Standardization of 152Eu and 154Eu by 4πβ−4πγ coincidence method and 4π(β+γ) integral counting

Activity measurement of mixed complex radionuclide like 152Eu with different methods

¹⁵²Eu has been standardized by three independent 4π β-γ coincidence counting systems with beta detectors as proportional counter, plastic scintillator and liquid scintillator along with the CIEMAT/NIST method. The average activity concentration by primary methods was linked to key comparison reference value (KCRV) by comparing it with that of 4π γ ionization chamber (GIC) whose calibration factor was determined from the KCRV (BIPM.RI(II)-K1.Eu-152 and CCRI(II)-K2.Eu-152) and deviates from GIC by ± 0.16% indicating good agreement within standard uncertainties.

Development of a calculation software for 4πβ-γ digital coincidence counting and its application to 60Co and 152Eu activity measurements

A unique calculation software has been developed for 4πβ-γ coincidence counting system that has been recently set up. The combination of the software and the hardware constitutes the measurement system. The developed coincidence counting software uses both of coincidence and anticoincidence methods. Activity calculations have been performed using unique algorithms generated for these methods. The main processing modules of the software are the raw data reading-writing module, energy spectrum composing module, energy filtering module, deadtime application module, coincidence and anticoincidence calculation modules and efficiency extrapolation module. The known activities of ⁶⁰Co and ¹⁵²Eu solutions were measured to evaluate the measurement system and the developed software. The results showed that the hardware system and the software can successfully measure the activity of β-γ decay radionuclides which have complicated decay schemes.

Gamma geometry dependency of efficiency functions in the 4πβ-γ coincidence measurements of complex decaying nuclides

In order to clarify the γ-efficiency dependency of 4πβ-γ efficiency functions, a series of 4πβ-γ efficiency extrapolation measurements of a (134)Cs source were carried out for a wide variety of γ-geometries using a 4πβ(PS)-4πγ detector configuration. As the source is situated in the plastic scintillator (PS) β-detector, the γ-efficiency of the system can be readily changed by extracting the β-detector from the well-hole in a series of stages. For data acquisition and analyses, a list-mode two-parameter data acquisition system was employed. The forms of the extrapolation curves were monitored with decreasing γ-geometry, eventually exhibiting a similar behavior to those obtained in a usual 4πβ-γ coincidence counting system. The experimental results and considerations suggested that the γ-geometry dependency of the efficiency functions were due to summing effects in the γ-channel, and some qualitative remarks on the form of the extrapolation functions are given.

A simple and versatile data acquisition system for software coincidence and pulse-height discrimination in 4πβ-γ coincidence experiments

A simple but versatile data acquisition system for software coincidence experiments is described, in which any time stamping and live time controller are not provided. Signals from β- and γ-channels are fed to separately two fast ADCs (16 bits, 25 MHz clock maximum) via variable delay circuits and pulse-height stretchers, and also to pulse-height discriminators. The discriminating level was set to just above the electronic noise. Two ADCs were controlled with a common clock signal, and triggered simultaneously by the logic OR pulses from both discriminators. Paired digital signals for each sampling were sent to buffer memories connected to main PC with a FIFO (First-In, First-Out) pipe via USB. After data acquisition in list mode, various processing including pulse-height analyses was performed using MS-Excel (version 2007 and later). The usefulness of this system was demonstrated for 4πβ(PS)-4πγ coincidence measurements of (60)Co, (134)Cs and (152)Eu. Possibilities of other extended applications will be touched upon.

Primary activity measurements with a 4πβ-4πγ coincidence counting system

The radioactive concentrations of (166m)Ho, (134)Cs and (133)Ba solutions have been standardised using a 4πβ-4πγ coincidence counting system we have recently set up. The detection in the beta channel is performed using various geometries of a UPS-89 plastic scintillator optically coupled to a selected low-noise 1in. diameter photomultiplier tube. The light-tight thin capsule that encloses this beta detector is housed within the well of a 5in.×5in. NaI(Tl) monocrystal detector. The beta detection efficiency can be varied either by optical filtering or electronic discrimination when the electrons loose all their energy in the plastic scintillator. This 4πβ-4πγ coincidence system improves on our 4πβ(PC)-γ system in that its sample preparation is less labour intensive, it yields larger beta- and gamma-counting efficiencies thus enabling the standardisation of low activity sources with good statistics in reasonable time, and it makes standardising short-lived radionuclides easier. The resulting radioactive concentrations of (166m)Ho, (134)Cs and (133)Ba are found to agree with those measured with other primary measurement methods thus validating our 4πβ-4πγ coincidence counting system.