Study on decolorization of Rhodamine B by raw coal fly ash catalyzed Fenton-like process under microwave irradiation

Augmented degradation of dyed organic pollutant using Fe2O3 supported on char formed from poultry slaughterhouse waste

In this work, a novel support for an iron-based catalyst was prepared and employed for Ponceau 4R degradation by photo-Fenton reaction. To this, poultry waste was used for producing char, which was subsequently used to prepare the Fe2O3/Char composite. Process parameters, including catalyst dosage, pH, and hydrogen peroxide concentration, were investigated. The characterization analysis indicated that the textural properties of the composite were improved after impregnation with Fe2O3. The composite exhibited excellent catalytic activity, achieving a decolorization efficiency of 97% at 45 min and 81.06% organic carbon removal at 300 min. In addition, the material showed acceptable performance after four consecutive cycles. Furthermore, a scavenger test was performed to investigate the major reactive species involved in the Ponceau 4R oxidation, and a plausible mechanism for the respective reaction was projected. Therefore, the results of this research demonstrate that this material can be used as a potential catalyst for the abatement of dyed molecules from wastewater.

Highly efficient LaMO3 (M = Co, Fe) perovskites catalyzed Fenton's reaction for degradation of direct blue 86

Perovskite-structured catalysts LaMO₃ (M = Co, Fe) were successfully synthesized and attempted to catalyze hydrogen peroxide (H₂O₂) for the degradation of Direct Blue 86 (DB86), a carcinogenic phthalocyanine dye. The heterogeneous Fenton-like reaction revealed that the oxidative power of the LaCoO₃-catalyzed H₂O₂ (LaCoO₃/H₂O₂) process was higher than that of LaFeO₃/H₂O₂. When LaCoO₃ was calcined at 750 °C for 5 h, 100 mg/L of DB86 could be completely degraded within 5 min via LaCoO₃/H₂O₂ system under H₂O₂ 0.0979 mol/L, initial pH 3.0, LaCoO₃ 0.4 g/L, and 25 °C. The oxidative LaCoO₃/H₂O₂ system has a low activation energy (14.68 kJ/mol) for DB86 degradation, indicating that it is a fast reaction process with highly favorable at high reaction temperatures. For the first time, a cyclic reaction mechanism of catalytic LaCoO₃/H₂O₂ system was proposed based on the evidence of coexisting Co^II and Co^III on the LaCoO₃ surface and the presence of HO^• radicals (major), O₂^•- radicals (minor), and ¹O₂ (minor). LaCoO₃ perovskite catalyst was reusable and still maintained reactive with a satisfactory degradation efficiency within 5 min even after five consecutive uses. This study shows that the as-prepared LaCoO₃ is a highly efficient catalyst for phthalocyanine dye degradation.

Adsorptive removal of Ag/Au quantum dots onto covalent organic frameworks@magnetic zeolite@arabic gum hydrogel and their catalytic microwave-Fenton oxidative degradation of Rifampicin antibiotic

Recent progress in nanotechnology via incorporation of small particle size as quantum dots (QDs) (1-10 nm) in many industrial activities and commercial products has led to significant undesired environmental impacts. Therefore, QDs removal from wastewater represents an interesting research topic with a lot of challenges for scientists and engineers nowadays. In this work, the coagulative removal of metal quantum dots as silver and gold from industrial water samples is explored. A novel biosorbent was assembled via binding of covalent organic frameworks (COFs) with magnetic zeolite and Arabic gum hydrogel (COFs@MagZ@AGH) as a promising removal material for Ag-QDs and Au-QDs. This was fully characterized by EDX, SEM, TEM, FT-IR, XPS, XRD and surface area and applied in coagulative removal of Au-QDs and Ag-QDs in presence of several experimental factors as pH, presence of other electrolytes, stirring time, initial QDs concentration, coagulant dosage, and temperature in order to optimize the removal processes. At optimum conditions, COFs@MagZ@AGH was able to recover 99.19% and 87.57% of Ag-QDs and Au-QDs QDs, respectively via chemical adsorption mechanism with perfect fitting to pseudo-second order model. Reuse of the recovered Ag/Au-QDs@COFs@MagZ@AGH as efficient catalysts in catalytic degradation of Rifampicin antibiotic (Rf) from water was additionally investigated and optimized via microwave-Fenton catalysts with excellent oxidative degradation efficiency (100%). Reusability and applicability of the biosorbent (COFs@MagZ@AGH) and catalysts (Ag/Au-QDs@COFs@MagZ@AGH) in real industrial water samples were also explored and successfully accomplished.

Degradation of Rhodamine B in Wastewater by Iron-Loaded Attapulgite Particle Heterogeneous Fenton Catalyst

The water pollution caused by industry emissions makes effluent treatment a serious matter that needs to be settled. Heterogeneous Fenton oxidation has been recognized as an effective means to degrade pollutants in water. Attapulgite can be used as a catalyst carrier because of its distinctive spatial crystal structure and surface ion exchange. In this study, iron ions were transported on attapulgite particles to generate an iron-supporting attapulgite particles catalyst. BET, EDS, SEM and XRD characterized the catalysts. The particle was used as a heterogeneous catalyst to degrade rhodamine B (RhB) dye in wastewater. The effects of H2O2 concentration, initial pH value, catalyst dosage and temperature on the degradation of dyes were studied. The results showed that the decolorization efficiency was consistently maintained after consecutive use of a granular catalyst five times, and the removal rate was more than 98%. The degradation and mineralization effect of cationic dyes by granular catalyst was better than that of anionic dyes. Hydroxyl radicals play a dominant role in RhB catalytic degradation. The dynamic change and mechanism of granular catalysts in catalytic degradation of RhB were analyzed. In this study, the application range of attapulgite was widened. The prepared granular catalyst was cheap, stable and efficient, and could be used to treat refractory organic wastewater.

Roles of hydroxyl and carbonate radicals in bisphenol a degradation via a nanoscale zero-valent iron/percarbonate system: influencing factors and mechanisms

In this work, nanoscale-zero-valent iron (nZVI) was applied to activate sodium percarbonate (SPC) to eliminate bisphenol A (BPA), which poses a risk to ecological and human health as a typical endocrine disruptor. The influence of nZVI loading, SPC dosing, initial pH, and the presence of inorganic anions (including Cl-, HPO4 2-, NO3 - and NO2 -) and humic acid on BPA removal by the nZVI/SPC system were investigated. Based on the scavenger test results, ˙OH and CO3˙- participated in the degradation of BPA, and ˙OH was illustrated to be the dominant radical. The X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analysis suggested that surface iron oxide generation, electron transfer and Fe2+ release were the main processes of the SPC activation by nZVI. Moreover, BPA transformation products were detected by LC-MS allowing the proposal of a possible degradation pathway of BPA. Along with the degradation of the parent compound BPA, the total organic carbon (TOC) gradually decreased, while the bio-toxicity increased at the initial stage of the reaction (0-3 min) and then decreased to a lower level rapidly at 20 min. Overall, this study evidenced the feasibility of the nZVI/SPC system to efficiently degrade BPA, broadening the applications of nZVI in wastewater treatment.

Kinetic and thermodynamic studies of fenton oxidative decolorization of methylene blue

The need for light intensity has made dye degradation very costly for industry. In this work, Fenton reagent was used for the efficient degradation of an aqueous solution of dye without the need for a light source. The influences of the pH of the media, the initial concentrations of Fe²⁺, H₂O₂, and methylene blue (MB) dye; in addition to temperature on the oxidation of MB dye were studied. The optimum amounts of the Fenton reagent were 4mM of Fe²⁺ and 70mM of H₂O₂ at 20 mg/L of dye. The optimum ratio of 0.05 of Fe²⁺/H₂O₂ was found to give the best result for the decolorization of dye. The Fenton process was effective at pH 3 with a maximum dye decolorization efficiency of 98.8% within 30 min of reaction, corresponding to a COD removal of 85%. The decolorization process was thermodynamically feasible, spontaneous, and endothermic. The activation energy (E_a) was 33.6 kJ/mol suggesting that the degradation reaction proceeded with a low energy barrier.

The improved treatment of liquid crystals into non-hazardous molecules using a microwave-assisted hydrothermal method

Liquid crystal (LC), as a crucial component of liquid crystal display (LCD), improperly treatment of which will possibly impair ecosystems and human health. In view of the advantages of hydrothermal reaction and microwave irradiation, this paper intensively studied the process of microwave-assisted hydrothermal (MWAH) decomposition of LC wastes. The experimental materials include a kind of refractory fluorinated liquid crystal commonly used in thin-film transistor LCD, and its mixture with the other two typical liquid crystal monomers in the waste low-end display panels. Under the MWAH process, the optimized condition for thorough decomposition of 0.67 g.L^-1 fluorinated liquid crystal is 0.653 mol.L^-1 H₂O₂, 1 g.L^-1 AC, 300 mL water, 250 °C and 7 min. The superiority of microwave in enhancing hydrothermal treatment efficiency was verified by the first-order kinetic reaction equation fitted for the decomposition process under optimal condition, along with two possible decomposition pathways tentatively proposed after characterizing the intermediate products. Under the same condition, 1 g.L^-1 mixture of fluorinated liquid crystal and the other two liquid crystal monomers were entirely decomposed with no harmful byproduct detected, suggesting that microwave irradiation could effectively promote the hydrothermal decomposition of liquid crystal wastes.

The Advances in the Special Microwave Effects of the Heterogeneous Catalytic Reactions

In the present, microwave field has been widely used in chemical processes as an important means of intensification. The heterogeneous catalysts coupling with microwave has been shown to have many advantages, such as high catalytic performance and stability. Our objective is to focus an up-to-date overview concerning the advances in the special microwave effects of the heterogeneous catalytic reactions including special thermal effect, microwave plasma, enhanced active groups, and the flexibility of structure. This review systematically states the action mechanism and some practical application of microwave-induced catalytic process. Finally, the potential research directions in the field of microwave-induced catalysis are prospected.