The Synthesis of the P/N-Type NdCoO3/g-C3N4 Nano-Heterojunction as a High-Performance Photocatalyst for the Enhanced Photocatalytic Degradation of Pollutants under Visible-Light Irradiation

DFT Studies of the Photocatalytic Properties of MoS2-Doped Boron Nitride Nanotubes for Hydrogen Production

This study investigated the photocatalytic properties of MoS2-doped boron nitride nanotubes (BNNTs) for overall water splitting using popular density functional theory (DFT). Calculations of the structural, mechanical, electronic, and optical properties of the investigated systems were performed using both the generalized gradient approximation and the GW quasi-particle correction methods. In our calculations, it was observed that only (10, 10) and (12, 12) single-walled BNNTs (SWBNNTs) turned out to be stable toward MoS2 doping. Electronic property calculations revealed metallic behavior of (10, 10)-MoS2-doped SWBNNTs, while the band gap of (12, 12) SWBNNT was narrowed to 2.5 eV after MoS2 doping, which is within the obtained band gaps for other photocatalysts. Hence, MoS2 influences the conduction band of pure BNNT and improves its photocatalytic properties. The water-splitting photocatalytic behavior is found in (12, 12) MoS2-doped SWBNNT, which showed higher water oxidation (OH-/O2) and reduction (H+/H2) potentials. In addition, optical spectral calculations showed that MoS2-doped SWBNNT had an optical absorption edge of 2.6 eV and a higher absorption in the visible region. All of the studied properties confirmed MoS2-doped SWBNNT as a better candidate for next-generation photocatalysts for hydrogen evolution through the overall water-splitting process.

Novel Design of Perovskite-Structured Neodymium Cobalt Oxide Nanoparticle-Embedded Graphene Oxide Nanocomposites as Efficient Active Materials of Energy Storage Devices

In recent years, electrochemical supercapacitors are expected to represent the future of energy storage device technology. Specifically, the excellent electrochemical performance with long cycle life, high energy, and power density is considered an essential criterion for commercial applications. Herein, we constructed a novel composite of neodymium cobalt oxide-encapsulated graphene oxide nanocomposite (NCO/GO) via a simple and robust method for a symmetric supercapacitor (SSC) device. The prepared samples were securitized by X-ray diffraction, Fourier transform infrared spectroscopy, Raman, X-ray photoelectron spectroscopy, field emission scanning electron microscopy, high-resolution transmission electron microscopy, and Brunauer-Emmett-Teller analysis. The as-synthesized NCO/GO is deposited on nickel foam (NF) and used as a supercapacitor electrode (NCO/GO/NF), which exhibits superior specific capacitance (Cs) of 1080.92 F g-1 at 1 A g-1 and fantastic cycling life with ∼89.42% retention after 10,000 cycles at 10 A g-1 in 1.0 M KOH aqueous electrolyte. A tremendous electrochemical performance of the hybrid nanocomposite electrode is obtained from the good redox activity and synergistic effects of the NCO spherical-like nanoparticles combined with the GO nanosheets. Furthermore, the assembled SSC device delivers significantly enhanced power density (932.93 Wh kg-1) and energy density (210.42 mWh kg-1). Moreover, the SSCs exhibit excellent cycling stability with ∼82.19% capacity retaining over 10,000 charge/discharge cycles. Remarkably, a 1.8 V red light-emitting diode (LED) can be lit up for more than 10 min by series connection SSCs. Thus, the obtained results indicated that the NCO/GO/NF//NCO/GO/NF symmetric device has a robust and cost-effective electrode material for high-performance supercapacitor systems.

Rational Design of Monolithic g-C3N4 with Floating Network Porous-like Sponge Monolithic Structure for Boosting Photocatalytic Degradation of Tetracycline under Simulated and Natural Sunlight Illumination

In order to solve the problems of powder g-C₃N₄ catalysts being difficult to recycle and prone to secondary pollution, floating network porous-like sponge monolithic structure g-C₃N₄ (FSCN) was prepared with a one-step thermal condensation method using melamine sponge, urea, and melamine as raw materials. The phase composition, morphology, size, and chemical elements of the FSCN were studied using XRD, SEM, XPS, and UV-visible spectrophotometry. Under simulated sunlight, the removal rate for 40 mg·L^-1 tetracycline (TC) by FSCN reached 76%, which was 1.2 times that of powder g-C₃N₄. Under natural sunlight illumination, the TC removal rate of FSCN was 70.4%, which was only 5.6% lower than that of a xenon lamp. In addition, after three repeated uses, the removal rates of the FSCN and powder g-C₃N₄ samples decreased by 1.7% and 2.9%, respectively, indicating that FSCN had better stability and reusability. The excellent photocatalytic activity of FSCN benefits from its three-dimensional-network sponge-like structure and outstanding light absorption properties. Finally, a possible degradation mechanism for the FSCN photocatalyst was proposed. This photocatalyst can be used as a floating catalyst for the treatment of antibiotics and other types of water pollution, providing ideas for the photocatalytic degradation of pollutants in practical applications.