Hunter-Schreger Band configuration in human molars reveals more decussation in the lateral enamel of 'functional' cusps than 'guiding' cusps

High throughput automated characterization of enamel microstructure using synchrotron tomography and optical flow imaging

The remarkable damage-tolerance of enamel has been attributed to its hierarchical microstructure and the organized bands of decussated rods. A thorough characterization of the microscale rod evolution within the enamel is needed to elucidate this complex structure. While prior efforts in this area have made use of single particle tracking to track a single rod evolution to various degrees of success, such a process can be both computationally and labor intensive, limited to the evolution path of a single rod, and is therefore prone to error from potentially tracking outliers. Particle image velocimetry (PIV) is a well-established algorithm to derive field information from image sequences for processes that are time-dependent, such as fluid flows and structural deformation. In this work, we demonstrate the use of PIV in extracting the full-field microstructural distribution of rods within the enamel. Enamel samples from a wild African lion were analyzed using high-energy synchrotron X-ray micro-tomography. Results from the PIV analysis provide sufficient full-field information to reconstruct the growth of individual rods that can potentially enable rapid analysis of complex microstructures from high resolution synchrotron datasets. Such information can serve as a template for designing damage-tolerant bioinspired structures for advanced manufacturing. STATEMENT OF SIGNIFICANCE: Thorough characterization and analysis of biological microstructures (viz. dental enamel) allows us to understand the basis of their excellent mechanical properties. Prior efforts have successfully replicated these microstructures via single particle tracking, but the process is computationally and labor intensive. In this work, optical flow imaging algorithms were used to extract full-field microstructural distribution of enamel rods from synchrotron X-ray computed tomography datasets, and a field method was used to reconstruct the growth of individual rods. Such high throughput information allows for the rapid production/prototyping and advanced manufacturing of damage-tolerant bioinspired structures for specific engineering applications. Furthermore, the algorithms used herein are freely available and open source to broaden the availability of the proposed workflow to the general scientific community.

Variation in enamel prism size in primate molars

OBJECTIVE

This study examines whether larger enamel prism diameters accommodate a greater enamel volume from the enamel-dentine junction (EDJ) to the outer-enamel surface (OES) in primate molars, and how prism size relates to enamel thickness and crown location.

DESIGN

We assessed variation in enamel prism diameter in relation to crown location and enamel thickness in catarrhine lower molars (n = 14 species) and one platyrrhine. Prism diameter and enamel thickness were recorded in four locations (lingual lateral; lingual cuspal; buccal cuspal; buccal lateral), using a buccal-lingual section through the centre of the mesial cusps. Ten prism diameter readings were collected at inner (near the EDJ), outer (near the OES) and middle (between the two locations) enamel for each location.

RESULTS

Mean prism diameter values for each species were similar (range: 4.06 µm to 5.81 µm). Prism diameter enlarged from inner to outer enamel, suggesting larger prisms help accommodate the increase in enamel volume from the EDJ to the OES. Average prism diameter does not associate with enamel thickness. Instead, cuspal positions had significantly smaller prism diameter at the EDJ than lateral positions, and larger prism sizes at the OES, leading to an overall similar prism diameter mean for all positions (Lingual lateral: 5.11 µm; Lingual cuspal: 5.04 µm; Buccal cuspal: 4.78 µm; Buccal lateral: 4.99 µm).

CONCLUSIONS

Our study revealed consistent average enamel prism diameters in various crown locations of lower primate molars, potentially contributing to the mechanical integrity and functional optimization of enamel in primates.

A novel image processing procedure for the quantitative evaluation of dental enamel prism arrangement

Enamel prism is the main microstructural unit of mammalian enamel which composed of hundreds of bioapatite nanocrystals. Prism structure plays a key role in the excellent mechanical performance of dental enamel during millions of chewing cycles without significant remodeling. Thus, quantitative understanding of prism architecture is of utmost importance for biomechanical materials design. To characterize enamel prism orientation quantitatively, a novel image processing method has been developed. Our method is based on scanning electron microscopy images of etched enamel surface and consists of an ellipse fitting procedure, which provides a numerical approximation of prism shape and orientation in the studied cross section. The obtained analytical data allow to construct color coded orientation maps, which provide quick and useful insight into the microstructure of enamel. Besides striking visualization, orientation maps allow to extract and plot the rich information on the azimuthal and inclination angles of the prisms as function of location. Numerical data on prism arrangement can be analyzed using statistical tools over large areas, which paves the way towards quantifying comparative investigation of prism arrangement either in dentistry research or evolution biology. The application of the method is demonstrated for a distal-mesial cross-section of sound human tooth enamel. HIGHLIGHTS: Scanning electron microscopy images of etched enamel surface are analyzed using ellipse fitting. Geometrical parameters of the fitted ellipses provide numerical data of thousands of prisms. Prism arrangement is visualized on color coded orientation maps and analyzed using statistical tools.

Tooth chipping patterns and dental caries suggest a soft fruit diet in early anthropoids

OBJECTIVES

Fossils from the Fayum Depression, Egypt, are crucial for understanding anthropoid evolution due to the abundance of taxa and the time interval they represent (late Eocene to early Oligocene). Dietary and foraging behavioral interpretations suggest fruits were their dominant food source, although hard foods (e.g., seeds and nuts) and leaves could have been important dietary components for particular groups. In this study, we compare dental chipping patterns in five Fayum primate genera with chipping data for extant primates, to assess potential hard object feeding in early anthropoids.

MATERIALS AND METHODS

Original specimens were studied (Aegyptopithecus: n = 100 teeth; Parapithecus: n = 72, Propliopithecus: n = 99, Apidium: n = 82; Catopithecus: n = 68); with the number, severity, and position of chips recorded. Dental caries was also recorded, due to its association with soft fruit consumption in extant primates.

RESULTS

Tooth chipping was low across all five genera studied, with a pooled chipping prevalence of 5% (21/421). When split into the three anthropoid families represented, chipping prevalence ranged from 2.6% (4/154) in Parapithecidae, 6% (12/199) in Propliopithecidae, and 7.4% (5/68) in Oligopithecidae. Three carious lesions were identified in Propliopithecidae.

DISCUSSION

The chipping prevalence is low when compared to extant anthropoids (range from 4% to 40%) and is consistent with a predominantly soft fruit diet, but not with habitual hard food mastication. The presence of caries supports consumption of soft, sugary fruits, at least in Propliopithecidae. Our results add support for low dietary diversity in early anthropoids, with soft fruits as likely dominant food sources.

How mangabey molar form differs under routine vs. fallback hard-object feeding regimes

Background

Components of diet known as fallback foods are argued to be critical in shaping primate dental anatomy. Such foods of low(er) nutritional quality are often non-preferred, mechanically challenging resources that species resort to during ecological crunch periods. An oft-cited example of the importance of dietary fallbacks in shaping primate anatomy is the grey-cheeked mangabey Lophocebus albigena. This species relies upon hard seeds only when softer, preferred resources are not available, a fact which has been linked to its thick dental enamel. Another mangabey species with thick enamel, the sooty mangabey Cercocebus atys, processes a mechanically challenging food year-round. That the two mangabey species are both thickly-enameled suggests that both fallback and routine consumption of hard foods are associated with the same anatomical feature, complicating interpretations of thick enamel in the fossil record. We anticipated that aspects of enamel other than its thickness might differ between Cercocebus atys and Lophocebus albigena. We hypothesized that to function adequately under a dietary regime of routine hard-object feeding, the molars of Cercocebus atys would be more fracture and wear resistant than those of Lophocebus albigena.

Methods

Here we investigated critical fracture loads, nanomechanical properties of enamel, and enamel decussation in Cercocebus atys and Lophocebus albigena. Molars of Cercopithecus, a genus not associated with hard-object feeding, were included for comparison. Critical loads were estimated using measurements from 2D µCT slices of upper and lower molars. Nanomechanical properties (by nanoindentation) and decussation of enamel prisms (by SEM-imaging) in trigon basins of one upper second molar per taxon were compared.

Results

Protocone and protoconid critical fracture loads were significantly greater in Cercocebus atys than Lophocebus albigena and greater in both than in Cercopithecus. Elastic modulus, hardness, and elasticity index in most regions of the crown were greater in Cercocebus atys than in the other two taxa, with the greatest difference in the outer enamel. All taxa had decussated enamel, but that of Cercocebus atys uniquely exhibited a bundle of transversely oriented prisms cervical to the radial enamel. Quantitative comparison of in-plane and out-of-plane prism angles suggests that decussation in trigon basin enamel is more complex in Cercocebus atys than it is in either Lophocebus albigena or Cercopithecus cephus. These findings suggest that Cercocebus atys molars are more fracture and wear resistant than those of Lophocebus albigena and Cercopithecus. Recognition of these differences between Cercocebus atys and Lophocebus albigena molars sharpens our understanding of associations between hard-object feeding and dental anatomy under conditions of routine vs. fallback hard-object feeding and provides a basis for dietary inference in fossil primates, including hominins.

Variation in enamel mechanical properties throughout the crown in catarrhine primates

Enamel mechanical properties vary across molar crowns, but the relationship among mechanical properties, tooth function, and phylogeny are not well understood. Fifteen primate lower molars representing fourteen taxa (catarrhine, n = 13; platyrrhine, n = 1) were sectioned in the lingual-buccal plane through the mesial cusps. Gradients of enamel mechanical properties, specifically hardness and elastic modulus, were quantified using nanoindentation from inner (near the enamel-dentine junction), through middle, to outer enamel (near the outer enamel surface) at five positions (buccal lateral, buccal cuspal, occlusal middle, lingual cuspal, lingual lateral). Cuspal positions had higher mechanical property values than lateral positions. Middle enamel had higher mean hardness and elastic modulus values than inner and outer locations in all five crown positions. Functionally, the thicker-enameled buccal cusps of lower molars did not show evidence of increased resistance to failure; instead, lingual cusps-which show higher rates of fracture-had higher average mechanical property values, with no significant differences observed between sides. Preliminary phylogenetic results suggest there is relatively little phylogenetic signal in gradients of mechanical properties through the enamel or across the crown. There appears to be common mechanical property patterns across molar crowns in Catarrhini and potentially among primates more broadly. These results may allow more precise interpretations of dental biomechanics and processes resulting in mechanical failure of enamel in primates, such as wear and fracture.

Variation in enamel and dentine mineral concentration and density in primate molars

OBJECTIVE

Variation in enamel and dentine mineral concentration and total effective density can be reliably collected using Micro-CT scans. Both variables are suggested to reflect mechanical properties such as hardness and elastic modulus in dental tissues, meaning Micro-CT methods allow relative composition and mechanical properties to be collected non-destructively.

DESIGN

16 lower molars from 16 Catarrhine primates were Micro-CT scanned alongside hydroxyapatite phantoms using standardized settings and methods to calculate mineral concentration and total effective density. Mineral concentration, total effective density and thickness of dentine and enamel were calculated for four cusps, representing each 'corner' of the tooth and four lateral crown positions (i.e., mesial, buccal, lingual and distal).

RESULTS

The results show mean mineral concentration and total effective density values were higher in areas of thicker enamel, while the opposite was observed for dentine. Buccal positions had significantly higher mineral concentration and total effective density values than lingual areas. Cuspal positions had higher mean values than lateral enamel, for both dentine (mineral concentration cuspal: 1.26 g/cm³; lateral: 1.20 g/cm³) and enamel (mineral concentration cuspal: 2.31 g/cm³; lateral: 2.25 g/cm³). Mesial enamel had significantly lower values than other locations.

CONCLUSIONS

These common patterns across Catarrhine taxa may be linked to functional adaptations related to optimization of mastication and tooth protection. Variation in mineral concentration and total effective density may also be associated with wear and fracture patterns, and can be used as baseline information to investigate the effect of diet, pathological changes and aging on teeth through time.

Dental topography of the Oligocene anthropoids Aegyptopithecus zeuxis and Apidium phiomense: Paleodietary insights from analysis of wear series

Fossil primate dietary inference is enhanced when ascertained through multiple, distinct proxies. Dental topography can be used to assess changes in occlusal morphology with macrowear, providing insight on tooth use and function across the lifespans of individuals. We measured convex Dirichlet normal energy-a dental topography metric reflecting occlusal sharpness of features such as cusps and crests-in macrowear series of the second mandibular molars of two African anthropoid taxa from ∼30 Ma (Aegyptopithecus zeuxis and Apidium phiomense). Wear was quantified via three proxies: occlusal dentine exposure, inverse relief index, and inverse occlusal relief. The same measurements were calculated on macrowear series of four extant platyrrhine taxa (Alouatta, Ateles, Plecturocebus, and Sapajus apella) to provide an analogical framework for dietary inference in the fossil taxa. We predicted that Ae. zeuxis and Ap. phiomense would show similar patterns in topographic change with wear to one another and to extant platyrrhine frugivores like Ateles and Plecturocebus. The fossil taxa have similar distributions of convex Dirichlet normal energy to one another, and high amounts of concave Dirichlet normal energy 'noise' in unworn molars-a pattern shared with extant hominids that may distort dietary interpretations. Inverse relief index was the most useful wear proxy for comparison among the taxa in this study which possess disparate enamel thicknesses. Contrary to expectations, Ae. zeuxis and Ap. phiomense both resemble S. apella in exhibiting an initial decline in convex Dirichlet normal energy followed by an increase at the latest stages of wear as measured by inverse relief index, lending support to previous suggestions that hard-object feeding played a role in their dietary ecology. Based on these results and previous analyses of molar shearing quotients, microwear, and enamel microstructure, we suggest that Ae. zeuxis had a pitheciine-like strategy of seed predation, whereas Ap. phiomense potentially consumed berry-like compound fruits with hard seeds.

Synchrotron X-ray Studies of the Structural and Functional Hierarchies in Mineralised Human Dental Enamel: A State-of-the-Art Review

Hard dental tissues possess a complex hierarchical structure that is particularly evident in enamel, the most mineralised substance in the human body. Its complex and interlinked organisation at the Ångstrom (crystal lattice), nano-, micro-, and macro-scales is the result of evolutionary optimisation for mechanical and functional performance: hardness and stiffness, fracture toughness, thermal, and chemical resistance. Understanding the physical-chemical-structural relationships at each scale requires the application of appropriately sensitive and resolving probes. Synchrotron X-ray techniques offer the possibility to progress significantly beyond the capabilities of conventional laboratory instruments, i.e., X-ray diffractometers, and electron and atomic force microscopes. The last few decades have witnessed the accumulation of results obtained from X-ray scattering (diffraction), spectroscopy (including polarisation analysis), and imaging (including ptychography and tomography). The current article presents a multi-disciplinary review of nearly 40 years of discoveries and advancements, primarily pertaining to the study of enamel and its demineralisation (caries), but also linked to the investigations of other mineralised tissues such as dentine, bone, etc. The modelling approaches informed by these observations are also overviewed. The strategic aim of the present review was to identify and evaluate prospective avenues for analysing dental tissues and developing treatments and prophylaxis for improved dental health.