Removal of cationic dyes by modified waste biosorbent under continuous model: Competitive adsorption and kinetics

Rhodamine-B dye removal using aliquat-336 modified amberlite XAD-4 resin in fixed-bed columns in series

The present work reports studies on the effective removal of Rhodamine-B (RhB) using Aliquat-336 modified Amberlite XAD-4 resin in the fixed-bed columns in series. The effect of flow rate (Q = 2 to 6 mL·min^-1), bed height (h = 3.5 to 7 cm) and initial RhB dye concentration (C_in = 10 to 20 mg·L^-1) was studied. When a single column was used, 93% RhB dye was removed in 3 h at Q = 2 mL·min^-1, C_in = 10 mg·L^-1, and h = 7 cm. When three columns in series were used, almost 100% dye was removed until 80 h. The maximum breakthrough time (142 h) and saturation time (244 h) were found by keeping Q = 2 mL·min^-1, h = 7 cm of each column and C_in = 10 mg·L^-1. Mathematical modeling of the breakthrough curves was done by using Yoon-Nelson, Clark, Wolborska, and pore diffusion models. The Clark model best fitted the experimental data. The possible interaction mechanism between Aliquat-336 and RhB dye was proposed. The column was regenerated in continuous mode using 1 M HCl solution and maintaining a flow rate of 2 mL·min^-1.

Synthesis of green magnetic biopolymer derived from Oak fruit hull tannin for efficient simultaneous adsorption of a mixture of Malachite Green and Sunset Yellow dyes from aqueous solutions

In the present study, a new bioadsorbent with polyhydroxyphenyl groups was synthesized as a tannin-based magnetic porous organic polymer by using from internal layer of Oak fruit hull (Oak Gal)...

A review on modified sugarcane bagasse biosorbent for removal of dyes

This review provides an important insight on using Sugarcane Bagasse (SB) biosorbent in raw and modified form for removal of dyes from wastewater. Various methods of activation and modification of SB like physical, chemical, biological, composite formation and grafting were explored. Beside this, effect of different optimization conditions like adsorbent dosage, initial dye concentration, pH, temperature and contact time on the adsorption process were studied. Also, regeneration of dye loaded SB, the challenges and perspectives for future researches on waste-derived adsorbents were studied.