Ag 3 PO 4 /CuO composites utilizing the synergistic effect of photocatalysis and Fenton-like catalysis to dispose organic pollutants

The prospect of CuxO-based catalysts in photocatalysis: From pollutant degradation, CO2 reduction, and H2 production to N2 fixation

The topic of photocatalysis and CuxO-based materials has been intertwined for quite a long time. Its relatively high abundance in the earth's crust makes it an important target for researchers around the globe. One of the properties exploited by researchers is its ability to exist in different oxidation states (Cu0, Cu+, Cu2+, and Cu3+) and its implications on photocatalytic efficiency improvement. Recently, they have been extensively used as photocatalytic materials for dye and pollutant degradation. However, it has almost reached saturation levels, therefore, currently, they are being mostly utilized for CO2 reduction and H2 evolution. Hence, this review will discuss the evolution (in application) of CuxO-based photocatalysts, relating to their past, present, and future. Moreover, photocatalytic efficiency improvement strategies such as doping, heterojunction formation, and carbonaceous construction with other materials will also be touched upon. Finally, the prospect of Cu2O-based photocatalysts will be discussed in the field of photocatalytic N2 fixation to ammonia. The significance of N2 chemisorption on photocatalysts to maximize ammonia production will also be given importance.

p-n heterojunction constructed by γ-Fe2O3 covering CuO with CuFe2O4 interface for visible-light-driven photoelectrochemical water oxidation

Fe₂O₃ is a promising n-type semiconductor as the photoanode of photoelectrochemical water-splitting method due to its abundance, low cost, environment-friendly, and high chemical stability. However, the recombination of photogenerated holes and electrons leads to low solar-to-hydrogen efficiency. In this work, to overcome the recombination issue, a p-type semiconductor, CuO, is introduced underneath the γ-Fe₂O₃ to synthesize γ-Fe₂O₃/CuO on the FTO substrate. Along with the formation of p-n heterojunction, CuFe₂O₄ is in situ generated at the interface of γ-Fe₂O₃ and CuO. The existence of Cu₂O in CuO and CuFe₂O₄ promotes the charge transfer from CuO to γ-Fe₂O₃ and within CuFe₂O₄, respectively, resulting in creating an internal electric field in γ-Fe₂O₃/CuO and leading to the conduction band of CuO bending up and γ-Fe₂O₃ bending down. Additionally, Cu(II) in CuFe₂O₄ contributes to fast electron capture. Consequently, the charge transfer efficiency and charge separation efficiency of photo-generated holes are promoted. Hence, γ-Fe₂O₃/CuO exhibits an enhanced photocurrent density of 13.40 mA cm^-2 (1.9 times higher than γ-Fe₂O₃). The photo corrosion resistance of CuO is dramatically increased with the protection of CuFe₂O₄, resulting in superior high chemical stability, i.e. 85% of the initial activity remains after a long-term test.

Charge Dynamics of a CuO Thin Film on Picosecond to Microsecond Timescales Revealed by Transient Absorption Spectroscopy

Understanding the mechanism of charge dynamics in photocatalysts is the key to design and optimize more efficient materials for renewable energy applications. In this study, the charge dynamics of a CuO thin film are unraveled via transient absorption spectroscopy (TAS) on the picosecond to microsecond timescale for three different excitation energies, i.e., above, near, and below the band gap, to explore the role of incoherent broadband light sources. The shape of the ps-TAS spectra changes with the delay time, while that of the ns-TAS spectra is invariant for all the excitation energies. Regardless of the excitations, three time constants, τ₁ ∼ 0.34-0.59 ps, τ₂ ∼ 162-175 ns, and τ₃ ∼ 2.5-3.3 μs, are resolved, indicating the dominating charge dynamics at very different timescales. Based on these observations, the UV-vis absorption spectrum, and previous findings in the literature, a compelling transition energy diagram is proposed. Two conduction bands and two defect (deep and shallow) states dominate the initial photo-induced electron transitions, and a sub-valence band energy state is involved in the subsequent transient absorption. By solving the rate equations for the pump-induced population dynamics and implementing the assumed Lorentzian absorption spectral shape between two energy states, the TAS spectra are modeled which capture the main spectral and time-dependent features for t > 1 ps. By further considering the contributions from free-electron absorption during very early delay times, the modeled spectra reproduce the experimental spectra very well over the entire time range and under different excitation conditions.

Exploring the photocatalytic inactivation mechanism of Microcystis aeruginosa under visible light using Ag3PO4/g-C3N4

In this work, a series of Ag₃PO₄/g-C₃N₄ (AG) photocatalysts were synthesized. After characterizing the properties, the effects of mass ratio, light intensity, and material dosages on photodegradation were investigated. The material with a 1/2 mass ratio of Ag₃PO₄/g-C₃N₄ showed the highest photocatalytic activity under visible light, and the removal efficiency reached 90.22% for an initial suspended algae concentration of 2.7 × 10⁶ cells/mL, 0.1 g of AG, and 3 h of irradiation. These results showed that the conductivity was increased while the total protein and COD contents of the algae suspension were declined rapidly. In contrast, the variations in the malondialdehyde (MDA) level suggested that the algae cell wall was severely damaged and that selective permeability of the membrane was significantly affected. A possible photocatalytic mechanism was proposed and •O₂^- was shown to be the major reactive oxygen species in the photocatalysis. In summary, during the visible light photocatalytic process, the cell structure was destroyed, which caused the leakage of electrolyte, the inactivation of protein, and the inhibition of photosynthesis; finally, the cells died. This study provides a reference for photodegradation of algae pollution in water bodies.

TiO2–Based Nanofibrous Membranes for Environmental Protection

Electrospinning is a unique technique that can be used to synthesize polymer and metal oxide nanofibers. In materials science, a very active field is represented by research on electrospun nanofibers. Fibrous membranes present fascinating features, such as a large surface area to volume ratio, excellent mechanical behavior, and a large surface area, which have many applications. Numerous techniques are available for the nanofiber’s synthesis, but electrospinning is presented as a simple process that allows one to obtain porous membranes containing smooth non-woven nanofibers. Titanium dioxide (TiO2) is the most widely used catalyst in photocatalytic degradation processes, it has advantages such as good photocatalytic activity, excellent chemical stability, low cost and non-toxicity. Thus, titanium dioxide (TiO2) is used in the synthesis of nanofibrous membranes that benefit experimental research by easy recyclability, excellent photocatalytic activity, high specific surface areas, and exhibiting stable hierarchical nanostructures. This article presents the synthesis of fiber membranes through the processes of electrospinning, coaxial electrospinning, electrospinning and electrospraying or electrospinning and precipitation. In addition to the synthesis of membranes, the recent progress of researchers emphasizing the efficiency of nanofiber photocatalytic membranes in removing pollutants from wastewater is also presented.

Broccoli-liked silver phosphate nanoparticles supported on green nanofiber membrane for visible-light driven photodegradation towards water pollutants

In view of the practical application, it is imperative to develop efficient, exercisable, and visible light driven water pollution treatment materials. Herein, a high-efficiency green photocatalytic membrane for water pollution treatment is proposed and fabricated conveniently. Firstly, silver phosphate (Ag₃PO₄) nanoparticles with controlled morphology were prepared by simple liquid-phase precipitation method, and then a hierarchical structured Ag₃PO₄@polylactic acid (PLA) composite nanofiber membrane was prepared by electrospinning. Using electrospun PLA nanofiber membrane as a carrier of photocatalysts can significantly improve the dispersion of Ag₃PO₄nanoparticles, and increase the contact probability with pollutants and photocatalytic activity. The prepared PLA@Ag₃PO₄composite membrane was used to degrade methylene blue (MB) and tetracycline hydrochloride (TC) under visible light irradiation. The results showed that the removal ratio of pollutants on Ag₃PO₄@PLA composite nanofiber membrane was 94.0% for MB and 82.0% for TC, demonstrating an outstanding photocatalytic activity of composite membrane. Moreover, the PLA nanofiber membrane is a self-supported and biodegradable matrix. After five cycles, it can still achieve 88.0% of the initial photocatalytic degradation rate towards MB, showing excellent recyclability. Thus, this composite nanofiber membrane is a high-efficiency and environmental-friendly visible light driven water pollution treatment material that could be used in real applications.

Uncertainty and misinterpretation over identification, quantification and transformation of reactive species generated in catalytic oxidation processes: A review

The identification of reactive radical species using quenching and electron paramagnetic resonance (EPR) tests has attracted extensive attention, but some mistakes or misinterpretations are often present in recent literature. This review aims to clarify the corresponding issues through surveying literature, including the uncertainty about the identity of radicals in the bulk solution or adsorbed on the catalyst surface in quenching tests, selection of proper scavengers, data explanation for incomplete inhibition, the inconsistent results between quenching and EPR tests (e.g., SO₄^•- is predominant in quenching test while the signal of ^•OH predominates in EPR test), and the incorrect identification of EPR signals (e.g., SO₄^•- is identified by indiscernible or incorrect signals). In addition, this review outlines the transformation of radicals for better tracing the origin of radicals. It is anticipated that this review can help in avoiding mistakes while investigating catalytic oxidative mechanism with quenching and EPR tests.

Ag3PO4/NiO Composites with Enhanced Photocatalytic Activity under Visible Light

Black NiO powders were prepared by a hydrothermal method. Moreover, the visible light-driven Ag3PO4/NiO photocatalyst composites were successfully synthesized by in situ precipitation method. These samples were structurally characterized by X-ray diffraction and Rietveld refinement. The strong interaction between the phases and the defects in the samples was affected by the formation of the composites, as identified by Fourier transform infrared spectroscopy and Raman spectroscopy. UV-vis diffuse reflectance spectroscopy exhibited enhanced light absorption for all Ag3PO4/NiO composites, suggesting the effective interaction between the phases. Moreover, field-emission scanning electron microscopy images revealed the presence of NiO microflowers composed of nanoflakes in contact with Ag3PO4 microparticles. The composite with 5% NiO presented enhanced photocatalytic efficiency in comparison with pure Ag3PO4, degrading 96% of rhodamine B (RhB) dye in just 15 min under visible light; however, the recycling experiments confirmed that the composite with 75% NiO showed superior stability. The recombination of the electron-hole pairs was considered for the measurement of the photoluminescence of the samples. These measurements were performed to evaluate the possible causes for the difference in the photocatalytic responses of the composites. From these experimental results, possible photocatalytic mechanisms for RhB degradation over Ag3PO4/NiO composites under visible-light irradiation were proposed.

An insight on the role of PVP in the synthesis of monoclinic WO3 with efficiently photocatalytic activity

Nanoparticles of monoclinic WO₃ were synthesized by a facile method using Na₂WO₄ as raw material and PVP 70 000 (polyvinylpyrrolidone) as surfactant and template. The effect of PVP on the structure and photocatalytic activity of the synthesized WO₃ was discussed in detail. The prepared samples were characterized by XRD, SEM, FT-IR, UV-vis, XPS, PL techniques, and the results show that the visible light is strongly absorbed by the obtained samples, whose particle size varies from 38 to 85 nm. The photocatalytic properties of the resulted samples were evaluated using RhB in water as a target substance, and results illustrate that 30 mg l^-1 of RhB can be efficiently photodegraded by nano WO₃ under visible light irradiation. Based on the results of XPS, PL and photocalysis experiments, the reason of such improved photocatalytic efficiency may be attributed to the reducing activity of PVP, which leads to the formation of oxygen vacancies beneficial for the capture of photoelectrons and the generation of superoxide radicals. Furthermore, the results show that the photocatalytic efficiency is greatly influenced by the morphology of the synthesized WO₃ samples, and the WO₃ with a block-shaped morphology is an ideal photocatalyst for the degradation of RhB under visible light irradiation.

Synthesis and enhanced photocatalytic performance of 0D/2D CuO/tourmaline composite photocatalysts

Photocatalysis is considered to be a green and promising technology for transforming organic contaminants into nontoxic products. In this work, a CuO/tourmaline composite with zero-dimensional/two-dimensional (0D/2D) CuO architecture was successfully obtained via a facile hydrothermal process, and its photocatalytic activity was evaluated by the degradation of methylene blue (MB). Surface element valence state and molecular vibration characterization revealed that CuO chemically interacted with tourmaline via Si-O-Cu bonds. The specific surface area of the CuO/tourmaline composite (23.60 m² g^-1) was larger than that of the pristine CuO sample (3.41 m² g^-1). The CuO/tourmaline composite exhibited excellent photocatalytic activity for the degradation of MB, which was ascribed to the increase in the quantity of the adsorption-photoreactive sites and the efficient utilization of the photoinduced charge carriers. This study provides a facile strategy for the construction of 0D/2D CuO structures and the design of tourmaline-based functional composite photocatalysts for the treatment of organic contaminants in water.

Photocatalytic Performance and Mechanistic Research of ZnO/g-C3N4 on Degradation of Methyl Orange

Highly dispersed ZnO/g-C₃N₄ composites with different doping ratios of g-C₃N₄ were prepared by a hydrothermal method. The preparation method is simple and the energy consumption is low. The composite samples were used to degradate the methyl orange solution. They all showed excellent photocatalytic activity and cycling stability. The optimal loading content of g-C₃N₄ was investigated, and the mechanism of enhanced photocatalytic activity was studied in detail. This study provides a promising photocatalytic material for the removal of organic pollutants.

A facile one-pot preparation of Bi2O2CO3/g-C3N4 composites with enhanced photocatalytic activity

Bi₂O₂CO₃ modified graphitic carbon nitride (g-C₃N₄) nanosheets were prepared by a simple one-pot synthetic strategy. In the presence of ammonium nitrate, different mass ratios of bismuth nitrate/melamine were used to fabricate these catalysts, which were characterized by X-ray diffraction (XRD), N₂-physisorption, Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV-vis analysis, and photoluminescence (PL). The catalytic properties of composites were evaluated by photodegrading tetracycline hydrochloride (TC) under visible light irradiation. Among these catalysts, Bi₂O₂CO₃(1.5)/g-C₃N₄ showed the highest catalytic activity, which was more than 16 times greater than the pristine g-C₃N₄ material. The improved photocatalytic properties of Bi₂O₂CO₃/g-C₃N₄ may be due to the formation of a heterojunction between Bi₂O₂CO₃ and g-C₃N₄, leading to the effective separation of photo-induced carriers and the enhanced absorption of visible light. Furthermore, the Bi₂O₂CO₃/g-C₃N₄ composites had considerable catalytic stability, which was a key element for their potential applications.

In-situ growth of lepidocrocite on Bi2O3 rod: A perfect cycle coupling photocatalysis and heterogeneous fenton-like process by potential-level matching with advanced oxidation

γ-FeOOH was grown in situ on the surface of rod Bi₂O₃ to construct a perfect cycle coupling photocatalysis and heterogeneous Fenton-like process. The degradation efficiency of this system was detected under the irradiation of visible light. γ-FeOOH/Bi₂O₃ showed better degradation efficiency than pure Bi₂O₃ and γ-FeOOH, and the amount of TOC was decreased to 4.3, suggesting that the system exhibits outstanding oxidation ability that MO and phenol could be degraded to CO₂ and H₂O totally. PL spectra, trapping experiments and ESR test were also carried out to confirm the mechanism of photocatalysis with heterogeneous Fenton-like process, and the suitable conduction band (CB) of Bi₂O₃ matches the electric potential of iron ions was proved to be the key to keep the perfect cycle. Then optimal concentration of H₂O₂, the effect of pH and the stability of the photocatalyst were also investigated.

Fabrication of Ag3PO4/GO/NiFe2O4 composites with highly efficient and stable visible-light-driven photocatalytic degradation of rhodamine B

Effective visible-light-driven Ag3PO4/GO/NiFe2O4 Z-scheme magnetic composites were successfully fabricated by a simple ion-exchange deposition method. The Ag3PO4/GO/NiFe2O4 (8%) composite exhibited excellent photocatalytic activity (degradation efficiency was ∼96% within 15 min and kinetic constant reached 0.1956 min-1) and stability when compared to Ag3PO4, NiFe2O4, and Ag3PO4/NiFe2O4 for rhodamine B (RhB) degradation. Furthermore, by electrochemical and fluorescence measurements, the Ag3PO4/GO/NiFe2O4 (8%) material also showed larger transient photocurrent, lower impedance, and longer fluorescence lifetime (7.82 ns). Comparing the activity result dependence with characterization results, it was indicated that photocatalytic activity depended on fast charge transfer from Ag3PO4 to NiFe2O4 through GO sheet. The h+ and ·O2 - species played important roles in RhB degradation under visible-light. A possible Z-scheme mechanism is proposed over the Ag3PO4/GO/NiFe2O4 (8%) composite. This study might provide a promising visible light responsive photocatalyst for the photocatalytic degradation of organic dyes in wastewater.

Highly efficient visible-light-driven photocatalytic degradation of rhodamine B by a novel Z-scheme Ag3PO4/MIL-101/NiFe2O4 composite

An Ag₃PO₄/MIL-101/NiFe₂O₄ composite was fabricated by an in situ precipitation method. The results implied that introduction of the MOF enhanced the rapid transfer of electrons from Ag₃PO₄ to NiFe₂O₄.