped in retaining their intrinsic properties after binding and allowed to access them in the resulting hybrid nanostructure. In this specifically designed photothermal agent, NGO-FA-CuS, each component has an explicit task, i.e., NGO, FA and CuS act as the quencher, cancer cell-targeting moiety and photothermal transduction agent, respectively. Prior to the grafting of FA molecules and the deposition of CuS nanoflowers, sulfonic acid groups were introduced into NGO to provide stability under physiological conditions. Under irradiation using a 980 nm laser, NGO-FA-CuS was able to attain a temperature of 63.1 °C within 5 min, which is far beyond the survival temperature for cancer cells. Therefore, the resulting temperature recorded for NGO-FA-CuS was sufficient to induce hyperthermia in cancer cells to cause their death. When coming into contact with cancer cells, NGO-FA-CuS can cause a rapid increase in the temperature of their nucleus, destroy the genetic substances, and ultimately lead to exhaustive apoptosis under illumination using a near-infrared (NIR) laser. An excellent photothermal efficiency of 46.2% under illumination using a 980 nm laser and outstanding cytotoxicity against HeLa, SKOV3 and KB cells were attained with NGO-FA-CuS. Moreover, NGO-FA-CuS displays exceptional persistent photo-stability without photo-corrosiveness. The photothermal effect of NGO-FA-CuS was found to be dependent on its concentration and the power density of the laser source. It was found that its cytotoxicity toward cancer cells was enhanced with an increase in the concentration of NGO-FA-CuS and the incubation period.

Sulfonated polyaniline-encapsulated graphene@graphitic carbon nitride nanocomposites for significantly enhanced photocatalytic degradation of phenol: a mechanistic study

The photocatalytic degradation of phenol through -s-PANI@g-C₃N₄ and its nanocomposites with graphene.

Graphene Oxide Based Magnetic Nanocomposites with Polymers as Effective Bisphenol-A Nanoadsorbents

Magnetic graphene oxide was impregnated with polymers for the preparation of nanocomposite adsorbents to be examined for the adsorptive removal of a typical endocrine disruptor, bisphenol–A (BPA) from aqueous solutions. The polymers used were polystyrene, chitosan and polyaniline. The nanocomposites prepared were characterized for their structure, morphology and surface chemistry. The nanocomposites presented an increase adsorptive activity for BPA at ambient conditions, compared to pure magnetic oxide, attributed to the synergistic effect of the polymers and the magnetic graphene oxide. The increased adsorption of BPA exhibited by the nanocomposites with chitosan and polyaniline could be attributed to the contribution of amine groups.

Cobalt Phthalocyanine-Sensitized Graphene-ZnO Composite: An Efficient Near-Infrared-Active Photothermal Agent

Herein, a promising near-infrared-responsive photothermal agent was designed by anchoring of rice grain-shaped ZnO particles over graphene (GR) nanosheets and subsequent sensitization with cobalt phthalocyanine (CoPc). Thus, produced GR-ZnO-CoPc was able to attain the temperature of 68 °C by irradiating to 980 nm laser for 7 min, which is extremely higher than the endurance temperature of cancer cells. The linear fashioned progression in the photothermal effect of GR nanosheets was conquered by immobilization of ZnO particles and successive sensitization with CoPc. The excellence found in the photothermal effect of GR-ZnO-CoPc was verified by estimation of its photothermal conversion efficiency. The photothermal conversion efficiency assessed for GR-ZnO-CoPc was higher than those for the popular gold- and CuS-based photothermal agents. In addition, it possessed significant stability against photobleaching and structural rupture. It was found that the photothermal effect of GR-ZnO-CoPc is proportional to its concentration. However, by replacement of a 980 nm laser system with 808 nm, the photothermal effect of GR-ZnO-CoPc was reduced, which could be due to lower absorption of GR-ZnO-CoPc at 808 nm compared to 980 nm. On account of its significance and important properties, GR-ZnO-CoPc could be an interesting photothermal agent to employ in future photothermal therapy for cancer.

Polyaniline/Reduced Graphene Oxide Composite-Enhanced Visible-Light-Driven Photocatalytic Activity for the Degradation of Organic Dyes

Creation of an innovative composite photocatalyst, to advance its performance, has attracted researchers to the field of photocatalysis. In this article, a new photocatalyst based on polyaniline/reduced graphene oxide (PANI/RGO) composites has been prepared via the in situ oxidative polymerization method employing RGO as a template. For thermoelectric applications, though a higher percentage (50 wt %) of RGO has been used, for photocatalytic activity, lesser percentages (2, 5, and 8 wt %) of RGO in the composite have given a significant outcome. Furthermore, photoluminescence (PL) spectra, time-resolved fluorescence spectra, and Brunauer-Emmett-Teller surface area analyses confirmed the improved photocatalytic mechanism. PANI/RGO composites under visible light irradiation exhibit amazingly improved activity toward the degradation of cationic and anionic dyes in comparison with pristine PANI or RGO. Here, a PANI/RGO composite, with 5 wt % RGO(PG2), has emerged as the best combination with the degradation percentages of 99.68, 99.35, and 98.73 for malachite green, rhodamine B, and congo red within 15, 30, and 40 min, respectively. Experimental findings show that the introduction of RGO can relieve the agglomeration of PANI nanoparticles and enhance the light absorption of the materials due to an increased surface area. Moreover, the PG2 composite also showed excellent photocatalytic activity to reduce noxious Cr(VI). The effective removal of Cr(VI) up to 94.7% at pH 2 was observed within only 15 min. With the help of the active species trapping experiment, a plausible mechanism for the photocatalytic degradation has been proposed. The heightened activity of the as-synthesized composite compared to that of neat PANI or RGO was generally because of high concentrations of ^•OH radicals and partly of ^•O₂ ^- and holes (h⁺) as concluded from the nitroblue tetrazolium probe test and photoluminescence experiment. It is hoped that the exceptional photocatalytic performance of our work makes the conducting polymer-based composite an effective alternative in wastewater treatment for industrial applications.

Conjugated HCl-doped polyaniline for photocatalytic oxidative coupling of amines under visible light

Conjugated HCl-doped polyaniline acted as an efficient visible light-responsive nonmetal photocatalyst for imine green synthesis.

In situ preparation of highly stable polyaniline/W18O49 hybrid nanocomposite as efficient visible light photocatalyst for aqueous Cr(VI) reduction

In the present study, we prepared novel polyaniline supported W₁₈O₄₉ (PANI/W₁₈O₄₉) nanocomposite by in situ oxidative polymerisation method. We herein focused on enhancing the stability and the photocatalytic performance of W₁₈O₄₉. The prepared PANI/W₁₈O₄₉ was thoroughly characterized by FTIR, TEM, XRD, BET, UV-vis DRS and PL. The PANI support presented a great effect on the light harvesting and photo-charge transfer of the W₁₈O₄₉, and the optimum percentage of was found to be 10 wt%. As for treating Cr(VI), the effect of important water quality parameters (such as pH, ions, NOM, DO, temperature and SOAs) on photocatalytic performance was investigated under the visible light irradiation (λ > 420 nm). SOAs were shown to exert a dramatic accelerating influence on Cr(VI) reduction in the system. The obtained 10%-PANI/W₁₈O₄₉ can completely catalytically reduce 1 mM Cr(VI) in the presence of tartaric acid (1:3) within 50 min. Meanwhile, it can be recycled at ten times without any loss of photocatalytic efficiency, indicating the high stability of the as-prepared photocatalyst. The results of the study demonstrate the potential of the new obtained photocatalyst in efficient utilization of solar energy for treating aqueous Cr(VI).

Photothermal effect: an important aspect for the enhancement of photocatalytic activity under illumination by NIR radiation

A key auxiliary role of photothermal effect (PTE) in the enhancement of photocatalytic activity under illumination to near-infrared (NIR) radiations has been experimentally revealed. It was found that the photoexcitation of electrons, required for the process of photocatalysis does not occur in presence of NIR radiations alone without the support of both UV and visible radiations. Herein, a binary heterogeneous nanophotocatalyst, GR-ZnO was fabricated by a novel approach using hydrothermal process. In which ZnO nanotrapezoids were deposited over the surfaces of graphene nanosheets. In the reported unique approach, reduction of graphene oxide to graphene has been accomplished using water by an entirely alternative mechanism compared to traditional reduction processes those employ the hazardous reducing agents. Thus produced GR-ZnO photocatalyst has exhibited the excellence in rapid degradation of industrially voluntarily employing perilous dye, methyl orange. It is explored that PTE is mainly responsible for the rapid degradation of methyl orange transpired under illumination to NIR laser. Further, it has been established that PTE could not emerge with NIR radiations alone without the support of both UV and visible radiations. In consideration of its importance, PTE of GR-ZnO nanocatalyst has been revealed and compared with its individual components, viz., graphene and ZnO. Moreover, the photothermal conversion efficiency of GR-ZnO nanocatalyst was evaluated. Overall, the excellent catalytic activity found in GR-ZnO nanocatalyst was accounted for its decreased band gap, transpired by hybridization of ZnO with graphene could efficiently prevent the recombination of photo-generated charge carriers. In addition, admired catalytic activity of GR-ZnO nanocatalyst was attributed to improved optical absorption and enhancement in the adsorption affinity to methyl orange molecules.

Graphene-Coupled ZnO: A Robust NIR-Induced Catalyst for Rapid Photo-Oxidation of Cyanide

Herein, we report the modulation of ZnO for enhancement of its ability toward plasmonic absorption of near-infrared (NIR) photons through coupling of graphene (GR). The reported modification led GR-ZnO to be a promising photocatalyst by the complete removal of poisonous and nonvolatile potassium cyanide from water. The photocatalytic degradation of cyanide was revealed by exposing it to NIR laser and comparing with the rate of UV, visible, and sunlight using their apparent reaction rate constants derived from the Langmuir-Hinshelwood model. The heteronanostructured GR-ZnO promoted rapid photo-oxidation of cyanide under illumination with NIR laser rather than UV, visible, and sunlight. It was assessed that the photothermal effect (PTE) is the main cause for higher catalytic efficiency of GR-ZnO in the presence of NIR radiations. Except for the NIR radiations, GR-ZnO does not show any indication of PTE by irradiating with UV, visible, or sunlight. On account of its significance, the PTE of GR-ZnO in KCN solution was evaluated and compared with its individual components viz., GR and ZnO upon exposure to a 980 nm laser system. Furthermore, it has been revealed that the PTE of GR-ZnO was proportional to its concentration. In addition to its effectiveness in the degradation of cyanide, GR-ZnO retained its special structure and exhibited an outstanding photostability after its repeated use in three successive cycles.

Influence of carbon nanotubes and graphene nanosheets on photothermal effect of hydroxyapatite

Herein we present a successful strategy for enhancement of photothermal efficiency of hydroxyapatite (HAP) by its conjugation with carbon nanotubes (CNTs) and graphene nanosheets (GR). Owing to excellent biocompatibility with human body and its non-toxicity, implementation of HAP based nanomaterials in photothermal therapy (PTT) provides non-replaceable benefits over PTE agents. Therefore, in this report, it has been experimentally exploited that the photothermal effect (PTE) of HAP has significantly improved by its assembly with CNTs and GR. It is found that the type of carbon nanomaterial used to conjugate with HAP has influence on its PTE in such a way that the photothermal efficiency of GR-HAP was higher than CNTs-COOH-HAP under exposure to 980nm near-infrared (NIR) laser. The temperature attained by aqueous dispersions of both CNTs-COOH-HAP and GR-HAP after illuminating to NIR radiations for 7min was found to be above 50°C, which is beyond the temperature tolerance of cancer cells. So that the rise in temperature shown by both CNTs-COOH-HAP and GR-HAP is enough to induce the death of tumoral or cancerous cells. Overall, this approach in modality of HAP with CNTs and GR provide a great potential for development of future nontoxic PTE agents.