A novel modification and selective route for the adsorption of Pb2+ by oak charcoal functionalized with glutaraldehyde

Water Treatment Using High Performance Antifouling Ultrafiltration Polyether Sulfone Membranes Incorporated with Activated Carbon

Membrane fouling is a continued critical challenge for ultrafiltration membranes performance. In this work, polyether sulfone (PES) ultrafiltration (UF) membranes were fabricated via phase-inversion method by incorporating varying concentrations of APTMS modified activated carbon (mAC). The mAC was thoroughly characterized and the fabricated membranes were studied for their surface morphology, functional groups, contact angle, water retention, swelling (%) porosity, and water flux. The hydrophilicity of mAC membranes also resulted in lower contact angle and higher values of porosity, roughness, water retention as well as water flux. Also, the membranes incorporated with mAC exhibited antibacterial performance against model test strains of gram-negative Ecoil and gram-positive S. aureus. The antifouling studies based on bovine serum albumin protein (BSA) solution filtration showed that mAC membranes have better BSA flux. The higher flux and antifouling characteristics of the mAC membranes were attributed to the electrostatic repulsion of the BSA protein from the unique functional properties of AC and network structure of APTMS. The novel mAC ultrafiltration membranes developed and studied in present work can provide higher flux and less BSA rejection thus can find antifouling applications for the isolation and concentration of proteins and macromolecules.

Supramolecular Hybrid Material Based on Engineering Porphyrin Hosts for an Efficient Elimination of Lead(II) from Aquatic Medium

Porphyrins show great promise for future purification demands. This is largely due to their unique features as host binding molecules that can be modified at the synthetic level, and largely improved by their incorporation into inorganic based materials. In this study, we assessed the efficacy of a hybrid material obtained from the immobilization of 5,10,15,20-tetrakis(pentafluorophenyl)-porphyrin on silica surface to remove Pb(II), Cu(II), Cd(II), and Zn(II) ions from water. The new organic-inorganic hybrid adsorbent was fully characterized by adequate techniques and the results show that the hybrid exhibits good chemical and thermal stability. From batch assays, it was evaluated how the efficacy of the hybrid was affected by the pH, contact time, initial metal concentration, and temperature. The adsorption kinetic and isotherms showed to fit the recent developed fractal-like pseudo-second-order model and Langmuir–Freundlich model respectively. The highest adsorption capacities for Pb(II), Cu(II), Cd(II), and Zn(II) ions were 187.36, 125.17, 82.45, and 56.23 mg g⁻¹, respectively, at pH 6.0 and 25 °C. This study also shows that metal cations from real river water samples can be efficient removed in the presence of the new adsorbent material.

Modeling of Copper Adsorption on Mesoporous Carbon CMK-3: Response Surface Design

CMK-3 mesoporous carbon was nanocast from SBA-15 silica. The obtained carbon was characterized by nitrogen sorption isotherms, X-ray diffraction and transmission electron microscopy (TEM). The batch adsorption tests were done at constant pH taking into account the initial metal ion concentration, adsorbent mass and temperature. A statistical study using a response surface design method was done to develop a mathematical model to predict copper adsorption on CMK-3 as a function of the mentioned experimental factors. It was found that all these parameters are significant, and copper concentration has the greatest effect on adsorption among them. Moreover, the obtained model proved to be adequate in predicting copper adsorption on CMK-3 and its performance under different experimental conditions.

Synthesis of sodium polyacrylate–bentonite using in situ polymerization for Pb2+ removal from aqueous solutions

A sodium polyacrylate–bentonite material (PAANa–Bent), as an adsorbent for heavy metal ions, is synthesized for the first time using in situ polymerization.