Chemical synthesis and optical, structural, and surface characterization of InP-In2O3 quantum dots

Interfacial interactions of doped-Ti3C2 MXene/MAPbI3 heterostructures: surfaces and the theoretical approach

The work function (WF) of perovskite materials is essential for developing optoelectronic devices enabling efficient charge transfer at their interfaces. Perovskite's WF can be tuned by MXenes, a new class of two-dimensional (2D) early transition metal carbides, nitrides, and carbonitrides. Their variable surface terminations or the possibility of introducing elemental dopants could advance perovskites. However, the influence of doped-MXenes on perovskite materials is still not fully understood and elaborated. This study provides mechanistic insight into verifying the tunability of MAPbI3 WF by hybridizing with fluorine-terminated Ti3C2Tx (F-MXene) and nitrogen-doped Ti3C2Tx (N-MXene). We first reveal the interfacial interaction between MAPbI3 and MXenes via X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), and photoluminescence spectroscopy (PL). UPS supported by density functional theory (DFT) calculations allowed the description of the influence of F and N on MXene's WF. Furthermore, we developed MAPbI3/MXene heterostructures using F- and N-MXenes. The F-MXenes extended the most WF of MAPbI3 from 4.50 eV up to 3.00 eV, compared to only a small shift for N-MXene. The underlying mechanism was charge transfer from low WF F-MXene to MAPbI3, as demonstrated by PL quenching in MAPbI3/F-MXene heterostructures. Altogether, this work showcases the potential of fluorine-doped MXenes over nitrogen-doped MXenes in advancing perovskite heterostructures, thus opening a door for efficient optoelectronic devices.

Advanced Strategies to Tailor the Nucleation and Crystal Growth in Hybrid Halide Perovskite Thin Films

Remarkable improvement in the perovskite solar cell efficiency from 3.8% in 2009 to 25.5% today has not been a cakewalk. The credit goes to various device fabrication and designing techniques employed by the researchers worldwide. Even after tremendous research in the field, phenomena such as ion migration, phase segregation, and spectral instability are not clearly understood to date. One of the widely used techniques for the mitigation of ion migration is to reduce the defect density by fabricating the high-quality perovskite thin films. Therefore, understanding and controlling the perovskite crystallization and growth have become inevitably crucial. Some of the latest methods attracting attention are controlling perovskite film morphology by modulating the coating substrate temperature, antisolvent treatment, and solvent engineering. Here, the latest techniques of morphology optimization are discussed, focusing on the process of nucleation and growth. It can be noted that during the process of nucleation, the supersaturation stage can be induced faster by modifying the chemical potential of the system. The tailoring of Gibbs free energy and, hence, the chemical potential using the highly utilized techniques is summarized in this minireview. The thermodynamics of the crystal growth, design, and orientation by changing several parameters is highlighted.

Temperature Effects in the Initial Stages of Heteroepitaxial Film Growth

Kinetic Monte Carlo simulations of a model of thin film heteroepitaxy are performed to investigate the effects of the deposition temperature in the initial growth stages. Broad ranges of the rates of surface processes are used to model materials with several activation energies and several temperature changes, in conditions of larger diffusivity on the substrate in comparison with other film layers. When films with the same coverage are compared, the roughness increases with the deposition temperature in the regimes of island growth, coalescence, and initial formation of the continuous films. Concomitantly, the position of the minimum of the autocorrelation function is displaced to larger sizes. These apparently universal trends are consequences of the formation of wider and taller islands, and are observed with or without Ehrlich-Schwöebel barriers for adatom diffusion at step edges. The roughness increase with temperature qualitatively matches the observations of recent works on the deposition of inorganic and organic materials. In thicker films, simulations with some parameter sets show the decrease of roughness with temperature. In these cases, a re-entrance of roughness may be observed in the initial formation of the continuous films.

Emerging doping strategies in two-dimensional hybrid perovskite semiconductors for cutting edge optoelectronics applications

The past decade has witnessed tremendous progress in metal halide perovskites, particularly in lead (Pb) halide perovskites, because of their extraordinary performance in cutting-edge optoelectronic devices. However, the toxicity of Pb and the environmental stability of the perovskites are two major issues that this field is currently facing. In recent years, 2D layered perovskites have emerged as a promising alternative to the traditional 3D perovskites due to their structural flexibility and higher environmental stability, though they lack the desired level of device efficiency. Doping with target ions can drastically tune the crystal structure, optical properties, charge recombination dynamics, and electronic properties of the 2D perovskite. Although the field of doping in 2D perovskites has seen substantial growth in recent times, no comprehensive review is available on the recent advances in doping of 2D perovskites and its effect on the optoelectronic properties. In this review, we summarize the progress in doping in 2D perovskites based on different doping sites including progress in different synthesis strategies and their impact on crystal structures and various optoelectronic properties. We then highlight the recent achievements in doped 2D perovskites for photovoltaic, LED and other emerging applications. Finally, we conclude with the challenges and the future scope in the doping studies of 2D layered perovskites, which need to be addressed for further developments of next-generation 2D perovskite-based optoelectronic devices.

Improved efficiency and carrier dynamic transportation behavior in perovskite solar cells with CuInS2 quantum dots as hole-transport materials

Inorganic quantum dot (QD)-based hole-transport materials (HTMs) have proved their potential in perovskite solar cells (PSCs). In this work, CuInS2 quantum dots (CIS QDs) were applied as HTMs for PSCs with the architecture of TiO2/Cs0.17FA0.83Pb(Br0.2I0.8)3/HTM/Au. By optimizing the preparation process, a high-quality perovskite thin film could be obtained. When the speed was 5000 rpm, the speed acceleration was 3000 rpm per s and heat treated at 150 °C, the perovskite film had low surface roughness (15.26 nm) and obvious grain boundary. The photoelectric conversion efficiency (PCE) of PSCs was greatly improved from 2.83% to 12.33% utilizing CIS QDs at an optimal concentration and with surface ligands as HTMs. Surface ligands can control the size and shape of CIS QDs, and thus affect the performance of PSCs. The carrier dynamic transportation behaviour at the CIS/perovskite interface was studied, which showed that CIS QDs as HTMs in PSCs can strongly quench the fluorescence and increase the photobleaching recovery rate. Therefore, CIS QDs are promising inorganic HTMs for the fabrication of PSCs.