Regionally variant collagen alignment correlates with viscoelastic properties of the disc of the human temporomandibular joint

Mesenchymal stem cells-derived exosomes alleviate temporomandibular joint disc degeneration in temporomandibular joint disorder

Temporomandibular joint (TMJ) disorder (TMD) is a chronic progressive disease that is commonly seen in clinical settings. TMJ disc degeneration is an important manifestation of TMD, and further aggravates the progression of TMD. However, treatments on TMJ disc degeneration are very limited till now. In this study, we first observed the effects of bone marrow stem cells (BMSC) conditioned medium on functions of TMJ disc fibroblasts. Then BMSC-derived small extracellular vesicles (BMSC-EVs) were isolated and exposed to TMJ disc fibroblasts. RNA-sequencing was used to further investigate the mechanisms. BMSC-EVs were finally injected into a rat model with TMD. Results showed that in the transwell co-culture system, the medium derived from BMSC reduced inflammation and enhanced chondrogenesis in TMJ disc fibroblasts. BMSC-EVs promoted proliferation, migration, and chondrogenic differentiation of TMJ disc fibroblasts, and inhibited apoptosis and inflammatory responses. Local injection of BMSC-EVs into the TMD model alleviated TMJ disc degeneration. Therefore, BMSC-EVs were a potentially effective, sustainable and clinically translational-promising option for TMJ disc degeneration, and further reduce the progression of TMD.

Microstructural, Micromechanical Atlas of the Temporomandibular Joint Disc

The temporomandibular joint (TMJ) disc is mainly composed of collagen, with its arrangement responding to efficient stress distribution. However, microstructural and micromechanical transformations of the TMJ disc under resting, functional, and pathological conditions remain unclear. To address this, our study presents a high-resolution microstructural and mechanical atlas of the porcine TMJ disc. First, the naive microstructure and mechanical properties were investigated in porcine TMJ discs (resting and functional conditions). Subsequently, the perforation and tear models (pathological conditions) were compared. Following this, a rabbit model of anterior disc displacement (abnormal stress) was studied. Results show diverse microstructures and mechanical properties at the nanometer to micrometer scale. In the functional state, gradual unfolding of the crimping cycle in secondary and tertiary structures leads to D-cycle prolongation in the primary structure, causing tissue failure. Pathological conditions lead to stress concentration near the injury site due to collagen interfibrillar traffic patterns, resulting in earlier damage manifestation. Additionally, the abnormal stress model shows collagen damage initiating at the primary structure and extending to the superstructure over time. These findings highlight collagen's various roles in different pathophysiological states. Our study offers valuable insights into TMJ disc function and dysfunction, aiding the development of diagnostic and therapeutic strategies for TMJ disorders, as well as providing guidance for the design of structural biomimetic materials.

Characterization of the Temporomandibular Joint Disc Complex in the Yucatan Minipig

The temporomandibular joint (TMJ) disc complex (i.e., the TMJ disc and its six attachments) is crucial to everyday functions such as mastication and speaking. The TMJ can be afflicted by many conditions, including disc displacement and defects. Pathologies of the TMJ disc complex most commonly present first as anterior disc displacement, which the field hypothesizes may implicate the two posterior attachments. As a result of anterior disc displacement, defects may develop in the lateral disc complex. Tissue engineering is poised to improve treatment paradigms for these indications of the TMJ disc complex by engineering biomimetic implants, but, first, gold-standard design criteria for such implants should be established through characterization studies. This study's objective was to characterize the structural, mechanical, biochemical, and crosslinking differences among the two posterior attachments and the lateral disc in the Yucatan minipig, a well-accepted TMJ animal model. In tension, it was found that the posterior inferior attachment (PIA) was significantly stiffer and stronger by 2.13 and 2.30 times, respectively, than the posterior superior attachment (PSA). It was found that collagen in both attachments was primarily aligned mediolaterally; however, the lateral disc was much more aligned and anisotropic than either attachment. Among the three locations, the PSA exhibited the greatest degree of heterogeneity and highest proportion of fat vacuoles. The PIA and lateral disc were 1.93 and 1.91 times more collagenous, respectively, by dry weight (DW) than the PSA. The PIA also exhibited 1.78 times higher crosslinking per DW than the PSA. Glycosaminoglycan per DW was significantly higher in the lateral disc by 1.48 and 5.39 times than the PIA and PSA, respectively. Together, these results establish design criteria for tissue-engineering of the TMJ disc complex and indicate that the attachments are less fibrocartilaginous than the disc, while still significantly contributing to the mechanical stability of the TMJ disc complex during articulation. These results also support the biomechanical function of the PIA and PSA, suggesting that the stiffer PIA anchors the disc to the mandibular condyle during articulation, while the softer PSA serves to allow translation over the articular eminence. Impact Statement Characterization of the temporomandibular joint (TMJ) disc complex (i.e., the disc and its attachments) has important implications for those aiming to tissue-engineer functional replacements and can help elucidate its biomechanical function. For example, the findings shown here suggest that the stiffer posterior inferior attachment anchors the disc during articulation, while the softer posterior superior attachment allows translation over the articular eminence.

Quantum dots-labeled polymeric scaffolds for in vivo tracking of degradation and tissue formation

The inevitable gap between in vitro and in vivo degradation rate of biomaterials has been a challenging factor in the optimal designing of scaffold's degradation to be balanced with new tissue formation. To enable non-/minimum-invasive tracking of in vivo scaffold degradation, chemical modifications have been applied to label polymers with fluorescent dyes. However, the previous approaches may have limited expandability due to complicated synthesis processes. Here, we introduce a simple and efficient method to fluorescence labeling of polymeric scaffolds via blending with near-infrared (NIR) quantum dots (QDs), semiconductor nanocrystals with superior optical properties. QDs-labeled, 3D-printed PCL scaffolds showed promising efficiency and reliability in quantitative measurement of degradation using a custom-built fiber-optic imaging modality. Furthermore, QDs-PCL scaffolds showed neither cytotoxicity nor secondary labeling of adjacent cells. QDs-PCL scaffolds also supported the engineering of fibrous, cartilaginous, and osteogenic tissues from mesenchymal stem/progenitor cells (MSCs). In addition, QDs-PCL enabled a distinction between newly forming tissue and the remaining mass of scaffolds through multi-channel imaging. Thus, our findings suggest a simple and efficient QDs-labeling of PCL scaffolds and minimally invasive imaging modality that shows significant potential to enable in vivo tracking of scaffold degradation as well as new tissue formation.

A bioinspired and high-strengthed hydrogel for regeneration of perforated temporomandibular joint disc: Construction and pleiotropic immunomodulatory effects

Due to the lack of an ideal material for TMJ (temporomandibular joint) disc perforation and local inflammation interfering with tissue regeneration, a functional TGI/HA-CS (tilapia type I gelatin/hyaluronic acid-chondroitin sulfate) double network hydrogel was constructed in this paper. It was not only multiply bionic in its composition, structure and mechanical strength, but also endowed with the ability to immunomodulate microenvironment and simultaneously induce in situ repair of defected TMJ discs. On the one hand, it inhibited inflammatory effects of inflammasome in macrophages, reduced the extracellular matrix (ECM)-degrading enzymes secreted by chondrocytes, reversed the local inflammatory state, promoted the proliferation of TMJ disc cells and induced fibrochondrogenic differentiation of synovium-derived mesenchymal stem cells (SMSCs). On the other hand, it gave an impetus to repairing a relatively-large (6 mm-sized) defect in mini pigs' TMJ discs in a rapid and high-quality manner, which suggested a promising clinical application.

Oxo-M and 4-PPBP Delivery via Multi-Domain Peptide Hydrogel Toward Tendon Regeneration

We have recently identified novel small molecules, Oxo-M and 4-PPBP, which specifically stimulate endogenous tendon stem/progenitor cells (TSCs), leading to potential regenerative healing of fully transected tendons. Here, we investigated an injectable, multidomain peptide (MDP) hydrogel providing controlled delivery of the small molecules for regenerative tendon healing. We investigated the release kinetics of Oxo-M and 4-PPBP from MDP hydrogels and the effect of MDP-released small molecules on tenogenic differentiation of TSCs and in vivo tendon healing. In vitro, MDP showed a sustained release of Oxo-M and 4-PPBP and a slower degradation than fibrin. In addition, tenogenic gene expression was significantly increased in TSC with MDP-released Oxo-M and 4-PPBP as compared to the fibrin-released. Invivo, MDP releasing Oxo-M and 4-PPBP significantly improved tendon healing, likely associated with prolonged effects of Oxo-M and 4-PPBP on suppression of M1 macrophages and promotion of M2 macrophages. Comprehensive analyses including histomorphology, digital image processing, and modulus mapping with nanoindentation consistently suggested that Oxo-M and 4-PPBP delivered via MDP further improved tendon healing as compared to fibrin-based delivery. In conclusion, MDP delivered with Oxo-M and 4-PPBP may serve as an efficient regenerative therapeutic for in situ tendon regeneration and healing.

Biological Treatments for Temporomandibular Joint Disc Disorders: Strategies in Tissue Engineering

The temporomandibular joint (TMJ) is an important structure for the masticatory system and the pathologies associated with it affect a large part of the population and impair people's lifestyle. It comprises an articular disc, that presents low regeneration capacities and the existing clinical options for repairing it are not effective. This way, it is imperative to achieve a permanent solution to guarantee a good quality of life for people who suffer from these pathologies. Complete knowledge of the unique characteristics of the disc will make it easier to achieve a successful tissue engineering (TE) construct. Thus, the search for an effective, safe and lasting solution has already started, including materials that replace the disc, is currently growing. The search for a solution based on TE approaches, which involve regenerating the disc. The present work revises the TMJ disc characteristics and its associated diseases. The different materials used for a total disc replacement are presented, highlighting the TE area. A special focus on future trends in the field and part of the solution for the TMJ problems described in this review will involve the development of a promising engineered disc approach through the use of decellularized extracellular matrices.

Comparison of the Trueness of Fits of the Biphasic Transverse Isotropic and Kelvin Models to the Tensile Behavior of Temporomandibular Joint Disc

This technical brief explores the validity and trueness of fit for using the transverse isotropic biphasic and Kelvin models (first and second order generalized) for characterization of the viscoelastic tensile properties of the temporomandibular joint (TMJ) discs from pigs and goats at a strain rate of 10 mm/min. We performed incremental stress-relaxation tests from 0 to 12% strain, in 4% strain steps on pig TMJ disc samples. In addition, to compare the outcomes of these models between species, we also performed a single-step stress-relaxation test of 10% strain. The transverse isotropic biphasic model yielded reliable fits in reference to the least root mean squared error method only at low strain, while the Kelvin models yielded good fits at both low and high strain, with the second order generalized Kelvin model yielding the best fit. When comparing pig to goat TMJ disc in 10% strain stress-relaxation test, unlike the other two Kelvin models, the transverse isotropic model did not fit well for this larger step. In conclusion, the second order Kelvin model showed the best fits to the experimental data of both species. The transverse isotropic biphasic model did not fit well with the experimental data, although better at low strain, suggesting that the assumption of water flow only applies while uncrimping the collagen fibers. Thus, it is likely that the permeability from the biphasic model is not truly representative, and other biphasic models, such as the poroviscoelastic model, would likely yield more meaningful outputs and should be explored in future works.

Mechanical characterization and viscoelastic model of the ovine temporomandibular joint Disc in indentation, uniaxial tension, and biaxial tension

There have been recent investigations into developing disc replacements and regenerative medicine to treat internal derangements of the temporomandibular joint (TMJ) disc. Previous attempts at disc replacements have faced challenges related in part to a limited understanding of the TMJ's complex mechanical environment. The purpose of this study was to characterize the mechanical behavior of the ovine TMJ disc and to derive viscoelastic constitutive models from the experimental data. Fresh ovine TMJ discs were tested in indentation stress-relaxation tests on the inferior surface, uniaxial tension tests to failure, and dynamic biaxial tensile tests. Results showed an order of magnitude stiffer behavior in tension in the anteroposterior (primary fiber) direction compared to the mediolateral direction. The stiffness in tension was much greater than in compression. Regional comparisons showed greater elastic moduli in indentation in the posterior and anterior bands compared to the central region. A hyper-viscoelastic constitutive model captured the dynamic stress-stretch behavior in both indentation and biaxial tension with good agreement. These data will support ongoing and future computational modeling of local TMJ mechanics, aid in biomaterials identification, and ultimately enhance development of implant designs for TMJ disc replacement.

Effect of local anesthetics on viability and differentiation of various adult stem/progenitor cells

BACKGROUND

Local anesthetics (LAs) are widely used to control pain during various clinical treatments. One of the side effects of LAs, cytotoxicity, has been investigated in various cells including stem/progenitor cells. However, our understanding of the effects of LAs on the differentiation capacity of stem/progenitor cells still remains limited. Therefore, a comparative study was conducted to investigate the effects of multiple LAs on viability and multi-lineage differentiation of stem/progenitor cells that originated from various adult tissues.

METHOD

Multiple types of stem/progenitor cells, including bone marrow mesenchymal stem/progenitor cells (MSCs), dental pulp stem/progenitor cells (DPSCs), periodontal ligament stem/progenitor cells (PDLSCs), and tendon-derived stem/progenitor cells, were either obtained from a commercial provider or isolated from adult human donors. Lidocaine (LD) and bupivacaine (BP) at various doses (1×, 0.75×, 0.5×, and 0.25× of each physiological dose) were applied to the different stem/progenitor cells for an hour, followed by induction of fibrogenic, chondrogenic, osteogenic, and adipogenic differentiation. Live/dead and MTT assays were performed at 24 h after the LD or BP treatment. At 2 weeks, qRT-PCR was conducted to evaluate the gene expressions associated with differentiation. After 4 weeks, multiple biochemical staining was performed to evaluate matrix deposition.

RESULTS

At 24 h after LD or BP treatment, 1× and 0.75× physiological doses of LD and BP showed significant cytotoxicity in all the tested adult stem/progenitor cells. At 0.5×, BP resulted in higher viability than the same dose LD, with variance between cell types. Overall, the gene expressions associated with fibrogenic, chondrogenic, osteogenic, and adipogenic differentiation were attenuated in LD or BP pre-treated stem/progenitor cells, with notable dose-effect and dependence on types. In contrast, certain doses of LD and/or BP were found to increase specific gene expression, depending on the cell types.

CONCLUSION

Our data suggest that LAs such as LD and BP affect not only the viability but also the differentiation capacity of adult stem/progenitor cells from various anatomical sites. This study sheds light on stem cell applications for tissue regeneration in which isolation and transplantation of stem cells frequently involve LA administration.

Temporomandibular joint imaging: current clinical applications, biochemical comparison with the intervertebral disc and knee meniscus, and opportunities for advancement

Temporomandibular disorders encompass multiple pathologies of the temporomandibular joint that manifest as middle/inner ear symptoms, headache, and/or localized TMJ symptoms. There is an important although somewhat limited role of imaging in the diagnostic evaluation of temporomandibular disorders. In this manuscript, we provide a comprehensive review of TMJ anatomy, outline potentially important features of TMJ disc ultrastructure and biochemistry in comparison with the intervertebral disc and knee meniscus, and provide imaging examples of the TMJ abnormalities currently evaluable with MRI and CT. In addition, we provide an overview of emerging and investigational TMJ imaging techniques in order to encourage further imaging research based on the biomechanical alterations of the TMJ disc.

High-Strength Fiber-Reinforced Composite Hydrogel Scaffolds as Biosynthetic Tendon Graft Material

The development of suitable synthetic scaffolds for use as human tendon grafts to repair tendon ruptures remains a significant engineering challenge. Previous synthetic tendon grafts have demonstrated suboptimal tissue ingrowth and synovitis due to wear particles from fiber-to-fiber abrasion. In this study, we present a novel fiber-reinforced hydrogel (FRH) that mimics the hierarchical structure of the native human tendon for synthetic tendon graft material. Ultrahigh molecular weight polyethylene (UHMWPE) fibers were impregnated with either biosynthetic polyvinyl alcohol/gelatin hydrogel (FRH-PG) or with polyvinyl alcohol/gelatin + strontium-hardystonite (Sr-Ca₂ZnSi₂O₇, Sr-HT) composite hydrogel (FRH-PGS). The scaffolds were fabricated and assessed to evaluate their suitability for tendon graft applications. The microstructure of both FRH-PG and FRH-PGS showed successful impregnation of the hydrogel component, and the tendon scaffolds exhibited equilibrium water content of ∼70 wt %, similar to the values reported for native human tendon, compared to ∼50 wt % water content retained in unmodified UHMWPE fibers. The tensile strength of FRH-PG and FRH-PGS (77.0-81.8 MPa) matched the range of human Achilles' tendon tensile strengths reported in the literature. In vitro culture of rat tendon stem cells showed cell and tissue infiltration into both FRH-PG and FRH-PGS after 2 weeks, and the presence of Sr-HT ceramic particles influenced the expression of tenogenic markers. On the other hand, FRH-PG supported the proliferation of murine C2C12 myoblasts, whereas FRH-PGS seemingly did not support it under static culture conditions. In vivo implantation of FRH-PG and FRH-PGS scaffolds into full-thickness rat patellar tendon defects showed good collagenous tissue ingrowth into these scaffolds after 6 weeks. This study demonstrates the potential viability for our FRH-PG and FRH-PGS scaffolds to be used for off-the-shelf biosynthetic tendon graft material.

Shear Wave Elastography in the Evaluation of Temporomandibular Joint Disorders

We aimed at verifying the usefulness of shear wave elastography in determining the temporomandibular disc stiffness in patients with a temporomandibular disorders (TMDs). The study included 37 patients with confirmed TMDs and 208 healthy volunteers. Patients presented with significantly greater stiffness of the intermediate zone of the disc (region of interest [ROI] 1) and significantly lower stiffness of its anteriorly displaced portion (ROI 3). A receiver operating characteristics analysis indicated that a decrease in the stiffness in ROI 3 less than 8.667 KPa provided 100% sensitivity, 97.3% specificity, 100% positive predictive value (PPV) and 99.5% negative predictive value (NPV) in distinguishing between patients with TMDs and without. Whereas an increase in ROI 1 stiffness to at least 54.33 KPa provided high specificity and NPV, both the sensitivity and the PPV of this predictor equaled zero. Findings suggest that a decrease in anteriorly dislocated disc stiffness less than 8.667 kPa can accurately identify patients with TMDs.

A Combination of Oxo-M and 4-PPBP as a potential regenerative therapeutics for tendon injury

Tendons injuries frequently result in scar-like tissue with poor biochemical structure and mechanical properties. We have recently reported that CD146⁺ perivascular originated tendon stem/progenitor cells (TSCs), playing critical roles in tendon healing. Here, we identified highly efficient small molecules that selectively activate endogenous TSCs for tendon regeneration.

Methods: From a pool of ERK1/2 and FAK agonists, Oxo-M and 4-PPBP were identified, and their roles in tenogenic differentiation of TSCs and in vivo tendon healing were investigated. Controlled delivery of Oxo-M and 4-PPBP was applied via PLGA µS. Signaling studies were conducted to determine the mechanism for specificity of Oxo-M and 4-PPBP to CD146⁺ TSCs.

Results: A combination of Oxo-M and 4-PPBP synergistically increased the expressions of tendon-related gene markers in TSCs. In vivo, delivery of Oxo-M and 4-PPBP significantly enhanced healing of fully transected rat patellar tendons (PT), with functional restoration and reorganization of collagen fibrous structure. Our signaling study suggested that Oxo-M and 4-PPBP specifically targets CD146⁺ TSCs via non-neuronal muscarinic acetylcholine receptors (AChR) and σ1 receptor (σ1) signaling.

Principal conclusions: Our findings demonstrate a significant potential of Oxo-M and 4-PPBP as a regenerative therapeutics for tendon injuries.

Temporomandibular Joint Condyle-Disc Morphometric Sexual Dimorphisms Independent of Skull Scaling

PURPOSE

Approximately 2 to 4% of the US population have been estimated to seek treatment for temporomandibular symptoms, predominately women. The study purpose was to determine whether sex-specific differences in temporomandibular morphometry result from scaling with sex differences in skull size and shape or intrinsic sex-specific differences.

MATERIALS AND METHODS

A total of 22 (11 male [aged 74.5 ± 9.1 years]; 11 female [aged 73.6 ± 12.8 years]) human cadaveric heads with no history of temporomandibular disc derangement underwent cone beam computed tomography and high-resolution magnetic resonance imaging scanning to determine 3-dimensional cephalometric parameters and temporomandibular morphometric outcomes. Regression models between morphometric outcomes and cephalometric parameters were developed, and intrinsic sex-specific differences in temporomandibular morphometry normalized by cephalometric parameters were determined. Subject-specific finite element (FE) models of the extreme male and extreme female conditions were developed to predict variations in articular disc stress-strain under the same joint loading.

RESULTS

In some cases, sex differences in temporomandibular morphometric parameters could be explained by linear scaling with skull size and shape; however, scaling alone could not fully account for some differences between sexes, indicating intrinsic sex-specific differences. The intrinsic sex-specific differences in temporomandibular morphometry included an increased condylar medial length and mediolateral disc lengths in men and a longer anteroposterior disc length in women. Considering the extreme male and female temporomandibular morphometry observed in the present study, subject-specific FE models resulted in sex differences, with the extreme male joint having a broadly distributed stress field and peak stress of 5.28 MPa. The extreme female joint had a concentrated stress field and peak stress of 7.37 MPa.

CONCLUSIONS

Intrinsic sex-specific differences independent of scaling with donor skull size were identified in temporomandibular morphometry. Understanding intrinsic sex-specific morphometric differences is critical to determining the temporomandibular biomechanics given the effect of anatomy on joint contact mechanics and stress-strain distributions and requires further study as one potential factor for the increased predisposition of women to temporomandibular disc derangement.

Considerations for translation of tissue engineered fibrocartilage from bench to bedside

Fibrocartilage is found in the knee meniscus, the temporomandibular joint (TMJ) disc, the pubic symphysis, the annulus fibrosus of intervertebral disc, tendons, and ligaments. These tissues are notoriously difficult to repair due to their avascularity, and limited clinical repair and replacement options exist. Tissue engineering has been proposed as a route to repair and replace fibrocartilages. Using the knee meniscus and TMJ disc as examples, this review describes how fibrocartilages can be engineered toward translation to clinical use. Presented are fibrocartilage anatomy, function, epidemiology, pathology, and current clinical treatments because they inform design criteria for tissue engineered fibrocartilages. Methods for how native tissues are characterized histomorphologically, biochemically, and mechanically to set gold standards are described. Then, provided is a review of fibrocartilage-specific tissue engineering strategies, including the selection of cell sources, scaffold or scaffold-free methods, and biochemical and mechanical stimuli. In closing, the Food and Drug Administration paradigm is discussed to inform researchers of both the guidance that exists and the questions that remain to be answered with regard to bringing a tissue engineered fibrocartilage product to the clinic.

Effect of Measurement Technique on TMJ Mandibular Condyle and Articular Disc Morphometry: CBCT, MRI, and Physical Measurements

PURPOSE

Accurate description of the temporomandibular size and shape (morphometry) is critical for clinical diagnosis and surgical planning and the design and development of regenerative scaffolds and prosthetic devices and to model the temporomandibular loading environment. The study objective was to determine the 3-dimensional morphometry of the temporomandibular joint (TMJ) condyle and articular disc using cone-beam computed tomography (CBCT), magnetic resonance imaging (MRI), and physical measurements of the same joints using a repeated measures design and to determine the effect of the measurement technique on temporomandibular size and shape.

MATERIALS AND METHODS

Human cadaveric heads underwent a multistep protocol to acquire physiologically meaningful measurements of the condyle and disc. The heads first underwent CBCT scanning, and solid models were automatically generated. The superficial soft tissues were dissected, and intact TMJs were excised and underwent MRI scanning, with solid models generated after manual segmentation. After MRI, the intact joints were dissected, and physical measurements of the condyle and articular disc were performed. The CBCT-based model measurements, MRI-based model measurements, and physical measurements were standardized, and a repeated measures study design was used to determine the effect of the measurement technique on the morphometric parameters.

RESULTS

Multivariate general linear mixed effects models showed significant effects for measurement technique for condylar morphometric outcomes (P < .001) and articular disc morphometric outcomes (P < .001). The physical measurements after dissection were larger than either the CBCT-based or MRI-based measurements. Differences in imaging-based morphometric parameters followed a complex relationship between imaging modality resolution and contrast between tissue types.

CONCLUSIONS

Physical measurements after dissection are still considered the reference standard. However, owing to their inaccessibility in vivo, understanding how the imaging technique affects the temporomandibular size and shape is critical toward the development of high-fidelity solid models to be used in the design and development of regenerative scaffolds, surgical planning, prosthetic devices, and anatomic investigations.