Cumulative effect of hydrophobic PLMA and surface epoxide groups in composite polymer particles on adsorption behavior of congo red and direct red-75

The Effect of Modifying Canadian Goldenrod (Solidago canadensis) Biomass with Ammonia and Epichlorohydrin on the Sorption Efficiency of Anionic Dyes from Water Solutions

This study examined the effect of modifying Canadian goldenrod (Solidago canadensis) biomass on its sorption capacity of Reactive Black 5 (RB5) and Reactive Yellow 84 anionic dyes. The scope of the research included the characteristics of sorbents (FTIR, elementary analysis, pH_PZC), the effect of pH on dye sorption efficiency, sorption kinetics, and the maximum sorption capacity (describing the data with Langmuir 1 and 2 and Freundlich models). FTIR analyses showed the appearance of amine functional groups in the materials modified with ammonia water, which is indicative of the sorbent amination process. The amination efficiency was higher in the case of materials pre-activated with epichlorohydrin, which was confirmed by elemental analysis and pH_PZC values. The sorption efficiency of RB5 and RY84 on the tested sorbents was the highest in the pH range of 2-3. The sorption capacity of the goldenrod biomass pre-activated with epichlorohydrin and then aminated with ammonia water was 71.30 mg/g and 59.29 mg/g in the case of RB5 and RY84, respectively, and was higher by 2970% and 2510%, respectively, compared to the unmodified biomass. Amination of biomass pre-activated with epichlorohydrin can increase its sorption capacity, even by several dozen times.

Hierarchical Emulsion-Templated Monoliths (polyHIPEs) as Scaffolds for Covalent Immobilization of P. acidilactici

The immobilized cell fermentation technique (IMCF) has gained immense popularity in recent years due to its capacity to enhance metabolic efficiency, cell stability, and product separation during fermentation. Porous carriers used as cell immobilization facilitate mass transfer and isolate the cells from an adverse external environment, thus accelerating cell growth and metabolism. However, creating a cell-immobilized porous carrier that guarantees both mechanical strength and cell stability remains challenging. Herein, templated by water-in-oil (w/o) high internal phase emulsions (HIPE), we established a tunable open-cell polymeric P(St-co-GMA) monolith as a scaffold for the efficient immobilization of Pediococcus acidilactici (P. acidilactici). The porous framework's mechanical property was substantially improved by incorporating the styrene monomer and cross-linker divinylbenzene (DVB) in the HIPE's external phase, while the epoxy groups on glycidyl methacrylate (GMA) supply anchoring sites for P. acidilactici, securing the immobilization to the inner wall surface of the void. For the fermentation of immobilized P. acidilactici, the polyHIPEs permit efficient mass transfer, which increases along with increased interconnectivity of the monolith, resulting in higher _L-lactic acid yield compared to that of suspended cells with an increase of 17%. The relative _L-lactic acid production is constantly maintained above 92.9% of their initial relative production after 10 cycles, exhibiting both its great cycling stability and the durability of the material structure. Furthermore, the procedure during recycle batch also simplifies downstream separation operations.

Fabrication of Fe3O4@poly(methyl methacrylate-co-glycidyl methacrylate) microspheres via miniemulsion polymerization using porous microspheres as templates for removal of cationic dyes

A novel and simple method was proposed to prepare monodisperse magnetic microspheres with controllable particle sizes and different functionalities.

Modification of epoxy groups of poly(hydroxylmethyl methacrylate-co-glycidyl methacrylate) cryogel with H3PO4 as adsorbent for removal of hazardous pollutants

Poly(hydroxylmethyl methacrylate-co-glycidyl methacrylate) (p(HEMA-GMA)) macroporous cryogel with high density of epoxy groups was synthesized, and the epoxy groups of the cryogel were modified into phosphonate groups. The effects of dye concentrations, adsorption time, pH, salt concentration, and adsorption temperature on the adsorption of Direct Blue-53 (DB-53) and Reactive Blue-160 (RB-160) dyes were studied. The maximum adsorption capacity was found to be 245.3 and 155.8 mg/g (0.255 or 0.119 mmol/g) for the DB-53 and RB-160 dyes, respectively. The higher adsorption capacity achieved for the DB-53 compared with the RB-160 dye can result from the pendant primary amino groups of the DB-53 dye as well as the smaller size of the dye molecule. The Langmuir isotherm model and the pseudo-second-order kinetic model well described the experimental data. The p(HEMA-GMA)-PO₄^2- adsorbent has many operational advantages for the removal of pollutants. It could be a promising adsorbent to be used in industrial wastewater treatment.