Low-intensity pulsed ultrasound enhances bone formation around miniscrew implants

Biomodulation effects induced by ultrasound stimulation in periodontal cells implicated in orthodontic tooth movement: A systematic review

Accelerating orthodontic tooth movement (OTM) is increasingly important for shorter treatment times, which reduces periodontal risks, root resorption and dental caries. Techniques to accelerate OTM focus on stimulating bone remodelling by enhancing osteoclast and osteoblast activity and include both surgical and non-surgical methods. The therapeutic potential of ultrasounds is highly recognized among many medical areas and has shown promising results in modulating bone remodelling and inflammation phenomena. This systematic review aims to collect and analyse the current scientific in vitro and ex vivo evidence on ultrasound stimulation (US) bioeffects in cells implicated in tooth movement. This review was conducted according to PRISMA 2020 guidelines. A bibliographic search was carried out in the PubMed, Scopus and Web of Science databases. Sixteen articles were selected and included in this review. The revised studies suggest that US of 1.0 and 1.5 MHz, delivered at 30 mW/cm2, 10 to 30 min daily over three to 14 days seems to be effective in promoting osteoclastogenic activity, while US of 1.5 MHz, 30 to 90 mW/cm2, in 5- to 20-min sessions delivered daily for 5 to 14 days exhibits the potential to stimulate osteogenic activity and differentiation. Previous research yielded varied evidence of the effectiveness of US in orthodontics. Future animal studies should employ the recommended US parameters and investigate how distinct protocols can differentially impact tissue remodelling pathways. The knowledge arising from this review will ultimately potentiate the application of US to accelerate OTM in the clinical setting.

Evaluate the effects of low-intensity pulsed ultrasound on dental implant osseointegration under type II diabetes

Objective: The objective of this study is to assess the impact of low-intensity pulsed ultrasound (LIPUS) therapy on the peri-implant osteogenesis in a Type II diabetes mellitus (T2DM) rat model. Methods: A total of twenty male Sprague-Dawley (SD) rats were randomly allocated into four groups: Control group, T2DM group, Control-LIPUS group, and T2DM-LIPUS group. Implants were placed at the rats' bilateral maxillary first molar sites. The LIPUS treatment was carried out on the rats in Control-LIPUS group and T2DM-LIPUS group, immediately after the placement of the implants, over three consecutive weeks. Three weeks after implantation, the rats' maxillae were extracted for micro-CT, removal torque value (RTV), and histologic analysis. Results: Micro-CT analysis showed that T2DM rats experienced more bone loss around implant cervical margins compared with the non-T2DM rats, while the LIPUS treated T2DM rats showed similar bone heights to the non-T2DM rats. Bone-implant contact ratio (BIC) were lower in T2DM rats but significantly improved in the LIPUS treated T2DM rats. Bone formation parameters including bone volume fraction (BV/TV), trabecular thickness (Tb.Th), bone mineral density (BMD) and RTV were all positively influenced by LIPUS treatment. Histological staining further confirmed LIPUS's positive effects on peri-implant new bone formation in T2DM rats. Conclusion: As an effective and safe treatment in promoting osteogenesis, LIPUS has a great potential for T2DM patients to attain improved peri-implant osteogenesis. To confirm its clinical efficacy and to explore the underlying mechanism, further prospective cohort studies or randomized controlled trials are needed in the future.

Degradation and Biocompatibility of AZ31 Magnesium Alloy Implants In Vitro and In Vivo: A Micro-Computed Tomography Study in Rats

In current orthodontic practice, miniscrew implants (MSIs) for anchorage and bone fixation plates (BFPs) for surgical orthodontic treatment are commonly used. MSIs and BFPs that are made of bioabsorbable material would avoid the need for removal surgery. We investigated the mechanical, degradation and osseointegration properties and the bone-implant interface strength of the AZ31 bioabsorbable magnesium alloy to assess its suitability for MSIs and BFPs. The mechanical properties of a Ti alloy (TiA), AZ31 Mg alloy (MgA), pure Mg and poly-L-lactic acid (PLA) were investigated using a nanoindentation test. Also, pH changes in the solution and degradation rates were determined using immersion tests. Three-dimensional, high-resolution, micro-computed tomography (CT) of implants in the rat femur was performed. Biomechanical push-out testing was conducted to calculate the maximum shear strength of the bone-implant interface. Scanning electron microscopy (SEM), histological analysis and an evaluation of systemic inflammation were performed. MgA has mechanical properties similar to those of bone, and is suitable for implants. The degradation rate of MgA was significantly lower than that of Mg. MgA achieved a significantly higher bone-implant bond strength than TiA. Micro-CT revealed no significant differences in bone density or bone-implant contact between TiA and MgA. In conclusion, the AZ31 Mg alloy is suitable for both MSIs and BFPs.

Effect of Low-Intensity Pulsed Ultrasound Stimulation, Extracorporeal Shockwaves and Radial Pressure Waves on Akt, BMP-2, ERK-2, FAK and TGF-β1 During Bone Healing in Rat Tibial Defects

An experimental study was conducted to determine whether low-intensity pulsed ultrasound stimulation (LIPUS), extracorporeal shockwave treatment (ESWT) and radial pressure wave treatment (RPWT) modulate Akt, bone morphogenetic protein-2 (BMP-2), extracellular signal-regulated kinase-2 (ERK-2), focal adhesion kinase (FAK) and transforming growth factor-β1 (TGF-β1) during bone healing in rat tibial defects. Rat tibial defects were exposed to 500 shots of ESWT delivered at 0.12 mJ/mm², 500 impulses of RPWT operated at 2.0 bar or to daily 20-min 30 mW/cm² LIPUS. Following 1, 3 and 6 wk, bones were harvested to determine the expression and activity of Akt, BMP-2, ERK-2, FAK and TGF-β1. Animals exposed to ultrasound were followed up to 3 wk. Protein expression and activity were unchanged following LIPUS treatment. ESWT increased Akt activity 2.11-fold (p = 0.043) and TGF-β1 expression 9.11-fold (p = 0.016) at 1 wk and increased FAK activity 2.16-fold (p = 0.047) at 3 wk. RPWT increased FAK activity 2.6-fold (p = 0.028) at 3 wk and decreased Akt expression 0.52-fold (p = 0.05) at 6 wk. In conclusion, the protocols employed for ESWT and RPWT modulated distinct signaling pathways during fracture healing, while LIPUS standard protocol did not change the usual signaling pathways of the proteins investigated. Future studies are required to monitor osteogenesis so that the biologic meaning of our results can be clarified.

Low-intensity pulsed ultrasound promotes alveolar bone regeneration in a periodontal injury model

Periodontitis is a common oral disease characterized by progressive destruction of periodontal tissue and loss of teeth. However, regeneration of periodontal tissue is a time-consuming process. Low-intensity pulsed ultrasound (LIPUS) is a widely used non-invasive intervention for enhancing bone healing in fractures and non-unions. With the hypothesis that LIPUS may accelerate periodontal regeneration, the effects of LIPUS on periodontal tissue regeneration were investigated both in vitro and in vivo. LIPUS (90 mw/cm², 20 min/d, 1.5 MHz) was applied to stimulate dog periodontal ligament cells (dPDLCS). The mRNA expression of BSP (P < 0.05), OPN (P < 0.05) and COL3 (P < 0.05) was increased significantly in the LIPUS group. The positive stained mineralized nodules by alizarin red in the LIPUS group were greater than in the control group (P < 0.05). Eight male beagle dogs were divided into 4 groups: guided tissue regeneration (GTR) group (G1), LIPUS + GTR group (G2), LIPUS group (G3), and control group (G4, no treatment). A 4 × 5 mm² defect was created in the buccal alveolar bone. The modeling areas in the G2 and G3 groups were then exposed to LIPUS. Eight weeks after surgery, histological assessment indicated increased periodontal tissue in the LIPUS + GTR group. Micro computed tomography (micro-CT) showed that the regenerated bone volume (BV) in the G2 was significantly higher than that in the G1, G3 and G4 groups (P < 0.05). The bone surface (BS) trabecular number (Tb.N) and trabecular thickness (Tb.Th) in G2 were markedly higher than in G4 (P < 0.05). It is concluded that LIPUS + GTR can accelerate new alveolar bone formation, with a prospective for promoting periodontal tissue repair.

Reflection of an ultrasonic wave on the bone-implant interface: A numerical study of the effect of the multiscale roughness

Quantitative ultrasound is used to characterize and stimulate osseointegration processes at the bone-implant interface (BII). However, the interaction between an ultrasonic wave and the implant remains poorly understood. This study aims at investigating the sensitivity of the ultrasonic response to the microscopic and macroscopic properties of the BII and to osseointegration processes. The reflection coefficient R of the BII was modeled for different frequencies using a two-dimensional finite element model. The implant surface roughness was modeled by a sinusoidal function with varying amplitude h and spatial frequency L. A soft tissue layer of thickness W was considered between bone tissue and the implant in order to model non-mineralized fibrous tissue. For microscopic roughness, R is shown to increase from around 0.55 until 0.9 when kW increases from 0 to 1 and to be constant for kW > 1, where k is the wavenumber in the implant. These results allow us to show that R depends on the properties of bone tissue located at a distance comprised between 1 and 25 μm from the implant surface. For macroscopic roughness, R is highly dependent on h and this dependence may be explained by phase cancellation and multiple scattering effects for high roughness parameters.

The Role of Oral Cavity Biofilm on Metallic Biomaterial Surface Destruction-Corrosion and Friction Aspects

Metallic biomaterials in the oral cavity are exposed to many factors such as saliva, bacterial microflora, food, temperature fluctuations, and mechanical forces. Extreme conditions present in the oral cavity affect biomaterial exploitation and significantly reduce its biofunctionality, limiting the time of exploitation stability. We mainly refer to friction, corrosion, and biocorrosion processes. Saliva plays an important role and is responsible for lubrication and biofilm formation as a transporter of nutrients for microorganisms. The presence of metallic elements in the oral cavity may lead to the formation of electro-galvanic cells and, as a result, may induce corrosion. Transitional microorganisms such as sulfate-reducing bacteria may also be present among the metabolic microflora in the oral cavity, which can induce biological corrosion. Microorganisms that form a biofilm locally change the conditions on the surface of biomaterials and contribute to the intensification of the biocorrosion processes. These processes may enhance allergy to metals, inflammation, or cancer development. On the other hand, the presence of saliva and biofilm may significantly reduce friction and wear on enamel as well as on biomaterials. This work summarizes data on the influence of saliva and oral biofilms on the destruction of metallic biomaterials.

Low-intensity pulsed ultrasound (LIPUS) stimulates mineralization of MC3T3-E1 cells through calcium and phosphate uptake

The present study aimed to evaluate the effect of low-intensity pulsed ultrasound (LIPUS) on pre-osteoblast mineralization using in vitro bioassays. Pre-osteoblastic MC3T3-E1 cells were exposed to LIPUS at 1 MHz frequency, 0.2 W/cm² intensity and 20% duty cycle for 30 min. The analyses were carried out up to 336 h (14 days) after exposure. The concentration of collagen, phosphate, alkaline phosphatase, calcium and transforming growth factor beta 1 (TGF-β1) in cell supernatant and the presence of calcium deposits in the cells were analyzed. Our results showed that LIPUS promotes mineralized nodules formation. Collagen, phosphate, and calcium levels were decreased in cell supernatant at 192 h after LIPUS exposure. However, alkaline phosphatase and TGF-β1 concentrations remained unchanged. Therapeutic pulsed ultrasound is capable of stimulating differentiation and mineralization of pre-osteoblastic MC3T3-E1 cells by calcium and phosphate uptake with consequent hydroxyapatite formation.

Biocorrosion of 316LV steel used in oral cavity due to Desulfotomaculum nigrificans bacteria

Corrosion processes of metallic biomaterials in the oral cavity pose a significant limitation to the life and reliable functioning of dental materials. In this article, the influence of environment bacteria Desulfotomaculum nigrificans sulfate reducing bacteria on the corrosion processes of 316LV steel was assessed. After 14 and 28 days of contact of the material with the bacterial environment, the surfaces of the tested biomaterial were observed by means of confocal scanning laser microscopy, and their chemical composition was studied using X-Ray Photoelectron Spectrometry and a scanning transmission electron microscopy. Corrosive changes, the presence of sulfur (with atomic concentration of 0.5%) on the surface of the biomaterial and the presence of a thin oxide layer (thickness of ∼20 nm) under the surface of the steel were observed. This corrosion layer with significant size reduction of grains was characterized by an increased amount of oxygen (18% mas., p < 0.001) in comparison to untreated 316LV steel (where oxygen concentration - 10% mas.). Image analysis conducted using APHELION software indicated that corrosion pits took up ∼2.8% of the total tested surface. The greatest number of corrosion pits had a surface area within the range of 100-200 μm² . © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 222-229, 2017.