Influences of spherical phantom heterogeneities on dosimetric charactristics of miniature electronic brachytherapy X-ray sources: Monte Carlo study

Evaluation of bone dose arising from skin cancer brachytherapy: A comparison between 192Ir and 60Co sources through Monte Carlo simulations

PURPOSE

This study aimed to calculate and compare absorbed dose to bone following exposure to ¹⁹²Ir and ⁶⁰Co sources in high dose rate (HDR) skin brachytherapy. Moreover, effects of the bone thickness and soft tissue thickness before the bone on absorbed dose to the bone are evaluated .

MATERIALS AND METHODS

¹⁹²Ir and ⁶⁰Co sources inserted in Leipzig applicators with internal diameters of 1, 2 and 3 cm with/without their optimal flattening filters were simulated by MCNPX Monte Carlo code. Then, heterogeneous phantoms (including skin, soft tissue before and after the bone, cortical bone and bone marrow) were defined. Finally, relative depth dose values for the bone and other tissues in the heterogeneous phantoms were obtained and compared.

RESULTS

The average relative depth dose values of the skin, soft tissue before and after bone and bone marrow were almost similar for both ¹⁹²Ir and ⁶⁰Co sources, with a maximum difference less than 2%. However, a 0.1-6.8% difference was observed between average relative depth dose values of these two sources for the cortical bone. The results showed that with increasing the bone thickness and bone distance from the skin surface, the average relative depth dose values of the bone marrow and cortical bone decreased for both ¹⁹²Ir and ⁶⁰Co sources inserted in the applicators without/with their optimal flattening filters. For most of evaluated the applicators without/with their flattening filters, the average relative depth dose values of the bone marrow arisen from the ⁶⁰Co source were higher than those obtained from the ¹⁹²Ir source, while an opposite trend was observed for the cortical bone .

CONCLUSION

The obtained findings showed that the average relative depth dose values of ¹⁹²Ir and ⁶⁰Co sources at the corresponding depths of the designed heterogeneous phantoms were almost similar (expect for the cortical bone). Hence, it is concluded that ⁶⁰Co source can be used instead of ¹⁹²Ir source in HDR skin brachytherapy, particularly in developing countries.

Modeling of the direction modulated brachytherapy tandem applicator using the Oncentra Brachy advanced collapsed cone engine

PURPOSE

The direction modulated brachytherapy (DMBT) magnetic resonance-compatible tandem applicator, made from a tungsten alloy rod, has six symmetric peripheral grooves, designed specifically to enhance intensity modulation capacity through achieving directional radiation dose profiles. In this work, the directional dose distributions of the DMBT tandem were modeled and calculated with the Oncentra Brachy advanced collapsed cone engine (ACE), which was validated against Monte Carlo (MC) calculations.

METHODS AND MATERIAL

The prototype 3D tandem applicator model was created for use in the Oncentra Brachy treatment planning system. The ¹⁹²Ir source was placed inside a DMBT tandem in one and six channels as a single dwell position (DP) per channel with the same index length, as well as 1 DP in a standard tandem. Dose distributions were calculated in a water medium by both ACE and MC and compared.

RESULTS

For 1DP/6DP inside the DMBT and 1DP inside the standard tandem, respectively, the mean dose differences were 3.5/3.3% and <2.8% with the range of 0.1%-6.5%/0.2%-5% and 0.1%-5%, between ACE and MC, respectively.

CONCLUSIONS

The DMBT tandem is successfully modeled in a commercial treatment planning system. The ACE algorithm is capable of accurately calculating highly directional dose distributions generated by a dense tungsten alloy contained within the DMBT tandem, with agreements achieved within <3.5%.

HDR brachytherapy in vivo source position verification using a 2D diode array: A Monte Carlo study

PURPOSE

This study aims to assess the accuracy of source position verification during high-dose rate (HDR) prostate brachytherapy using a novel, in-house developed two-dimensional (2D) diode array (the Magic Plate), embedded exactly below the patient within a carbon fiber couch. The effect of tissue inhomogeneities on source localization accuracy is examined.

METHOD

Monte Carlo (MC) simulations of 12 source positions from a HDR prostate brachytherapy treatment were performed using the Geant4 toolkit. An Ir-192 Flexisource (Isodose Control, Veenendaal, the Netherlands) was simulated inside a voxelized patient geometry, and the dose deposited in each detector of the Magic Plate evaluated. The dose deposited in each detector was then used to localize the source position using a proprietary reconstruction algorithm.

RESULTS

The accuracy of source position verification using the Magic Plate embedded in the patient couch was found to be affected by the tissue inhomogeneities within the patient, with an average difference of 2.1 ± 0.8 mm (k = 1) between the Magic Plate predicted and known source positions. Recalculation of the simulations with all voxels assigned a density of water improved this verification accuracy to within 1 mm.

CONCLUSION

Source position verification using the Magic Plate during a HDR prostate brachytherapy treatment was examined using MC simulations. In a homogenous geometry (water), the Magic Plate was able to localize the source to within 1 mm, however, the verification accuracy was negatively affected by inhomogeneities; this can be corrected for by using density information obtained from CT, making the proposed tool attractive for use as a real-time in vivo quality assurance (QA) device in HDR brachytherapy for prostate cancer.

Direction modulated brachytherapy (DMBT) tandem applicator for cervical cancer treatment: Choosing the optimal shielding material

PURPOSE

To investigate the dose modulation capability of a novel MRI-compatible direction modulated brachytherapy (DMBT) tandem applicator design with various high-density shielding materials for brachytherapy treatment of cervical cancer. The shield materials that have been evaluated are tantalum (Ta), pure tungsten (W), gold (Au), rhenium (Re), osmium (Os), platinum (Pt), iridium (Ir), and W' tungsten alloy (95%W, 3.5%Ni, 1.5%Cu).

MATERIALS AND METHODS

The recently proposed six-channel DMBT tandem is composed of nonmagnetic tungsten alloy (W') rod with diameter of 5.4 mm and coated with 0.3-mm thick bio-safe plastic sheath. The tandem shielding material can, however, be individually replaced with various other shields to create directional radiation. Monte Carlo N-Particle (MCNP) code was used to calculate the three-dimensional (3D) dose distributions in a water phantom for an HDR 192 Ir (mHDR-v2) source inside each DMBT tandem with various shields and a plastic conventional tandem (Con.T). Then, the 3D dose distributions were imported into an in-house-coded inverse planning optimization algorithm to obtain optimal plans for 12 clinical cases chosen at random from the international RetroEMBRACE dataset involving conventional tandem and ring (Con.T&R) applicators. All plans generated by the DMBT tandem and ring (DMBT&R) with the tungsten alloy [DMBT(W')&R] were compared with the corresponding Con.T&R plans, to generate benchmark results. These benchmark results were then considered as reference plans for other shields performances. Plans were normalized to receive the same high-risk clinical target volume (CTVHR ) D90 . The D100 , D10 , and V100 for CTVHR , and D2cm3 for organs at risk (OARs) of bladder, sigmoid, and rectum were calculated and compared.

RESULTS

Transmission factor (TF), that is, the dose in the backside of the DMBT shield over that in the front opening, at a 5 cm distance, were 36.6%, 34.8%, 31.9%, 28.9%, 27.9%, 26.2%, 26.2%, and 25.5%, for Ta, W', W, Re, Au, Os, Pt, and Ir shields, respectively. On average, the CTVHR values for D100 , V100 , D10 were not significantly different across all DMBT&R shields and the Con.T&R plans (P > 0.219). For the D2cm3 , the benchmark results showed significant reductions (P < 0.03), that is, on average, -8.3% for bladder, -10.7% for rectum, and -10.1% for sigmoid, compared to the Con.T&R plans. However, the various shields showed little improvement from the tungsten alloy (W'), where on average, rectum (bladder) [sigmoid] D2cm3 were reduced by -1.32% (-0.85%) [-1.01%], -1.25% (-0.78%) [-0.91%], -1.22% (-0.75%) [-0.86%], -0.94% (-0.60%) [-0.70%], -0.84% (-0.51%) [-0.59%], and -0.38% (-0.24%) [-0.23%] for Ir, Pt, Os, Au, Re, and W shields, relative to the benchmark W' DMBT plans, respectively. These corresponding values for Ta increased by +0.28% (+0.08%) [+0.25%], respectively.

CONCLUSION

The Ir, Pt, Os, Au, Re, and W shielding materials, respectively, in descending order, lead to better OAR sparing than the DMBT(W')&R plans. However, the amount of improvement is limited and clinically insignificant. This finding suggests that the initial W' shield remains a suitable choice given the proven MR compatibility, for use in MR-guided adaptive brachytherapy of cervical cancer.

Assessment of two hemispherical and hemispherical-conical miniature sources used in electronic brachytherapy using Monte Carlo Simulation

Introduction

Since the heart of the electronic brachytherapy system is a tube of a miniature x-ray and due to the increasing use of electronic brachytherapy, there is an urgent need for acquiring knowledge about the X-ray spectrum produced, and distribution of x-ray dose. This study aimed to assess the optimal target thickness (TT), the X-ray source spectrum, and the absorbed dose of two miniature sources of hemispherical and hemispherical-conical used in electronic brachytherapy systems, through a Monte Carlo simulation.

Methods

Considering the advantages of MCNPX Code (2.6.0), two input files corresponding to the characteristics of the investigated miniature sources were prepared for this code and then were used for simulation. The optimal thickness (OT) of gold and tungsten targets was determined for the energy levels of 40, 45, and 50 kilo-electron-volts.

Results

In this study, the values of the size of the optimal thickness of 0.92, 1.01 and 1.06 μ for gold target and values of 0.99, 1.08 and 1.34 μ for tungsten target were obtained for energies 40, 45 and 50 keV that using these values, the optimum thickness of 0.92, X-ray spectrum within and outside targets, axial and radial doses for the used energy were calculated for two miniature sources.

Conclusion

It was found that the energy of incident electron, target shape, cross-sectional area of the produced bremsstrahlung, atomic number of materials constituting of the target and output window are the factors with the greatest impacts on the produced X-ray spectrum and the absorbed dose.

Anode optimization for miniature electronic brachytherapy X-ray sources using Monte Carlo and computational fluid dynamic codes

A miniature X-ray source has been optimized for electronic brachytherapy. The cooling fluid for this device is water. Unlike the radionuclide brachytherapy sources, this source is able to operate at variable voltages and currents to match the dose with the tumor depth. First, Monte Carlo (MC) optimization was performed on the tungsten target-buffer thickness layers versus energy such that the minimum X-ray attenuation occurred. Second optimization was done on the selection of the anode shape based on the Monte Carlo in water TG-43U1 anisotropy function. This optimization was carried out to get the dose anisotropy functions closer to unity at any angle from 0° to 170°. Three anode shapes including cylindrical, spherical, and conical were considered. Moreover, by Computational Fluid Dynamic (CFD) code the optimal target-buffer shape and different nozzle shapes for electronic brachytherapy were evaluated. The characterization criteria of the CFD were the minimum temperature on the anode shape, cooling water, and pressure loss from inlet to outlet. The optimal anode was conical in shape with a conical nozzle. Finally, the TG-43U1 parameters of the optimal source were compared with the literature.

Optimum radiation source for radiation therapy of skin cancer

Several different applicators have been designed for treatment of skin cancers, such as scalp, hand, and legs using Ir‐192 HDR brachytherapy sources (IR‐HDRS), miniature electronic brachytherapy sources (eBT), and external electron beam radiation therapy (EEBRT). Although, all of these methodologies may deliver the desired radiation dose to the skin, but the dose to the underlying bone may become the limiting factor for selection of the optimum treatment technique. In this project, dose to the underlying bone has been evaluated as a function of the radiation type, thickness of the bone, and thickness of the soft tissue on top of bone, assuming the same radiation dose delivery to the skin. These evaluations are performed using Monte Carlo (MC) simulation technique with MCNP5 code. The results of these investigations indicate that, for delivery of the same skin dose with a 50 keV eBT, 4 MeV or 6 MeV EEBRT techniques, the average doses received by the underlying bones are 5.31, 2, or 1.75 times the dose received from IR‐HDRS technique, respectively. These investigations indicate that, for the treatment of skin cancer condition with bone immediately beneath skin, the eBT technique may not be the most suitable technique, as it may lead to excessive bone dose relative to IR‐HDRS and 6 MeV or 4 MeV electron beams.

PACS number: 87.53.Jw, 87.55.K‐