Flow injection analysis system with electrochemical detection for the simultaneous determination of nanomolar levels of acetaminophen and codeine

A ratiometric fluorescence probe for bisulfite detection in live cells and meat samples

The development of reliable probe technology for the detection of bisulfite (HSO3-) in situ in food and biological samples is contributing significantly to food quality and safety assurance as well as community health. In this work, a responsive probe, EHDI, is developed for ratiometric fluorescence detection of HSO3- in aqueous solution, meat samples, and living cells. The probe is designed based on the HSO3- triggered 1,4-addition of electron deficit C = C bond of EHDI. As a result of this specific 1,4-addition, the π-conjugation system was destructed, resulting in blue shifts of the emission from 687 to 440 nm and absorption from 577 to 355 nm. The probe has good water solubility, high sensitivity and selectivity, allowing it to be used for imaging of HSO3- internalization and production endogenously. The capability of probe EHDI for HSO3- was then validated by traditional HPLC technology, enabling accurately detect HSO3- in beef samples. The successful development of this probe thus offers a new tool for investigating HSO3- in situ in food and biological conditions.

Multiple pulse amperometry in low pressure chromatography for parallel determination of oxidizable and reducible compounds. Analysis of a green coffee extract as a case study

In this paper, the determination of both oxidizable and reducible compounds within a single chromatographic run is exploited for the first time, using a low-pressure chromatographic system and multiple pulse amperometric detection. The case study selected focussed on the analysis of green coffee extracts. The separation of the compounds was carried out using a 1-cm length monolithic column and an eluent prepared by mixing an aqueous solution of an ion-pair reagent, perfluoroheptanoic acid (PFHpA), and acetonitrile. The parallel determination of oxidizable and reducible compounds was performed by application of two consecutive pulses, E1 = +1.6 V and E2 = -1.5 V. At anodic conditions, the chromatographic peaks for 5-caffeoylquinic acid (5-CQA), caffeine and 5-feruloylquinic acid (5-FQA) were detected, while at cathodic conditions, a chromatographic peak was ascribed for trigonelline. In the developed methodology, the use of multiple pulse amperometry provided better sensitivity if compared to previously described amperometric methodologies determining either oxidizable or reducible compounds. Detection limits for the referred compounds of ca. 1 × 10-5 mol L-1, an analysis rate of 12 h-1 and an acetonitrile consumption of 0.07 mL per analysis were achieved. The approach presented demonstrates the possibility of combining low pressure chromatographic systems and multiple pulse amperometry, in the development of new, low-cost and fast methodologies for multi-analyte determinations.

Voltammetric Determination of 3-Methylmorphine Using Glassy Carbon Electrode Modified with rGO and Bismuth Film

This work reports the development and application of a simple, rapid and low-cost voltammetric method for the determination of 3-methylmorphine at nanomolar levels in clinical and environmental samples. The proposed method involves the combined application of a glassy carbon electrode modified with reduced graphene oxide, chitosan and bismuth film (Bi-rGO-CTS/GCE) via square-wave voltammetry using 0.04 mol L^-1 Britton-Robinson buffer solution (pH 4.0). The application of the technique yielded low limit of detection of 24 × 10^-9 mol L^-1 and linear concentration range of 2.5 × 10^-7 to 8.2 × 10^-6 mol L^-1. The Bi-rGO-CTS/GCE sensor was successfully applied for the detection of 3-methylmorphine in the presence of other compounds, including paracetamol and caffeine. The results obtained also showed that the application of the sensor for 3-methylmorphine detection did not experience any significant interference in the presence of silicon dioxide, povidone, cellulose, magnesium stearate, urea, ascorbic acid, humic acid and croscarmellose. The applicability of the Bi-rGO-CTS/GCE sensor for the detection of 3-methylmorphine was evaluated using synthetic urine, serum, and river water samples through addition and recovery tests, and the results obtained were found to be similar to those obtained for the high-performance liquid chromatography method (HPLC)-used as a reference method. The findings of this study show that the proposed voltammetric method is a simple, fast and highly efficient alternative technique for the detection of 3-methylmorphine in both biological and environmental samples.

Transition metal copper composite ionic liquid self-built ratiometric sensor for the detection of paracetamol

In this paper, a MOF derivative Cu-PF₆-MOF composed of transition metal copper and ionic liquid [BMIM] PF₆ was used to construct a ratiometric electrochemical sensor for paracetamol detection. Cu-PF₆-MOF was synthesized by chemical bath method and characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), X-ray Photoelectron Spectroscopy (XPS) and X-ray powder diffraction (XRD). Owing to the introduction of ionic liquid [BMIM] PF₆ and the synthetic effect on transition metal copper and ionic liquid [BMIM] PF₆, Cu-PF₆-MOF has the higher conductivity, larger electroactive surface area and better intrinsic catalytic properties of the skeletal transition metal, exhibiting enhanced electrocatalytic response to the reduction of paracetamol. The stable reduction peak at -104 mV was used as the ratiometric signal for analytical paracetamol detection using differential pulse voltammetry (DPV), with a linear range of 0.1-100 μM and a detection limit of 0.03 μM (S/N = 3). In addition, the constructed sensor showed good reproducibility, stability and interference resistance, as well as ideal recoveries (98.20%-104.40%) for the analysis of paracetamol in water samples.

Advances of Drugs Electroanalysis Based on Direct Electrochemical Redox on Electrodes: A Review

The strong development of mankind is inseparable from the proper use of drugs, and the electroanalytical research of drugs occupies an important position in the field of analytical chemistry. This review mainly elaborates the research progress of drugs electroanalysis based on direct electrochemical redox on various electrodes for the recent decade from 2011 to 2021. At first, we summarize some frequently used electrochemical data processing and electrochemical mechanism research derivation methods in the literature. Then, according to the drug therapeutic and application/usage purposes, the research progress of drugs electrochemical analysis is classified and discussed, where we focus on drugs electrochemical reaction mechanism. At the same time, the comparisons of electrochemical sensing performance of the drugs on various electrodes from recent studies are listed, so that readers can more intuitively compare and understand the electroanalytical sensing performance of each modified electrode for each of the drug. Finally, this review discusses the shortcomings and prospects of the drugs electroanalysis based on direct electrochemical redox research.

Ni/NiO/Ni-B/graphene heterostructure-modified electrodes and their electrochemical activities towards acetaminophen

The surface of graphene was decorated with nickel/nickel oxide/nickel-boron particles to develop high-performance electrochemical sensors. The nanohybrid structures were prepared via a one-step reduction method under an oxygen-rich atmosphere to obtain an oxide phase besides metallic nickel nanoparticles. In addition, the use of NaBH₄ as the reducing agent enabled simultaneous formation of Ni-B species on the graphene surface. XRD, XPS, TEM, Raman, and TGA analyses were implemented to characterize the samples. The XRD and XPS results revealed the presence of Ni/NiO/Ni-B on the surface of graphene. The electroanalytical performance of the nanocomposite was investigated against acetaminophen, which is an extensively exploited antipyretic and analgesic drug. The analytical performance results showed that the Ni/NiO/Ni-B/Gr-based sensors had a very wide working window between 10 μM and 2500 μM (y (μA) = 10.706x (mM) + 0.3151 (R² = 0.9993)). The excellent storage stability, selectivity, and recovery results along with the high analytical performance make the novel Ni/NiO/Ni-B/Gr hybrid systems promising materials for the development of novel sensor platforms.

The Scavenging Effect of Myoglobin from Meat Extracts toward Peroxynitrite Studied with a Flow Injection System Based on Electrochemical Reduction over a Screen-Printed Carbon Electrode Modified with Cobalt Phthalocyanine: Quantification and Kinetics

The scavenging activity of myoglobin toward peroxynitrite (PON) was studied in meat extracts, using a new developed electrochemical method (based on cobalt phthalocyanine-modified screen-printed carbon electrode, SPCE/CoPc) and calculating kinetic parameters of PON decay (such as half-time and apparent rate constants). As reactive oxygen/nitrogen species (ROS/RNS) affect the food quality, the consumers can be negatively influenced. The discoloration, rancidity, and flavor of meat are altered in the presence of these species, such as PON. Our new highly thermically stable, cost-effective, rapid, and simple electrocatalytical method was combined with a flow injection analysis system to achieve high sensitivity (10.843 nA µM⁻¹) at a nanomolar level LoD (400 nM), within a linear range of 3–180 µM. The proposed biosensor was fully characterized using SEM, FTIR, Raman spectroscopy, Cyclic Voltammetry (CV), Differential Pulse Voltammetry (DPV), and Linear Sweep Voltammetry (LSV). These achievements were obtained due to the CoPc-mediated reduction of PON at very low potentials (around 0.1 V vs. Ag/AgCl pseudoreference). We also proposed a redox mechanism involving two electrons in the reduction of peroxynitrite to nitrite and studied some important interfering species (nitrite, nitrate, hydrogen peroxide, dopamine, ascorbic acid), which showed that our method is highly selective. These features make our work relevant, as it could be further applied to study the kinetics of important oxidative processes in vivo or in vitro, as PON is usually present in the nanomolar or micromolar range in physiological conditions, and our method is sensitive enough to be applied.

A Review of Analytical Methods for Codeine Determination

Codeine is derived from morphine, an opioid analgesic, and has weaker analgesic and sedative effects than the parent molecule. This weak opioid is commonly used in combination with other drugs for over-the-counter cough relief medication. Due to the psychoactive properties of opioid drugs, the easily obtained codeine often becomes subject to misuse. Codeine misuse has emerged as a concerning public health issue due to its associated adverse effects such as headache, nausea, vomiting, and hemorrhage. Thus, it is very important to develop reliable analytical techniques to detect codeine for both quality control of pharmaceutical formulations and identifying drug misuse in the community. This review aims to provide critical outlooks on analytical methods applicable to the determination of codeine.

Enhanced chemiluminescence determination of paracetamol

Due to the severe consequences of potential overdoses of paracetamol (PCM) on the human body, the measurement of PCM in pharmaceutical and biological samples is essential.

Boron Doped Diamond Electrodes in Flow-Based Systems

Boron-doped diamond (BDD) electrodes present several notable properties, such as the largest potential window of all electrode materials (especially in anodic potentials), low background and capacitive currents, reduced fouling compared to other electrodes, mechanical robustness, and good stability over time. On the other hand, flow-based systems are known as well-established approaches to minimize reagent consumption and waste generation and with good compromise between sample throughput and analytical performance (mechanization of chemical assays). This review focuses on the use of BDD electrodes for electrochemical detection in flow systems, such as flow injection analysis (FIA), batch injection analysis (BIA), high performance liquid chromatography (HPLC), and capillary electrophoresis (CE). The discussion deals with the historical evolution of BDD, types of electrochemical pre-treatments (cathodically/H-terminated or anodically/O-terminated), cell configurations, and analytical performance. Articles are discussed in chronological order and subdivided according to the type of flow system: FIA, BIA, HPLC, and CE.