One-step processing of low-cost and superb natural magnetic adsorbent: kinetics and thermodynamics investigation for dye removal from textile wastewater

Cu nanoparticles grafting on the surface of ZnO nanostructures to boost the porosity and surface area for effective removal of manganese ions from aqueous solutions

Designing highly adsorptive materials for wastewater treatment via facile approaches is still challenging. To boost the recovery of heavy metals from wastewater, surface and structure modification are considered a successful route. Herein, we report the design of ZnO nanoparticles by a simple thermal decomposition method followed by grafting Cu nanoparticles (Cu NPs) over the ZnO surface. Cu/ZnO was prepared with different Cu ratios, 0.01 and 1%. It was found that incorporating Cu into ZnO improved the porosity and surface area of ZnO. The adsorption ability of Cu/ZnO compared with bare ZnO was studied towards removing manganese ions from wastewater. The effects of several parameters, such as pH, temperature, contact time, and initial ion concentrations, were studied. The maximum removal of manganese was found at pH 2, 20 °C after 60 min in the presence of 1 g/L adsorbent. The role of Cu grafted on the surface of ZnO was discussed. The rates of adsorption were found to follow the pseudo-second-order model. The results showed better fitting to Freundlich isotherm. The thermodynamic study revealed that the sorption process is spontaneous, exothermic, and favorable at low temperatures. The free energy (ΔG°), enthalpy (ΔH°), and entropy (ΔS°) changes were calculated to predict the nature of adsorption.

An Updated Overview of Magnetic Composites for Water Decontamination

Water contamination by harmful organic and inorganic compounds seriously burdens human health and aquatic life. A series of conventional water purification methods can be employed, yet they come with certain disadvantages, including resulting sludge or solid waste, incomplete treatment process, and high costs. To overcome these limitations, attention has been drawn to nanotechnology for fabricating better-performing adsorbents for contaminant removal. In particular, magnetic nanostructures hold promise for water decontamination applications, benefiting from easy removal from aqueous solutions. In this respect, numerous researchers worldwide have reported incorporating magnetic particles into many composite materials. Therefore, this review aims to present the newest advancements in the field of magnetic composites for water decontamination, describing the appealing properties of a series of base materials and including the results of the most recent studies. In more detail, carbon-, polymer-, hydrogel-, aerogel-, silica-, clay-, biochar-, metal-organic framework-, and covalent organic framework-based magnetic composites are overviewed, which have displayed promising adsorption capacity for industrial pollutants.

Efficiency and selectivity of cost-effective Zn-MOF for dye removal, kinetic and thermodynamic approach

Green synthesis of metal-organic frameworks (MOFs) has attracted a lot of attention as a crucial step for practical industrial applications. In this work, green synthesis of zinc(II) metal-organic framework (Zn-MOF) has been carried out at room temperature. The Zn metal (node) was extracted from spent domestic batteries, and the linker was benzene di-carboxylic acid (BDC). The characterization of the as-prepared Zn-MOF was accomplished by PXRD, FT-IR spectroscopy, SEM, TEM, TGA, and nitrogen adsorption at 77 K. All the characterization techniques strongly supported that as-synthesized Zn-MOF using metallic solid waste Zn is similar to that was reported in the literature. The as-prepared Zn-MOF was stable in water for 24 h without any changes in its functional groups and framework. The prepared Zn-MOF was tested for the adsorption of three dyes, two anionic dyes, aniline blue (AB), and orange II (O(II)) as well as methylene blue (MB), an example of cationic dye from aqueous solution. AB has the highest equilibrium adsorbed amount, qe, of value 55.34 mg g-1 at pH = 7 and 25 °C within 40 min. Investigation of the adsorption kinetics indicated that these adsorption processes could be described as a pseudo-second-order kinetic model. Furthermore, the adsorption process of the three dyes was described well by the Freundlich isotherm model. According to the thermodynamic parameters, the adsorption of AB on the prepared Zn-MOF was an endothermic and spontaneous process. In contrast, it was non-spontaneous and exothermic for the uptake of O(II) and MB. This study complements the business case development model of "solid waste to value-added MOFs."

Graphene-magnetite functionalized diatomite for efficient removal of organochlorine pesticides from aquatic environment

A unique composite based on graphene oxide, magnetite, and diatomite was synthetized by eco-friendly dry coating technique for the removal of four toxic organochlorine pesticides from agricultural drainage. The prepared composite was fully characterized using X-ray fluorescence (XRF), X-ray diffraction (XRD), particle size analyzer, Vibrating-sample magnetometer (VSM), magnetic susceptibility meter, zeta potential, scanning electron microscopy-energy dispersive X-ray spectrometer (SEM-EDS), and Brunauer-Emmett-Teller analysis (BET) techniques. The characterization results confirmed the fabrication of a discrete core/shell structured composite possess both adsorptive and magnetic nature. The surface area, pore volume and pore diameter were 23.4 m²/g, 0.0026 cm³/g, and 4.5 nm, respectively. The amenability to use the fabricated composite as an adsorbent for some organochlorine pesticides was investigated under different conditions of concentration, time, pH, and temperature. Batch adsorption experiment showed that 97% removal efficiency was observed for all the studied pesticides with adsorption capacities of 7.78 mg/g after 2 h contact time and at any pH region. The adsorption was exothermic (ΔH < 0), spontaneous (ΔG° < 0), followed pseudo 2nd order kinetics (R² > 0.998), and fitted well to Langmuir's isotherm pattern for all pesticides (R² > 0.98). It is assumed that organochlorine pesticides were initially physisorbed by the graphene nanoplatelets via hydrophobic and π-π interactions along with chemisorption for forming monolayer. Moreover, the pesticides molecules could diffuse in the DMG composite micropores and be trapped in the structural defects. The regeneration of the composite exhibited over 90% removal efficiency even after seven cycles. The fabricated composite was examined to remove organochlorine from a real water sample, the obtained results suggest the possibility to use this composite as an economical, effective and sustainable adsorbent for the treatment of pesticides contaminating water.

Insights on applications of bentonite clays for the removal of dyes and heavy metals from wastewater: a review

In recent decades, increased industrial, agricultural, and domestic activities have resulted in the release of various pollutants into the aquatic systems, which require a reliable and environmentally friendly method to remove them. Adsorption is one of the most cost-effective and sustainable wastewater treatment techniques. A plethora of low-cost bio-based adsorbents have been developed worldwide so far to supplant activated carbon and its high processing costs. Bentonite clays (BCs), whether in natural or modified form, have gained enormous potential in wastewater treatment and have been used successfully as a novel and cost-effective bio-sorbent for removing organic and inorganic pollutants from the liquid suspension. It has become a sustainable solution for wastewater treatment due to its variety of surface and structural properties, superior chemical stability, high capacity for cation exchange, elevated surface area due to its layered structure, non-toxicity, abundance, low cost, and high adsorption capacity compared to other clays. This review encompasses comprehensive literature about various modification techniques and adsorption mechanisms of BCs concerning dyes and heavy metal removal from wastewater. A critical overview of different parameters for optimizing adsorption capacity and regeneration via the desorption technique has also been presented here. Finally, a conclusion has been drawn with some future research recommendations based on technological challenges encountered in industrializing these materials.

A review of the main methods for composite adsorbents characterization

Adsorption is a promising technology for removing several contaminants from aqueous matrices. In the last years, researchers worldwide have been working on developing composite adsorbents to overcome some limitations and drawbacks of conventional adsorbent materials, which depend on various factors, including the characteristics of the adsorbents. Therefore, it is essential to characterize the composite adsorbents to describe their properties and structure and elucidate the mechanisms, behavior, and phenomenons during the adsorption process. In this sense, this work aimed to review the main methods used for composite adsorbent characterization, providing valuable information on the importance of these techniques in developing new adsorbents. In this paper, we reviewed the following methods: X-Ray diffraction (XRD); spectroscopy; scanning electron microscopy (SEM); N2 adsorption/desorption isotherms (BET and BJH methods); thermogravimetry (TGA); point of zero charge (pHPZC); elemental analysis; proximate analysis; swelling and water retention capacities; desorption and reuse.

Superhydrophobic magnetic sorbent via surface modification of banded iron formation for oily water treatment

In the current study, a simple dry coating method was utilized to fabricate a super-hydrophobic super-magnetic powder (ZS@BIF) for oily water purification using zinc stearate (ZS) and banded iron formation (BIF). The produced composite was fully characterized as a magnetic sorbent for oily water treatment. The results of X-ray diffraction diffractometer (XRD), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS) and particle size analysis revealed the fabrication of homogenous hydrophobic-magnetic composite particles with core–shell structure. Contact angle and magnetic susceptibility results showed that 4 (BIF): 1 (Zs) was the ideal coverage ratio to render the core material superhydrophobic and preserve its ferromagnetic nature. The capability of the fabricated composite to sorb. n-butyl acetate, kerosene, and cyclohexane from oil–water system was evaluated. ZS@BIF composite showed a higher affinity to adsorb cyclohexane than n-butyl acetate and kerosene with a maximum adsorption capacity of about 22 g g⁻¹ and 99.9% removal efficiency. Moreover, about 95% of the adsorbed oils could be successfully recovered (desorbed) by rotary evaporator and the regenerated ZS@BIF composite showed high recyclability over ten repeated cycles.

Recent advances in magnetic composites as adsorbents for wastewater remediation

The scarcity of clean drinking water combined with other environmental and anthropogenic effects necessitates the demand for development of advanced technology for cleaning polluted water. Adsorption is one such technique that does not produce toxic byproducts and solves the problem of cleaning contaminated water at a lower cost. In recent years, magnetic composites, as adsorbent, have gained lot of attention due to their reusability which makes them sustainable and economical. This review article describes the challenges related to water quality, scarcity and then summarizes the current treatment technologies and advancement in the field of adsorption to resolve the prevailing concerns. The review includes an insight into the recent research being carried out in the field of magnetic composites and nanocomposites, as adsorbent, covering, probably, all aspects of what is going around the globe. Different materials, like polymers, biomaterials, clays and metal organic framework (MOF)-based magnetic composites and their applications in wastewater treatment processes have been included. The article is a comprehensive review on the application of different materials to detoxify various diverse pollutants with prime focus on magnetic composites. The thorough study of this review will surely bring upcoming researchers closer to the future possibilities of research in wastewater treatment.

Dye adsorption of aluminium- and zirconium-based metal organic frameworks with azobenzene dicarboxylate linkers

The high efficiency of metal-organic-frameworks (MOFs) such as the ZIF, MIL and UiO type species in dye adsorption is well established. Recently, an emerging class of photoresponsive azobenzene-based MOFs has found suitable application in gas adsorption. However, there is a dearth of research on their use in the adsorption of dyes and other water pollutants. In this research, two microporous photoresponsive azobenzene dicarboxylate MOFs of Al³⁺ (Al-AZB) and Zr⁴⁺ (Zr-AZB) were synthesized for the adsorption of congo red (CR) dye. The surface and textural properties of the synthesized MOFs were characterized by FTIR, PXRD, SEM, TGA, BET and pore analysis. Both MOFs were crystalline, thermally stable up to 300 °C and stable in aqueous medium at room temperature. The Al-AZB displayed a higher surface area (2718 m²/g) than the Zr-AZB (1098 m²/g), which significantly impacted the higher adsorption of CR. Besides, pore volumes of 0.86 cm³/g and 0.35 cm³/g were obtained for Al-AZB and Zr-AZB, respectively. The maximum adsorption capacity of Al-AZB and Zr-AZB was 456.6 mg/g and 128.9 mg/g, respectively, with the former superior to other potent adsorbents. The pseudo-second-order and Langmuir models were well correlated with the dye uptake on the MOFs. Thermodynamics revealed random and endothermic sorption of CR dominated by chemisorption, while efficient regeneration and reuse of both MOFs were achieved using dimethylformamide as eluent. The results proved the potency of the synthesized photoresponsive MOFs, as highly efficient and reusable materials for dye adsorption.