Determining β-lactam antibiotics in aquaculture products by modified QuECHERS combined with ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS)

A sensitive lateral flow immunoassay relying on time-resolved fluorescent microspheres immune probe for determination of ceftiofur and its metabolite

Ceftiofur (CEF) is an antimicrobial agent with high efficiency and low toxicity, desfuroylceftiofur is its main metabolite, but they are also have potential harm to human health. In this study, ceftiofur was combined with carrier proteins to get artificial antigens. A specific antibody (pAb) against CEF and desfuroylceftiofur was prepared. A sensitive and rapid paper-based sensor relying on time-resolved fluorescent microspheres (TRFMs) immune probes was developed, which were time-resolved fluorescent immunochromatographic strips (TRFMs-LFIA). The concentrations of T line and C line, activated pH, antibody volume and probe volume were optimized. Quantitative limits of detection (qLODs) of TRFMs-LFIA for CEF and desfuroylceftiofur were 0.97 ng/mL and 0.41 ng/mL, respectively. And 50 % inhibiting concentrations (IC50) were 12.92 ng/mL and 12.58 ng/mL, respectively. Pretreatment procedures of real samples were simple and rapid. Detection time of TRFMs-LFIA strip was 15 min. Qualitative analysis of CEF and desfuroylceftiofur was achieved under a UV light, quantitative analysis was implemented with a fluorescent immunoassay analyzer. The average recovery rates ranged from 91.4 % to 107.7 % and corresponding coefficients of variation (CV) was 1.5%-9.7 %. Concentration levels of artificially-spiked samples were measured by TRFMs-LFIA and compared with detection results of High performance liquid chromatography (HPLC), which showed a good accordance. These results indicated that the proposed assay can provide an effective strategy for on-site detection of CEF and desfuroylceftiofur simultaneously.

Targeting Staphylococcal Cell-Wall Biosynthesis Protein FemX Through Steered Molecular Dynamics and Drug-Repurposing Approach

Staphylococcus aureus-mediated infection is a serious threat in this antimicrobial-resistant world. S. aureus has become a "superbug" by challenging conventional as well as modern treatment strategies. Nowadays, drug repurposing has become a new trend for the discovery of new drug molecules. This study focuses on evaluating FDA-approved drugs that can be repurposed against S. aureus infection. Steered molecular dynamics (SMD) has been performed for Lumacaftor and Olaparib against staphylococcal FemX to understand their binding to the active site. A time-dependent external force or rupture force has been applied to the ligands to calculate the force required to dislocate the ligand from the binding pocket. SMD analysis indicates that Lumacaftor has a high affinity for the substrate binding pocket in comparison to Olaparib. Umbrella sampling exhibits that Lumacaftor possesses a higher free energy barrier to displace it from the ligand-binding site. The bactericidal activity of Lumacaftor and Olaparib has been tested, and it shows that Lumacaftor has moderate activity along with biofilm inhibition potential (MIC value with conc. 128 μg/mL). Pharmacokinetic and toxicology evaluations indicate that Lumacaftor has higher pharmacokinetic potential with lower toxicity. This is the first experimental report where staphylococcal FemX has been targeted for the discovery of new drugs. It is suggested that Lumacaftor may be a potential lead molecule against S. aureus.

Distribution and drivers of antibiotic resistance genes in brackish water aquaculture sediment

Brackish water aquaculture has brought numerous economic benefits, whereas anthropogenic activities in aquaculture may cause the dissemination of antibiotic resistance genes (ARGs) in brackish water sediments. The intricate relationships between environmental factors and microbial communities as well as their role in ARGs dissemination in brackish water aquaculture remain unclear. This study applied PCR and 16S sequencing to identify the variations in ARGs, class 1 integron gene (intI1) and microbial communities in brackish water aquaculture sediment. The distribution of ARGs in brackish water aquaculture sediment was similar to that in freshwater aquaculture, and the sulfonamide resistance gene sul1 was the indicator of ARGs. Proteobacteria and Firmicutes were the dominant phyla, and Paenisporosarcina (p_ Firmicutes) was the dominant genus. The results of correlation, network and redundancy analysis indicated that the microbial community in the brackish water aquaculture sediment was function-driven. The neutral model and variation partitioning analysis were used to verify the ecological processes of the bacterial community. The normalized stochasticity ratio showed that pond bacteria community was dominated by determinacy, which was affected by aquaculture activities. The total nitrogen and organic matter influenced the abundance of ARGs, while Proteobacteria and Thiobacillus (p_Proteobacteria) were the key antibiotic-resistant hosts. Our study provides insight into the prevalence of ARGs in brackish water aquaculture sediments, and indicates that brackish water aquaculture is a reservoir of ARGs.

Development and Validation for Quantification of Cephapirin and Ceftiofur by Ultraperformance Liquid Chromatography with Triple Quadrupole Mass Spectrometry

Cross contamination of β-lactams is one of the highest risks for patients using pharmaceutical products. Penicillin and some non-penicillin β-lactams may cause potentially life-threatening allergic reactions. The trace detection of β-lactam antibiotics in cleaning rinse solutions of common reactors and manufacturing aids in pharmaceutical facilities is very crucial. Therefore, the common facilities adopt sophisticated cleaning procedures and develop analytical methods to assess traces of these compounds in rinsed solutions. For this, a highly sensitive and reproducible ultra-performance liquid chromatography with triple quadrupole mass spectrometry (UHPLC-MS/MS) method was developed for the analysis of Cephapirin and Ceftiofur. As per the FDA guidelines described in FDA-2011-D-0104, the contamination of these β-lactam antibiotics must be regulated. The analysis was performed on an XBridge C18 column with 100 mm length, 4.6 mm diameter, and 3.5 µm particle size at an oven temperature of about 40 °C. The mobile phase was composed of 0.15% formic acid in water and acetonitrile as mobile phases A and B, and a flow rate was set to 0.6 mL/min. The method was validated for Cephapirin and Ceftiofur. The quantification precision and accuracy were determined to be the lowest limit of detection 0.15 parts per billion (ppb) and the lowest limit of quantification 0.4 ppb. This method was linear in the range of 0.4 to 1.5 ppb with the determination of coefficient (R2 > 0.99). This sensitive and fast method was fit-for-purpose for detecting and quantifying trace amounts of β-lactam contamination, monitoring cross contamination in facility surface cleaning, and determining the acceptable level of limits for regulatory purposes.

Recent Trends in the Development of Carbon-Based Electrodes Modified with Molecularly Imprinted Polymers for Antibiotic Electroanalysis

Antibiotics are antibacterial agents applied in human and veterinary medicine. They are also employed to stimulate the growth of food-producing animals. Despite their benefits, the uncontrolled use of antibiotics results in serious problems, and therefore their concentration levels in different foods as well as in environmental samples were regulated. As a consequence, there is an increasing demand for the development of sensitive and selective analytical tools for antibiotic reliable and rapid detection. These requirements are accomplished by the combination of simple, cost-effective and affordable electroanalytical methods with molecularly imprinted polymers (MIPs) with high recognition specificity, based on their “lock and key” working principle, used to modify the electrode surface, which is the “heart” of any electrochemical device. This review presents a comprehensive overview of MIP-modified carbon-based electrodes developed in recent years for antibiotic detection. The MIP preparation and electrode modification procedures, along with the performance characteristics of sensors and analytical methods, as well as the applications for the antibiotics’ quantification from different matrices (pharmaceutical, biological, food and environmental samples), are discussed. The information provided by this review can inspire researchers to go deeper into the field of MIP-modified sensors and to develop efficient means for reliable antibiotic determination.