Demineralised human dentine matrix stimulates the expression of VEGF and accelerates the bone repair in tooth sockets of rats

Assessment of Changes in the Outcome of Autogenous Tooth Grafts Over Time: A Clinical Study Evaluating Periodontal Healing in Bone Defects After Lower Third Molar Removal

BACKGROUND

The removal of impacted lower third molars (ILTMs) is associated with bone defects in the distal area of second molars. Different methods have been described to minimize these defects.

PURPOSE

The primary objective was to assess changes in probing depth (PD) over time (up to 36 months) between test (grafted) and control (ungrafted) groups; the graft was obtained from the extracted ILTM.

STUDY DESIGN, SETTING, SAMPLE

This split-mouth randomized clinical trial was conducted at the Postgraduate Course in Oral Surgery of the Faculty of Dentistry of the Complutense University of Madrid. Adult patients requiring bilateral ILTM extraction with adjacent second molars were recruited, excluding pregnant/lactating women, patients in treatment with nonsteroidal anti-inflammatory drugs and patients with periodontal diseases.

PREDICTOR/EXPOSURE/INDEPENDENT VARIABLE

The predictor variable was the graft technique. The bone defect after ILTM removal was treated with autogenous tooth graft (ATG) in the test group, leaving the control group ungrafted.

MAIN OUTCOME VARIABLE

PD on the distobuccal, distomedial, and distolingual surfaces was recorded in both groups and averaged at baseline (T0), 3 (T1), 6 (T2), and 36 months (T3) postoperatively.

COVARIATES

Sex, age, surgical time, ILTM situation and position between groups were assessed.

ANALYSES

ANOVA repeated measures for comparisons between groups and the Friedman test for comparisons within the groups over time were applied. Statistical significance was established with a confidence interval of 95% (P < .05).

RESULTS

The sample comprised 22 patients (6 males, 16 females) with a mean age of 21.68 ± 2.19 years; 44 ILTM extractions were performed. Statistically significant differences in PD average were found between groups (P < .001, 95% confidence interval) at 3 (1.63 ± 0.29), 6 (1.76 ± 0.3), and 36 months (1.74 ± 0.36). Reductions from T0 to T3 of 2.74 ± 0.28 (P < .001) and 0.54 ± 0.3 (P = .43) were observed in test and control groups, respectively.

CONCLUSION AND RELEVANCE

ATG placed on the distal surface of lower second molars and almost completely filling the extraction socket improved PD 3, 6 and 36 months after ILTM. Furthermore, no significant changes in PD were observed over time; no major complications occurred. ATG appears to be a viable alternative graft material for this procedure.

Evaluation and comparison of autologous particulate dentin with demineralized freeze dried bone allograft in ridge preservation procedures - a prospective clinical study

OBJECTIVES

To compare effectiveness of Autologous Particulate Dentin (APD) with Demineralized Freeze-Dried Bone Allograft (DFDBA) in ridge preservation, using radiographic and clinical parameters.

MATERIALS AND METHODS

Thirty subjects with indication of mandibular posterior teeth extraction were randomly assigned to either test or control group. After atraumatic extraction, ridge preservation was performed using APD or DFDBA mixed with i-PRF in test and control groups respectively. Both groups had sockets sealed with A-PRF membrane. Clinical parameters (plaque, gingival and healing indices) and radiographic parameters (vertical ridge height, horizontal ridge width) were assessed at baseline and 6 months using CBCT. Statistical analysis was performed using an independent t-test to compare clinical and radiographic parameters between the groups.

RESULTS

Both groups had significant decreases in ridge dimensions over 6 months (p < 0.001). The test group showed less reduction in ridge dimensions than control group at 6 months (p < 0.001). Mean change in vertical height was not significant (1.37 ± 1.32, 1.7311 ± 0.563), but in horizontal ridge width (1.3120 ± 1.13, 1.8093 ± 1.16) was significantly different between test and control groups respectively. There was no statistical difference in clinical parameters between the groups at 6 months (p > 0.001).

CONCLUSIONS

APD grafts resulted in significant improvements in radiographic parameters, specifically in vertical ridge height and horizontal ridge width, compared to DFDBA group.

CLINICAL RELEVANCE

Autologous particulate dentin is a promising, versatile substitute for regenerative procedures. While more research on its long-term efficacy and application is needed, current evidence suggests it could significantly improve patient care and outcomes.

How effective is dentin autograft for socket preservation and implant site preparation: A systematic review protocol

Background

Socket preservation is a surgical procedure aimed at preserving the dimensions of the alveolar bone following tooth extraction. It is performed by filling the extraction socket with bone graft material with or without a barrier membrane. Recently, dentine obtained from extracted teeth has been tried as an autograft for socket preservation. Studies have compared the use of dentin to other bone grafts, however, systematic reviews evaluating the efficacy of dentin for socket preservation are limited. Hence, this systematic review protocol is proposed to generate evidence on the efficacy of dentin as a viable alternative to other bone graft materials for socket preservation.

Methods

This systematic review protocol was prepared according to the Methodological Expectations of the Cochrane Intervention Reviews (MECIR) guidelines. It will be conducted using the Cochrane Handbook for Systematic Review of Interventions. PubMed, Scopus, Web of Science, EMBASE, Epistemonikos, Cochrane Central, and EBSCO databases and clinical trial registries, will be searched for all randomized controlled trials (RCTs) and non-randomized studies that have used autologous dentin graft (either in particulate/putty, or/matrix form) for socket preservation. The radiographic and clinical assessment of bone and soft tissue healing of the preserved sockets along with patient-related outcomes following surgery will be assessed. The risk of bias assessment of the RCTs and Non-RCTs will be assessed using the 'Cochrane Risk of Bias assessment tool (ROB II) and ROBINS-I respectively. The certainty of evidence will be assessed by the GRADE approach.

Discussion

This evidence is important for dental clinicians and the public to make an informed decision when choosing graft material for socket preservation. The extracted teeth are considered biological waste; however, this evidence provides scope for using a less invasive autograft for bone regenerative procedures.

Systematic review registration

PROSPERO: CRD42021201958 (Registered on 15/02/2021).

Stimulation of Osteogenic Activity of Autologous Teeth Hard Tissues as Bone Augmentation Material

The issue of bone volume loss is playing an increasing role in bone tissue engineering. Research has focused on studying the preparation and use of different types of human or xenogenic materials and their osteogenic properties. An alternative source for this purpose could be autologous extracted teeth. The simple preparation protocol, minimal immune response, and rapid organizing of the newly formed bone with optimal mechanical properties predispose autologous hard teeth tissues (HTTs) as a promising material suitable in the indication of augmentation of maxillary and mandible defects, comparable to other high-end augmentation materials. The aim of this study was to experimentally evaluate the osteogenic potential of ground native autologous HTTs prepared by different demineralization procedures, aimed at potentiating the osteoinductive and osteoconductive properties of their organic components. The results indicate that the most effective preparation process for HTT stimulation is the application of Cleanser for 10 min followed by exposure to 0.6 N HCl for 5 min with a wash in phosphate-buffered saline solution.

Combination adipose-derived mesenchymal stem cells-demineralized dentin matrix increase bone marker expression in periodontitis rats

Background

Periodontal disease is common in both developed and developing countries and affects around 20-50% of the global population, especially in adolescents, adults and the elderly is a public health problem. ADMSCs have the advantage of regenerating damaged tissue with high quality. DDM in the form of slices can improve healing in the mandibular sockets of molar teeth. The combination of ADMSC-DDM is expected to accelerate bone regeneration.

Objectives

To analyze the combination of ADMSCs-DDM at increasing bone marker expression in periodontitis rats.

Methods

This research is experimental with a randomized control group post-test-only design. A total of 50 male Wistar rats were divided into four groups: 1) normal group (K); 2) CP model (K + ); 3) CP model and treated with DDM scaffold therapy (K(s)); 4) CP model and treated with ADMSCs-DDM combination therapy (K(sc)). Making a CP model with injected LPS P. gingivalis into interproximal gingiva of the right first and second lower molars. The in vivo research stage was the implantation of the DDM scaffold and the ADMSCs-DDM combination in the rat periodontal pocket. Rats were euthanized on days 7, 14, and 28, and immunohistochemistry of STRO-1, RUNX-2, OSX, COL-I, and OCN was performed. DDM scaffolds are made in 10%, 50% and 100% concentrations for MTT testing. Statistical results were analyzed with Kruskal-Wallis and Mann-Whitney tests.

Results

The results of the MTT scaffold DDM were significant in the 10%, 50%, and 100% dilution groups (p < 0.05). The results showed there was a substantial difference in the expression of STRO-1 between the study groups (p < 0.05). The (K(sc)) was significantly higher than the (K) in RUNX-2 expression (p < 0.05). OSX expression showed significant results between study groups (p < 0.05). The expression of OCN and COL-I showed a significant difference in all study groups on day 28, where the (K(sc)) was higher than the (K) (p < 0.05).

Conclusions

Administration of the ADMSCs-DDM combination can accelerate alveolar bone regeneration on day 28. There is a mechanism of alveolar bone regeneration through the STRO-1, RUNX-2, OSX, and the COL-I pathway in periodontitis models.

Alveolar ridge preservation in sockets with severe periodontal destruction using autogenous partially demineralized dentin matrix: A randomized controlled clinical trial

BACKGROUND

The preservation and reconstruction of alveolar ridge volume in extraction sockets of molars affected by severe periodontitis is a critical challenge that requires clinical attention.

PURPOSE

This randomized controlled clinical trial was designed to evaluate the efficiency of autogenous partially demineralized dentin matrix (APDDM) for alveolar ridge preservation (ARP) in severely periodontally compromised sockets compared to spontaneous healing (SH) on radiographic and histomorphometric outcomes.

MATERIALS AND METHODS

Thirty-two patients with 32 periodontally compromised molars were randomized into either the test group, which received ARP using APDDM covered with a collagen sponge, or the control group, which underwent SH. Linear and volumetric changes were assessed using superimposed cone-beam computed tomography (CBCT) acquired pre-extraction and after a 4-month healing time. Histomorphometric evaluation was performed on trephine cores harvested during implant placement.

RESULTS

All sites healed uneventfully. The ridge width at 1 mm apical to the bone crest increased by 5.03, 4.50, and 5.20 mm in the mesial, middle, distal area in the APDDM group, while decreasing by -1.98, -2.19, and -1.98 mm in the SH group, respectively (p < 0.05). The height increase of the central bone was significantly higher in the APDDM group than in the SH group (p < 0.05). The height decrease of the buccal (mesial, middle, distal) bone plate was lower in the APDDM group than in the SH group (p < 0.05). After a 4-month healing time, bone volume increased by 37.07% in the APDDM group and by only 2.33% in the SH group (p < 0.05). Histomorphometric analysis revealed that APDDM particles were surrounded by newly formed bone, with partially absorbed residual APDDM materials observed. New bone, APDDM remnants, and connective tissue occupied 39.67 ± 8.28%, 23.66 ± 9.22%, and 36.67 ± 17.05% of the areas in the APDDM group, respectively.

CONCLUSIONS

ARP using APDDM was effective, resulting in a significant increase in both linear and volumetric changes in severely periodontally compromised extraction sockets compared to SH. These findings suggest that APDDM may serve as a promising new clinical option for the reconstruction of alveolar ridge dimensions.

Biological Evaluation of the Osteoinductive Potential of Dry Teeth after Chemical Demineralization Treatment Using the Tooth Transformer Device

Several studies have already demonstrated the biocompatibility of a tooth as a grafting material in the regeneration of bone tissue, showing its osteoconductive potential, while no studies have verified whether the osteoinductive potential of a tooth remains constant or is altered after its treatment with the Tooth Transformer (TT) device. The aim of the study was to demonstrate that the treatment with the TT device did not alter the osteoinductivity of an extracted tooth that was stored dry. Twelve extracted human teeth were collected from real patients. Caries, tartar and filling materials were removed from each tooth; each tooth was coarsely cut and stored at room temperature (RT) until use. Each sample was shredded, demineralized and disinfected, using the TT device. Protein extraction was carried out for each sample, and Western Blot analysis was performed to test the presence of mineralization protein LIM-1 and transforming growth factor-β. The presence of the human Bone Morphogenetic Protein 2 (BMP-2) and human collagen Type I (COL-I) was found in dry tooth samples processed with the TT device and subjected to Enzyme-Linked Immunosorbent Assay (ELISA) testing. The treatment of chemical demineralization using the TT device does not alter the osteoinductive potential of a dry tooth.

Autologous tooth bone graft block compared with advanced platelet-rich fibrin in alveolar ridge preservation: A clinico-radiographic study

Objectives

To determine the clinico-radiographic efficiency of partially demineralized dentin matrix block (PDDM block), a mixture of PDDM with advanced-platelet-rich fibrin+ (A-PRF+) and injectable platelet-rich fibrin versus A-PRF+ alone in alveolar socket preservation.

Materials and Methods

Sixteen molar teeth indicated for extraction were randomly assigned into two groups. For the test group, sockets were packed with PDDM block and control group, with A-PRF+ plug alone. Clinical and radiographic cone-beam computed tomography methods were used to assess the horizontal and vertical ridge dimensional changes at baseline and 4 months.

Results

Clinically, the mid buccal and palatal crestal height (10.25 ± 0.86 and 9.75 ± 0.28 mm) and alveolar ridge width (11.37 ± 0.25 mm) were significantly higher in the test group as compared to the control group, 4 months after tooth extraction (P < 0.01). Radiographically, there was improved apposition and nonsignificant resorption for the test group in ridge height and width, whereas statistically significant higher resorption was seen in the control group at 4 months.

Conclusion

The application of the PDDM block demonstrated efficacy in maintaining the dimensions of the extraction socket when compared to A-PRF+ alone. This autologous and immune-free regenerative biomaterial is widely obtainable, offering a glimpse into the potential of next-generation biofuels for regeneration.

Demineralized dentin matrix promotes gingival healing in alveolar ridge preservation of premolars extracted for orthodontic reason: a split-mouth study

Objective

The purpose of this study was to prospectively evaluate the efficacy of a demineralized dentin matrix (DDM) in decreasing the initial inflammatory response of the gingiva and facilitating the repair and regeneration of soft tissue in alveolar ridge preservation.

Methods

This clinical study employed a split-mouth design. Fourteen patients with a total of forty-four sites underwent extraction and alveolar ridge preservation (ARP) procedures. A Bilaterally symmetrical extraction operation were conducted on the premolars of each patient. The experimental group received DDM as a graft material for ARP, while the control group underwent natural healing. Within the first month postoperatively, the pain condition, color, and swelling status of the extraction sites were initially assessed at different time points Subsequently, measurements were taken for buccal gingival margin height, buccal-lingual width, extraction socket contour, and the extraction socket area and healing rate were digitally measured. Additionally, Alcian Blue staining was used for histological evaluation of the content during alveolar socket healing.

Results

Both groups experienced uneventful healing, with no adverse reactions observed at any of the extraction sites. The differences in VAS pain scores between the two groups postoperatively were not statistically significant. In the early stage of gingival tissue healing (3 days postoperatively), there were statistically significant differences in gingival condition and buccal gingival margin height between the two groups. In the later stage of gingival tissue healing (7, 14, and 30 days postoperatively), there were statistically significant differences in buccal-lingual width, extraction socket healing area, and healing rate between the two groups. Furthermore, the histological results from Alcian Blue staining suggested that the experimental group may play a significant role in promoting gingival tissue healing, possibly by regulating inflammatory responses when compared to the control group.

Conclusion

The application of DDM in alveolar ridge preservation has been found to diminish initial gingival inflammation after tooth extraction. Additionally, it has shown the ability to accelerate early gingival soft tissue healing and preserve its anatomical contour.

Clinical trial registration

chictr.org.cn, identifier ChiCTR2100050650.

The healing capacity and osteogenesis pattern of demineralized dentin matrix (DDM)-fibrin glue (FG) compound

Demineralized dentin matrix (DDM) is an osteoconductive and osteoinductive material that has been successfully used in sinus floor augmentation and alveolar ridge augmentation in clinical applications. It releases bone morphogenetic proteins (BMPs) and other growth factors, making DDM a suitable grafting material. However, the granular particle of DDM makes it difficult to anchor into the bone defect area. The aim of this study was to investigate the biological effects and osteoinductivity of the combination of DDM and Fibrin Glue (FG) at an optimal ratio on bone healing from a critical bone defect in an animal model. The mouse osteoblastic cell line (MC3T3-E1) was co-cultured with various ratios of DDM and FG to examine their effects on osteoblast proliferation and differentiation, as indicated by alkaline phosphatase (ALP) activity, osteocalcin (OC) production and mineralized nodules formation. The optimal ratio was then chosen for further study with a rabbit calvarial defective model, in which they were implanted with DDM or DDM-FG1 (1 g: 0.1 ml) and DDM-FG2 (1 g: 0.5 ml) compounds, or left blank for 2, 4, 8 and 12 weeks to investigate soft tissue and new bone regeneration. Micro-CT and histology analysis were used to evaluate the total grafting properties according to the different healing periods. The result from in vitro studies demonstrated that the ratio of 1:0.1 induced more ALP activity and mineralized nodules, while the ratio of 1: 0.5 (DDM-FG combined) induced more osteocalcin (OC) at specific time points. In the animal model, the 3D new bone volume in all DDM-FG treatment groups was significantly greater than that in the blank group at 2, 4, 8 and 12 weeks. Furthermore, the new bone volume was greater in DDM-FG2 when compared to the other groups during the early weeks of the healing period. In histological analysis, clusters of osteoblasts were formed adjacent to the DDM particles, and newly formed bone was observed in all groups, suggesting an osteoinductive property of DDM. Moreover, the greater new collagen synthesis observed at 4 weeks suggested that early bone healing was induced in the DDM-FG2 group. This study demonstrated that at an optimal ratio, the DDM-FG compound enhances osteogenic activities and bone regeneration.

Osteogenic Potential of Autologous Dentin Graft Compared with Bovine Xenograft Mixed with Autologous Bone in the Esthetic Zone: Radiographic, Histologic and Immunohistochemical Evaluation

This prospective, randomized, controlled clinical trial reports clinical, radiographic, histologic and immunohistochemical results of autologous dentin graft (ADG) and its comparison with a mixture of bovine xenograft with autologous bone (BX+AB). After tooth extraction in the esthetic zone of maxilla, the alveolar ridge of 20 patients in the test group was augmented with ADG, while 17 patients in the control group received the combination of BX+AB. Cone beam computed tomography (CBCT) was performed before tooth extraction and after 4 months when a total of 22 bone biopsies were harvested and subjected to histological and immunohistochemical analysis. Radiological analysis showed comparable results of bone dimension loss in both groups. Quantitative histologic analysis showed comparable results with no statistically significant differences between the groups. Immunohistochemical staining with TNF-α and BMP-4 antibodies revealed immunopositivity in both groups. A statistically significant difference between the groups was found in the intensity of TNF-α in the area of newly formed bone (p = 0.0003) and around remaining biomaterial particles (p = 0.0027), and in the intensity of BMP-4 in the area around biomaterial particles (p = 0.0001). Overall, ADG showed biocompatibility and achieved successful bone regeneration in the esthetic zone of the maxilla similar to BX+AB.

Comparing the effect of demineralized versus hybrid dentin matrices on inducing bone regeneration in New Zealand white rabbits' Mandibular defect

OBJECTIVES

The aim of this study was to compare the effect of using demineralized dentin matrix (DDM) versus hybrid dentin matrices; Demineralized and undemineralized dentin particles (DDM +UDDM) on inducing bone regeneration in mandibular defects.

DESIGN

The study was conducted on fifty adult New Zealand rabbits, twenty for preparation of experimental materials and thirty for surgical procedures. They were randomly assigned into 3 equal groups as follow one control group: no treatment and two experimental groups including demineralized group: treated with DDM only; and hybrid group: treated with a hybrid of (50% DDM+50% UDD). A rounded critical size defect (10 mm in diameter- 5 mm in depth) was created in the body of mandible. After 3- and 6-weeks post-surgery, the bone regeneration was evaluated by light microscope, scanning electron microscope and histomorphometry.

RESULTS

Histological, histomorphometrical observation and SEM revealed that both dentin matrices had largely resorbed and induced new bone formation at both experimental groups compared to the control group, with statistically higher percentage of new bone formation in the hybrid group.

CONCLUSION

We concluded that although both dentin matrices induced new bone formation; however, hybrid dentin matrix yielded better results compared to DDM group.

Autogenous particulated dentin for alveolar ridge preservation. A systematic review

PURPOSE

This review aimed to investigate the clinical outcomes of autogenous particulated dentin (APD) used for alveolar ridge preservation (ARP), evaluating volume gain, histologic/histomorphometric data, and associated complications.

MATERIAL AND METHODS

The review followed PRISMA guidelines and was registered in the International Prospective Register of Systematic Reviews (PROSPERO). An automated search was made in four databases (Medline/Pubmed, Scopus, Web of Science, and Cochrane Library) supplemented by a manual search for relevant clinical articles published before March 10th, 2022. The review included human studies of at least four patients in which extraction and subsequent ARP were performed in a single surgery. Both comparative studies and studies that assessed ARP with APD exclusively were admitted. The quality of evidence was assessed with the Cochrane bias assessment tool, the Newcastle-Ottawa Quality Assessment Scale, and the Joanna Briggs Institute Critical Appraisal tool.

RESULTS

Eleven studies fulfilled the inclusion criteria and were included for descriptive analysis, with a total of 215 patients, and 337 alveoli preserved by APD, spontaneous healing (blood clot), or other bone substitutes, obtaining comparatively less vertical and horizontal resorption when APD was used.

CONCLUSIONS

After dental extraction, autogenous dentin was effective in terms of volume maintenance, showing promising results in histologic/histomorphometric analysis, and a low complication rate. Nevertheless, few comparative studies with comparable parameters have been published and so more research providing long-term data is needed to confirm these findings.

Treated Dentin Matrix in Tissue Regeneration: Recent Advances

Tissue engineering is a new therapeutic strategy used to repair serious damage caused by trauma, a tumor or other major diseases, either for vital organs or tissues sited in the oral cavity. Scaffold materials are an indispensable part of this. As an extracellular-matrix-based bio-material, treated dentin matrixes have become promising tissue engineering scaffolds due to their unique natural structure, astonishing biological induction activity and benign bio-compatibility. Furthermore, it is important to note that besides its high bio-activity, a treated dentin matrix can also serve as a carrier and release controller for drug molecules and bio-active agents to contribute to tissue regeneration and immunomodulation processes. This paper describes the research advances of treated dentin matrixes in tissue regeneration from the aspects of its vital properties, biologically inductive abilities and application explorations. Furthermore, we present the concerning challenges of signaling mechanisms, source extension, individualized 3D printing and drug delivery system construction during our investigation into the treated dentin matrix. This paper is expected to provide a reference for further research on treated dentin matrixes in tissue regeneration and better promote the development of relevant disease treatment approaches.

An In Vitro Study of the Effects of Crocin on the Modulation of DSPP, VEGF-A, HLA-G5, STAT3 and CD200 Expression in Human Dental Pulp Stem Cells

Dental pulp stem cells (DPSCs) have been recommended as promising candidate for cell-based therapeutic applications due to high potentials in tissue repair/regeneration and modulation of immune responses. The gene expression change strategy by natural plant enhancers is an available opportunity to improve the stemness properties of these cells. The objective of this research was the evaluation of Crocin effects (saffron plant's bioactive compound) on immunoregulation and tissue regeneration-related biomarkers expression in human DPSCs. Based on the results of cell viability assay, application of 400 μM and lower concentrations of Crocin had no toxic effects on DPSCs; however, the time-dependent cytotoxic effects were observed at higher concentrations. This study, probably for the first time, detected the surface expression of CD200 in DPSCs with a slight time-dependent upward trend and reported that treatment with Crocin could increase expression of this macromolecule up to many times over. Also, it revealed that this carotenoid significantly led to the time-dependent upregulation of dentin sialophosphoprotein, vascular endothelial growth factor A, human leukocyte antigen-G5, and signal transducer and activator of transcription-3 messenger ribonucleic acids (mRNAs); however, this significant upregulation for STAT3 occurred, followed by a remarkable reduction. The results of this study indicated that cell treatment with Crocin may be effective in improving the stemness capacities of DPSCs. Therefore, the study provided basis for more insights into the biological effects of Crocin on DPSCs that it may aid in the future improvement of mesenchymal stem cell-based therapies.

Comparison of Autogenous Tooth Materials and Other Bone Grafts

Autogenous odontogenic materials are a new, highly biocompatible option for jaw restoration. The inorganic component of autogenous teeth acts as a scaffold to maintain the volume and enable donor cell attachment and proliferation; the organic component contains various growth factors that promote bone reconstruction and repair. The composition of dentin is similar to that of bone, which can be a rationale for promoting bone reconstruction. Recent advances have been made in the field of autogenous odontogenic materials, and studies have confirmed their safety and feasibility after successful clinical application. Autogenous odontogenic materials have unique characteristics compared with other bone-repair materials, such as the conventional autogenous, allogeneic, xenogeneic, and alloplastic bone substitutes. To encourage further research into odontogenic bone grafts, we compared the composition, osteogenesis, and development of autogenous odontogenic materials with those of other bone grafts. In conclusion, odontogenic bone grafts should be classified as a novel bone substitute.

The Use of Autogenous Teeth for Alveolar Ridge Preservation: A Literature Review

Alveolar ridge resorption is a natural consequence of teeth extraction, with unpleasant aesthetic and functional consequences that might compromise a future oral rehabilitation. To minimize the biological consequences of alveolar ridge resorption, several surgical procedures have been designed, the so-called alveolar ridge preservation (ARP) techniques. One important characteristic is the concomitant use of biomaterial in ARP. In the past decade, autogenous teeth as a bone graft material in post-extraction sockets have been proposed with very interesting outcomes, yet with different protocols of preparation. Here we summarize the available evidence on autogenous teeth as a biomaterial in ARP, its different protocols and future directions.

Effect of Autogenous Dentin Graft on New Bone Formation

ABSTRACT

The aim of this study is to analyze the effects of autogenous dentin graft and mixture of autogenous dentin graft and platelet-rich fibrin (PRF) applied to the tooth extraction sockets on bone healing process. A total of 57 extraction sockets in 9 patients who were planned to be treated with dental implant after tooth extraction were evaluated in this study. Extraction sockets were divided randomly into 3 groups for each patient. In the first group, sockets were filled with autogenous dentin graft (Group D). In the second group, sockets were filled with the mixture of PRF and autogenous dentin graft (Group DP). In the third group, sockets were left empty as the control group (Group C). After 3 months, histological and immunohistochemical evaluations were performed on the samples taken during the implant surgery. Additionally, samples obtained from each group were examined by scanning electron microscopy. According to the histopathological findings, when the groups were compared in terms of new bone formation there was a significant difference between Group DP, both Group C, and Group D (P = 0.00), (P = 0.001). These findings supported by immunohistochemical results that showing increased bone morphogenetic protein-2 and Runt-related transcription factor-2 expression in Group DP. It has been concluded that undemineralized autogenous dentin graft has bone formation capacity on early period of bone healing. It can be used as bone graft material in augmentation procedures and its combined use with PRF accelerates new bone formation.

Autogenous Tooth Bone Graft and Simvastatin Combination Effect on Bone Healing

OBJECTIVE

Autogenous tooth bone grafts (ATGM) are materials prepared from extracted teeth and have been used for bone augmentation. These graft materials are known to have similar structures and components to bone grafts. In this sense, this study aimed to evaluate all the tooth layers mixed with simvastatin without any demineralization process effect on bone formation.

METHODS

In 60 Wistar albino rats, a standardized 6.0 m-diameter critical size bone defect was created in their calvarium. The study consists of 1 control and 4 experimental groups. In the control group (12 rats), the defects were left empty. The defects were grafted only with ATGM in Group 1, with ATGM mixed with simvastatin in Group 2, autogenous bone graft mixed with simvastatin in Group 3, and with xenogenic bone graft mixed with simvastatin in Group 4. The animals were sacrificed at the 7th and 28th days after operation.

RESULTS

PCR, micro CT and histological results show that bone formation was enhanced in the experimental groups in comparison to the control group. Group 1 and Group 2 had similar bone formation rate when compared to Group 3 and Group 4 at the 28th day after operation.

CONCLUSION

This study concludes that mineralized teeth may be used for defect reconstruction without any demineralization process. Autogenous mineralized tooth bone graft should be mixed with simvastatin for bone regeneration like other grafts.

Autogenous Dentin Graft in Bone Defects after Lower Third Molar Extraction: A Split-Mouth Clinical Trial

Various biomaterials are currently used for bone regeneration, with autogenous bone being considered the gold standard material because of its osteogenic, osteoconductive, and osteoinductive properties. In recent years, the use of autogenous dentin as a graft material has been described. This split-mouth clinical trial assesses the efficacy of autogenous dentin for the regeneration of periodontal defects caused by bone loss associated with impacted lower third molar extraction. Fifteen patients underwent bilateral extraction surgery (30 third molars) using dentin as a graft material on the test side, and leaving the control side to heal spontaneously, comparing the evolution of the defects by evaluating probing depth at three and six months post-operatively. Bone density and alveolar bone crest maintenance were also evaluated six months after surgery, and pain, inflammation, mouth opening capacity on the second and seventh days after surgery. Probing depth, radiographic bone density, and alveolar bone crest maintenance showed significant differences between the test and control sides. Autogenous dentin was found to be an effective biomaterial for bone regeneration after impacted lower third molar extraction.

Effects of Autogenous Tooth Bone Graft and Platelet-Rich Fibrin in Peri-Implant Defects: An Experimental Study in an Animal Model

The aim of this study was to evaluate the effect of autogenous tooth bone graft (ATBG) combined with platelet-rich fibrin (PRF) on bone healing in rabbit peri-implant osseous defects. Eighteen New Zealand rabbits were divided into 3 groups. Bone defects were prepared in each rabbit, and then an implant cavity was created in the defects. Dental implants were placed, and the peri-implant bone defects were treated with the following 3 methods: no graft material was applied in the control group, bone defects were treated with ATBG in the ATBG group, and bone defects were treated with ATBG combined with PRF in the ATBG+PRF group. After 28 days, the rabbits were sacrificed, and the dental implants with surrounding bone were removed. New bone formation and the percentage of bone-to-implant contact (BIC) were determined with histomorphometric evaluations. New bone formation was significantly higher in the ATBG+PRF group than the control and ATBG groups (P < .05). In addition, BIC was significantly higher in the ATBG+PRF group than in the control and ATBG groups (P < .05). The combination of ATBG with PRF contributed to bone healing in rabbits with peri-implant bone defects.

Evaluation of New Bone Formation Using Autogenous Tooth Bone Graft Combined with Platelet-Rich Fibrin in Calvarial Defects

The purpose of the present study was to evaluate the contributions of autogenous tooth bone graft (ATBG) combined with platelet-rich fibrin (PRF) on new bone formation and bone morphogenetic protein (BMP)-2 in rabbit calvarial defects. Twelve male New Zealand rabbits were used in this study. Three circular bone defects were prepared in each rabbit with a drill. These defects were divided into 3 groups: control, treated with ATBG, and treated with ATBG+PRF. The animals were sacrificed at 28 days. Samples were evaluated by histomorphometric analyses and total augmented area, new bone area and bone density were calculated. In addition, expression of BMP-2 was determined by immunohistochemical staining. The total augmented area, new bone area and bone density were significantly greater in the ATBG group than in the control group (P <0.05). Also, these values were significantly higher in the ATBG+PRF group than the ATBG group (P <0.05). Test groups demonstrated significantly increased BMP-2 levels compared with the control group (P <0.05). The present study suggested that ATBG combined with PRF significantly increased the new bone formation and enhanced bone healing in cranial defects.

Remineralization, Regeneration, and Repair of Natural Tooth Structure: Influences on the Future of Restorative Dentistry Practice

Currently, the principal strategy for the treatment of carious defects involves cavity preparations followed by the restoration of natural tooth structure with a synthetic material of inferior biomechanical and esthetic qualities and with questionable long-term clinical reliability of the interfacial bonds. Consequently, prevention and minimally invasive dentistry are considered basic approaches for the preservation of sound tooth structure. Moreover, conventional periodontal therapies do not always ensure predictable outcomes or completely restore the integrity of the periodontal ligament complex that has been lost due to periodontitis. Much effort and comprehensive research have been undertaken to mimic the natural development and biomineralization of teeth to regenerate and repair natural hard dental tissues and restore the integrity of the periodontium. Regeneration of the dentin-pulp tissue has faced several challenges, starting with the basic concerns of clinical applicability. Recent technologies and multidisciplinary approaches in tissue engineering and nanotechnology, as well as the use of modern strategies for stem cell recruitment, synthesis of effective biodegradable scaffolds, molecular signaling, gene therapy, and 3D bioprinting, have resulted in impressive outcomes that may revolutionize the practice of restorative dentistry. This Review covers the current approaches and technologies for remineralization, regeneration, and repair of natural tooth structure.

Combining autologous particulate dentin, L-PRF, and fibrinogen to create a matrix for predictable ridge preservation: a pilot clinical study

OBJECTIVES

The aim of this study was to describe the histological and clinical outcome of "dentin block" (a mixture of autologous particulate dentin, leukocyte- and platelet-rich fibrin (L-PRF), and liquid fibrinogen) in alveolar ridge preservation.

MATERIAL AND METHODS

Ten extraction sockets were grafted with "dentin block," a mixture of particulate autologous dentin with chopped leukocyte-platelet-rich fibrin (L-PRF) membranes at a 1:1 ratio, and liquid fibrinogen as a binder. Two grafted sites were followed at 4 and 5 months, and 6 sites at 6 months. Biopsies were taken from the core of the grafted site for histologic and histo-morphometric analysis.

RESULTS

All patients completed the study without any adverse event. The vertical and horizontal dimensions of the alveolar ridge were preserved or even increased after 4, 5, or 6 months and remained stable after 6 months of the implant placement. The histological examination revealed a median relative percentage of bone, dentin, and connective tissue of 57.0, 0.9, and 39.3%, respectively. A comparison of samples at different time points (4, 5, and 6 months) showed a progressive increase in the proportion of bone with a decrease in the proportion of dentin. The bone was compact with normal osteocytes and moderate osteoblastic activity. In 4 out of 10 samples, no dentin was observed; in the other samples, it represented 1-5% (with geometric fragments).

CONCLUSIONS

Dentin block showed to be a suitable bone substitute in an alveolar ridges preservation model.

CLINICAL RELEVANCE

The promising results of dentin block as a bone substitute in alveolar ridge preservation could have an important clinical impact considering this biomaterial brings together the regenerative potential of three autologous products with excellent biological and clinical behavior, low risk of adverse effects, and feasible acquisition.

Efficacy of copolymer scaffolds delivering human demineralised dentine matrix for bone regeneration

Poly(L-lactide-co-ε-caprolactone) scaffolds were functionalised by 10 or 20 µg/mL of human demineralised dentine matrix. Release kinetics up to 21 days and their osteogenic potential on human bone marrow stromal cells after 7 and 21 days were studied. A total of 390 proteins were identified by mass spectrometry. Bone regeneration proteins showed initial burst of release. Human bone marrow stromal cells were cultured on scaffolds physisorbed with 20 µg/mL and cultured in basal medium (DDM group) or physisorbed and cultured in osteogenic medium or cultured on non-functionalised scaffolds in osteogenic medium. The human bone marrow stromal cells proliferated less in demineralised dentine matrix group and activated ERK/1/2 after both time points. Cells on DDM group showed highest expression of IL-6 and IL-8 at 7 days and expressed higher collagen type 1 alpha 2, SPP1 and bone morphogenetic protein-2 until 21 days. Extracellular protein revealed higher collagen type 1 and bone morphogenetic protein-2 at 21 days in demineralised dentine matrix group. Cells on DDM group showed signs of mineralisation. The functionalised scaffolds were able to stimulate osteogenic differentiation of human bone marrow stromal cells.

Nano-Structured Demineralized Human Dentin Matrix to Enhance Bone and Dental Repair and Regeneration

Demineralized dentin matrix (DDM), derived from human teeth, is an excellent scaffold material with exciting bioactive properties to enhance bone and dental tissue engineering efficacy. In this article, first the nano-structure and bioactive components of the dentin matrix were reviewed. Then the preparation methods of DDM and the resulting properties were discussed. Next, the efficacy of DDM as a bone substitute with in vitro and in vivo properties were analyzed. In addition, the applications of DDM in tooth regeneration with promising results were described, and the drawbacks and future research needs were also discussed. With the extraction of growth factors from DDM and the nano-structural properties of DDM, previous studies also broadened the use of DDM as a bioactive carrier for growth factor delivery. In addition, due to its excellent physical and biological properties, DDM was also investigated for incorporation into other biomaterials design and fabrication, yielding great enhancements in hard tissue regeneration efficacy.

[Comparative study of processed autogenous tooth bone and xenogeneic bovine bone in repairing an alveolar bone defect]

OBJECTIVE

This study was conducted to counter the osteogenesis effects of processed autogenous tooth bone and xenogeneic bovine bone following tooth extraction and to provide an experimental basis for clinical applications.

METHODS

Central incisors were extracted with general anesthesia on both sides of a maxillary arch in 12 rabbits, which were randomly divided into three groups, thereby containing four rabbits in each group. Three rabbits were assigned to the experimental groups and one was for the control group. In the experimental groups, the xenogeneic bovine bone was applied to the left incisor socket, whereas the processed autogenous tooth bone was applied to the right incisor socket. The blank control group only extracted the teeth and did not implant any bone powder. The three groups died after 4, 8, and 12 weeks, respectively. A mineralization degree of new bone tissues was observed by fluorescence staining and the formation of a new bone was observed by histology.

RESULTS

The sedimentary mineralization rate was greater in the processed autogenous tooth bone than in the xenogeneic bovine bone (P<0.05). The trabecular bone of the xenogeneic bovine bone was sparse and slender. The left sockets, which were filled with the xenogeneic bovine bone, had more woven and less lamellar bones than the right sockets, which were filled with the processed autogenous tooth bone.

CONCLUSIONS

The processed autogenous tooth bone offers more advantages as a bone-grafting material than the xenogeneic bovine bone in terms of bone increment.

Liposomal Delivery of Demineralized Dentin Matrix for Dental Tissue Regeneration

Current dental restorations have short longevity, and consequently, there is a need for novel tissue engineering strategies that aim to regenerate the dentin-pulp complex. Dentin matrix contains a myriad of bioactive growth factors and extracellular matrix proteins associated with the recruitment, proliferation, and differentiation of dental pulp progenitor cells. In this study, we show that demineralized dentin matrix (DDM), from noncarious dentine, can be encapsulated into liposomes for delivery to dental tissue to promote regeneration. Liposomes were formulated to encapsulate 0-100 μg/mL DDM, lysed with Triton X, and used in vascular endothelial growth factor (VEGF) and transforming growth factor-β1 (TGF-β1) enzyme-linked immunosorbent assays to quantify release. The encapsulation efficiencies were calculated to be 25.9% and 28.8% (VEGF/TGF-β1) for 50 μg/mL DDM liposomes and 39% and 146.7% (VEGF/TGF-β1) for 100 μg/mL DDM liposomes. All liposome formulations had no cytotoxic effects on a dental pulp stem cell (DPSC) clone, as shown by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltertrazolium bromide), Caspase 3/7 assays, and cell counts. The ability of the liposomes to stimulate DPSC chemotactic recruitment was tested by Boyden chamber chemotaxis assays. Unloaded liposomes alone stimulated significant progenitor cell recruitment, while DDM-loaded liposomes further promoted chemotactic recruitment in a dose-dependent manner. DDM liposomes promoted the upregulation of "osteodentin" markers osteocalcin and RUNX2 (Runt-related transcription factor 2) in DPSCs after 9 days of treatment, determined by real-time quantitative PCR. Furthermore, Alizarin Red S staining showed that unloaded liposomes alone induced biomineralization of DPSCs, and DDM liposomes further increased the amount of mineralization observed. DDM liposomes were more effective than free DDM (10 μg/mL) at activating recruitment and osteogenic differentiation of DPSC, which are key events in the endogenous repair of the dentin-pulp complex. The study has highlighted the therapeutic potential of bioactive DDM liposomes in activating dental tissue repair in vitro, suggesting that liposomal delivery from biomaterials could be a valuable tool for reparative dentistry and hard-tissue engineering applications.

Autogenous teeth used for bone grafting: A systematic review

BACKGROUND

Recently, bone graft materials using permanent teeth have come to light, and clinical and histological outcomes of this material have been confirmed by some studies. The aim of this systematic review was to evaluate the reliability of the autogenous tooth bone graft material applied to alveolar ridge augmentation procedures.

MATERIAL AND METHODS

A systematic review of literature was conducted analyzing articles published between 2007 and 2017. The following four outcome variables were defined: a) implant stability b) post-operative complication c) evaluation of implant survival and failure rates, and d) histological analysis. A total of 108 articles were identified; 6 were selected for review. Based on the PICO (problem, intervention, comparison, outcome) model, the chief question of this study was: Can patients with alveolar ridge deficiency be successfully treated with the autogenous teeth used as bone graft?

RESULTS

The mean primary stability of the placed implants was 67.3 ISQ and the mean secondary stability was 75.5 ISQ. The dehiscence of the wound was the most frequent complication with a rate of 29.1%. Of the 182 analyzed implants, the survival rate was 97.7% and the failure rate was 2.3%. In the histological analysis, most of studies reported bone formation.

CONCLUSIONS

There is insufficient evidence regarding the effects of autogenous teeth used for bone grafting to support any definitive conclusions, although it has been shown clinically safe and good bone forming capacity, and good results are shown about implant stability.

Vascular endothelial growth factor and biphasic calcium phosphate in the endosseous healing of femoral defects: An experimental rat study

Background/purpose

The presence of adequate bone volume is a critical factor in rehabilitative dentistry. Despite the use of many promising alloplasts, success in stimulating bone formation has been limited, mostly due to poor local biological response. Growth factors have been introduced to stimulate angiogenesis and new bone formation. This histologic and histomorphometric study aimed to evaluate the effect of vascular endothelial growth factor (VEGF) and a biphasic alloplastic graft material (BA) on the healing of endosseous defects in rats.

Materials and methods

Twenty male Wistar rats were used. Two critical-sized bone defects were created in both the right and left femurs of each rat. Each defect was randomly assigned to be treated with VEGF, BA, or VEGF + BA, or to be left empty as a control. Half of the animals were sacrificed after 1 week, and the remaining half were sacrificed after 2 weeks. Inflammation, necrosis, and new bone areas were evaluated by means of histologic and histomorphometric analyses.

Results

Compared to the control group, defects treated with VEGF alone or in combination with BA showed higher rates of bone formation (33.10–46.60%) on Day 7. Additionally, VEGF significantly reduced inflammation and necrosis (P < 0.001). However, the differences were no longer discernable on Day 14.

Conclusion

VEGF makes a significant contribution to angiogenesis and osteogenesis in the early stages of bone defect healing, and its combination with an osteoconductive grafting material (BA) may further enhance new bone formation.

Different methods of dentin processing for application in bone tissue engineering: A systematic review

Dentin has become an interesting potential biomaterial for tissue engineering of oral hard tissues. It can be used as a scaffold or as a source of growth factors in bone tissue engineering. Different forms of dentin have been studied for their potential use as bone substitutes. Here, we systematically review different methods of dentin preparation and the efficacy of processed dentin in bone tissue engineering. An electronic search was carried out in PubMed and Scopus databases for articles published from 2000 to 2016. Studies on dentin preparation for application in bone tissue engineering were selected. The initial search yielded a total of 1045 articles, of which 37 were finally selected. Review of studies showed that demineralization was the most commonly used dentin preparation process for use in tissue engineering. Dentin extract, dentin particles (tooth ash), freeze-dried dentin, and denatured dentin are others method of dentin preparation. Based on our literature review, we can conclude that preparation procedure and the size and shape of dentin particles play an important role in its osteoinductive and osteoconductive properties. Standardization of these methods is important to draw a conclusion in this regard. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2616-2627, 2016.

Advancing biomaterials of human origin for tissue engineering

Biomaterials have played an increasingly prominent role in the success of biomedical devices and in the development of tissue engineering, which seeks to unlock the regenerative potential innate to human tissues/organs in a state of deterioration and to restore or reestablish normal bodily function. Advances in our understanding of regenerative biomaterials and their roles in new tissue formation can potentially open a new frontier in the fast-growing field of regenerative medicine. Taking inspiration from the role and multi-component construction of native extracellular matrices (ECMs) for cell accommodation, the synthetic biomaterials produced today routinely incorporate biologically active components to define an artificial in vivo milieu with complex and dynamic interactions that foster and regulate stem cells, similar to the events occurring in a natural cellular microenvironment. The range and degree of biomaterial sophistication have also dramatically increased as more knowledge has accumulated through materials science, matrix biology and tissue engineering. However, achieving clinical translation and commercial success requires regenerative biomaterials to be not only efficacious and safe but also cost-effective and convenient for use and production. Utilizing biomaterials of human origin as building blocks for therapeutic purposes has provided a facilitated approach that closely mimics the critical aspects of natural tissue with regard to its physical and chemical properties for the orchestration of wound healing and tissue regeneration. In addition to directly using tissue transfers and transplants for repair, new applications of human-derived biomaterials are now focusing on the use of naturally occurring biomacromolecules, decellularized ECM scaffolds and autologous preparations rich in growth factors/non-expanded stem cells to either target acceleration/magnification of the body's own repair capacity or use nature's paradigms to create new tissues for restoration. In particular, there is increasing interest in separating ECMs into simplified functional domains and/or biopolymeric assemblies so that these components/constituents can be discretely exploited and manipulated for the production of bioscaffolds and new biomimetic biomaterials. Here, following an overview of tissue auto-/allo-transplantation, we discuss the recent trends and advances as well as the challenges and future directions in the evolution and application of human-derived biomaterials for reconstructive surgery and tissue engineering. In particular, we focus on an exploration of the structural, mechanical, biochemical and biological information present in native human tissue for bioengineering applications and to provide inspiration for the design of future biomaterials.

Homogenous demineralized dentin matrix and platelet-rich plasma for bone tissue engineering in cranioplasty of diabetic rabbits: biochemical, radiographic, and histological analysis

This study evaluated the effects of homogenous demineralized dentin matrix (HDDM) slices and platelet-rich plasma (PRP) in surgical defects created in the parietal bones of alloxan-induced diabetic rabbits, treated with a guided bone regeneration technique. Biochemical, radiographic, and histological analyses were performed. Sixty adult New Zealand rabbits were divided into five groups of 12: normoglycaemic (control, C), diabetic (D), diabetic with a PTFE membrane (DM), diabetic with a PTFE membrane and HDDM slices (DM-HDDM), and diabetic with PTFE membrane and PRP (DM-PRP). The quantity and quality of bone mass was greatest in the DM-HDDM group (respective radiographic and histological analyses: at 15 days, 71.70 ± 16.50 and 50.80 ± 1.52; 30 days, 62.73 ± 16.51 and 54.20 ± 1.23; 60 days, 63.03 ± 11.04 and 59.91 ± 3.32; 90 days, 103.60 ± 24.86 and 78.99 ± 1.34), followed by the DM-PRP group (respective radiographic and histological analyses: at 15 days 23.00 ± 2.74 and 20.66 ± 7.45; 30 days 31.92 ± 6.06 and 25.31 ± 5.59; 60 days 25.29 ± 16.30 and 46.73 ± 2.07; 90 days 38.10 ± 14.04 and 53.38 ± 9.20). PRP greatly enhanced vascularization during the bone repair process. Abnormal calcium metabolism was statistically significant in the DM-PRP group (P<0.001) for all four time intervals studied, especially when compared to the DM-HDDM group. Alkaline phosphatase activity was significantly higher in the DM-HDDM group (P<0.001) in comparison to the C, D, and DM-PRP groups, confirming the findings of intense osteoblastic activity and increased bone mineralization. Thus, HDDM promoted superior bone architectural microstructure in bone defects in diabetic rabbits due to its effective osteoinductive and osteoconductive activity, whereas PRP stimulated angiogenesis and red bone marrow formation.

Elucidating the cellular actions of demineralised dentine matrix extract on a clonal dental pulp stem cell population in orchestrating dental tissue repair

Bioactive growth factors identified within the extracellular matrix of dentine have been proposed roles in regulating the naturally inherent regenerative dentine formation seen in teeth in response to trauma and infection, which may also be harnessed for novel clinical treatments in augmenting mineralised tissue repair. This study examined the specific biological action of demineralised dentine matrix extract on a clonal population of dental pulp stem cells in stimulating the prerequisite stages of wound healing associated with mineralised tissue repair. A clonal dental pulp stem cell population with sustained proliferative capacity and multi-potentiality towards osteogenic, adipogenic and chondrogenic lineages was isolated from the pulp of human third molars. Dentine was collected from human healthy teeth, powdered and treated with ethylenediaminetetraacetic acid to obtain a solubilised DDM protein extract. The influence of DDM on the DPSC clonal population was assessed in vitro. Exposure of cells to proteolytically degraded DDM or unsupplemented media served as controls. Compared to controls, DDM stimulated cell expansion, reduced apoptotic marker caspase 3, increased cell survival marker Akt1 and enhanced mineralised matrix deposition as determined by mineral deposition and increased expression of bone-related markers, alkaline phosphatase and osteopontin. Dental pulp stem cells successfully migrated into collagen gels supplemented with demineralised dentine matrix, with cells remaining viable and expanding in numbers over a 3-day period. Collectively, the results provide evidence that soluble proteins extracted from dentine matrix are able to exert a direct biological effect on dental pulp stem cells in promoting mineralised tissue repair mechanisms.

Histometric evaluation of dental alveolar repair in malnourished rats in the intrauterine or postnatal phase

OBJECTIVE

Nutritional aggravations during pregnancy or during the early stages of postnatal development can impair bone development; thus, we aimed to assess the effects of food restriction on the dental alveolar bone repair process using histometric analysis.

DESIGN

Thirty-six Wistar rats were divided into three groups: (C) 12 pups were obtained from control mothers with food intake at ease; (GR) 12 pups from mothers subjected to 70% food restriction during pregnancy; (PNR) 50% of maternal food restriction during lactation and 50% of restriction for the 12 pups after weaning. At three months of age, the upper right incisor was extracted from the pups. After 14 or 28 days, the pups were sacrificed for evaluation of newly formed bone area (NB) and total bone area (TA) in the medial and apical thirds of the alveolus.

RESULTS

In the apical third of the alveolus, the ratio of NB/TA was greater at 28 days for all groups and there was no damage to any of the groups. In the medial third, the ratio was higher at 28 days for the C and GR groups. The PNR group did not show an evolution of alveolar dental repair. Compared between the thirds, all groups exhibited a higher percentage of newly formed bone in the medial third area, at any time point after surgery.

CONCLUSIONS

The percentage of the total alveolar area covered by newly formed bone (NB/TA) revealed a late preference in the process of alveolar repair in the medial third, although only in the PNR group.

Enhanced bone formation during healing process of tooth sockets filled with demineralized human dentine matrix

BACKGROUND

Orthodontic procedures are often limited by the presence of bone defects caused by trauma, periodontal diseases or surgeries, thus requiring the development of materials capable to compensate such deficiencies. Since bone morphogenetic proteins (BMPs) are indicative of bone reconstitution, this study aimed to evaluate histological and immunohistochemically the temporal location of BMP-2 and BMP-4 in osteoblasts of rat alveolar wounds filled with demineralized human dentine matrix (DHDM), used as a graft material.

METHODS

After extraction of the upper second molars, the left side alveoli were filled with DHDM and the right side served as the control. The animals were euthanized after 3, 5, 10 and 14 days of surgery. After fixation, demineralization and paraffin embedding, representative samples of each group were stained with H&E and immunohistochemically evaluated.

RESULTS

The data showed a statistically significant (p < 0.05) increased number of osteoblasts positively immunostained for BMP-2 and BMP-4 on the experimental side (left) at 10 days. Our results also showed that even when not degraded, dentine matrix was incorporated to new bone formation after 14 days of surgery.

CONCLUSIONS

The results suggest that DHDM acts as a scaffold for osteoblast differentiation, actively yielding new bone formation, and it may represent an effective bone implant material.