Enhancing the performance of porous rice husk silica through branched polyethyleneimine grafting for phosphate adsorption

Nutrient release pattern and mitigation of N2O emissions under the application of activated poultry manure compost biochar with organic resources

Biochar was generally used to reduce the macronutrient releases and to mitigate N2O gas emissions in cropland. This experiment evaluated the trend of major plant nutrient releases using the modified Hyperbola model and the greenhouse gas emissions by incorporating different poultry manure compost biochar with organic resources. The treatments consisted of the control as the organic fertilizer materials, the incorporated poultry manure compost biochar with organic fertilizer materials (PMCBF), and the incorporated plasma-activated poultry manure compost biochar with organic fertilizer materials (PAMBF) under redox conditions. The results showed that the cumulated highest concentrations of NH4-N and NO3-N were 2168.6 mg L-1 and 21.7 mg L-1 in the control, respectively. Compared with the control, the predicted reduction rates of NH4-N release from the PMCBF and PAMBF were 26.2% and 15.4%, respectively. In the control, the cumulated highest concentrations of PO4-P and K in leachate were 681.04 mg L-1 and 120.5 mg L-1, respectively. The predicted reduction rates of PO4-P and K were 55.1% and 15.5%, respectively, under the PAMBF compared to the control. The modified Hyperbola model with cumulated NH4-N, PO4-P, and K-releases under the treatments was a good fit (p < 0.0001). For greenhouse gas (GHG) emissions, the lowest cumulative N2O was 59.59 mg m-2 in the soil incorporated with PMCBF, and its reduction rate was 23.5% compared with the control. The findings of this study will contribute to more profound insights into the potential application of PAMBF and PMCBF as bio-fertilizers adapted to mitigate NH4-N, PO4-P, and K releases and N2O emissions, offering scientific evidence for organic farming strategies.

Evaluation of the Effect of Polyethylenimine on Boron Adsorption by Soil Minerals

The removal of hazardous ions from water is crucial for safeguarding both the environment and human health. Soil minerals, integral components of soil, play a vital role as adsorbents for various contaminants, including heavy metal ions, organic dyes, and detergents. This study investigates the interaction between boron ions and soil minerals (gibbsite, kaolinite, and montmorillonite) in the presence of polyethylenimine (PEI). The minerals underwent characterization based on specific surface area, particle size distribution, zeta potential, and the presence of functional groups. The influence of PEI addition on the stability of the soil mineral suspension was evaluated by turbidimetry. Mineral-boron and mineral-boron-PEI interactions were explored under varying conditions, including pH, initial boron concentration, and mineral quantity, with all adsorption experiments conducted over 24 hours. Using the Langmuir isotherm, the maximum adsorption capacity of the studied minerals was determined for boron both without and in the presence of PEI. For gibbsite, kaolinite and montmorillonite, it was 30.63, 24.55 and 26.62 mg g-1, respectively, while in the presence of PEI, it increased to 33.11, 26.61 and 45.47 mg g-1, respectively. The addition of PEI enhanced boron adsorption from aqueous solutions, increasing the removal efficiency from 65 % to about 80 %.

Strategies to attenuate ciprofloxacin inhibition on enhanced biological phosphorus removal from wastewater and its recoverability

The inhibiting effects of ciprofloxacin (CIP) on enhanced biological phosphorus removal (EBPR) were investigated with no change in reactor operation and with increased aeration rate and sludge retention time (SRT) to explore inhibition-alleviating solutions. Additionally, performance recoverability was evaluated. The results showed that the phosphorus removal efficiency in the presence of 0.002-0.092 mg/L CIP for 7 days was only 12.5%. Increasing the aeration rate relieved inhibition (33.5% phosphorus removal efficiency on Day 7), and increasing SRT slowed EBPR performance deterioration. The EBPR performance recovered from CIP inhibition and increases in the aeration rate and SRT resulted in different recovery phenomena. The maximum PO43--P release rate continued to decrease in the first 2 days of the recovery stage and then gradually increased. However, the maximum PO43--P uptake rate immediately increased at different rates among reactors, which might be attributed to variations in the microbial community structure, decreased poly-P content, and enhanced abundances of ABC transporters and quorum sensing. It was found that some microorganisms associated with phosphorus removal were more tolerant to CIP than glycogen accumulating organisms. Moreover, the increased relative abundance of the qepA gene indicated that the microorganisms in the EBPR system had strong antibiotic resistance capacity. The bacterial community structure was significantly affected by CIP and could not recover to the initial structure. The results help to provide technical support for the operation of the EBPR process in the presence of CIP and to increase the understanding of system recoverability.

Hyperbranched-Polyethylenimine-Functionalized Coal Fly Ash as an Adsorbent for the Removal of Hexavalent Chromium and Reuse as a Dye Photocatalyst

Coal fly ash (CFA) has been extensively researched as an adsorbent for heavy metals, but its application is limited by its low adsorption capacity. The modification of CFA with hyperbranched polymers results in improved adsorption capacities. Hyperbranched polyethylenimine (HPEI) is a hyperbranched polymer containing NH2 groups that can bind with heavy metal ions through complexation or electrostatic interactions. In this study, CFA-HPEI adsorbents with various HPEI loadings (1-5%) were prepared and evaluated for the removal of Cr(VI). The successful incorporation of HPEI onto CFA was confirmed using Fourier transform infrared, elemental analysis, and X-ray photoelectron spectroscopy (XPS). The 3% CFA-HPEI loaded adsorbent resulted in optimum results when the effect of pH and adsorbent dosage was studied. The pseudo-second-order kinetics model best described the adsorption kinetics at an initial concentration of 20 mg/L. The Freundlich adsorption isotherm model best fitted the equilibrium adsorption data with a maximum adsorption capacity of 85.93 mg/g. The Cr-loaded adsorbent was reused as a photocatalyst to degrade methylene blue (MB) in the presence of visible light. The loaded adsorbent degraded 98.9% of MB (5 mg/L) within 180 min and was accompanied by compounds with m/z of 173 and 234, corresponding to the intermediate degradation of Azure A. The XPS analysis confirmed the coexistence of Cr(III) and Cr(VI) on the surface of the adsorbent. In addition, the loaded adsorbent exhibited good stability following MB degradation with no structural changes observed. Thus, CFA-HPEI adsorbents can be utilized as low-cost adsorbents for the remediation of toxic Cr(VI) from water and wastewater. The Cr-loaded CFA-HPEI adsorbent can be effectively reused as a photocatalyst, thus reducing environmental pollution.

High capacity and selective adsorption of Congo red by cellulose-based aerogel with mesoporous structure: Adsorption properties and statistical data simulation

Large quantities of organic dyes are discharged into the environment, causing serious damage to the ecosystem. Therefore, it is urgent to develop inexpensive adsorbents to remove organic dyes. A novel cellulose-based aerogel (MPPA) with 3D porous structure was prepared by using cassava residue (cellulose) as basic construction blocks, doping ferroferric oxide (Fe3O4) for magnetic separation, and applying polyethyleneimine (PEI) as functional material for highly efficient and selective capture of Congo red (CR). MPPA exhibited porous network structure, numerous active capture sites, nontoxicity, high hydrophilicity, and excellent thermal stability. MPPA showed superior adsorption property for CR, with an equilibrium adsorption capacity of 2018.14 mg/g, and still had an adsorption property of 1189.31 mg/g after five recycling procedures. In addition, MPPA has excellent selectivity for CR in four binary dye systems. The adsorption behavior of MPPA on CR was further explored using a multilayer adsorption model, EDR-IDR hybrid model and AOAS model. Electrostatic potential and independent gradient models were used to further verify the possible interaction between MPPA and CR molecules. In conclusion, MPPA is a promising adsorbent in the field of treating anionic dyes.

Construction of 3D network aluminum sludge-based hydrogel beads: combination of macroization, amino functionalization, and resource utilization

An aluminum sludge-based composite material was constructed against the problems of phosphorus pollution and the waste of aluminum sludge resources. Utilizing metal Ce doping and hydrogel microbeads with pore preparation, the adsorption performance of the original sludge was improved. Meanwhile, the macroscopic body was constructed, and on this basis, polyethyleneimine (PEI) was introduced to complete the amino functionalization further to enhance the adsorption of phosphorus by the adsorbent, and NH-CeAIS-10 microbeads were successfully prepared. In adsorption, microbeads with larger specific surface area and richer functional groups are better choice compared to original sludge. The results of SEM, BET, FT-IR, and XPS analyses indicate that the adsorption of phosphorus by the microbeads is mainly achieved through electrostatic interactions, ligand exchange, and the formation of inner-sphere complexes. According to the Langmuir model, the maximum phosphorus adsorption capacity of NH-CeAIS-10 was 29.56 mg g-1, which was four times higher compared to native aluminum sludge. This also confirms the significant enhancement of phosphorus adsorption through the modification of aluminum sludge. Besides, in dynamic adsorption column experiments, the material exhibited up to 99% removal in simulated wastewater for up to 30 days, demonstrating the great adsorption potential of NH-CeAIS-10 in engineering applications.

Hydrochloric acid-modified fungi-microalgae biochar for adsorption of tetracycline hydrochloride: Performance and mechanism

Novel biochar (BC) was prepared by pyrolysis using Aspergillus oryzae-Microcystis aeruginosa (AOMA) flocs as raw materials. It has been used for tetracycline hydrochloride (TC) adsorption along with acid (HBC) and alkali modification (OHBC). Compared with BC (114.5 m² g^-1) and OHBC (283.9 m² g^-1), HBC had a larger specific surface area (S_BET=338.6 m² g^-1). Meanwhile, the Elovich kinetic and Sip isotherm models adequately fit the adsorption data, and intraparticle diffusion is the controlling factor for TC adsorption diffusion on HBC. Furthermore, the thermodynamic data indicated that this adsorption was endothermic and spontaneous. The experimental results demonstrated that there are multiple interactions during the adsorption reaction process, including pore filling, H-bonds, π-π interaction, hydrophobic affinity, and van der Waals forces. In general, biochar prepared from flocs of AOMA can be used to remediate tetracycline-contaminated water, and it is of great significance in improving resource utilization.

Surface functionalization of bamboo leave mediated synthesized SiO2 nanoparticles: Study of adsorption mechanism, isotherms and enhanced adsorption capacity for removal of Cr (VI) from aqueous solution

Green synthesis of nanoparticles (NPs) provides economic and environmental benefits as an alternative to chemical or physical methods. Furthermore, the surface properties of such NPs can be modulated by means of the functionalization with different groups making them suitable for various advanced functional applications including water pollutants removal using adsorption technique. In the present work, an eco-friendly synthesis route for nano-adsorbent SiO₂ NPs and subsequent surface modifications for enhanced adsorption capacity in removal of Cr(VI) ions from aqueous solution are reported. The green synthesis of SiO₂ NPs was carried out using simple bamboo leaves followed by surface modification with amine (A-SiO₂) and carboxylic (C-SiO₂) functional groups with aim to study the effect of functionalization on adsorption capacity. These nano-adsorbents were characterized by FTIR, SEM, XPS, BET, and zeta potential. and adsorption of Cr(VI) was studied at varying parameters i.e. NPs mass, contact time, and solution pH. The investigation shows interesting results revealing the importance of interactions between the surface functional groups on SiO₂ NPs and Cr(VI) species as well as experimental conditions for the choice of surface modifier to achieve a maximum adsorption capacity. The adsorption mechanism has been studied using Langmuir, Freundlich and Temkin adsorption isotherms. The maximum adsorption capacity has been achieved in the case of A-SiO₂ NPs which was found to 174 mg/g and much higher than that of SiO₂ and C-SiO₂ NPs attributed to the selective adsorption and pH conditions. Additionally, A-SiO₂ NPs exhibit excellent recyclability indicating their suitability for promising and long term potential applications. This study provides a novel, simple and cost-effective synthesis/surface engineering technology for producing high performance recyclable nano-adsorbents for adsorptive removal of Cr(VI).

An insight into the green synthesis of SiO2 nanostructures as a novel adsorbent for removal of toxic water pollutants

Green synthesis of nanomaterials is a sustainable, biologically safe, reliable, and eco-friendly approach. Green synthesis is beneficial to reduce the devastating effects of the traditional chemical synthesis methods and particularly aims at decreasing the usage of toxic chemicals. This review deals with the green synthesis of silica nanoparticles (SiO₂ NPs) with emphasis on the engineering surface properties for enhanced adsorption capability and their applications as novel nano-adsorbents for water pollutants removal. Green synthesized SiO₂ NPs have shown excellent adsorption properties with higher adsorption capacity of 150-200 mg/g and more than 95% removal for various toxic water pollutants along with reusability for more than 5 cycles. These SiO₂ NPs show fascinating physical and chemical properties i.e. tunable size (5 nm to more than 100 nm), low toxicity, biocompatibility, high porosity, higher specific surface area (500--700 m²/g) making them attractive/suitable for several applications in biomedical, agriculture, catalysis, construction, water treatment, etc. Commonly, highly pure SiO₂ NPs are synthesized from organic chemicals (very expensive and highly toxic in nature) as a precursor that led to high production costs, high energy consumption, and environmental hazards. On the other hand, green synthesis of SiO₂ NPs from natural resources like biomass that includes rice husk, bamboo leaves/stem, sugarcane bagasse, corn cobs, wheat straw, etc. is cost-effective, less toxic, and eco-friendly which has been discussed in detail. Furthermore, the effect of key synthesis parameters (i.e., temperature, time, concentration, pH, etc.) on the morphology, size, purity, and specific surface area of SiO₂ NPs have been summarized. Finally, the applications of SiO₂ NPs as nano-adsorbents for the removal of toxic water pollutants (i.e., heavy metal cations, anions, dyes, etc.) including the adsorption mechanisms along with the future scope, challenges, and suggestions have been discussed.

Regenerable Kiwi Peels as an Adsorbent to Remove and Reuse the Emerging Pollutant Propranolol from Water

This work aims to characterize the adsorption process of propranolol HCl, an emerging pollutant and a widely used β-blocker, onto kiwi peels, an agricultural waste. The use of UV-vis spectroscopy was considered to obtain information about the pollutant removal working in the in-batch mode. In a relatively short time, the adsorption process could remove the pollutant from water. A kiwi peel maximum adsorption capacity of 2 mg/g was obtained. With the perspective of scaling up the process, preliminary in-flux measurements were also performed. The investigation of the whole in-batch adsorption process was conducted by studying the effect of ionic strength (adopting salt concentrations from 0 to 0.4 M), pH values (from 2 to 12), adsorbent/pollutant amounts (from 25 to 100 mg and from 7.5 to 15 mg/L, respectively), and temperature values (from 289 to 305 K). The thermodynamics, the adsorption isotherms, and the kinetics of the adsorption process were also carefully investigated. The Langmuir model fitted the experimental data well, with an R2 of 0.9912, restituting KL: 1 L/mg and Q0: 1.8 mg/g. The temperature increase enhanced the pollutant removal due to the endothermic adsorption characteristics. Accordingly, a ΔH°298K of +70 KJ/mol was obtained. The pseudo-first-order kinetic model described the process. Due to the results observed during the study of the effects of pH and ionic strength, the prominent presence of electrostatic interactions, working in synergy with hydrophobic forces and H-bonds between the pollutant and kiwi peel surfaces, was successfully demonstrated. In particular, FTIR-ATR measurements confirmed the latter findings. Finally, desorption experiments for recycling 100% of propranolol for each cycle were performed using 0.1 M MgCl2. Ten cycles of adsorption/desorption were obtained and indicated that the percentage of propranolol removal was not affected during each run, increasing the maximum adsorption from 2 to 20 mg/g.

Recycling rice husk for removal of phosphate and nitrate from synthetic and swine wastewater: Adsorption study and nutrient analysis of modified rice husk

The objective of this study was to determine the adsorbent potential of rice husk and its modified form for phosphate and nitrate removal from synthetic and swine-farm wastewater. The mechanism of adsorption as well as the potential of phosphate-/nitrate- adsorbed rice husk as nutrient rich residue was also investigated. Two-step modification of RH (using base-washing (BW) and chemical modification (CM) was conducted to compare the phosphate and nitrate removal. The effects of several factors (pH, sorbent dosage, contact time, initial concentration, and coexistence of both ions) were investigated to gain insight into the adsorption rate, behavior, and mechanism of the modified RH regarding phosphate and nitrate removal. The results of Fourier-transform infrared spectroscopy showed that the modification was successful by crosslinking with the amine group of the chemical agent. Fitting the adsorption kinetic data of phosphate showed physical adsorption, intraparticle diffusion, and chemisorption, whereas for nitrate, the data indicated mainly chemisorption. Fitting the adsorption isotherm data of phosphate and nitrate together showed adsorption on a monolayer coating of anions on the homogeneous sorbent's surface. The maximum phosphate and nitrate adsorption capacities were 6.94 and 2.46 mg/g, respectively, for a single adsorbate and 11.14 and 1.76 mg/g, respectively, for the binary solution. In real swine wastewater, removal efficiencies of phosphate, nitrite, nitrate, sulfate, and ammonia were 83.8%, 65.0%, >45.0%, 36.6%, and 2.6%, respectively, indicating that the modified RH would be effective for phosphate and nitrate removal from real wastewater. Finally, nutrient analysis of the phosphate- and nitrate-sorbed RH showed increases in nitrogen and phosphorus, which would be beneficial for further use of the RH as nutrient or fertilizer after adsorption.

Enhanced adsorption of Cu(II) and Zn(II) from aqueous solution by polyethyleneimine modified straw hydrochar

Heavy metals removal from aqueous phase by adsorption technique has recently attracted a considerable interest. Although various adsorbing materials have been developed, introducing more functional groups is considered as the most efficient way to promote the adsorption capacity of the selected adsorbent. However, this approach is usually limited in costly modification precursor and unguaranteed loading efficacy. In this study, waste corn straw was converted to adsorbent precursor by hydrothermal carbonization. The obtained hydrochar (HC) was chemically activated before being modified by polyethyleneimine (PEI). Multiple analysis methods including Scanning Electron Microscopy, Fourier Transform Infrared analysis, and X-ray Photoelectron Spectroscopy analysis verified the alkali activated hydrochar (alkali-HC) was more efficacy to enhance PEI grafting than acid activation. Based on this, the modified HC materials obtained a better adsorption performance. The sorption process of Cu(II) and Zn(II) on the acid-PEI-HC, alkali-PEI-HC, and pristine HC fitted the pseudo second order kinetic and Freundlich model well, and was dominated by chemisorption. Among these adsorbents, the adsorption capacity of alkali-PEI-HC to metal ions was the maximum, which was 207.6 mg/g to Zn(II) and 56.1 mg/g to Cu(II) at 298 K. Regeneration tests showed a result of no less than 60% of its removal capacity was achieved after five cycles. Therefore, alkali-PEI-HC performed as a promising composite sorbent for metal ions. In addition, the study described here has provided a new basis for the utilization of hydrochar (1.08 kWh kg^-1) derived from agricultural resources as a promising adsorbent precursor.

Phosphate Removal Using Polyethylenimine Functionalized Silica-Based Materials

In water and wastewater, phosphate anions are considered critical contaminants because they cause algae blooms and eutrophication. The present work aims at studying the removal of phosphate anions from aqueous solutions using silica particles functionalized with polyethylenimine. The parameters affecting the adsorption process such as pH, initial concentration, adsorbent dose, and the presence of competitive anions, such as carbonate, nitrate, sulfate and chromate ions, were studied. Equilibrium studies were carried out to determine their sorption capacity and the rate of phosphate ions uptake. The adsorption isotherm data fitted well with the Langmuir and Sips model. The maximum sorption capacity was 41.1 mg/g at pH 5, which decreased slightly at pH 7. The efficiency of phosphate removal adsorption increased at lower pH values and by increasing the adsorbent dose. The maximum phosphate removal was 80% for pH 5 and decreased to 75% for pH 6, to 73% for pH 7 and to 70% for pH 8, for initial phosphate concentration at about 1 mg/L and for a dose of adsorbent 100 mg/L. The removal rate was increased with the increase of the adsorbent dose. For example, for initial phosphate concentration of 4 mg/L the removal rate increased from 40% to 80% by increasing the dose from 0.1 to 2.0 g/L at pH 7. The competitive anions adversely affected phosphate removal. Though they were also found to be removed to a certain extent. Their co-removal provided an adsorbent which might be very useful for treating waters with low-level multiple contaminant occurrence in natural or engineered aquatic systems.