Direct esterification of olive-pomace oil using mesoporous silica supported sulfonic acids

Sulfonated Sargassum horneri carbon as solid acid catalyst to produce biodiesel via esterification

A solid acid catalyst prepared by sulfonated Sargassum horneri carbon was utilized for the esterification reaction of oleic acid and methanol. The formed amorphous carbon layers during carbonization and the access of sulfonic acid groups during sulfonation can catalyze the esterification reaction for biodiesel preparation efficiently. The catalyst was characterized by various methods to investigate its physical and chemical properties. With carbonization at 300 °C for 2 h followed by sulfonation at 90 °C for 5 h, the catalyst reached acid density of 1.40 mmol/g. The catalyst dosage, methanol/oleic acid (molar ratio), reaction temperature, and reaction time were optimized to 10 wt%, 15:1, 70 °C, and 3 h, respectively. Under the optimal condition, the conversion of oleic acid reached 96.4%. Additionally, the catalyst was regenerated after four cycles, with the conversion of oleic acid still reaching 95.4%.

Synthesis and characterization of sulfur-containing hybrid materials based on sodium silicate

An original method for the one-stage synthesis of sulfur-containing silica of SBA-15 type is developed and described. Instead of tetraethylorthosilicate (TEOS) typically used as a source of silica, the inexpensive sodium metasilicate has been applied in our method. The mesoporous silica material was first functionalized with thiol groups then oxidized by concentrated nitric acid to produce sulfonic groups. The samples obtained possess developed specific surface area (S_sp = 320–675 m² g⁻¹) and porous structure with an effective pore diameter of 3.5–5.7 nm. The orderliness of the structure and presence of surface sulfur-containing acidic groups of various natures in the synthesized materials were determined using XRD, TEM, N₂ adsorption, conductivity and potentiometric titration methods. Based on the results of the measurements of the zeta potential vs. pH and electrolyte concentration, conclusions about the electro-surface properties and aggregation stability of sample dispersion have been drawn. The obtained samples are environmentally-friendly and could be used in green chemistry.

Hybrid Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> Si(CH₂)₃SH–SBA-15 and Si(CH₂)₃SO₃H–SBA-15 silicas were obtained with developed specific surface area and an effective pore diameter of 3.5–5.7 nm.