The methods of determination of critical micellar concentrations of the amphiphilic systems in aqueous medium

The interaction between formylphenoxyacetic acid derivatives (chalcone and flavones) and ionic surfactants: Insights into binding constants, solubilisation and physiochemical properties

In this study, UV-vis spectroscopy was employed to investigate the interaction between formylphenoxyacetic acid (FPAA) and its derivatives (chalcone and flavones) with ionic surfactants (SDS, CTAB, and DTAB) in different physiological environments. Changes in the physiochemical properties of FPAA chalcone and flavones including binding constants, partitioning constants, and Gibbs free energy were observed which were influenced by the presence of ionic surfactants computed using mathematical models. The solubilization of the targeted compounds in the ionic surfactants was determined through the binding constant (Kb). The results of the present study indicated that electrostatic interactions played a significant role in the solubilization of the targeted compounds in SDS, CTAB, and DTAB. At pH 4.1, FPAA chalcone exhibited stronger binding affinity with SDS compared to CTAB and DTAB. However, at pH 7.4, chalcone showed stronger binding with DTAB compared to SDS, while negligible interaction with CTAB was observed at pH 7.4. The flavones demonstrated stronger binding with DTAB at pH 7.4 compared to SDS and CTAB and it exhibited strong bonding with CTAB at pH 4.1. The negative values of the Gibbs free energy for binding (ΔGb˚) and partitioning (ΔGp˚) constants displayed the spontaneity of the process. However, FPAA chalcone with SDS and FPAA flavones with DTAB furnished positive ΔGb˚, indicating a non-spontaneous process.

Design of High-Payload Ascorbyl Palmitate Nanosuspensions for Enhanced Skin Delivery

A high-payload ascorbyl palmitate (AP) nanosuspension (NS) was designed to improve skin delivery following topical application. The AP-loaded NS systems were prepared using the bead-milling technique, and softly thickened into NS-loaded gel (NS-G) using hydrophilic polymers. The optimized NS-G system consisted of up to 75 mg/mL of AP, 0.5% w/v of polyoxyl-40 hydrogenated castor oil (Kolliphor® RH40) as the suspending agent, and 1.0% w/v of sodium carboxymethyl cellulose (Na.CMC 700 K) as the thickening agent, in citrate buffer (pH 4.5). The NS-G system was embodied as follows: long and flaky nanocrystals, 493.2 nm in size, -48.7 mV in zeta potential, and 2.3 cP of viscosity with a shear rate of 100 s-1. Both NS and NS-G provided rapid dissolution of the poorly water-soluble antioxidant, which was comparable to that of the microemulsion gel (ME-G) containing AP in solubilized form. In an ex vivo skin absorption study using the Franz diffusion cell mounted on porcine skin, NS-G exhibited faster absorption in skin, providing approximately 4, 3, and 1.4 times larger accumulation than that of ME-G at 3, 6, and 12 h, respectively. Therefore, the high-payload NS makes it a promising platform for skin delivery of the lipid derivative of ascorbic acid.

Physicochemical parameters and modes of interaction associated with the micelle formation of a mixture of tetradecyltrimethylammonium bromide and cefixime trihydrate: effects of hydrotropes and temperature

The interaction between an antibiotic drug (cefixime trihydrate (CMT)) and a cationic surfactant (tetradecyltrimethylammonium bromide (TTAB)) was examined in the presence of both ionic and non-ionic hydrotropes (HTs) over the temperature range of 300.55 to 320.55 K. The values of the critical micelle concentration (CMC) of the TTAB + CMT mixture were experienced to have dwindled with an enhancement of the concentrations of resorcinol (ReSC), sodium benzoate (NaBz), sodium salicylate (NaS), while for the same system, a monotonically augmentation of CMC was observed in aq. 4-aminobenzoic acid (PABA) solution. A gradual increase in CMC, as a function of temperature, was also observed. The values of the degree of counterion binding (β) for the TTAB + CMT mixture were experienced to be influenced by the concentrations of ReSC/NaBz/NaS/PABA and a change in temperature. The micellization process of TTAB + CMT was observed to be spontaneous (negative standard Gibbs free energy change (ΔG0m)) at all conditions studied. Also, the values of standard enthalpy change (ΔH0m) and entropy change (ΔS0m) were found negative and positive, respectively (with a few exceptions), for the test cases indicating an exothermic and enthalpy-entropy directed micellization process. The recommended interaction forces between the components in the micellar system are electrostatic and hydrophobic interactions. In this study, the values of ΔC0m were negative in aqueous NaBz, ReSC, and PABA media, and positive in case of NaS. An excellent compensation scenario between the enthalpy and entropy for the CMT + TTAB mixed system in the investigated HTs solutions is well defined in the current work.

Modeling interfacial tension of surfactant-hydrocarbon systems using robust tree-based machine learning algorithms

Interfacial tension (IFT) between surfactants and hydrocarbon is one of the important parameters in petroleum engineering to have a successful enhanced oil recovery (EOR) operation. Measuring IFT in the laboratory is time-consuming and costly. Since, the accurate estimation of IFT is of paramount significance, modeling with advanced intelligent techniques has been used as a proper alternative in recent years. In this study, the IFT values between surfactants and hydrocarbon were predicted using tree-based machine learning algorithms. Decision tree (DT), extra trees (ET), and gradient boosted regression trees (GBRT) were used to predict this parameter. For this purpose, 390 experimental data collected from previous studies were used to implement intelligent models. Temperature, normal alkane molecular weight, surfactant concentration, hydrophilic-lipophilic balance (HLB), and phase inversion temperature (PIT) were selected as inputs of models and independent variables. Also, the IFT between the surfactant solution and normal alkanes was selected as the output of the models and the dependent variable. Moreover, the implemented models were evaluated using statistical analyses and applied graphical methods. The results showed that DT, ET, and GBRT could predict the data with average absolute relative error values of 4.12%, 3.52%, and 2.71%, respectively. The R-squared of all implementation models is higher than 0.98, and for the best model, GBRT, it is 0.9939. Furthermore, sensitivity analysis using the Pearson approach was utilized to detect correlation coefficients of the input parameters. Based on this technique, the results of sensitivity analysis demonstrated that PIT, surfactant concentration, and HLB had the greatest effect on IFT, respectively. Finally, GBRT was statistically credited by the Leverage approach.

Magnetic and mesoporous molecularly imprinted polymer synthesized by rational computation design: Sample preparation and analysis of ractopamine

Through density functional theory calculations was studied theoretically the formation process of a magnetic and mesoporous molecularly imprinted polymer for ractopamine (RAC), evaluating the molecular electrostatic potential map, functional monomers, functional monomer / template stoichiometry and crosslink agents. The results revealed that the best conditions for the synthesis were established with acrylic acid as functional monomer in a 1: 4 stoichiometry using acetonitrile as the solvent and ethylene glycol dimethacrylate as crosslink agent. It was observed that nine hydrogen bonds established between the RAC and acrylic acid play a key role on the pre-polymerization complex. In addition, three analytical methods using HPLC, UHPLC and CE instruments were optimized for rapid analysis. The adsorbent was experimentally synthesized considering the best conditions found at the molecular level and characterized by FTIR, DRX, TGA, SEM, TEM, surface analysis, and wettability. After that, the synthesized material was used in magnetic solid phase extraction combined with capillary electrophoresis in a preliminary RAC recovery study from milk samples. Finally, greenness metric with a score of 0.55 have been obtained for the sample preparation procedure using the online AGREEprep metric.

Glycyrrhetinic acid-cyclodextrin grafted pullulan nanoparticles loaded doxorubicin as a liver targeted delivery carrier

In this work, glycyrrhetinic acid (GA)-β-cyclodextrin grafted pullulan (GCDPu) was synthesized and used to form nanoparticles for liver-specific drug delivery. GCDPu was characterized by Fourier transform infrared (FT-IR) and proton nuclear magnetic resonance (¹H NMR). The self-aggregated nanoparticles (GCDPu NPs) with a spherical dimension of about 200 nm were prepared and analyzed by dynamic light scattering (DLS), zeta potential, and transmission electron microscopy (TEM). Doxorubicin (DOX) was selected as an anti-cancer model drug, and the drug-loaded GCDPu NPs were prepared by the emulsion solvent evaporation method. Moreover, the drug encapsulation efficiency (LE%) and loading content (LC%) were determined. Slow DOX release from DOX/GCDPu NPs was confirmed. GCDPu NPs were cytocompatible with Bel-7404 cells and showed high cellular uptake according to the MTT assay, confocal laser scanning microscope (CLSM) and flow cytometry (FCM) results. Compared with free DOX, DOX/GCDPu NPs have exhibited a longer half-life time (t_1/2) and a larger area-under-the-curve (AUC). GCDPu NPs significantly increased DOX contents in the liver and decreased in heart and kidney. Furthermore, DOX/GCDPu NPs exhibited a better anticancer therapeutic effect on tumor-bearing mice. These findings suggest that GCDPu can serve a liver-specific drug delivery system.

A Review of Polymeric Micelles and Their Applications

Self-assembly of amphiphilic polymers with hydrophilic and hydrophobic units results in micelles (polymeric nanoparticles), where polymer concentrations are above critical micelle concentrations (CMCs). Recently, micelles with metal nanoparticles (MNPs) have been utilized in many bio-applications because of their excellent biocompatibility, pharmacokinetics, adhesion to biosurfaces, targetability, and longevity. The size of the micelles is in the range of 10 to 100 nm, and different shapes of micelles have been developed for applications. Micelles have been focused recently on bio-applications because of their unique properties, size, shape, and biocompatibility, which enhance drug loading and target release in a controlled manner. This review focused on how CMC has been calculated using various techniques. Further, micelle importance is explained briefly, different types and shapes of micelles are discussed, and further extensions for the application of micelles are addressed. In the summary and outlook, points that need focus in future research on micelles are discussed. This will help researchers in the development of micelles for different applications.

Direct evidence of the impact of aqueous self-assembly on biological behavior of amphiphilic molecules: The case study of molecular immunomodulators Sulfavants

Sulfavant A and Sulfavant R, sulfoquinovoside-glycerol lipids under study as vaccine adjuvants, structurally differ only for the configuration of glyceridic carbon, R/S and R respectively. The in vitro activity of these substances follows a bell-shaped dose-response curve, but Sulfavant A gave the best response around 20 µM, while Sulfavant R at 10 nM. Characterization of aqueous self-assembly of these molecules by a multi-technique approach clarified the divergent and controversial biological outcome. Supramolecular structures were present at concentrations much lower than critical aggregation concentration for both products. The kind and size of these aggregates varied as a function of the concentration differently for Sulfavant A and Sulfavant R. At nanomolar range, Sulfavant A formed cohesive vesicles, while Sulfavant R arranged in spherical micellar particles whose reduced stability was probably responsible for an increase of monomer concentration in accordance with immunomodulatory profile. Instead, at micromolar concentrations transition from micellar to vesicular state of Sulfavant R occurred and thermodynamic stability of the aggregates, assessed by surface tensiometry, correlated with the bioactivity of Sulfavant A at 20 µM and the complete loss of efficacy of Sulfavant R. The study of Sulfavants provides clear evidence of how self-aggregation, often neglected, and the equilibria between monomers and aqueous supramolecular forms of lipophilic molecules deeply determine the overall bio-response.

A unique amphiphilic triblock copolymer, nontoxic to human blood and potential supramolecular drug delivery system for dexamethasone

The drug delivery system (DDS) often causes toxicity, triggering undesired cellular injuries. Thus, developing supramolecules used as DDS with tunable self-assembly and nontoxic behavior is highly desired. To address this, we aimed to develop a tunable amphiphilic ABA-type triblock copolymer that is nontoxic to human blood cells but also capable of self-assembling, binding and releasing the clinically used drug dexamethasone. We synthesized an ABA-type amphiphilic triblock copolymer (P2L) by incorporating tetra(aniline) TANI as a hydrophobic and redox active segment along with monomethoxy end-capped polyethylene glycol (mPEG2k; Mw = 2000 g mol-1) as biocompatible, flexible and hydrophilic part. Cell cytotoxicity was measured in whole human blood in vitro and lung cancer cells. Polymer-drug interactions were investigated by UV-Vis spectroscopy and computational analysis. Our synthesized copolymer P2L exhibited tuned self-assembly behavior with and without external stimuli and showed no toxicity in human blood samples. Computational analysis showed that P2L can encapsulate the clinically used drug dexamethasone and that drug uptake or release can also be triggered under oxidation or low pH conditions. In conclusion, copolymer P2L is nontoxic to human blood cells with the potential to carry and release anticancer/anti-inflammatory drug dexamethasone. These findings may open up further investigations into implantable drug delivery systems/devices with precise drug administration and controlled release at specific locations.

Nanoengineering Branched Star Polymer-Based Formulations: Scope, Strategies, and Advances

Soft nanoparticles continue to offer a promising platform for the encapsulation and controlled delivery of poorly water-soluble drugs and help enhance their bioavailability at targeted sites. Linear amphiphilic block copolymers are the most extensively investigated in formulating delivery vehicles. However, more recently, there has been increasing interest in utilizing branched macromolecules for nanomedicine, as these have been shown to lower critical micelle concentrations, form particles of smaller dimensions, facilitate the inclusion of varied compositions and function-based entities, as well as provide prolonged and sustained release of cargo. In this review, it is aimed to discuss some of the key variables that are studied in tailoring branched architecture-based assemblies, and their influence on drug loading and delivery. By understanding structure-property relationships in these formulations, one can better design branched star polymers with suitable characteristics for efficient therapeutic interventions. The role played by polymer composition, chain architecture, crosslinking, stereocomplexation, compatibility between polymers and drugs, drug/polymer concentrations, and self-assembly methods in their performance as nanocarriers is highlighted.

Synthesis and self-assembly of curcumin-modified amphiphilic polymeric micelles with antibacterial activity

BACKGROUND

The ubiquitous nature of bacterial biofilms combined with the enhanced resistance towards antimicrobials has led to the development of an increasing number of strategies for biofilm eradication. Such strategies must take into account the existence of extracellular polymeric substances, which obstruct the diffusion of antibiofilm agents and assists in the maintenance of a well-defended microbial community. Within this context, nanoparticles have been studied for their drug delivery efficacy and easily customised surface. Nevertheless, there usually is a requirement for nanocarriers to be used in association with an antimicrobial agent; the intrinsically antimicrobial nanoparticles are most often made of metals or metal oxides, which is not ideal from ecological and biomedical perspectives. Based on this, the use of polymeric micelles as nanocarriers is appealing as they can be easily prepared using biodegradable organic materials.

RESULTS

In the present work, micelles comprised of poly(lactic-co-glycolic acid) and dextran are prepared and then functionalised with curcumin. The effect of the functionalisation in the micelle's physical properties was elucidated, and the antibacterial and antibiofilm activities were assessed for the prepared polymeric nanoparticles against Pseudomonas spp. cells and biofilms. It was found that the nanoparticles have good penetration into the biofilms, which resulted in enhanced antibacterial activity of the conjugated micelles when compared to free curcumin. Furthermore, the curcumin-functionalised micelles were efficient at disrupting mature biofilms and demonstrated antibacterial activity towards biofilm-embedded cells.

CONCLUSION

Curcumin-functionalised poly(lactic-co-glycolic acid)-dextran micelles are novel nanostructures with an intrinsic antibacterial activity tested against two Pseudomonas spp. strains that have the potential to be further exploited to deliver a secondary bioactive molecule within its core.

The effect of prime-and-rinse approach using MDP micellar solutions on extrafibrillar demineralization and dentin bond performance

OBJECTIVE

This study investigated the effects of prime-and-rinse approach using 10-methacryloyloxydecyl dihydrogen phosphate (MDP) micellar solutions on extrafibrillar demineralization and dentin bond performance of etch-and-rinse adhesive.

METHODS

The micellar solutions were prepared by adding 15% MDP in two ethanol-aqueous (75:25, 55:45 V/V%) solutions, referring to MDP/EtOH₇₅ and MDP/EtOH₅₅. After mid-coronal dentin surfaces were either etched (control) or conditioned with MDP/EtOH₇₅ and MDP/EtOH₅₅ and rinsed, they were applied with adhesive (Adpter Single Bond 2) in dry- or wet-bonding mode and placed with composite resin (Filtek Z350 XT). They were prepared into multiple micro-beams for micro-tensile bond strengths (MTBS) testing after storage in water for 24 h or subjecting to thermocycling. The other pretreated dentin surfaces were analyzed by TF-XRD, ATR-FTIR, HRTEM, FE-SEM, contact angle measurement and nanoindentation testing. The MTBS data was analyzed with two-way ANOVA followed by LSD post-hoc test.

RESULTS

MDP/EtOH₇₅ produced significantly greater MTBS values than MDP/EtOH₅₅ and control after thermocycling aging in dry- or wet-bonding mode (P < 0.05). The ATR-FTIR spectrums shows that ratios of phosphate/monomer (1,034 cm^-1/1,716 cm^-1) on MDP/EtOH₇₅-, MDP/EtOH₅₅-treated dentin surfaces are 0.51 and 0.23, respectively. This is confirmed by HRTEM images and SAED pattern that intrafibrillar minerals were mostly preserved after treatment with MDP/EtOH₇₅. MDP/EtOH₇₅ produced significantly higher elastic modulus and nanohardness on pretreated dentin surface than MDP/EtOH₅₅ (P < 0.05). TF-XRD pattern shows some MDP-Ca salts remained on the primed dentin surface.

SIGNIFICANCE

Prime-and-rinse approach using MDP/EtOH₇₅ micellar solution could produce mostly extrafibrillar demineralization, and greatly increase dentin bond durability in dry- or wet-bonding mode.

Exploiting the unique specialty of hydrazone functionality: Synthesis of a highly sensitive UV-Vis active solvatochromic probe

The unique physico-chemical attributes of the hydrazone functionality have been extensively studied for a diverse range of chemical, biological and analytical applications. The synthesis of a highly sensitive hydrazone based UV-Vis active solvatochromic probe that exhibits excellent sensitivity toward sensing of solvent polarity, microstructural changes and onset of micellization in aqueous systems was carried out. Specifically, synthesis of 2,4-dinitrophenyl-2-(2-nitrobenzylidene)hydrazone (DNPNBH), through an easy to carry, atom economical, one-pot single step approach via use of low-cost precursors viz. ortho-nitrobenzaldehyde and 2,4-dinitrophenyl hydrazine is presented. The UV-Vis absorption features of the synthesized hydrazone exhibit excellent sensitivity toward the polarity of its immediate microenvironment. The microenvironment polarity sensing potential of DNPNBH is demonstrated for some single solvent systems and DMF-Water mixture as a model binary solvent system and the results are supported by quantum mechanical calculations. Use of the DNPNBH as a probe (at concentrations many orders lower than required for conventional probes) to precisely reflect the onset of micellization and estimation of critical micelle concentration (CMC) of amphiphilic molecules (5.25 mM for SDS, 1.53 mM for CTAB and 0.055 mM for Brij56) in aqueous solutions is also demonstrated. The results clearly qualify the synthesized hydrazone as a highly sensitive UV-Vis probe that can be employed for reliable sensing of solvent polarity, composition dependence of physicochemical attributes in mixed solvent systems and the estimation of CMC of surfactant systems via spectrophotometry.

Facile Synthesis of Amphiphilic Fluorescent Phosphorus Dendron-Based Micelles as Antiproliferative Agents: First Investigations

We designed and synthesized several families of novel amphiphilic fluorescent phosphorus dendron-based micelles showing relevant antiproliferative activities for use in the field of theranostic nanomedicine. Based on straightforward synthesis pathways, 12 amphiphilic phosphorus dendrons bearing 10 protonated cyclic amino groups (generation one), or 20 protonated amino groups (generation two), and 1 hydrophobic chain carrying 1 fluorophore moiety were created. The amphiphilic dendron micelles had the capacity to aggregate in solution using hydrophilic/hydrophobic interactions, which promoted the formation of polymeric micelles. These dendron-based micelles showed moderate to high antiproliferative activities against a panel of tumor cell lines. This paper presents for the first time the synthesis and our first investigations of new phosphorus dendron-based micelles for cancer therapy applications.

PI(4,5)P2 Clustering and Its Impact on Biological Functions

Located at the inner leaflet of the plasma membrane (PM), phosphatidyl-inositol 4,5-bisphosphate [PI(4,5)P₂] composes only 1-2 mol% of total PM lipids. With its synthesis and turnover both spatially and temporally regulated, PI(4,5)P₂ recruits and interacts with hundreds of cellular proteins to support a broad spectrum of cellular functions. Several factors contribute to the versatile and dynamic distribution of PI(4,5)P₂ in membranes. Physiological multivalent cations such as Ca²⁺ and Mg²⁺ can bridge between PI(4,5)P₂ headgroups, forming nanoscopic PI(4,5)P₂-cation clusters. The distinct lipid environment surrounding PI(4,5)P₂ affects the degree of PI(4,5)P₂ clustering. In addition, diverse cellular proteins interacting with PI(4,5)P₂ can further regulate PI(4,5)P₂ lateral distribution and accessibility. This review summarizes the current understanding of PI(4,5)P₂ behavior in both cells and model membranes, with emphasis on both multivalent cation- and protein-induced PI(4,5)P₂ clustering. Understanding the nature of spatially separated pools of PI(4,5)P₂ is fundamental to cell biology.

Miktoarm Star Polymers: Branched Architectures in Drug Delivery

Delivering active pharmaceutical agents to disease sites using soft polymeric nanoparticles continues to be a topical area of research. It is becoming increasingly evident that the composition of amphiphilic macromolecules plays a significant role in developing efficient nanoformulations. Branched architectures with asymmetric polymeric arms emanating from a central core junction have provided a pivotal venue to tailor their key parameters. The build-up of miktoarm stars offers vast polymer arm tunability, aiding in the development of macromolecules with adjustable properties, and allows facile inclusion of endogenous stimulus-responsive entities. Miktoarm star-based micelles have been demonstrated to exhibit denser coronae, very low critical micelle concentrations, high drug loading contents, and sustained drug release profiles. With significant advances in chemical methodologies, synthetic articulation of miktoarm polymer architecture, and determination of their structure-property relationships, are now becoming streamlined. This is helping advance their implementation into formulating efficient therapeutic interventions. This review brings into focus the important discoveries in the syntheses of miktoarm stars of varied compositions, their aqueous self-assembly, and contributions their formulations are making in advancing the field of drug delivery.

Photo-initiated rupture of azobenzene micelles to enable the spectroscopic analysis of antimicrobial peptide dynamics

Antimicrobial peptides (AMPs) show promise for the treatment of bacterial infections, but many have undesired hemolytic activities. The AMP MP1 not only has broad spectrum bactericidal activity, but has been shown to have antitumor activity. The interaction between AMPs and cellular membranes gives rise to a peptide's cell-specificity and activity. However, direct analysis of the biophysical interactions between peptides and membrane is complex, in part due to the nature of membrane environments as well as structural changes in the peptide that occurs upon binding to the membrane. In order to investigate the interplay between cell selectivity, activity, and secondary structural changes involved in antimicrobial peptide activity, we sought to implement photolizable membrane mimics to assess the types of information available from infrared spectroscopic measurements that follow from photoinitiated peptide dynamics. Azo-surfactants (APEG) form micelles containing a photolizable azobenzene core, which upon irradiation can induce membrane deformation resulting in breakdown of micelles. Spectroscopic analysis of membrane deformation may provide insights into the physical behavior associated with unfolding and dissociation of antimicrobial peptides within a membrane environment. Herein, we synthesized and characterized two new azo-surfactants, APEGTMG and APEGNEt2MeI. Furthermore, we demonstrate the viability of azosurfactants as membrane mimics by examining both the membrane binding and dissociation induced secondary structural changes of the antimicrobial peptide, MP1.

Ecotoxicity and interacting mechanism of anionic surfactant sodium dodecyl sulfate (SDS) and its mixtures with nonionic surfactant fatty alcohol-polyoxyethlene ether (AEO)

This paper reports the proportion-dependent toxicity of binary surfactant mixtures containing anionic sodium dodecyl sulfate (SDS) and nonionic fatty alcohol-polyoxyethlene ether (AEO) toward Photobacterium phosphoreum. The crucial role of toxicity interactions was elucidated by spectroscopic probing the refolding of the unfolded bovine serum albumin (BSA) induced by SDS and theoretical calculating the interaction parameter of mixed surfactants based on Rubingh's model from the critical micelle concentrations. The SDS/AEO mixtures can be divided into two groups based on the toxicity response to the proportion of AEO in the mixtures: Group I contained low mass proportions of AEO, that is, SDS:AEO = 4:1, 3:1; Group II featured high AEO proportions, that is, SDS:AEO = 3:2, 1:1, 2:3, 1:4. The toxicity of SDS/AEO mixtures decreased with the enhanced proportion of AEO in Group I and then fluctuated slightly when the AEO proportion increased to that of Group II. The mixture with the mass ratio of 1:1 showed a slightly higher toxicity than the others in Group II. Scanning electron microscopy (SEM) images illustrated that the addition of AEO hindered the action of SDS against the cell membrane. Fluorescence measurement indicated that AEO could extract SDS molecules embedded in the BSA matrix, except for those bound to the highly active sites of BSA, and refold stepwise the unfolded protein. The results were in excellent analogy to the proportion-dependent toxicity of SDS/AEO mixture, indicating the formation of mixed micelles playing a key role. The interaction parameter further revealed that antagonism led to the mixture with equal mass ratio (1:1) showing higher toxicity than other mass ratios in Group II. These results can be useful for compounding SDS/AEO mixtures in application efficiently and eco-friendly.

Quantum Chemical and Electrochemical Evaluation of Alkyl Phosphine Oxide in Corrosion Inhibition of Carbon Steel in Formation Water

In this study, quantum chemical calculations and molecular dynamics simulations studies of a series of five nonionic surfactants namely: dimethyl alkyl phosphine oxide surfactants (C10-18PO) containing decyl, dodecyl-, tetradecyl-, hexadecyl-, and octadecyl alkyl chains were implemented using the density functional theory (DFT) method to interpret the correlation between the inhibition efficiency and the molecular structure of the different inhibitors in formation water. The global quantities including: highest occupied molecular orbital energy (HOMO), lowest unoccupied molecular orbital energy (LUMO), energy gap (ΔE), dipole moment (μ), total energy (TE), ionization potential (I), electron affinity (A), electronegativity (χ), chemical potential (π), global hardness (η), global softness (σ), global electrophilicity (ω), polarizabilities <α> and fraction of electrons transferred (ΔN) were calculated for the different inhibitors in formation water. The dependence of surface activities of the nonionic surfactants on the alkyl chain length was studied in distilled water. The surface activities and surface parameters of the studied surfactants were described using: surface tension and interfacial tension measurements. The determined surface parameters of the studied surfactants were surface tension, critical micelle concentration, effectiveness, efficiency, maximum surface excess and minimum surface area at 25 °C. The thermodynamic evaluation of the surfactants was performed by calculating the standard free energies of micellization and adsorption. The structure-corrosion inhibition performance was estimated using potentiodynamic polarization, electrochemical impedance measurements and quantum chemical studies at 25 °C in true sample formation water.

On the Thermodynamics of Micellizationof Oppositely Charged Surfactants in the Presence of Organic Additives in the Aqueous Medium

To investigate the effect of additives urea and thiourea, on the micellization behavior of sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB), detailed conductance measurements were carried out in aqueous media at different temperatures. The critical micelle concentration (CMC), determined from the discontinuity in the plots of molar conductance versus square root of concentration, indicated an inhibitory effect of urea and thiourea on micelle forming ability of the surfactants SDS and CTAB in the range of composition studied. The demicellizing effect of urea has been found to be more pronounced in SDS than CTAB. These observations are further augmented by the evaluation of thermodynamic parameters of micellization. A negative change in enthalpy of micellization ( Δ H m ∘ $\Delta{\text{H}}_{\text{m}}^{\circ}$ ) indicates a strong interaction between water and the additives and a positive change observed in entropy of micellization ( Δ S m ∘ $\Delta{\text{S}}_{\text{m}}^{\circ}$ ) manifest, that the micellization is an entropy-driven process. Further Δ H m ∘ $\Delta{\text{H}}_{\text{m}}^{\circ}$ and Δ S m ∘ $\Delta{\text{S}}_{\text{m}}^{\circ}$ change in mutually compensating manner, so that Δ G m ∘ < 0 $\Delta{\text{G}}_{\text{m}}^{\circ} < 0$ is not significantly affected. Finally, the counterion binding values (β) obtained for SDS and CTAB remain practically constant from 0.6 to 0.8 between 25 °C and 45 °C indicate that the size and shape of micelle remain essentially constant. Moreover, the increase in Δ G II ∘ $\Delta{\text{G}}_{{\text{II}}}^{\circ}$ values, which represent the effect of co-solvent or additive on micellization, substantiates the above observations. Many early works has investigated the micellization behavior of surfactants using a fixed additive composition. However, in this study, variable aqueous compositions of urea (0.30–1.78 wt%) and thiourea (0.24–1.41 wt%) have been considered.

Fabrication of redox-responsive Bi(mPEG-PLGA)-Se2 micelles for doxorubicin delivery

Stimuli-responsive polymeric nanostructures have emerged as potential drug carriers for cancer therapy. Herein, we synthesized redox-responsive diselenide bond containing amphiphilic polymer, Bi(mPEG-PLGA)-Se₂ from mPEG-PLGA and 3,3'-diselanediyldipropanoic acid (DSeDPA) using DCC/DMAP as coupling agents. Due to its amphiphilic nature, Bi(mPEG-PLGA)-Se₂ self-assembled in to stable micelles in aqueous solution with a hydrodynamic size of 123.9 ± 0.85 nm. The Bi(mPEG-PLGA)-Se₂ micelles exhibited DOX-loading content (DLC) of 6.61 wt% and encapsulation efficiency (EE) of 54.9%. The DOX-loaded Bi(mPEG-PLGA)-Se₂ micelles released 73.94% and 69.54% of their cargo within 72 h upon treatment with 6 mM GSH and 0.1% H₂O₂, respectively, at pH 7.4 and 37 °C. The MTT assay results demonstrated that Bi(mPEG-PLGA)-Se₂ was devoid of any inherent toxicity and the DOX-loaded micelles showed pronounced antitumor activities against HeLa cells, 44.46% of cells were viable at maximum dose of 7.5 µg/mL. The cellular uptake experiment further confirmed the internalization of DOX-loaded Bi(mPEG-PLGA)-Se₂ micelles and endowed redox stimuli triggered drug release in cytosol and nuclei of cancer cells. Overall, the results suggested that the smart, biocompatible Bi(mPEG-PLGA)-Se₂ copolymer could serve as potential drug delivery biomaterial for the controlled release of hydrophobic drugs in cancer cells.

Study on surface properties of sodiumdodecyl sulfate and dodecyltrimethylammonium bromide mixed surfactants and their interaction with dyes

The antagonistic as well as synergetic interaction for dodecyltrimethylammonium bromide (DTAB) and sodiumdodecyl sulfate (SDS) mixed surfactants by using surface tension are investigated on the basis of the results obtained earlier, the efficiency of adsorption (pC₂₀), aggregation number (N), ΓΓmax, effective Gibbs free energy (ΔGeffo) and CMCC20 are calculated additionally with three different temperatures at T = 293.15, 298.15 and 303.15 K as the detailed surface properties. The binding constants and standard free energy change of SDS and DTAB mixture with the interaction of (2.5× 10⁻⁵ mol L^–1 of methyl orange, MO and methylene blue, MB) are carried out by using UV-Vis spectroscopy at room temperature by using different models. The closer values of the binding constants and standard free energy change for SDS and DTAB mixture with the interaction of MO and MB are included in our investigations.

Adhesion of Marinobacter hydrocarbonoclasticus to Surfactant-Decorated Dodecane Droplets

We investigate the effect of interfacial properties on the adhesion of bacteria at oil/water interfaces using confocal microscopy. Surfactant-decorated dodecane droplets of diameter 20-60 μm are generated using a coflow microfluidic device, introduced into an aqueous saline suspension of Marinobacter hydrocarbonoclasticus bacteria, and imaged in 3-D over time. Using image analysis algorithms, we determine the number of bacteria adhering at oil/water interfaces over time in the presence of dioctyl sodium succinate (DOSS), a component of the dispersant used in oil-spill recovery. The adsorption of bacteria at the oil/water interface follows Langmuir first-order kinetics for all droplet sizes, with the greatest areal number density of bacteria adhered to the smallest droplets. We vary the surfactant type [DOSS, dicyclohexyl sodium sulfosuccinate, dibutyl sodium sulfosuccinate, cetyltrimethylammonium bromide, and Tween 20] and concentration and examine the effects on long-time adhesion of bacteria. For a fixed droplet size, the areal density of bacteria at the interface decreases with increasing surfactant concentration because of a reduction in oil/water interfacial tension that increases the free energy of adhesion of the bacterium.

Influence of Ethylene Oxide Content in Nonionic Surfactant to the Hydrolysis of Reactive Dye in Silicone Non-Aqueous Dyeing System

Silicone reverse dyeing technology provides an important means of saving water and salts-free in the textile dyeing industry. The interactions between dyes and surfactants may influence the hydrolysis of dye during dyeing. In this investigation, the effect of ethylene oxide content in nonionic surfactant on the hydrolytic reaction of reactive dye was firstly investigated in a siloxane reverse emulsion dyeing system. Compared with no surfactants, the hydrolytic reaction of vinyl sulfone reactive dye was a slowdown when some nonionic surfactants were used during dyeing. Usually, the hydrophobic groups in nonionic surfactants were dodecyl chains but their polar head groups were different. The hydrolytic reaction of vinyl sulfone dye showed that the longer of EO (ethylene oxide) chains, the faster the hydrolytic reaction of vinyl sulfone dye. From the absorption spectrum of dye, it could be concluded that more of dyes would be solubilized into the formed micelles, and dye-surfactant complexes were adhered to the surface of micelles if the molecular structure of surfactant had a shorter EO chains. Furthermore, the intramolecular or intermolecular hydrogen bond could be formed between dye and surfactant, which would further influence the hydrolytic reaction of vinyl sulfone dye. However, the solubility of surfactant in siloxane non-aqueous media would decrease with the increase of EO chains. Meanwhile, the dispersion of dye was enhanced as well as the hydrolytic reaction of dye. From this investigation, some surfactant can be used to improve the fixation of reactive dye during dyeing. Furthermore, washing times after dyeing and the ecological problems can be decreased.

Rheology, dynamic light scattering and physicochemical characterization of octenyl succinic anhydride (OSA) modified starch in aqueous solution

Physicochemical and rheological properties of hydrophobically modified starch by octenyl succinic anhydride (OSA) have been evaluated in order to investigate the effects of concentration and temperature on its aggregation phenomenon in an aqueous solution. The analysis of particle size distribution showed the existence of two modes of aggregation by intramolecular bonds, whereas beyond the critical aggregation concentration a second population appears which seems to be induced by the intermolecular interactions. From the rheological analysis of OSA starch solutions, three behaviour classes were observed. The first class presents a non-Newtonian shear-thinning behavior characterized by two Newtonian regions. The second class exhibits a gel like behavior due to the entanglement of the macromolecular chains by intermolecular bonds, where its destructuring makes it possible to find the first morphology of the aggregated macromolecules. The third class exhibits a liquid behavior in a concentrated domain due to the phase separation between the modified and unmodified parts. Otherwise, the thermo-rheological analysis demonstrated indeed the presence of a thermosensitive behavior in tangled solutions of OSA starch.

Nano-delivery systems for encapsulation of dietary polyphenols: An experimental approach for neurodegenerative diseases and brain tumors

Neurodegenerative diseases (NDs) and brain tumors are severe, disabling, and incurable disorders that represent a critical problem regarding human suffering and the economic burden on the healthcare system. Because of the lack of effective therapies to treat NDs and brain tumors, the challenge for physicians is to discover new drugs to improve their patients' quality of life. In addition to risk factors such as genetics and environmental influences, increased cellular oxidative stress has been reported as one of the potential common etiologies in both disorders. Given their antioxidant and anti-inflammatory potential, dietary polyphenols are considered to be one of the most bioactive natural agents in chronic disease prevention and treatment. Despite the protective activity of polyphenols, their inefficient delivery systems and poor bioavailability strongly limit their use in medicine and functional food. A potential solution lies in polymeric nanoparticle-based polyphenol delivery systems that are able to enhance their absorption across the gastrointestinal tract, improve their bioavailability, and transport them to target organs. In the present manuscript, we provide an overview of the primary polyphenols used for ND and brain tumor prevention and treatment by focusing on recent findings, the principal factors limiting their application in clinical practice, and a promising delivery strategy to improve their bioavailability.

Micelle Formation in Alkyl Sulfate Surfactants Using Dissipative Particle Dynamics

We use dissipative particle dynamics (DPD) to study micelle formation in alkyl sulfate surfactants, with alkyl chain lengths ranging from 6 to 12 carbon atoms. We extend our recent DPD force field [ J. Chem. Phys. 2017 , 147 , 094503 ] to include a charged sulfate chemical group and aqueous sodium ions. With this model, we achieve good agreement with the experimentally reported critical micelle concentrations (CMCs) and can match the trend in mean aggregation numbers versus alkyl chain length. We determine the CMC by fitting a charged pseudophase model to the dependence of the free surfactant on the total surfactant concentration above the CMC and compare it with a direct operational definition of the CMC as the point at which half of the surfactant is classed as micellar and half as monomers and submicellar aggregates. We find that the latter provides the best agreement with experimental results. Finally, with the same model, we are able to observe the sphere-to-rod morphological transition for sodium dodecyl sulfate (SDS) micelles and determine that it corresponds to SDS concentrations in the region of 300-500 mM.