Improved visible-light driven photocatalysis by loading Au onto C3N4 nanorods for degradation of RhB and reduction of CO2

Facile Synthesis of Oxygen-Doped g-C3N4 Mesoporous Nanosheets for Significant Enhancement of Photocatalytic Hydrogen Evolution Performance

In this work, oxygen-doped g-C3N4 mesoporous nanosheets (O-CNS) were synthesized via a facile recrystallization method with the assistance of H2O2. The crystal phase, chemical composition, morphological structure, optical property, electronic structure and electrochemical property of the prepared O-CNS samples were well investigated. The morphological observation combined with the nitrogen adsorption-desorption results demonstrated that the prepared O-CNS samples possessed nanosheet-like morphology with a porous structure. Doping O into g-C3N4 resulted in the augmentation of the specific surface area, which could provide more active sites for photocatalytic reactions. Simultaneously, the visible light absorption capacity of O-CNS samples was boosted owing to the regulation of O doping. The built energy level induced by the O doping could accelerate the migration rate of photoinduced carriers, and the porous structure was most likely to speed up the release of hydrogen during the photocatalytic hydrogen process. Resultantly, the photocatalytic hydrogen production rate of the optimized oxygen-doped g-C3N4 nanosheets reached up to 2012.9 μmol·h-1·g-1, which was 13.4 times higher than that of bulk g-C3N4. Thus, the significantly improved photocatalytic behavior was imputed to the synergistic effect of the porous structure, the increase in active sites, and the enhancement of visible light absorption and charge separation efficiency. Our research highlights that the synergistic effect caused by element doping will make a great contribution to the remarkable improvement in photocatalytic activity, providing a new inspiration for the construction of novel catalysts.

Organic pollutant degradation for micro-molecule product emission over SiO2 layers-coated g-C3N4 photocatalysts

In this study, a SiO2 layer-coated g-C3N4 catalyst was prepared by a sol-gel method to overcome the poor adsorption ability and high recombination rate of charge carriers of pristine g-C3N4. SEM and TEM images indicated that SiO2 nanoparticles were coated on the surface of g-C3N4 nanoparticles with a layered structure and the layers were tightly contacted with g-C3N4. XRD patterns, FTIR spectra, UV-vis spectra and XPS spectra revealed that the structure of g-C3N4 was not destroyed and its photoelectric catalytic properties were not suppressed by the coating of SiO2 layers. Adsorption experiments revealed that the SiO2 layers improved the adsorption performance of g-C3N4 and their ratios were adjusted. The molecular weights of the final products of the degradation of RhB and antibiotics were at the micro-molecule level while the amount of g-C3N4 reached 1.2% of the mass fraction, which were more suitable for pollutant degradation compared with those of g-C3N4 due to its poor adsorption ability. The reason for this was likely that the SiO2 layers were not only beneficial for the adsorption of pollutants and intermediate products but also for prolonging the life time of the separated electrons and holes. Finally, active trapping experiments confirmed that both the holes and superoxide radicals were the main factors in the degradation of RhB and antibiotics, with the superoxides being the most active species.

Fabrication and characterization of ZnGa1.01Te2.13/g-C3N4 heterojunction with enhanced photocatalytic activity

The extensive consumption of fossil fuels increases CO2 concentration in the atmosphere, resulting in serious global warming problems. Meanwhile, the problem of water contamination by organic substances is another significant global challenge. We have successfully synthesized ZnGa1.01Te2.13/g-C3N4 (ZGT/GCN) composites for the first time as effective photocatalysts for both pollutant degradation and CO2 reduction. ZGT/GCN composites were synthesized by a simple hydrothermal method. The prepared photocatalysts were characterized by XRD, SEM, TEM-EDS, DRS, BET, PL, and XPS. The ZGT/GCN heterojunction exhibited considerably enhanced photocatalytic activity in the degradation of crystal violet (CV) as well as in the photoreduction of CO2 when compared to pure ZGT and GCN semiconductors. The optimal rate constant for CV degradation was obtained with the ZGT-80%GCN composite (0.0442 h-1), which is higher than the constants obtained with individual ZGT and GCN by 7.75 and 1.63 times, respectively. Moreover, the CO2 reduction yields into CH4 by ZGT-80%GCN was 1.013 μmol/g in 72 h, which is 1.21 and 1.08 times larger than the yields obtained with ZGT and GCN. Scavenger and ESR tests were used to propose the photocatalytic mechanism of the ZGT/GCN composite as well as the active species in the CV degradation.

Visible light-driven H2O2 synthesis over Au/C3N4: medium-sized Au nanoparticles exhibiting suitable built-in electric fields and inhibiting reverse H2O2 decomposition

Visible light-driven H₂O₂ production presents the unique merits of sustainability and environmental friendliness. The size of noble metal nanoparticles (NPs) determines their dispersion and electronic structure and greatly affects their photocatalytic activity. In this work, a series of sized Au NPs over C₃N₄ were modulated for H₂O₂ production. The results show that there is a volcanic trend in H₂O₂ with the decrease of Au particle size, and the highest H₂O₂ production rate of 1052 μmol g^-1 h^-1 is obtained from medium-sized Au particles (∼8.7 nm). The relationship between structure and catalytic performance is supported by experimental and theoretical methods. (1) First, medium-sized Au NPs promote photon absorption, and have a suitable built-in electric field at the heterojunction, which can be successfully tuned to achieve a more efficient h⁺-e^- spatial separation. (2) Second, medium-sized Au NPs enhance O₂ adsorption, and create selective 2e^- O₂ reduction reaction sites. (3) Particularly, medium-sized Au NPs promote the desorption of produced H₂O₂ and inhibit H₂O₂ decomposition, finally leading to the highest H₂O₂ selectivity. Excellent catalytic performance will be obtained by finely optimizing the particle size in a certain range. This work provides a new idea for preparing high efficiently photocatalysts for H₂O₂ production.

Visible-light-responsive photocatalytic inactivation of ofloxacin-resistant bacteria by rGO modified g-C3N4

The visible light responsive graphitic nitride (g-C₃N₄) mediated photocatalysis has drawn extensive attention in water treatment field. Carbon doping could improve the photocatalytic activity of g-C₃N₄ in promoting charge separation efficiency, visible-light utilization, etc. In this paper, the g-C₃N₄ (as MC) was modified by barbituric acid (as MCB_0.07) and further treated by reduced graphene oxide (rGO) (as n%GCN) and then applied to inactivate ofloxacin-resistant bacteria (OFLA) under light irradiation at UVA-visible wavelength. The results showed that the n%GCN presented strong photocatalytic activity when the GO mass ratio was 7.5% (as 7.5%GCN). The inactivation efficiencies of OFLA by MC, MCB_0.07, and 7.5%GCN were 5.77 log, 8.48 log, and 8.25 log, respectively, under UVA-visible wavelength (λ > 305 nm), compared to 4.83 log, 5.56 log, and 6.08 log, respectively, within 16 h under visible wavelength (λ > 400 nm). The rGO-doping obviously improved the inactivation efficiency of MCB_0.07 on OFLA under visible wavelength. Furthermore, the photoreactivation and dark repair phenomena of OFLA were examined after MC, MCB_0.07, and 7.5%GCN treatment, respectively, and it was found that all approaches led to permanent damage to OFLA of which the regrowth was not observed after 24-48 h. Based on the quenching test, reactive oxygen species of O₂^-• and hole (h⁺) exhibited dominant roles in the photocatalytic inactivation of OFLA, which may result in oxidative stress and damage to the cell membrane. This study could shed light on the inactivation of OFLA under visible light radiation by rGO modified g-C₃N₄.

Facile assembly and excellent elimination behavior of porous BiOBr-g-C3N4 heterojunctions for organic pollutants

Photocatalysis can be an effective technique for eliminating organic contaminants from water. In this study, BiOBr flower-spheres coupled with porous graphite carbon nitride (g-C₃N₄) were synthesized by controlling the dosage of cetyltrimethylammonium bromide (CTAB). Various characterization techniques were then applied to elucidate the structure-performance relationships of the resulting heterojunction photocatalysts in degrading organic dyes. Experimental results established an optimal molar ratio for KBr to CTAB of 5:1. Benefiting from a remarkable porous structure and tight coupling between porous g-C₃N₄ and BiOBr, the optimal BiOBr-g-C₃N₄(2%) exhibited enhanced visible light absorption capability and promoted the separation of photoinduced carriers. Total removal efficiency for rhodamine B (RhB, 25.0 mL, 20.0 mg L^-1) reached 87% within 30 min in the presence of BiOBr-g-C₃N₄(2%) (20.0 mg) (i.e., 1.51 μmol (g_{photocatalyst} min)^-1), which is superior to the performance of BiOBr (72%) (i.e., 1.25 μmol (g_{photocatalyst} min)^-1), g-C₃N₄ (21%) (i.e., 0.37 μmol (g_{photocatalyst} min)^-1). Furthermore, the photocatalytic reaction rate constant over the optimal heterojunction was 0.034 min^-1, which is significantly larger than those of porous g-C3N4 (0.003 min^-1) and BiOBr (0.015 min^-1). Moreover, this type II heterojunction showed good universality for other organic dyes (such as methyl violet, methylene blue, and crystal violet), highlighting a promising potential role in the elimination of environmental pollutants.

One-Dimensional P-Doped Graphitic Carbon Nitride Tube: Facile Synthesis, Effect of Doping Concentration, and Enhanced Mechanism for Photocatalytic Hydrogen Evolution

P-doped graphitic carbon nitride tubes (P-CNTS) with different P concentrations were successfully fabricated via a pre-hydrothermal in combination with a calcination process under a nitrogen atmosphere. The as-prepared samples exhibited excellent photocatalytic performance with a hydrogen production rate (HPR) of 2749.3 μmol g-1 h-1, which was 17.5 and 6.6 times higher than that of the bulk graphitic carbon nitride (CNB) and graphitic carbon nitride tube (CNT). The structural and textural properties of the P-CNT samples were well-investigated via a series of characterization methods. Compared with the bulk g-C3N4, the tubular structure of the doped samples was provided with a larger specific surface area (SSA) and a relatively rough interior. Besides the above, surface defects were formed due to the doping, which could act as more active sites for the hydrogen production reaction. In addition, the introduction of the P element could effectively adjust the band-gap, strengthen the harvest of visible-light, and boost the effective separation of photogenerated charges. More interestingly, these findings can open up a novel prospect for the enhancement of the photocatalytic performance of the modified g-C3N4.

Photocatalytic degradation of lignin by low content g-C3N4 modified TiO2 under visible light

TiO2/g-C3N4 photocatalysts efficiently degraded lignin to obtain small molecule aromatics, which facilitated the efficient utilization of biomass.

Collaborative enhancement in charge separation and photon harvesting of 2D/2D heterojunction photocatalyst by horizontal loading of SnS2 nanosheets on g-CN films

Highly efficient photocatalysts based on Van der Waals 2D type of heterojunction were fabricated by horizontal loading of ultrathin hexagonal SnS2 nanosheets on the surface of g-CN film via spin...