MXene: A two-dimensional material in selective water separation via pervaporation

Macroscopic assembly of 2D materials for energy storage and seawater desalination

Since the discovery of graphene in 2004, two-dimensional (2D) materials have attracted widespread attention due to their excellent physical and chemical properties in the fields of energy, environment, catalysis, and optoelectronics. However, there are still many key problems in the process of practical application. To further promote the potential of 2D materials for practical applications, macroscopic assembly of 2D materials is crucial for the continued development of 2D materials, especially in the fields of energy storage and seawater desalination. Therefore, this review focuses on the latest progress and current status related to the macroscopic assembly of 2D materials, including 1D fibers, 2D films, and 3D architectures. In addition, the application of macroscopic bodies assembled based on 2D materials in the fields of energy storage and seawater desalination is also introduced. Finally, future directions for the macroscopic assembly of 2D materials and their applications are prospected.

Ti2NTx quasi-MXene modified polyamide thin film composite reverse osmosis membrane with effective desalination and antifouling performance

In this study, considering the serious problem of lack of fresh water worldwide and the effectiveness of reverse osmosis (RO) membranes in water purification, we prepared improved RO membranes with two-dimensional quasi-MXene nanosheets. In this study, the MAX phase with the chemical formula of Ti2AlN was prepared through the reactive sintering route. Prosperous preparation of the MAX phase with the hexagonal crystalline structure was approved by an X-ray diffraction pattern. Compacted sheets morphology was recognized for the prepared MAX phase from transmittance electron microscopy and scanning electron microscopy micrographs. Then, Ti2NTx quasi-MXene nanosheets were prepared by selective ultrasonic-assisted exfoliation of the MAX phase. Polyamide (PA) thin-layer composite RO membranes with different weight percentages of Ti2NTx quasi-MXene were fabricated by the interfacial polymerization (IP) method. The addition of ultrasonic-assisted prepared quasi-MXene creates numerous and coherent nanochannels on the surface of the membrane. The optimum membrane with 0.01 wt% of quasi-MXene showed the highest pure water flux of 31.9 L m-2. h-1 with an improved salt rejection of 98.2%. Therefore, these nanosheets showed that they can partially solve the trade-off between water permeability and salt rejection, which is a serious challenge in RO membranes. Also, the membranes containing quasi-MXene showed good resistance against fouling by humic acid. This research can be a scalable development in making high-performance membranes.

Ongoing Progress on Pervaporation Membranes for Ethanol Separation

Ethanol, a versatile chemical extensively employed in several fields, including fuel production, food and beverage, pharmaceutical and healthcare industries, and chemical manufacturing, continues to witness expanding applications. Consequently, there is an ongoing need for cost-effective and environmentally friendly purification technologies for this organic compound in both diluted (ethanol-water-) and concentrated solutions (water-ethanol-). Pervaporation (PV), as a membrane technology, has emerged as a promising solution offering significant reductions in energy and resource consumption during the production of high-purity components. This review aims to provide a panorama of the recent advancements in materials adapted into PV membranes, encompassing polymeric membranes (and possible blending), inorganic membranes, mixed-matrix membranes, and emerging two-dimensional-material membranes. Among these membrane materials, we discuss the ones providing the most relevant performance in separating ethanol from the liquid systems of water-ethanol and ethanol-water, among others. Furthermore, this review identifies the challenges and future opportunities in material design and fabrication techniques, and the establishment of structure-performance relationships. These endeavors aim to propel the development of next-generation pervaporation membranes with an enhanced separation efficiency.

Can MXene be the Effective Nanomaterial Family for the Membrane and Adsorption Technologies to Reach a Sustainable Green World?

Environmental pollution has intensified and accelerated due to a steady increase in the number of industries, and exploring methods to remove hazardous contaminants, which can be typically divided into inorganic and organic compounds, have become inevitable. Therefore, the development of efficacious technology for the separation processes is of paramount importance to ensure the environmental remediation. Membrane and adsorption technologies garnered attention, especially with the use of novel and high performing nanomaterials, which provide a target-specific solution. Specifically, widespread use of MXene nanomaterials in membrane and adsorption technologies has emerged due to their intriguing characteristics, combined with outstanding separation performance. In this review, we demonstrated the intrinsic properties of the MXene family for several separation applications, namely, gas separation, solvent dehydration, dye removal, separation of oil-in-water emulsions, heavy metal ion removal, removal of radionuclides, desalination, and other prominent separation applications. We highlighted the recent advancements used to tune separation potential of the MXene family such as the manipulation of surface chemistry, delamination or intercalation methods, and fabrication of composite or nanocomposite materials. Moreover, we focused on the aspects of stability, fouling, regenerability, and swelling, which deserve special attention when the MXene family is implemented in membrane and adsorption-based separation applications.

Electric field modulated water permeation through laminar Ti3C2Tx MXene membrane

Controlling water transport is central to a wide range of water-related energy and environment issues. In particular, enhancing the water permeation is highly demanded for practical membrane applications such as water treatment. In this work, we demonstrate that the water permeation through the laminar and electrically conductive MXene membrane can be facilely modulated with electric field. By applying a negative voltage of a few volts on the membrane, the water permeation rate was enhanced by 70 times. Density functional theory calculations and experimental characterizations suggest that the enhancement arises from the enhanced water/MXene interaction under electric field, which manifests itself as enhanced hydrophilicity of the MXene nanosheets. Along with the facilitated water permeation, the rejection rate to dyes of the membrane was kept at a relatively high level, which was 93.1% to Congo red and 94.8% to aniline blue under an applied voltage of -3 V, showing the potential for dye separation and water purification. Considering that there has been increasing interest in utilizing MXene for separations and water treatment, this work should inspire a range of future works in the related area to improve the membrane performance with external stimuli.