Directly grown of 3D-nickel oxide nano flowers on TiO2 nanowire arrays by hydrothermal route for electrochemical determination of naringenin flavonoid in vegetable samples

Monitoring of Specific Phytoestrogens by Dedicated Electrochemical Sensors: A Review

Phytoestrogens are non-steroidal estrogens produced from plants that can bind with the human body's estrogenic receptor site and be used as a substitute for maintaining hormonal balance. They are mainly classified as flavonoids, phenolic acids, lignans, stilbenes, and coumestans; some are resocyclic acids of lactones, which are mycotoxins and not natural phytoestrogen. Phytoestrogens have many beneficial medicinal properties, making them an important part of the daily diet. Electrochemical sensors are widely used analytical tools for analysing various pharmaceuticals, chemicals, pollutants and food items. Electrochemical sensors provide an extensive platform for highly sensitive and rapid analysis. Several reviews have been published on the importance of the biological and medicinal properties of phytoestrogens. However, this review provides an overview of recent work performed through electrochemical measurements with electrochemical sensors and biosensors for all the classes of phytoestrogens done so far since 2019.

Recent Advances in Sensing Materials Targeting Clinical Volatile Organic Compound (VOC) Biomarkers: A Review

In general, volatile organic compounds (VOCs) have a high vapor pressure at room temperature (RT). It has been reported that all humans generate unique VOC profiles in their exhaled breath which can be utilized as biomarkers to diagnose disease conditions. The VOCs available in exhaled human breath are the products of metabolic activity in the body and, therefore, any changes in its control level can be utilized to diagnose specific diseases. More than 1000 VOCs have been identified in exhaled human breath along with the respiratory droplets which provide rich information on overall health conditions. This provides great potential as a biomarker for a disease that can be sampled non-invasively from exhaled breath with breath biopsy. However, it is still a great challenge to develop a quick responsive, highly selective, and sensitive VOC-sensing system. The VOC sensors are usually coated with various sensing materials to achieve target-specific detection and real-time monitoring of the VOC molecules in the exhaled breath. These VOC-sensing materials have been the subject of huge interest and extensive research has been done in developing various sensing tools based on electrochemical, chemoresistive, and optical methods. The target-sensitive material with excellent sensing performance and capturing of the VOC molecules can be achieved by optimizing the materials, methods, and its thickness. This review paper extensively provides a detailed literature survey on various non-biological VOC-sensing materials including metal oxides, polymers, composites, and other novel materials. Furthermore, this review provides the associated limitations of each material and a summary table comparing the performance of various sensing materials to give a better insight to the readers.

Design of an Efficient Tin Selenide-Based Ternary Nanocomposite Electrode for Simultaneous Determination of Paracetamol, Tryptophan, and Caffeine

Electrochemical sensors play an essential role in the medical arena through assessing the drug quality and diagnosing diseases. The design of sensors relies on the electroactive properties of the material meticulously chosen to modify the electrode. Here in this work, a facile ternary SnSe/TiO₂@GO electroactive nanocomposite was prepared using tin selenide (SnSe) in combination with titanium dioxide (TiO₂) embedded on graphene oxide (GO). The ternary nanocomposite was characterized by X-ray diffraction, Raman, FT-IR, and X-ray photoelectron spectroscopy, energy dispersive analysis, and scanning electron microscopy. The ternary nanocomposite was then drop-coated on the GC electrode to form the SnSe/TiO₂@GO-GC electrode. Its electrochemical activity was demonstrated for simultaneous determination of paracetamol, tryptophan, and caffeine. The synergetic interaction of the components and their innate virtue showed enriched electrocatalytic activity such as a decrease in overpotential, enhancement in electron transfer, greater sensing ability and selectivity, wide linear range, and low detection limit toward the chosen analytes. Broad linear ranges of concentrations, 0.0089-410, 0.0136-87.66, and 0.0160-355 μM, with detection limits of 0.0030, 0.0053, and 0.0065 μM for paracetamol, tryptophan, and caffeine, respectively, were noticed. The electrode also displayed high selectivity, stability, repeatability, and reproducibility. Importantly, the study was successful for detection and quantification of the above components in real samples of blood serum, pharmaceutical formulations, and beverages.

Fabrication of 2D-MoSe2 incorporated NiO Nanorods modified electrode for selective detection of glucose in serum samples

Layered molybdenum diselenide (MoSe2) nanosheets were formed by the weak Van der Waals forces of attraction between Se and Mo atoms. MoSe2 has a larger space between the adjacent layers and smaller band gaps in the range of 0.85 to ~ 1.6 eV. In this study, MoSe2 nanosheets decorated nickel oxide (NiO) nanorods have been synthesized by hydrothermal method using sodium molybdate and selenium metal powder. NiO/MoSe2 composite formation was confirmed by powder X-ray diffraction analysis. In addition, the presence of MoSe2 nanosheets on NiO nanorods were confirmed by field emission scanning electron microscopy, high-resolution transmission electron microscopy and X-ray photoelectron spectroscopy. The Nyquist plots of NiO/MoSe2 coated glassy carbon electrode (GCE) was indicated that it had lower charge transfer resistance compared to NiO/GCE and MoSe2/GCE. Furthermore, as-prepared NiO/MoSe2/GCE was used to detect glucose in alkaline solution by cyclic voltammetry and amperometry techniques. The NiO/MoSe2/GCE was exhibited a linear response for the oxidation of glucose from 50 µM to 15.5 mM (R2 = 0.9842) at 0.5 V by amperometry. The sensor response time and the limit of detection were found to be 2 s and 0.6 µM for glucose. Moreover, selectivity of the NiO/MoSe2 sensor was tested in the presence of common interferent molecules such as hydrogen peroxide, fructose, lactose, ascorbic acid, uric acid, and dopamine. It was found that NiO/MoSe2/GCE did not respond to these interfering biomolecules. In addition, NiO/MoSe2/GCE had shown high stability, reproducibility and repeatability. Finally, the practical application of the sensor was demonstrated by detecting glucose in human blood serum with the acceptable recovery.

Development of Aloe vera-titanium oxide-based ultrasensitive sensor for the quantification of quercetin

In the present work, a novel sensor developed for the quantification of quercetin (QRC) is being reported. Due to synergistic effects of Aloe vera and titanium oxide, voltammetric performance of the developed sensor (ALV-TiO2/glassy carbon electrode) was greatly enhanced. The fabricated sensor was characterized by scanning electron microscopy, X-ray diffraction, energy dispersive X-ray, and electrochemical impedance spectroscopy. The sensor was applied to study electrochemical behavior of QRC using square wave voltammetry. Under optimal condition, the developed sensor exhibited a linear response in the range of 3.3 × 10-7 to 2.31 × 10-6 µM with a detection limit of 0.8 nM. The analytical utility of the proposed sensor was justified by applying it for the analysis of QRC in real samples.

Photocatalytic Hydrogen Evolution Using Bi-Metallic (Ni/Pt) Na2Ti3O7 Whiskers: Effect of the Deposition Order

Photocatalytic hydrogen production through ethanol photo-reforming using Na2Ti3O7 whiskers increases if the sodium titanate is decorated with well-known metallic catalysts such as Ni and Pt. Whereas wet impregnation with nickel gives only a slight increase in the activity, photo-deposition of Pt increased the H2 production by more than one order of magnitude. Through the combination of both co-catalysts (Ni and Pt) a superior performance in terms of H2 production is further observed. However, hydrogen yield is largely enhanced (almost three-fold), up to 778 μmol·g−1·h−1, if the Pt is photo-deposited on the surface of the catalyst before wet impregnation with Ni species (NTO/Pt/Ni) compared to H2 yield (283 μmol·g−1·h−1) achieved with the catalyst prepared in the reverse order (NTO/Ni/Pt). Structural, morphological, optical, and chemical characterization was carried out in order to correlate physicochemical properties with their photocatalytic activity. The X-ray photoelectron spectroscopy (XPS) results show a higher concentration of Pt2+ species if this metallic layer is under the nickel oxide layer. Moreover, X-ray diffraction patterns (XRD) show that Na2Ti3O7 surface is modified for both metal decoration processes.