Synthesis of a novel macromolecular carbon-nitrogen-phosphorous intumescent flame retardant

Preparation of a Polymeric Phosphoramide Flame-Retardant and Its Effect on the Flame-Retardant Properties of Epoxy Resin

The flammability of epoxy resins and knowing how to achieve curing are particularly important factors during use. A novel approach for enhancing the fire resistance and reducing the smoke emission of epoxy resin during the curing process is suggested, which involves the utilization of a three-source integrated polymerization intumescent flame-retardant. In this study, the synthesis of poly 4,4-diaminodiphenylsulfone spirocyclic pentaerythritol bisphosphonate (PCS) is achieved through using solution polymerization, utilizing 4,4'-diaminodiphenylsulfone (DDS) and spirocyclic pentaerythritol bisphosphorate disphosphoryl chloride (SPDPC) as initial components. Following that, the EP underwent the inclusion of PCS to examine its resistance to heat, its ability to prevent flames, its effectiveness in reducing smoke and its curing effect. Compared to the unmodified epoxy resin, the addition of PCS can not only cure the epoxy resin, but also decompose before the epoxy resin and has a good carbonization effect. With the addition of 7 wt.% PCS, the LOI value can achieve 31.2% and successfully pass the UL-94 test with a V-0 rating. Moreover, the cone calorimeter experiment demonstrated a noteworthy decline of 59.7% in the maximum heat release rate (pHRR), 63.7% in overall heat release (THR), and 42.3% in total smoke generation (TSP). Based on the examination of TG-FTIR and SEM findings, there is ample evidence to suggest that PCS, functioning as a phosphorus-nitrogen intumescent flame-retardant that combines three origins, has the potential to exhibit a favorable flame-retardant impact in both its gas and condensed phases.

Composites Filled with Metal Organic Frameworks and Their Derivatives: Recent Developments in Flame Retardants

Polymer matrix is vulnerable to fire hazards and needs to add flame retardants to enhance its performance and make its application scenarios more extensive. At this stage, it is more necessary to add multiple flame-retardant elements and build a multi-component synergistic system. Metal organic frameworks (MOFs) have been studied for nearly three decades since their introduction. MOFs are known for their structural advantages but have only been applied to flame-retardant polymers for a relatively short period of time. In this paper, we review the development of MOFs utilized as flame retardants and analyze the flame-retardant mechanisms in the gas phase and condensed phase from the original MOF materials, modified MOF composites, and MOF-derived composites as flame retardants, respectively. The effects of carbon-based materials, phosphorus-based materials, nitrogen-based materials, and biomass on the flame-retardant properties of polymers are discussed in the context of MOFs. The construction of MOF multi-structured flame retardants is also introduced, and a variety of MOF-based flame retardants with different morphologies are shown to broaden the ideas for subsequent research.

Characterization and Performance Testing of an Intumescent Nanoinhibitor for Inhibiting Coal Spontaneous Combustion

Considering disadvantages such as the low thermal stability and environmental pollution of existing gel inhibitors, a green and stable intumescent nanoinhibitor (INI) was prepared and tested. First, polyacrylamide (PAM), nano-silica, and intumescent flame retardant (IFR) were selected as raw materials. The INI was prepared by nanoparticle modification and cross-linking polymerization. Then, the structure and physical properties of INI were tested by Fourier transform infrared spectroscopy, scanning electron microscopy, and rheological experiments. Meanwhile, the inhibition performance of INI was studied through thermogravimetric analysis-Fourier transfer infrared spectroscopy (TGA-FTIR) analysis. The results suggest that the nanomodification improved the dispersibility of INI particles. The addition of modified nano-silica (MNS) and IFR enhances the strength of the reticular structure, thereby improving the transport convenience and covering ability of the INI gel. At high temperatures, IFR can generate a porous foamed carbon layer that further coats the coal. After INI inhibition treatment, the characteristic temperature and activation energy of coal were significantly improved, and the production of carbon monoxide and carbon dioxide decreased. Hence, irrespective of physical properties, physical inhibition performance, or chemical inhibition performance, INI performed well. Research results can provide valuable references for the preparation and performance study of a coal spontaneous combustion inhibitor.

Flame Retardancy Properties and Physicochemical Characteristics of Polyurea-Based Coatings Containing Flame Retardants Based on Aluminum Hydroxide, Resorcinol Bis(Diphenyl Phosphate), and Tris Chloropropyl Phosphate

Polyurea is a synthetic material made by the reaction of isocyanate and polymer blend-containing amines. Due to its outstanding mechanical properties and fast curing, polyurea-based coatings have found dozens of applications, including waterproofing and anti-corrosion coatings. Further development of this material can create a flame-retardant product, a good alternative for common products available on the market, such as intumescent coatings. To improve the flame retardancy of polyurea, several flame retardants were investigated. The influence of aluminum hydroxide, resorcinol bis(diphenyl phosphate) (RDP), and tris chloropropyl phosphate (TCPP) on flame retardancy and morphology was studied. The following methods were used: infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, limiting oxygen index, and tensile strength. The examinations mentioned above showed the improvement of flame-retardancy of polyurea for two products: chlorinated organophosphate and organophosphate. Nevertheless, using the chlorinated organophosphate additive caused a rapid deterioration of mechanical properties.