Determination of carbamates in soils by liquid chromatography coupled with on-line postcolumn UV irradiation and chemiluminescence detection

Advances in Microfluidics Techniques for Rapid Detection of Pesticide Residues in Food

Food safety is a significant issue that affects people worldwide and is tied to their lives and health. The issue of pesticide residues in food is just one of many issues related to food safety, which leave residues in crops and are transferred through the food chain to human consumption. Foods contaminated with pesticide residues pose a serious risk to human health, including carcinogenicity, neurotoxicity, and endocrine disruption. Although traditional methods, including gas chromatography, high-performance liquid chromatography, chromatography, and mass spectrometry, can be used to achieve a quantitative analysis of pesticide residues, the disadvantages of these techniques, such as being time-consuming and costly and requiring specialist staff, limit their application. Therefore, there is a need to develop rapid, effective, and sensitive equipment for the quantitative analysis of pesticide residues in food. Microfluidics is rapidly emerging in a number of fields due to its outstanding strengths. This paper summarizes the application of microfluidic techniques to pyrethroid, carbamate, organochlorine, and organophosphate pesticides, as well as to commercial products. Meanwhile, the study also outlines the development of microfluidics in combination with 3D printing technology and nanomaterials for detecting pesticide residues in food.

A Simple and Reliable Dispersive Liquid-Liquid Microextraction with Smartphone-Based Digital Images for Determination of Carbaryl Residues in Andrographis paniculata Herbal Medicines Using Simple Peroxidase Extract from Senna siamea Lam. Bark

A simple and reliable dispersive liquid-liquid microextraction (DLLME) coupled with smartphone-based digital images using crude peroxidase extracts from cassia bark (Senna siamea Lam.) was proposed to determine carbaryl residues in Andrographis paniculata herbal medicines. The method was based on the reaction of 1-naphthol (hydrolysis of carbaryl) with 4-aminoantipyrine (4-AP) in the presence of hydrogen peroxide, using peroxidase enzyme simple extracts from cassia bark as biocatalysts under pH 6.0. The red product, after preconcentration by DLLME using dichloromethane as extraction solvent, was measured for blue intensity by daily life smartphone-based digital image analysis. Under optimized conditions, good linearity of the calibration graph was found at 0.10–0.50 mg·L⁻¹ (r² = 0.9932). Limits of detection (LOD) (3SD/slope) and quantification (LOQ) (10SD/slope) were 0.03 and 0.09 mg·L⁻¹, respectively, with a precision of less than 5%. Accuracy of the proposed method as percentage recovery gave satisfactory results. The proposed method was successfully applied to analyze carbaryl in Andrographis paniculata herbal medicines. Results agreed well with values obtained from the HPLC-UV method at 95% confidence level. This was simple, convenient, reliable, cost-effective and traceable as an alternative method for the determination of carbaryl.

Emerging vistas on pesticides detection based on electrochemical biosensors - An update

Organophosphates and carbamates pesticides are widely used to increase crop production globally causing a threat to human health and the environment. A variety of pesticides are applied during different stages of vegetable production. Therefore, monitoring the presence of pesticide residues in food and soil has great relevance to sensitive pesticide detection through distinct determination methods that are urgently required. Conventional techniques for the detection of pesticides have several limitations that can be overcome by the development of highly sensitive, fast, reliable and easy-to-use electrochemical biosensors. Herein, we describe the types of biosensors with the main focus on electrochemical biosensors fabricated for the detection of OPPs and carbamates pesticides. An overview of conventional techniques employed for pesticide detection is also discussed. This review aims to provide a glance of recently developed biosensors for some common pesticides like chlorpyrifos, malathion, parathion, paraoxon, and carbaryl which are present in food and environment samples.

A sensitive chemiluminescence detection approach for determination of 2,4-dinitrophenylhydrazine derivatized aldehydes using online UV irradiation - luminol CL reaction. Application to the HPLC analysis of aldehydes in oil samples

Aldehydes are toxic carbonyl compounds that are identified in various matrices surrounding us. For instance, aldehydes could be formed during the cooking and frying of foods which affects the food quality and safety. Derivatization is a must for the determination of aldehydes as they lack intrinsic chromophoric groups. 2,4-Dinitrophenyl hydrazine (DNPH) is the most used derivatizing reagent for aldehydes and the formed hydrazones could be determined by either HPLC-UV or LC-MS. However, UV detection is non-sensitive, and the MS equipment is expensive and not widely available. Thus, herein we report a smart chemiluminescence (CL) detection method for the DNPH aldehydes derivatives. These derivatives are supposed to possess photosensitization ability due to the presence of strong chromophoric structures; nitrobenzene and phenyl hydrazone. Upon their UV irradiation, singlet oxygen is found to be produced which then converts the DNPH-aldehyde derivative into hydroperoxide. Next, the hydroperoxide reacts with luminol in an alkaline medium producing a strong CL. An HPLC system with online UV irradiation and online reaction with luminol followed by CL detection was constructed and used for the determination of aldehydes after their derivatization with DNPH. The developed method showed excellent sensitivity with detection limits down to 1.5-18.5 nM. The achieved sensitivity is superior to that obtained by HPLC-UV and LC-MS detection methods for DNPH-aldehydes derivatives. Additionally, our approach is an chemiluminogenic where the DNPH reagent itself does not produce CL which is an excellent advantage. The method was applied successfully for the determination of aldehydes in canola oil samples using simple liquid-liquid extraction showing good recovery (87.0-106.0%), accuracy (87.2-106.6), and precision (RSD≤10.2%). After analysis of fresh and heated oil samples, it was demonstrated that heating of oil, even for short time, strongly elevated the level of their aldehydes' content. At last, it was found that the results of the analysis of aldehydes in oil samples using the proposed method perfectly matched those obtained by a reference LC-MS method.

Current overview and perspectives in environmentally friendly microextractions of carbamates and dithiocarbamates

Carbamates and dithiocarbamates are two classes of pesticides widely employed in the agriculture practice to control and avoid pests and weeds, hence, the monitoring of the residue of those pesticides in different foodstuff samples is important. Thus, this review presents the classification, chemical structure, use, and toxicology of them. Moreover, it was shown the evolution of liquid- and solid-phase microextractions employed in the extraction of carbamates and dithiocarbamates in water and foodstuff samples. The classification, operation mode, and application of the microextractions of liquid-phase and solid-phase used in their extraction were discussed and related to the analytical parameters and guidelines of green analytical chemistry.

A paper-based chemiluminescence detection device based on S,N-doped carbon quantum dots for the selective and highly sensitive recognition of bendiocarb

Bendiocarb, a type of carbamate pesticide, plays a crucial role in controlling a wide range of pests. Due to its harmful impact on humans and the environment, the need for inexpensive, portable, efficient and easy-to-use analytical devices has become essential. In this study, an environmentally friendly paper-based analytical device (PAD) with a chemiluminescence (CL) sensing platform was investigated and characterized for the facile, reliable and sensitive detection of the bendiocarb pesticide. It is based on the enhancing effect of SO32- on the CL reaction of sulfur, nitrogen-doped carbon quantum dots (S,N-CQDs)-KMnO4 in acidic media. According to the experiments, S,N-CQDs and SO32- both are oxidized by KMnO4 to generate (S,N-CQDs*) and (SO2*) in their excited states, emitting at 510 nm. This indicates that an energy transfer process is taking place from SO2* to S,N-CQDs, resulting in a remarkably intensified CL emission. Interestingly, another emission was also observed around 660 nm contributing to about 20 to 25% of the total CL emission. This emission is related to the Mn2+* species produced by reducing MnO4-. The established multi-emission CL system was tested for analytical applications. Under optimal experimental conditions, a good linear relationship was observed between the bendiocarb concentration and the CL intensity of the established CL system. The linear detection range was 0.1-10 μg mL-1, with a limit of detection (LOD) of 0.02 μg mL-1. Finally, the method was successfully applied for the measurements of bendiocarb in water and juice samples. The obtained recovery values (97.5-105.5) verified the suitable accuracy of the results.

Development of a method based on dispersive liquid-liquid microextraction followed by partial vaporization of the extract for ultra-preconcentration of some pesticide residues in fruit juices

A new simple and efficient method has been developed for the ultra-preconcentration of multiclass pesticide residues including penconazole, chlorpyrifos, ametryn, clodinafop-propargyl, diniconazole, oxadiazon, and fenpropathrin from some fruit juice samples based on evaporation of the sedimented organic phase obtained from dispersive liquid-liquid microextraction. The enriched target analytes were analyzed by gas chromatography-flame ionization detection. In the microextraction procedure, a mixture of iso-propanol as a disperser and 1,2-dibromoethane as an extraction solvent is quickly injected into an aqueous phase containing the analytes and centrifuged. Afterward, the sedimented phase is transferred into a special shaped vaporization vessel and vaporized with nitrogen gas stream until remaining about 2 µL of it. Eventually, 1 µL of the remained sedimented phase is removed and analyzed by separation system. The optimum extraction and disperser solvents were found to be 1,2-dibromoethane and iso-propanol, respectively. In addition, the optimum pH range was 6-8, and nitrogen gas stream at a flow rate of 90 mL min^-1 in a downward oriented vessel was applied. Eventually, the limits of detection and quantification were obtained in the ranges of 45-78 and 149-261 ng L^-1, respectively. Relative standard deviations at the concentrations of 300, 500 and 1000 ng L^-1 of each analyte were ranged between 2.2% and 5.8% for intra-day (n = 6) precision. Inter-day (n = 3) precision at a concentration of 500 ng L^-1 of each analyte was obtained in the range of 4.9-7.1%. In addition, enrichment factors and extraction recoveries were ranged from 1382-2246 and 55-89%, respectively. Finally, the method was successfully utilized in analysis of the target pesticides in the selected juices.

A review of recent developments based on chemiluminescence detection systems for pesticides analysis

Chemiluminescence is one of the most coveted methods for sensitive determination of pesticides in food and environmental samples. To date, many methods have been developed for qualitative and quantitative analysis of pesticides, ranging from traditional to advanced methods. This study outlines the progress in the conventional and advanced analytical methods, coupled to a chemiluminescence detection system, that are employed for the determination of pesticides in food and environmental samples. Different analytical methods including chromatographic methods, flow-based systems, and paper-based systems are reviewed in this paper. As well, new advances in the application of nanomaterials, aptamer, and molecularly imprinted polymers are highlighted. We also address the challenges and difficulties associated with these methods. Finally, we highlight the future direction in this active field of research.