Characterization of titanium surface coated with epidermal growth factor and its effect on human gingival fibroblasts

Gelatin-methacryloyl hydrogels containing turnip mosaic virus for fabrication of nanostructured materials for tissue engineering

Current tissue engineering techniques frequently rely on hydrogels to support cell growth, as these materials strongly mimic the extracellular matrix. However, hydrogels often need ad hoc customization to generate specific tissue constructs. One popular strategy for hydrogel functionalization is to add nanoparticles to them. Here, we present a plant viral nanoparticle the turnip mosaic virus (TuMV), as a promising additive for gelatin methacryloyl (GelMA) hydrogels for the engineering of mammalian tissues. TuMV is a flexuous, elongated, tubular protein nanoparticle (700–750 nm long and 12–15 nm wide) and is incapable of infecting mammalian cells. These flexuous nanoparticles spontaneously form entangled nanomeshes in aqueous environments, and we hypothesized that this nanomesh structure could serve as a nanoscaffold for cells. Human fibroblasts loaded into GelMA-TuMV hydrogels exhibited similar metabolic activity to that of cells loaded in pristine GelMA hydrogels. However, cells cultured in GelMA-TuMV formed clusters and assumed an elongated morphology in contrast to the homogeneous and confluent cultures seen on GelMA surfaces, suggesting that the nanoscaffold material per se did not favor cell adhesion. We also covalently conjugated TuMV particles with epidermal growth factor (EGF) using a straightforward reaction scheme based on a Staudinger reaction. BJ cells cultured on the functionalized scaffolds increased their confluency by approximately 30% compared to growth with unconjugated EGF. We also provide examples of the use of GelMA-TuMV hydrogels in different biofabrication scenarios, include casting, flow-based-manufacture of filaments, and bioprinting. We envision TuMV as a versatile nanobiomaterial that can be useful for tissue engineering.

Epidermal Growth Factor Is Associated with Loss of Mucosae Sealing and Peri-Implant Mucositis: A Pilot Study

This study aimed to evaluate the correlation between epidermal growth factor (EGF) and receptor (EGFR) levels in different clinical stages of dental implant rehabilitation and trace mucositis development’s biological profile. Thirty-six participants from the Specialization in Implant Dentistry, Universidade Federal Fluminense, Brazil, were included in the study and underwent sample collection: inside the alveolar socket, immediately before implant placement (Group 1, n = 10); at the peri-implant crevicular fluid (PICF) during reopening (Group 2, n = 10); PICF from healthy peri-implant in function (Group 3, n = 8); and PICF from mucositis sites (Group 4, n = 18). Quantitative polymerase chain reaction (PCR) evaluated EGF/EGFR gene expression using the SYBR Green Master Mix detection system. The results showed that EGF expression in the peri-implant crevicular fluid was statistically different. There was a higher EGF expression for group C (peri-implant health) (p = 0.04) than for the other groups. Regarding EGFR, there was no statistical difference among the groups (p = 0.56). It was concluded that low levels of EGF gene expression in the peri-implant crevicular fluid are related to the development of peri-implant mucositis and the absence of mucosae sealing. There was no correlation between EGFR gene expression with health or mucositis.

Extracellular-Vesicle-Based Coatings Enhance Bioactivity of Titanium Implants-SurfEV

Extracellular vesicles (EVs) are nanoparticles released by cells that contain a multitude of biomolecules, which act synergistically to signal multiple cell types. EVs are ideal candidates for promoting tissue growth and regeneration. The tissue regenerative potential of EVs raises the tantalizing possibility that immobilizing EVs on implant surfaces could potentially generate highly bioactive and cell-instructive surfaces that would enhance implant integration into the body. Such surfaces could address a critical limitation of current implants, which do not promote bone tissue formation or bond bone. Here, we developed bioactive titanium surface coatings (SurfEV) using two types of EVs: secreted by decidual mesenchymal stem cells (DEVs) and isolated from fermented papaya fluid (PEVs). For each EV type, we determined the size, morphology, and molecular composition. High concentrations of DEVs enhanced cell proliferation, wound closure, and migration distance of osteoblasts. In contrast, the cell proliferation and wound closure decreased with increasing concentration of PEVs. DEVs enhanced Ca/P deposition on the titanium surface, which suggests improvement in bone bonding ability of the implant (i.e., osteointegration). EVs also increased production of Ca and P by osteoblasts and promoted the deposition of mineral phase, which suggests EVs play key roles in cell mineralization. We also found that DEVs stimulated the secretion of secondary EVs observed by the presence of protruding structures on the cell membrane. We concluded that, by functionalizing implant surfaces with specialized EVs, we will be able to enhance implant osteointegration by improving hydroxyapatite formation directly at the surface and potentially circumvent aseptic loosening of implants.

Influence of bisphosphonates on oral implantology: Sodium alendronate and zoledronic acid enhance the synthesis and activity of matrix metalloproteinases by gingival fibroblasts seeded on titanium

OBJECTIVE

This study aimed to assess the influence of the bisphosphonates zoledronic acid and sodium alendronate on MMP-2 and MMP-9 synthesis and activity by gingival fibroblasts seeded onto titanium substrate.

DESIGN

Titanium discs were placed in 24-well cell culture plates and gingival fibroblasts were seeded (1 × 10⁵ cells/discs) on them using Dulbecco's Modified Eagle's Medium (DMEM) + 10 % fetal bovine serum (FBS) for 24 h. After this period, a fresh serum-free DMEM containing zoledronic acid or sodium alendronate at 0.5 μM, 1 μM or 5 μM was applied on the cells for an additional of 24 h. Serum-free DMEM and tumor necrosis factor alpha (TNF-α) were used as negative and positive controls, respectively. MMP-2 and MMP-9 synthesis and activity were determined by ELISA (Enzyme-Linked Immunosorbent Assay) and conventional/in situ zymography. Quantitative data were analyzed by one-way ANOVA and Tukey's tests (α = 0.05). The in situ zymography data were qualitatively described.

RESULTS

Despite both bisphosphonates increased the MMPs synthesis, this effect was significant higher in zoledronic acid groups. MMPs activity resembled by gelatinolytic activity was also enhanced by sodium alendronate and zoledronic acid in a similar pattern.

CONCLUSIONS

Zoledronic acid and sodium alendronate increased in a dose-dependent manner MMP-2 and MMP-9 synthesis by gingival fibroblasts seeded on titanium. MMP-2 activity was up-regulated by zoledronic acid treatment.

Effects of EGF-coated titanium surfaces on adhesion and metabolism of bisphosphonate-treated human keratinocytes and gingival fibroblasts

OBJECTIVE

To assess the effects of epidermal growth factor (EGF)-coated titanium (Ti) discs on the adhesion and metabolism of keratinocytes and gingival fibroblasts exposed to nitrogen-containing bisphosphonates.

MATERIALS AND METHODS

Keratinocytes and fibroblasts were seeded (1 × 10⁵ cells/disc) on Ti discs coated with EGF (100 nM). After 24 h, cells were exposed or not to sodium alendronate (SA) or zoledronic acid (ZA) at different concentrations (0 = control, 0.5, 1, or 5 μM) for 48 h. Cell adhesion to the substrates was evaluated by fluorescence microscopy. Cell viability (alamarBlue, n = 6) and synthesis of vascular endothelial growth factor (VEGF), matrix metalloproteinase-2 (MMP-2), and keratinocytes growth factor (KGF) (ELISA, n = 6) were assessed. Data were statistically analyzed by one-way ANOVA and Tukey tests (α = 0.05).

RESULTS

Higher cell adhesion rate was observed when keratinocytes and fibroblasts were seeded onto EGF-coated discs in comparison to uncoated discs. ZA treatment hindered the adhesion of both cell lines on the Ti discs as well as reduced the viability and synthesis of VEGF, KGF and MMP-2 by cells (p < 0.05). SA treatment did not affect cell viability, but interfered negatively on the adhesion and synthesis of EGF and KGF by the cells (p < 0.05). EGF-coated surface increased cell viability and synthesis of growth factors as well as downregulated the synthesis of MMP-2 in comparison to control (p < 0.05).

CONCLUSION

EGF applied on Ti surface improves the biological responses of oral mucosa cells exposed to SA and ZA.

CLINICAL RELEVANCE

EGF-coating on titanium may be a suitable strategy to improve oral mucosa cellular events related to biological sealing, especially for patients under bisphosphonate therapy.

Photobiomodulation using LLLT and LED of cells involved in osseointegration and peri-implant soft tissue healing

This study evaluated the influence of photobiomodulation (PBM) using low-level laser therapy (PBM/LLLT) or light-emitting diode (PBM/LED) therapy on peri-implant tissue healing. A laboratory model was used to assess the adhesion and metabolism of osteoblasts (SaOs-2), human gingival fibroblasts (HGF), and normal oral keratinocytes (NOK) seeded on a titanium (Ti) surface. After seeding the cells on disks of Ti placed in wells of 24-well plates, three irradiations were performed every 24 h at energy density of 3 J/cm². For PBM/LLLT, a LaserTABLE device was used with a wavelength of 780 nm and 25 mW, while for PBM/LED irradiation, a LEDTABLE device was used at 810 nm, 20 mW, at a density of 3 J/cm². After irradiations, the number of cells (NC) attached and spread on the Ti surface, cell viability (CV), total protein (TP), and collagen (Col) synthesis were assessed. Alkaline phosphate activity (ALP) was evaluated only for SaOs-2. Data were submitted to ANOVA complemented by Turkey statistical tests at a 5% significance level. PBM significantly increased adherence of NOK to the Ti surface, while no significant effect was observed for SaOs-2 and HGF. PBM positively affected CV, as well as Col and TP synthesis, in distinct patterns according to the cell line. Increased ALP activity was observed only in those cells exposed to PBM/LLLT. Considering cell specificity, this investigation reports that photobiomodulation with low-power laser and LED at determined parameters enhances cellular functions related to peri-implant tissue healing in a laboratory model.

Biofunctionalization of Microgroove Surfaces with Antibacterial Nanocoatings

Objectives

To investigate the physical properties of the modified microgroove (MG) and antibacterial nanocoated surfaces. In addition, the biological interactions of the modified surfaces with human gingival fibroblasts (HGFs) and the antibacterial activity of the surfaces against Porphyromonas gingivalis were studied.

Methods

The titanium nitride (TiN) and silver (Ag) coatings were deposited onto the smooth and MG surfaces using magnetron sputtering. A smooth titanium surface (Ti-S) was used as the control. The physicochemical properties including surface morphology, roughness, and hydrophilicity were characterized using scanning electron microscopy, atomic force microscopy, and an optical contact angle analyzer. The "contact guidance" morphology was assessed using confocal laser scanning microscopy. Cell proliferation was analyzed using the Cell Counting Kit-8 assay. The expression level of the main focal adhesion-related structural protein vinculin was compared using quantitative reverse transcription PCR and Western blotting. The antibacterial activity against P. gingivalis was evaluated using the LIVE/DEAD BacLight™ Bacterial Viability Kit.

Results

The Ag and TiN antibacterial nanocoatings were successfully deposited onto the smooth and MG surfaces using magnetron sputtering technology. TiN coating on a grooved surface (TiN-MG) resulted in less nanoroughness and greater surface hydrophilicity than Ag coating on a smooth surface (Ag-S), which was more hydrophobic. Cell proliferation and expression of vinculin were higher on the TiN-MG surface than on the Ag-coated surfaces. Ag-coated surfaces showed the strongest antibacterial activity, followed by TiN-coated surfaces.

Conclusion

Nano-Ag coating resulted in good antimicrobial activity; however, the biocompatibility was questionable. TiN nanocoating on an MG surface showed antibacterial properties with an optimal biocompatibility and maintained the "contact guidance" effects for HGFs.

In vitro effects of photobiomodulation applied to gingival fibroblasts cultured on titanium and zirconia surfaces and exposed to LPS from Escherichia coli

Photobiomodulation (PBM) therapy is used to stimulate cell proliferation and metabolism, as well as reduce inflammatory cytokine synthesis, which plays a main role in the long-term stability of implants. This study assessed the response of gingival fibroblasts cultured on titanium (Ti) and zirconia (ZrO₂), submitted to PBM and exposed to lipopolysaccharide (LPS). Cells seeded on Ti and ZrO₂ were irradiated (InGaAsP; 780 nm, 25 mW) 3 times, using 0.5, 1.5, and 3.0 J/cm² doses, and exposed to Escherichia coli LPS (1 μg/mL). After 24 h, cell viability (alamarBlue, n = 8), interleukin 6 (IL-6) and 8 (IL-8) synthesis (ELISA, n = 6), and IL-6 and vascular endothelial growth factor (VEGF) gene expression (qPCR, n = 5) were assessed and statistically analyzed (one-way ANOVA, α = 0.05). Cell morphology was evaluated by fluorescence microscopy. Increased cell viability occurred in all groups cultured on Ti compared with that of the control, except for cells exposed to LPS. Fibroblasts cultured on ZrO₂ and LPS-exposed exhibited reduced viability. PBM at 3.0 J/cm² and 1.5 J/cm² downregulated the IL-6 synthesis by fibroblasts seeded on Ti and ZrO₂, as well as IL-8 synthesis by cells seeded on ZrO₂. Fibroblasts seeded on both surfaces and LPS-exposed showed increased IL-6 gene expression; however, this activity was downregulated when fibroblasts were irradiated at 3.0 J/cm². Enhanced VEGF gene expression by cells seeded on Ti and laser-irradiated (3.0 J/cm²). Distinct patterns of cytoskeleton occurred in laser-irradiated cells exposed to LPS. Specific parameters of PBM can biomodulate the inflammatory response of fibroblasts seeded on Ti or ZrO₂ and exposed to LPS.

Cytotoxicity of acrylic resin-based materials used to fabricate interim crowns

STATEMENT OF PROBLEM

If the components in the acrylic resins used to fabricate interim crows are cytotoxic, they can interfere with the integrity of the adjacent periodontal tissue and the dentin-pulp complex.

PURPOSE

The purpose of this in vitro study was to assess the cytotoxicity of resin-based materials used to prepare interim crowns.

MATERIAL AND METHODS

The following materials were used in this study: CAR, conventional acrylic resin powder and liquid; BR, bis-acrylic resin; and PAR, pressed acrylic resin of the CAD-CAM type. Glass disks were used as the control (Co). Oral epithelial cells (NOK) were seeded on glass disks and standardized disks prepared with the resins under study. After incubation for 24 hours, the cells were analyzed for viability (Alamar Blue and Live or Dead), adhesion, and morphology (SEM and fluorescence), as well as epidermal growth factor synthesis (EGF-ELISA). The surface roughness (Ra) of test specimens was evaluated under a confocal microscope. The data were submitted to ANOVA and the Tukey HSD statistical tests (α=.05).

RESULTS

The highest Ra value was observed in BR in comparison with CAR, PAR, and Co (P<.05). The highest viability, adhesion, and EGF synthesis values were determined for the cells in contact with PAR (P<.001).

CONCLUSIONS

The computer-aided design and computer-aided manufacturing (CAD-CAM)-type resin favored adhesion, metabolism, and epithelial cell proliferation, and it was therefore considered cytocompatible.