Evaluation of solution processable polymer reduced graphene oxide transparent films as counter electrodes for dye-sensitized solar cells

Two-Dimensional Ferroelectric C2N/In2Se3 Heterobilayer with Tunable Electronic Property and Photovoltaic Effect

Two-dimensional ferroelectric monolayer materials with reversible spontaneous polarization provide more regulatory dimensions for their relevant van der Waals heterostructures. Using first-principles calculations, we construct the C2N/In2Se3 bilayer heterostructure and study its physical properties as well as the effects of E-field and strain. The results indicate that the intrinsic polarization of the component In2Se3 monoalyer can significantly adjust the electronic properties of the C2N/In2Se3 heterobilayer. When the polarization of the In2Se3 monolayer points to the interface (up-In2Se3), the C2N/In2Se3 bilayer behaves as the type-I indirect band gap heterostructure, while it transforms to the type-II direct band gap heterostructure after reversing the polarization of the In2Se3 monolayer (dp-In2Se3). Furthermore, the two C2N/In2Se3 heterostructures both have enhanced optical absorption in the visible region than the isolated In2Se3 and C2N monolayers. More importantly, the external electric field and strain can easily regulate the electronic properties of the C2N/In2Se3 heterostructures. The power conversion efficiency (PCE) of the type-II C2N/dp-In2Se3 heterostructure is 8.16%, and the electric field of 0.1 V/Å and the strain of -2% can transform the C2N/up-In2Se3 heterostructure into type-II one, conducive to the high PCE up to 24.03 and 24%, respectively. Our proposed C2N/In2Se3 heterostructure is promising in future luminescent and photovoltaic fields, and our findings also provide a strategy for functionalizing 2D monolayer materials by the intrinsic polarization property of ferroelectric materials.

Inversion of the Photogalvanic Effect of Conductive Polymers by Porphyrin Dopants

Conductive polymers are widely used as active and auxiliary materials for organic photovoltaic cells due to their easily tunable properties, high electronic conductivity, and light absorption. Several conductive polymers show the cathodic photogalvanic effect in pristine state. Recently, photoelectrochemical oxygen reduction has been demonstrated for nickel complexes of Salen-type ligands. Herein, we report an unexpected inversion of the photogalvanic effect caused by doping of the NiSalen polymers with anionic porphyrins. The observed effect was studied by means of UV-Vis spectroscopy, cyclic voltammetry and chopped light chronoamperometry. While pristine NiSalens exhibit cathodic photopolarization, doping with porphyrins inverts the polarization. As a result, photoelectrochemical oxidation of the ascorbate proceeds smoothly on the NiSalen electrode doped with zinc porphyrins. The highest photocurrents were observed on NiSalen polymer with o-phenylene imine bridge, doped with anionic zinc porphyrin. Assuming this, porphyrin serves both as a catalytic center for the oxidation of ascorbate and an internal electron donor, facilitating the photoinduced charge transport and anodic depolarization.

Recent advances in graphene-based materials for dye-sensitized solar cell fabrication

In the past few years, dye-sensitized solar cells (DSSCs) have received considerable research attention, as potential alternatives to the commonly used, but expensive, silicon-based solar cells owing to the low-cost, facile fabrication procedures, less impact on the environment, capability of working even under low incoming light levels, and flexibility of DSSCs. However, the relatively low power conversion efficiencies (PCEs) and poor long-term operational stability of DSSCs still limit their large-scale and commercial applications. As a consequence, this has prompted tremendous research effort towards the realization of high performance and sustainable devices, through tailoring of the properties of the various DSSC components, via approaches such as introducing novel materials and new synthesis techniques. Among these, the application of novel materials, especially carbon-based materials, such as graphene and its derivatives, is more appealing due to their excellent optoelectronic, mechanical, thermal and chemical properties, which give them ample potential to replace or modify the traditional materials that are commonly used in the fabrication of the various DSSC components. In addition, the low-cost, abundance, non-toxicity, large specific surface area, flexibility and superior stability of graphene-based materials have enabled their recent use as photoanodes, i.e., transparent conducting electrodes, semiconducting layers and dye-sensitizers, electrolytes and counter electrodes in DSSCs. Recently, the introduction of graphene-based materials into DSSCs resulted in a pronounced increase in PCE from ∼0.13 to above 12.00%. Thus, employing the recent breakthroughs can further improve the optoelectronic properties of the various DSSC components and, hence, close the gap between DSSCs and their silicon-based counterparts that are currently exhibiting desirable PCEs of above 26%. Therefore, this review focuses on the recent applications of graphene-based materials as photoanodes, electrolytes and counter electrodes, for the possible fabrication of all-carbon-based DSSCs. The limitations, merits and future prospects of graphene-based DSSCs are discussed, so as to improve their photovoltaic performance, sustainability and cost-effectiveness.

Carbon nanomaterials against pathogens; the antimicrobial activity of carbon nanotubes, graphene/graphene oxide, fullerenes, and their nanocomposites

Recently, antibiotic resistance of pathogens has grown given the excessive and inappropriate usage of common antimicrobial agents. Hence, producing novel antimicrobial compounds is a necessity. Carbon nanomaterials (CNMs) such as carbon nanotubes, graphene/graphene oxide, and fullerenes, as an emerging class of novel materials, can exhibit a considerable antimicrobial activity, especially in the nanocomposite forms suitable for different fields including biomedical and food applications. These nanomaterials have attracted a great deal of interest due to their broad efficiency and novel features. The most important factor affecting the antimicrobial activity of CNMs is their size. Smaller particles with a higher surface to volume ratio can easily attach onto the microbial cells and affect their cell membrane integrity, metabolic procedures, and structural components. As these unique characteristics are found in CNMs, a wide range of possibilities have raised in terms of antimicrobial applications. This study aims to cover the antimicrobial activities of CNMs (both as individual forms and in nanocomposites) and comprehensively explain their mechanisms of action. The results of this review will present a broad perspective, summarizes the most remarkable findings, and provides an outlook regarding the antimicrobial properties of CNMs and their potential applications.