Preparation, characterization, and photocatalytic activity of novel AgBr/ZIF-8 composites for water purification

Surfactant-Free, Size-Controllable, and Scalable Green Synthesis of ZIF-8 Particles with Narrow Size Distribution by Tuning Key Reaction Parameters in Water Solvent

The chemical/physical properties and reliable performance of nanoporous materials are strongly influenced by the particle size and corresponding distribution. Among many types of MOFs, ZIF-8, is still widely used and many studies have been conducted to control the particle size and uniformity of ZIF-8 using surfactants and organic solvents. However, the use of surfactants and organic solvents process is expensive and may cause environmental pollution. For the first time, in this paper, a surfactant-free, size-controllable, and scalable green synthesis method of ZIF-8 particles is reported using four reaction parameters (temperature, concentration, pouring time, and reactant ratio) that affect the formation of nuclei and growth of ZIF-8 crystals. The as-synthesized ZIF-8 nanoparticles show great uniformity and controllable particle sizes in the wide range of 147-915 nm. In addition, a 2 L large-scale synthesis of ZIF-8 with narrow size distribution is developed by finely tuned particle size in water without any additives. To demonstrate the efficient utilization of nanopores according to the particle size and size distribution, an adsorption test is conducted on the ZIF-8 nanoparticles. This study will support the synthesis of size-controlled ZIF-8 with narrow size distribution and their composites for achieving high performance in the emerging applications.

Fabrication and characterization of a Bi2O3-modified chitosan@ZIF-8 nanocomposite for enhanced drug loading-releasing efficacy

In this study, a simple novel hybrid mesoporous nanomaterial derived from a metal-organic framework (ZIF-8) and chitosan, which were coated on green bismuth oxide, has been successfully synthesized, characterized, and applied to investigate its dapsone loading-releasing capability in the aqueous media. This suggested nanocomposite showed promise for drug loading from water b using hydrogen bonds, pi-pi, and electrostatic interactions. Structural and morphological analyses were performed on the proposed green synthesized nanocomposite through scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, Brunauer-Emmett-Teller analysis, and thermogravimetric analysis. Various influencing parameters, including pH, nanocomposite dose, and contact time, were investigated to optimize the dapsone loading process. Utilizing the non-linear optimization methodology, the results show that dapsone-loading efficiency was >85 % for 50 mg.L-1 of dapsone drug. The optimum parameters for achieving maximal loading of dapsone drug were pH = 6.8, hybrid mesosphere dose = 2.6 mg.mL-1, and time = 53 min. Based on the release investigations, the dapsone-loaded nanocomposite was put into phosphate buffer saline, at pH = 7.4 and T = 37 °C, with a maximum efficiency of 93.9 after 24 h.

Synthesis of Metal-Organic Framework-Based ZIF-8@ZIF-67 Nanocomposites for Antibiotic Decomposition and Antibacterial Activities

Toxic antibiotic effluents and antibiotic-resistant bacteria constitute a threat to global health. So, scientists are investigating high-performance materials for antibiotic decomposition and antibacterial activities. In this novel research work, we have successfully designed ZIF-8@ZIF-67 nanocomposites via sol-gel and solvothermal approaches. The ZIF-8@ZIF-67 nanocomposite is characterized by various techniques that exhibit superior surface area enhancement, charge separation, and high light absorption performance. Yet, ZIF-8 has high adsorption rates and active sites, while ZIF-67 has larger pore volume and efficient adsorption and reaction capabilities, demonstrating that the ZIF-8@ZIF-67 nanocomposite outperforms pristine ZIF-8 and ZIF-67. Compared with pristine ZIF-8 and ZIF-67, the most active 6ZIF-67@ZIF-8 nanocomposite showed higher decomposition efficacy for ciprofloxacin (65%), levofloxacin (54%), and ofloxacin (48%). Scavenger experiments confirmed that •OH, •O2-, and h+ are the most active species for the decomposition of ciprofloxacin (CIP), levofloxacin (LF), and ofloxacin (OFX), respectively. In addition, the 6ZIF-67/ZIF-8 nanocomposite suggested its potential applications in Escherichia coli for growth inhibition zone, antibacterial activity, and decreased viability. Moreover, the stability test and decomposition pathway of CIP, LF, and OFX were also proposed. Finally, our study aims to enhance the efficiency and stability of ZIF-8@ZIF-67 nanocomposite and potentially enable its applications in antibiotic decomposition, antibacterial activities, and environmental remediation.

Enhancing electrochemical properties of a two-dimensional zeolitic imidazole framework by incorporating a conductive polymer for dopamine detection

The zeolitic imidazole framework with a leaf-shaped morphology (ZIF-L) has a wide range of promising applications in gas storage, battery materials, catalytic reactions, and optoelectronic devices due to its planar leaf-like structure and large surface area. However, the low conductivity, weak catalytic activity, and poor stability in the water dielectric medium of ZIF-L limit its further practical application. To solve these problems, we added the conductive polymer heterocyclic poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) to ZIF-L for the sensitive detection of dopamine (DA). The synthesized composite ZIF-L/PEDOT:PSS (ZIF-L/PEDOT) not only retained the surface morphology of ZIF-L but also exhibited excellent electrochemical properties. The higher electrical conductivity of ZIF-L/PEDOT than that of ZIF-L was due to the enhanced electron transfer at the interface between ZIF-L and PEDOT:PSS. As a result, we developed an electrochemical biosensor based on the ZIF-L/PEDOT composite, which has a limit of detection of 7 nM for DA and a wide linear range from 25 nM to 500 μM. Furthermore, the current drop was negligible after 28 days, proving that the biosensor has excellent stability. Based on the above-mentioned outstanding performance, the ZIF-L/PEDOT-based biosensor was successfully used to detect DA in human serum samples. These results demonstrated that ZIF-L/PEDOT is expected to play an essential role in disease detection.

Bismuth-doped g-C3N4/ZIF-8 heterojunction photocatalysts with enhanced photocatalytic performance under visible light illumination

In this work, g-C₃N₄/ZIF-8 heterojunction photocatalysts were synthesised by the process by which the metal-organic framework ZIF-8 nanoparticles were grown onto the g-C₃N₄ layer in situ. Bismuth element was doped into the as-prepared g-C₃N₄/ZIF-8 material and a new type of Bi@g-C₃N₄/ZIF-8 composite photocatalysts was manufactured, in which the doping element acts in adjusting the bandgap in the photocatalysts. The prepared photocatalysts were characterised by XRD, FESEM, TEM, FTIR, XPS, UV-VIS DRS, photoluminescence and photo-electrochemical experiments. The results show that the ZIF-8 nanoparticles grown in situ were well-formed onto the g-C₃N₄ layer, and bismuth was evenly doped into the gaps of the g-C₃N₄/ZIF-8 framework. The degradation rate of methylene blue by CNZ-1.5(Bi)-12, which was a photocatalyst composed of 12% Bi-doped with g-C₃N₄/ZIF-8 material (the mass ratio of g-C₃N₄: ZIF-8 = 1:1.5), reached 86.6% under visible light irradiation within 60 min. The free radical scavenging experiment and electron spin resonance spectroscopy showed that ∙OH was the main active substance. Bismuth doping into the photocatalytic system promotes the excitation of electrons from the valence band to the conduction band and provides a good channel for the transmission of photogenerated carriers as well. It is achieved that intensive visible light absorption, the enhanced separation efficiency of photogenerated carriers, and excellent thermal stability and high recyclability in the novel composite photocatalyst, owing to the synergistic effect of the introduced bismuth with the heterostructure of g-C₃N₄/ZIF-8. Therefore, the synthesised Bi@g-C₃N₄/ZIF-8 heterojunction photocatalysts may be used as a good photocatalyst for purifying and degrading organic matter in sewage.

The application of a new recyclable photocatalyst γ-Fe2O3@SiO2@ZIF8-Ag in the photocatalytic degradation of amoxicillin in aqueous solutions

This pilot study synthesized the γ-Fe₂O₃@SiO₂@ZIF8-Ag nanocomposites via the hydrothermal method to study its potential use in amoxicillin degradation as a novel photocatalyst in aqueous solutions under visible light radiation. Various diagnostic methods were used to determine the morphology and functional structure of the photocatalyst, and the results confirmed its proper formation. Complete degradation of AMX was obtained at a pH of 5, catalyst dosage of 0.4 g/L, AMX concentration of 10 mg/L, and reaction time of 60 min. The efficiency of the degradation was diminished when anions were present in the reaction medium, and the order of their effect was SO₄^2- < Cl^- < NO₃^- < HCO₃^-. Biodegradability (BOD₅/COD ratio) increased from 0.20 to 0.68 after 120 min of photocatalytic treatment, with a COD removal of 87.54% and a TOC removal of 74.88%. Through the experimental trapping of electrons, we found the production of reactive species, such as hydroxyl radical (•OH), superoxide (O₂^•-), and holes (h⁺), in the photocatalysis reactor and that •OH was the predominant species in AMX photodegradation. Comparative experiments emphasized that the oxidation process occurs with the adsorption of pollutants on the surface of the catalyst, and the photocatalyst has the potential to be activated by various light sources, including visible light, UV light, and sunlight, with an AMX decomposition above 88%. The synthesized particles can be recovered after five consecutive cycles with minimal reduction in the degradation rate (< 4%). γ-Fe₂O₃@SiO₂@ZIF8-Ag can be considered a promising photocatalyst for use in AMX degradation due to its recyclability, easier activation by different light sources, and excellent mineralization.

ZIF-8 metal organic framework materials as a superb platform for the removal and photocatalytic degradation of organic pollutants: a review

Metal organic frameworks (MOFs) are attracting significant attention for applications including adsorption, chemical sensing, gas separation, photocatalysis, electrocatalysis and catalysis. In particular, zeolitic imidazolate framework 8 (ZIF-8), which is composed of zinc ions and imidazolate ligands, have been applied in different areas of catalysis due to its outstanding structural and textural properties. It possesses a highly porous structure and chemical and thermal stability under varying reaction conditions. When used alone in the reaction medium, the ZIF-8 particles tend to agglomerate, which inhibits their removal efficiency and selectivity. This results in their mediocre reusability and separation from aqueous conditions. Thus, to overcome these drawbacks, several well-designed ZIF-8 structures have emerged by forming composites and heterostructures and doping. This review focuses on the recent advances on the use of ZIF-8 structures (doping, composites, heterostructures, etc.) in the removal and photodegradation of persistent organic pollutants. We focus on the adsorption and photocatalysis of three main organic pollutants (methylene blue, rhodamine B, and malachite green). Finally, the key challenges, prospects and future directions are outlined to give insights into game-changing breakthroughs in this area.

Halides and oxyhalides-based photocatalysts for abatement of organic water contaminants - An overview

Recently, halides (silver halides, AgX; perosvkite halides, ABX₃) and oxyhalides (bismuth oxyhalides, BiOX) based nanomaterials are noticeable photocatalysts in the degradation of organic water pollutants. Therefore, we review the recent reports to explore improvement strategies adopted in AgX, ABX₃ and BiOX (X = Cl, Br and I)-based photocatalysts in water pollution remediation. Herein, the photocatalytic degradation performances of each type of these photocatalysts were discussed. Strategies such as tailoring the morphology, crystallographic facet exposure, surface area, band structure, and creation of surface defects to improve photocatalytic activities of pure halides and BiOCl photocatalysts are emphasized. Other strategies like metal ion and/or non-metal doping and construction of composites, adopted in these photocatalysts were also reviewed. Furthermore, the way of production of active radicals by these photocatalysts under ultraviolet/visible light source is highlighted. The deciding factors such as structure of pollutant, light sources and other parameters on the photocatalytic performances of these materials were also explored. Based on this literature survey, the need of further research on AgX, ABX₃ and BiOX-based photocatalysts were suggested. This review might be beneficial for researchers who are working in halides and oxyhalides-based photocatalysis for water treatment.

In Situ Growth of Zeolitic Imidazolate Framework-L in Macroporous PVA/CMC/PEG Composite Hydrogels with Synergistic Antibacterial and Rapid Hemostatic Functions for Wound Dressing

Although many advances have been made in medicine, traumatic bleeding and wound infection are two of the most serious threats to human health. To achieve rapid hemostasis and prevent infection by pathogenic microbes, the development of new hemostatic and antibacterial materials has recently gained significant attention. In this paper, safe, non-toxic, and biocompatible polyvinyl alcohol (PVA); carboxymethyl cellulose (CMC), which contains several carboxyl and hydroxyl groups; and polyethylene glycol (PEG), which functions as a pore-forming agent, were used to prepare a novel PVA/CMC/PEG-based composite hydrogel with a macroporous structure by the freeze-thaw method and the phase separation technique. In addition, a PVA/CMC/PEG@ZIF-L composite hydrogel was prepared by the in situ growth of zeolitic imidazolate framework-L (ZIF-L). ZIF-L grown in situ on hydrogels released Zn²⁺ and imidazolyl groups. They elicited a synergistic antibacterial effect in hemostasis with PVA and CMC, rendering the PVA/CMC/PEG@ZIF-L hydrogel with a good antibacterial effect against Staphylococcus aureus. At the same time, the macroporous structure enabled the rapid release of Zn²⁺ and imidazolyl groups in ZIF-L and promoted cell proliferation at an early stage, enhancing the coagulation efficiency. A rat liver injury model was used to confirm its rapid hemostasis capacity.

Facile and Green Synthesis of Starfruit-Like ZIF-L, and Its Optimization Study

Due to its excellent characteristics, zeolitic imidazole framework-L (ZIF-L) is widely used in various applications, such as drug delivery, wastewater treatments and energy storage. In the synthesis of ZIF-L, the molar ratio of ligand to metal, the reaction time and the temperature are essential parameters to produce excellent ZIF-L. In this work, ZIF-L was synthesized using a facile and green synthesis method. It was statistically investigated and optimized to obtain the best operating conditions. The optimization was carried out toward the amount of adsorbed crystal violet (CV) dye (q) as the response in the statistics. The optimal ZIF-L was obtained using a molar ratio of ligand to metal of 8.2220 for 97 min at 29 °C, where the q value of the CV adsorption onto this optimal ZIF-L reached 823.02 mg/g. The obtained ZIF-L was characterized using SEM, XRD, FTIR and TGA analyses to ensure its excellent characteristics.