Aging effects on airflow distribution and micron-particle transport and deposition in a human lung using CFD-DPM approach

Optimal Treatment of Tumor in Upper Human Respiratory Tract Using Microaerosols

Lung cancer is a frequently diagnosed respiratory disease caused by particulate matter in the environment, especially among older individuals. For its effective treatment, a promising approach involves administering drug particles through the inhalation route. Multiple studies have investigated the flow behavior of inhaled particles in the respiratory airways of healthy patients. However, the existing literature lacks studies on the precise understanding of the transportation and deposition (TD) of inhaled particles through age-specific, unhealthy respiratory tracts containing a tumor, which can potentially optimize lung cancer treatment. This study aims to investigate the TD of inhaled drug particles within a tumorous, age-specific human respiratory tract. The computational model reports that drug particles within the size range of 5-10 μm are inclined to deposit more on the tumor located in the upper airways of a 70-year-old lung. Conversely, for individuals aged 50 and 60 years, an optimal particle size range for achieving the highest degree of particle deposition onto upper airway tumor falls within the 11-20 μm range. Flow disturbances are found to be at a maximum in the airway downstream of the tumor. Additionally, the impact of varying inhalation flow rates on particle TD is examined. The obtained patterns of airflow distribution and deposition efficiency on the tumor wall for different ages and tumor locations in the upper tracheobronchial airways would be beneficial for developing an efficient and targeted drug delivery system.

The impact of actuator nozzle and surroundings condition on drug delivery using pressurized-metered dose inhalers

The most commonly used method to deliver aerosolized drugs to the lung is with pressurized metered-dose inhalers (pMDIs). The spray actuator is a critical component of pMDI, since it controls the atomization process by forming aerosol plumes and determining droplet size distribution. Through computational fluid dynamics (CFD) simulations, this study investigated the effect of two different nozzle types (single conventional and twin nozzles) on drug deposition in the mouth-throat (MT) region. We also studied the behavior of aerosol plumes in both an open-air environment and the MT geometry. Our study revealed that spray aerosol generated in an unconfined, open-air environment with no airflow behaves distinctly from spray introduced into the MT geometry in the presence of airflow. In addition, the actuator structure significantly impacts the device's efficacy. In the real MT model, we found that the twin nozzle increases drug deposition in the MT region, and its higher aerosol velocity negatively affects its efficiency.

Non-spherical drug particle deposition in human airway using computational fluid dynamics and discrete element method

Currently, the air pollution and the respiratory disease problems that affect human health are increasing rapidly. Hence, there is attention for trend prediction of the located deposition of inhaled particles. In this study, Weibel's based human airway model (G0-G5) was employed. The computational fluid dynamics and discrete element method (CFD-DEM) simulation was successfully validated by comparison to the previous research studies. The CFD-DEM achieves a better balance between numerical accuracy and computational requirement when comparing with the other methods. Then, the model was used to analyze the non-spherical drug transport with different drug particle sizes, shapes, density, and concentrations. The results found that all the studied factors affected the drug deposition and particle out-mass percentage except the drug concentration. The drug deposition was increased with the increasing of particle size and particle density due to the influence of particle inertia. The Tomahawk-shaped drug deposited easier than the cylindrical drug shape because of the different drag behavior. For the effect of airway geometries, G0 was the maximum deposited zone and G3 was the minimum deposited zone. The boundary layer was found around bifurcation due to the shear force at the wall. Finally, the knowledge can give an essential recommendation for curing patients with pharmaceutical aerosol. The design suggestion of a proper drug delivery device can be summarized.

Airborne microplastics detected in the lungs of wild birds in Japan

Microplastics (MPs) have been found in a wide range of animal species including humans. The detection of MPs in human lungs suggests that humans inhale airborne microplastics (AMPs). Although birds respire more efficiently than mammals and are therefore more susceptible to air pollution, little is known about their inhalation exposure to MPs. In this study, we analyzed samples isolated from the lungs of several species of wild birds in Japan by attenuated total reflection (ATR) imaging method of micro-Fourier transform infrared (μFTIR) spectroscopy to clear whether AMPs can be inhaled and accumulate within the lungs of wild birds. To isolate MPs from lung samples of rock doves (Columba livia), black kites (Milvus migrans), and barn swallows (Hirundo rustica) euthanized for pest control, digestion and density separation were performed. After each sample collected on an alumina filter was measured by ATR imaging method using μFTIR spectroscopy, the physical and chemical characteristics of the detected MPs were evaluated. Six MPs were detected in 3 of 22 lung samples. Polypropylene and polyethylene were found in rock doves and ethylene vinyl acetate was found in a barn swallow. Most MPs were fragments of 28.0-70.5 μm. Our results demonstrated that in addition to dietary sources, some wild birds are exposed to MPs by inhalation, and these MPs reach the lungs.

Nanoparticle transport and deposition in a heterogeneous human lung airway tree: An efficient one path model for CFD simulations

Understanding nano-particle inhalation in human lung airways helps targeted drug delivery for treating lung diseases. A wide range of numerical models have been developed to analyse nano-particle transport and deposition (TD) in different parts of airways. However, a precise understanding of nano-particle TD in large-scale airways is still unavailable in the literature. This study developed an efficient one-path numerical model for simulating nano-particle TD in large-scale lung airway models. This first-ever one-path numerical approach simulates airflow and nano-particle TD in generations 0-11 of the human lung, accounting for 93% of the whole airway length. The one-path model enables the simulation of particle TD in many generations of airways with an affordable time. The particle TD of 5 nm, 10 nm and 20 nm particles is simulated at inhalation flow rates for two different physical activities: resting and moderate activity. It is found that particle deposition efficiency of 5 nm particles is 28.94% higher than 20 nm particles because of the higher dispersion capacity. It is further proved that the diffusion mechanism dominates the particle TD in generations 0-11. The deposition efficiency decreases with the increase of generation number irrespective of the flow rate and particle size. The effects of the particle size and flow rate on the escaping rate of each generation are opposite to the corresponding effects on the deposition rate. The quantified deposition and escaping rates at generations 0-11 provide valuable guidelines for drug delivery in human lungs.

Heat Wave and Bushfire Meteorology in New South Wales, Australia: Air Quality and Health Impacts

The depletion of air quality is a major problem that is faced around the globe. In Australia, the pollutants emitted by bushfires play an important role in making the air polluted. These pollutants in the air result in many adverse impacts on the environment. This paper analysed the air pollution from the bushfires from November 2019 to July 2020 and identified how it affects the human respiratory system. The bush fires burnt over 13 million hectares, destroying over 2400 buildings. While these immediate effects were devastating, the long-term effects were just as devastating, with air pollution causing thousands of people to be admitted to hospitals and emergency departments because of respiratory complications. The pollutant that caused most of the health effects throughout Australia was Particulate Matter (PM) PM_2.5 and PM₁₀. Data collection and analysis were covered in this paper to illustrate where and when PM_2.5 and PM_10, and other pollutants were at their most concerning levels. Susceptible areas were identified by analysing environmental factors such as temperature and wind speed. The study identified how these pollutants in the air vary from region to region in the same time interval. This study also focused on how these pollutant distributions vary according to the temperature, which helps to determine the relationship between the heatwave and air quality. A computational model for PM_2.5 aerosol transport to the realistic airways was also developed to understand the bushfire exhaust aerosol transport and deposition in airways. This study would improve the knowledge of the heat wave and bushfire meteorology and corresponding respiratory health impacts.

How Nanoparticle Aerosols Transport through Multi-Stenosis Sections of Upper Airways: A CFD-DPM Modelling

Airway stenosis is a global respiratory health problem that is caused by airway injury, endotracheal intubation, malignant tumor, lung aging, or autoimmune diseases. A precise understanding of the airflow dynamics and pharmaceutical aerosol transport through the multi-stenosis airways is vital for targeted drug delivery, and is missing from the literature. The object of this study primarily relates to behaviors and nanoparticle transport through the multi-stenosis sections of the trachea and upper airways. The combination of a CT-based mouth–throat model and Weibel’s model was adopted in the ANSYS FLUENT solver for the numerical simulation of the Euler–Lagrange (E-L) method. Comprehensive grid refinement and validation were performed. The results from this study indicated that, for all flow rates, a higher velocity was usually found in the stenosis section. The maximum velocity was found in the stenosis section having a 75% reduction, followed by the stenosis section having a 50% reduction. Increasing flow rate resulted in higher wall shear stress, especially in stenosis sections. The highest pressure was found in the mouth–throat section for all flow rates. The lowest pressure was usually found in stenosis sections, especially in the third generation. Particle escape rate was dependent on flow rate and inversely dependent on particle size. The overall deposition efficiency was observed to be significantly higher in the mouth–throat and stenosis sections compared to other areas. However, this was proven to be only the case for a particle size of 1 nm. Moreover, smaller nanoparticles were usually trapped in the mouth–throat section, whereas larger nanoparticle sizes escaped through the lower airways from the left side of the lung; this accounted for approximately 50% of the total injected particles, and 36% escaped from the right side. The findings of this study can improve the comprehensive understanding of airflow patterns and nanoparticle deposition. This would be beneficial in work with polydisperse particle deposition for treatment of comprehensive stenosis with specific drugs under various disease conditions.

The effect of inlet flow profile and nozzle diameter on drug delivery to the maxillary sinus

In this paper, the effect of the turbulence and swirling of the inlet flow and the diameter of the nozzle on the flow characteristics and the particles' transport/deposition patterns in a realistic combination of the nasal cavity (NC) and the maxillary sinus (MS) were examined. A computational fluid dynamics (CFD) model was developed in ANSYS® Fluent using a hybrid Reynolds averaged Navier–Stokes–large-eddy simulation algorithm. For the validation of the CFD model, the pressure distribution in the NC was compared with the experimental data available in the literature. An Eulerian–Lagrangian approach was employed for the prediction of the particle trajectories using a discrete phase model. Different inlet flow conditions were investigated, with turbulence intensities of 0.15 and 0.3, and swirl numbers of 0.6 and 0.9 applied to the inlet flow at a flow rate of 7 L/min. Monodispersed particles with a diameter of 5 µm were released into the nostril for various nozzle diameters. The results demonstrate that the nasal valve plays a key role in nasal resistance, which damps the turbulence and swirl intensities of the inlet flow. Moreover, it was found that the effect of turbulence at the inlet of the NC on drug delivery to the MS is negligible. It was also demonstrated that increasing the flow swirl at the inlet and decreasing the nozzle diameter improves the total particle deposition more than threefold due to the generation of the centrifugal force, which acts on the particles in the nostril and vestibule. The results also suggest that the drug delivery efficiency to the MS can be increased by using a swirling flow with a moderate swirl number of 0.6. It was found that decreasing the nozzle diameter can increase drug delivery to the proximity of the ostium in the middle meatus by more than 45%, which subsequently increases the drug delivery to the MS. The results can help engineers design a nebulizer to improve the efficiency of drug delivery to the maxillary sinuses.

Aerosol Particle Transport and Deposition in Upper and Lower Airways of Infant, Child and Adult Human Lungs

Understanding transportation and deposition (TD) of aerosol particles in the human respiratory system can help clinical treatment of lung diseases using medicines. The lung airway diameters and the breathing capacity of human lungs normally increase with age until the age of 30. Many studies have analyzed the particle TD in the human lung airways. However, the knowledge of the nanoparticle TD in airways of infants and children with varying inhalation flow rates is still limited in the literature. This study investigates nanoparticle (5 nm ≤ dp ≤ 500 nm) TD in the lungs of infants, children, and adults. The inhalation air flow rates corresponding to three ages are considered as Qin=3.22 L/min (infant), 8.09 L/min (Child), and Qin=14 L/min (adult). It is found that less particles are deposited in upper lung airways (G0–G3) than in lower airways (G12–G15) in the lungs of all the three age groups. The results suggest that the particle deposition efficiency in lung airways increases with the decrease of particle size due to the Brownian diffusion mechanism. About 3% of 500 nm particles are deposited in airways G12–G15 for the three age groups. As the particle size is decreased to 5 nm, the deposition rate in G12–G15 is increased to over 95%. The present findings can help medical therapy by individually simulating the distribution of drug-aerosol for the patient-specific lung.