Novel application of g-C3N4/NaNbO3 composite for photocatalytic selective oxidation of biomass-derived HMF to FFCA under visible light irradiation

Selective electrooxidation of 5-hydroxymethylfurfural to 5-formyl-furan-2-formic acid on non-metallic polyaniline catalysts: structure-function relationships

The biomass-derived HMF oxidation reaction (HMFOR) holds great promise for sustainable production of fine chemicals. However, selective electrooxidation of HMF to high value-added intermediate product 5-formyl-furan-2-formic acid (FFCA) is still challenging. Herein, we report the electrocatalytic HMFOR to selectively produce FFCA using carbon paper (CP) supported polyaniline (PANI) as a catalyst. The PANI/CP non-metallic hybrid catalyst with moderate oxidation capacity exhibitsoptimized FFCA selectivity up to 76% in alkaline media, which has reached the best performance in reported literature studies. Identification and quantification of active sites for the HMFOR are further realized via linking the activity to structural compositions of PANI; both polaronic-type nitrogen (N3) and positively charged nitrogen (N4) species are proved responsible for adsorption and activation of HMF, and the intrinsic activity of N4 is higher than that of N3. The present work provides new physical-chemical insights into the mechanism of the HMFOR on non-metallic catalysts, paving the way for the establishment of structure-function relations and further development of novel electrochemical synthesis systems.

Interconnected Periodic Macroporous NaNbO3 for High-Efficiency Solar-Driven Photocatalytic Hydrogen Evolution

Highly ordered periodic macroporous structures have been extensively utilized to significantly enhance the photocatalytic activity. However, constructing 3D interconnected ordered porous ternary nanostructures with highly crystalline frameworks remains a formidable challenge. Here, we introduce the design and fabrication of 3D interconnected periodic macroporous NaNbO3 (PM NaNbO3) to effectively increase the density of surface-active sites and optimize the photogenerated carrier-transfer efficiency. By incorporating Pt as a cocatalyst, PM NaNbO3 exhibits an exceptional photocatalytic hydrogen generation rate of 10.04 mmol h-1 g-1, which is approximately six and five times higher than those of calcined NaNbO3 (C-NaNbO3) and hydrothermal NaNbO3 (H-NaNbO3), respectively. This outstanding performance can be attributed to the synergistic effects arising from its well-interconnected pore architecture, large surface area, enhanced light absorption capability, and improved charge carrier separation and transport efficiency. The findings presented in this study demonstrate an innovative approach toward designing hierarchically periodic macroporous materials for solar-driven hydrogen production.

Graphitic carbon nitride (g-C3N4)-assisted materials for the detection and remediation of hazardous gases and VOCs

Graphitic carbon nitride (g-C3N4)-based materials are attracting attention for their unique properties, such as low-cost, chemical stability, facile synthesis, adjustable electronic structure, and optical properties. These facilitate the use of g-C3N4 to design better photocatalytic and sensing materials. Environmental pollution by hazardous gases and volatile organic compounds (VOCs) can be monitored and controlled using eco-friendly g-C3N4- photocatalysts. Firstly, this review introduces the structure, optical and electronic properties of C3N4 and C3N4 assisted materials, followed by various synthesis strategies. In continuation, binary and ternary nanocomposites of C3N4 with metal oxides, sulfides, noble metals, and graphene are elaborated. g-C3N4/metal oxide composites exhibited better charge separation that leads to enhancement in photocatalytic properties. g-C3N4/noble metal composites possess higher photocatalytic activities due to the surface plasmon effects of metals. Ternary composites by the presence of dual heterojunctions improve properties of g-C3N4 for enhanced photocatalytic application. In the later part, we have summarised the application of g-C3N4 and its assisted materials for sensing toxic gases and VOCs and decontaminating NOx and VOCs by photocatalysis. Composites of g-C3N4 with metal and metal oxide give comparatively better results. This review is expected to bring a new sketch for developing g-C3N4-based photocatalysts and sensors with practical applications.

Photocatalytic Aerobic Oxidation of Biomass-Derived 5-HMF to DFF over MIL-53(Fe)/g-C3N4 Composite

A MIL-53(Fe)/g-C₃N₄ heterogeneous composite was synthesized and applied in photocatalytic oxidation of 5-hydroxymethylfurfural (5-HMF) to 2,5-diformylfuran (DFF). The systematic investigation indicated that the introduction of MIL-53(Fe) into g-C₃N₄ increased the specific surface area, broadened the visible-light response region, and promoted the separation efficiency of the photo-generated electron-hole pairs. The 10% MIL-53(Fe)/g-C₃N₄ heterogeneous composite achieved the best photocatalytic oxidation activity with 74.5% of 5-HMF conversion under simulated sunlight, which was much higher than that of pristine g-C₃N₄ and MIL-53(Fe). The MIL-53(Fe)/g-C₃N₄ composite displayed good photocatalytic reusability and stability. Based on the characterization results and photocatalytic performance, a Z-scheme photocatalytic mechanism of the MIL-53(Fe)/g-C₃N₄ composite was suggested, and a possible reaction route was deduced.

Waste Biomass Selective and Sustainable Photooxidation to High-Added-Value Products: A Review

Researchers worldwide seek to develop convenient, green, and ecological production processes to synthesize chemical products with high added value. In this sense, lignocellulosic biomass photocatalysis is an excellent process for obtaining various outcomes for the industry. One issue of biomass transformation via heterogeneous catalysis into valuable chemicals is the selection of an adequate catalyst that ensures high conversion and selectivity at low costs. Titanium oxide (TiO2), is widely used for several applications, including photocatalytic biomass degradation, depolymerization, and transformation. Graphite carbon nitride (g-C3N4) is a metal-free polymeric semiconductor with high oxidation and temperature resistance and there is a recent interest in developing this catalyst. Both catalysts are amenable to industrial production, relatively easy to dope, and suited for solar light absorption. Recent investigations also show the advantages of using heterojunctions, for biomass derivates production, due to their better solar spectrum absorption properties and, thus, higher efficiency, conversion, and selectivity over a broader spectrum. This work summarizes recent studies that maximize selectivity and conversion of biomass using photocatalysts based on TiO2 and g-C3N4 as supports, as well as the advantages of using metals, heterojunctions, and macromolecules in converting cellulose and lignin. The results presented show that heterogeneous photocatalysis is an interesting technology for obtaining several chemicals of industrial use, especially when using TiO2 and g-C3N4 doped with metals, heterojunctions, and macromolecules because these modified catalysts permit higher conversion and selectivity, milder reaction conditions, and reduced cost due to solar light utilization. In order to apply these technologies, it is essential to adopt government policies that promote the use of photocatalysts in the industry, in addition to encouraging active collaboration between photooxidation research groups and companies that process lignocellulosic biomass.

Advances in Catalytic Routes for the Homogeneous Green Conversion of the Bio-Based Platform 5-Hydroxymethylfurfural

5-Hydroxymethylfufural (HMF) is an intriguing platform molecule that can be obtained from biomasses and that can lead to the production of a wide range of products, intermediates, or monomers. The presence of different moieties in HMF (hydroxy, aldehyde, furan ring) allows to carry out different transformations such as selective oxidations and hydrogenations, reductive aminations, etherifications, decarbonylations, and acetalizations. This is a great chance in a biorefinery perspective but requires the development of active and highly selective catalysts. In this view, homogeneous catalysis can lead to efficient conversion of HMF at mild reaction conditions. This Review discussed the recent achievements in homogeneous catalysts development and application to HMF transformations. The effects of metal nature, ligands, solvents, and reaction conditions were reported and critically reviewed. Current issues and future chances have been presented to drive future studies toward more efficient and scalable processes.

Carbon-Based Nanocatalysts (CnCs) for Biomass Valorization and Hazardous Organics Remediation

The continuous increase of the demand in merchandise and fuels augments the need of modern approaches for the mass-production of renewable chemicals derived from abundant feedstocks, like biomass, as well as for the water and soil remediation pollution resulting from the anthropogenic discharge of organic compounds. Towards these directions and within the concept of circular (bio)economy, the development of efficient and sustainable catalytic processes is of paramount importance. Within this context, the design of novel catalysts play a key role, with carbon-based nanocatalysts (CnCs) representing one of the most promising class of materials. In this review, a wide range of CnCs utilized for biomass valorization towards valuable chemicals production, and for environmental remediation applications are summarized and discussed. Emphasis is given in particular on the catalytic production of 5-hydroxymethylfurfural (5-HMF) from cellulose or starch-rich food waste, the hydrogenolysis of lignin towards high bio-oil yields enriched predominately in alkyl and oxygenated phenolic monomers, the photocatalytic, sonocatalytic or sonophotocatalytic selective partial oxidation of 5-HMF to 2,5-diformylfuran (DFF) and the decomposition of organic pollutants in aqueous matrixes. The carbonaceous materials were utilized as stand-alone catalysts or as supports of (nano)metals are various types of activated micro/mesoporous carbons, graphene/graphite and the chemically modified counterparts like graphite oxide and reduced graphite oxide, carbon nanotubes, carbon quantum dots, graphitic carbon nitride, and fullerenes.

Hydrogen production via water splitting over graphitic carbon nitride (g-C3N4 )-based photocatalysis

Photocatalytic splitting of water into hydrogen and oxygen using semiconductor photocatalysts and light irradiation has been attracted much attention and considered to be an alternative for nonrenewable fossil fuel to solve environmental problems and energy crisis and also an as promising approach to produce clean, renewable hydrogen fuel. Owing to their various advantages such as low cost and environmental friendly, chemical, and thermal stability, appropriate band structure, graphitic carbon nitride (g-C3N4 ) photocatalysts have gained multitudinous attention because of their great potential in solar fuels production and environmental remediation. However, due to its fast charge carrier’s recombination, low surface, and limited absorption of the visible light restrict their activity toward hydrogen evolution and numerous modification techniques were applied to solve these problems such as structural modification, metal/nonmetal doping, and noble metal loading, and coupling semiconductors. In this chapter, we summarize recent progress in the synthesis and characterization of the g-C3N4-based photocatalyst. Several modification methods used to enhance the photocatalytic hydrogen production of g-C3N4-based photocatalyst were also highlighted. This chapter ends with the future research and challenges of hydrogen production over g-C3N4-based photocatalyst.

Recent Advances and Challenges in Photoreforming of Biomass-Derived Feedstocks into Hydrogen, Biofuels, or Chemicals by Using Functional Carbon Nitride Photocatalysts

Photoreforming of biomass into hydrogen, biofuels, and chemicals is highly desired, yet this field of research is still in its infancy. Developing an efficient, novel, and environmentally friendly photocatalyst is key to achieving these goals. To date, the nonmetallic and eco-friendly material carbon nitride has found many uses in reactions such as water splitting, CO₂ reduction, N₂ fixation, and biorefinery, owing to its outstanding photocatalytic activity. However, a narrow light absorption range and fast charge recombination are often encountered in the pristine carbon nitride photocatalytic system, which resulted in unsatisfying photocatalytic activity. To improve the photocatalytic performance of pure carbon nitride in biomass reforming, modification is needed. In this Review, the design and preparation of functional carbon nitride, as well as its photocatalytic properties for the synthesis of hydrogen, biofuels, and chemicals through biomass reforming, are discussed alongside potential avenues for its future development.

Microwave-assisted synthesis of ZnAl-LDH/g-C3N4 composite for degradation of antibiotic ciprofloxacin under visible-light illumination

Ciprofloxacin (CIP) is a fluoroquinolone family antibiotic pollutant. CIP existence in water environment has been rising very fast in day-to-day life and subsequently, it gives enormous health issues for humans because of its potent biological activity. To encounter this, current researchers are focusing on the development of highly efficient visible light semiconductor nanocomposites with potential photocatalytic activity. In the present work, we have successfully synthesized highly efficient zinc-aluminum layered double hydroxides with graphitic carbon nitride (ZALDH/CN) composites via a simple microwave irradiation method first time for the degradation of CIP under visible light. The fabricated materials are subsequently characterized by various spectroscopic techniques. UV-Vis DRS, TRFL, XRD, FT-IR, BET, FE-SEM, TEM, and XPS for optical, crystal structure, morphological, and elemental analysis. The main reactive intermediates which are formed during the photocatalytic degradation process were analyzed by LC-MS analysis. It is worth to note that, the optimized ZALDH/CN-10 composite showed the highest photo-degradation rate constant of 1.22 × 10^-2 min^-1 with 84.10% degradation is higher than bare CN and ZALDH photocatalysts. Based on the electron-hole pair trapping experiment results, possible CIP photo-degradation mechanism was also explained in the present study. With all results, this work demonstrates the ZALDH/CN composite materials showed a high synergistic effect with more specific surface area. Highest specific surface area leads to enhanced visible light adsorption capacity. Subsequently improved number of catalytically active sites. Furthermore, as compared with pure materials, composites of ZALDH/CN are having low electron-hole pair recombination. Consequently, the composites ZALDH/CN showed superior photocatalytic activity for antibiotic pollutant CIP degradation under visible-light illumination.

In situ fabrication of niobium pentoxide/graphitic carbon nitride type-II heterojunctions for enhanced photocatalytic hydrogen evolution reaction

The effective conversion of sunlight into H₂ by photocatalytic water splitting has emerged as the most promising strategy to alleviate the energy crisis. In this work, niobium pentoxide (Nb₂O₅)/graphitic carbon nitride (g-C₃N₄) type-II heterojunctions with high photocatalytic H₂ evolution rate under both visible and simulated solar light are fabricated via a novel approach involving in situ 'hydrolysis/calcination' loading of Nb₂O₅ nanoparticles on the g-C₃N₄ surface. After the optimisation, the Nb₂O₅/g-C₃N₄ heterojunctions with 5 wt% Nb₂O₅ content delivers high H₂ evolution rates of 2.07 ± 0.03 and 6.77 ± 0.12 mmol g^-1 h^-1 under visible and simulated solar light exposure, respectively, which are 4.1 and 4.2 times superior to those of pure g-C₃N₄. According to the subsequent characterisations, the effective Nb₂O₅/g-C₃N₄ heterojunction offers sufficient contact interface, which is favourable for the efficient separation of photogenerated charges. In addition, the Nb₂O₅/g-C₃N₄ heterojunction possesses a large surface area, which contributes to the interfacial contact between photocatalyst and water. This work provides insights into the synthesis of novel g-C₃N₄-based hetero-photocatalysts with strong solar energy conversion capabilities.

Innovative Protocols in the Catalytic Oxidation of 5-Hydroxymethylfurfural

5-Hydroxymethylfurfural (HMF) has been identified as one of the most promising biomass-based multi-purpose platform molecules. Innovative protocols, namely electrocatalysis, photocatalysis, and microwave (MW)-assisted chemistry, as well as continuous-flow systems, add a new dimension and another promising toolbox for the oxidation of HMF in recent years. This Minireview deals with recent progress in the catalytic oxidation of HMF to 2,5-furandicarboxylic acid (FDCA) and other intermediates using noble, non-noble, and metal-free systems deploying emerging protocols. Selective HMF downstream oxidation products could be obtained not only via common catalyst modifications, namely nature of the metal, preparative method, and the property of deployed support, but also by using innovative processes.

Photocatalytic Oxidation of HMF under Solar Irradiation: Coupling of Microemulsion and Lyophilization to Obtain Innovative TiO2-Based Materials

The photocatalytic oxidation of biomass-derived building blocks such as 5-hydroxymethylfurfural (HMF) is a promising reaction for obtaining valuable chemicals and the efficient long-term storage of solar radiation. In this work, we developed innovative TiO₂-based materials capable of base-free HMF photo-oxidation in water using simulated solar irradiation. The materials were prepared by combining microemulsion and spray-freeze drying (SFD), resulting in highly porous systems with a large surface area. The effect of titania/silica composition and the presence of gold-copper alloy nanoparticles on the properties of materials as well as photocatalytic performance were evaluated. Among the lab-synthesized photocatalysts, Ti₁₅Si₈₅ SFD and Au₃Cu₁/Ti₁₅Si₈₅ SFD achieved the higher conversions, while the best selectivity was observed for Au₃Cu₁/Ti₁₅Si₈₅ SFD. The tests with radical scavengers for both TiO₂-m and Au₃Cu₁/Ti₁₅Si₈₅ SFD suggested that primary species responsible for the selective photo-oxidation of HMF are photo-generated electrons and/or superoxide radicals.