The correlation between immediate radiolucent lines and early implant migration in cemented acetabular components

The addition of a flange does not improve the pressure generated during cemented acetabular cup implantation

Flanged acetabular cups were developed with the rationale that, at insertion, they would increase the pressure of the cement and improve penetration of cement into the acetabular bone. Various studies have been inconclusive regarding their effectiveness. In this work, we aimed to eliminate all confounding factors and measure the pressures generated during acetabular pressurization and cup implantation using a simplified steel acetabulum, high precision pressure transducers, proper surgical techniques and two acetabular cups, identical apart from the addition of a flange to one. It was found that the flanged acetabular component did not significantly increase the pressure in the acetabulum and in some cases reduced the pressures generated when compared to an unflanged cup. The addition of a flange did not reduce the pressure differential between the pole and the rim of the acetabulum, nor did it have a significant effect on pressure lost over the cup implantation period. It was concluded that flanged acetabular cups provide no significant improvement in the pressures generated in the acetabulum during acetabular cup implantation. It is hypothesized that the flange may be seen as a design feature intended to slow the insertion of the cup into the cement, thus requiring the surgeon to apply a larger load in order to correctly position the acetabular cup; in this way larger pressure will be generated.

Does vacuum mixing affect diameter shrinkage of a PMMA cement mantle during in vitro cemented acetabulum implantation?

Radiolucent lines on immediate postoperative cemented acetabular component radiographs between the PMMA bone cement mantle and bone are an indicator of an increased risk of early loosening. The cause of these lines has yet to be identified. Thermal and chemical necrosis, fluid interposition and cement shrinkage have all been suggested in the literature. The aim of the study reported here was to take an engineering approach - eliminating confounding variables present during surgery - to quantify the size of the interstice created by cement shrinkage when a 50 mm diameter flanged acetabular cup is implanted in a model acetabulum with a 52 mm hemispherical bore under controlled conditions using vacuum and non-vacuum mixed cement. Irrespective of the mixing method used, a significant interstice was created between the bone cement and the mock acetabulum. When the cement was mixed under vacuum the interstice created between the mock acetabulum and the cement mantle was 0.60 mm ± 0.09 mm; when the cement was mixed under non-vacuum conditions the interstice created was 0.39 mm ± 0.15 mm. Possible explanations for radiolucent lines are discussed.

Progressive radiolucent lines following the implantation of the cemented Rimfit acetabular component in total hip arthroplasty using the rimcutter technique: cause for concern?

AIMS

The highly cross-linked polyethylene Exeter RimFit flanged cemented acetabular component was introduced in the United Kingdom in 2010. This study aimed to examine the rates of emergence of radiolucent lines observed when the Rimfit acetabular component was implanted at total hip arthroplasty (THA) using two different techniques: firstly, the 'rimcutter' technique in which the flange sits on a pre-prepared acetabular rim; and secondly, the 'trimmed flange' technique in which the flange is trimmed and the acetabular component is seated inside the rim of the acetabulum.

PATIENTS AND METHODS

The radiographs of 150 THAs (75 'rimcutter', 75 'trimmed flange') involving this component were evaluated to assess for radiolucencies at the cement/bone interface by three observers.

RESULTS

Rimfit acetabular components implanted using the rimcutter technique had significantly higher rates of radiolucency than those introduced using the 'trimmed flange' technique one year post-operatively (one zone: 63/75 (84%) vs 17/75 (23%); two zones 42/75 (56%) vs 0/75 (0%); all three zones 17/75 (23%) vs 0/75 (0%):(all p < 0.001).

CONCLUSION

On the basis of these findings, we have stopped using the 'rimcutter' technique when implanting the Rimfit acetabular component and have reverted to the 'trimmed flange' technique.

TAKE HOME MESSAGE

Surgeons should be vigilant of the performance of the Rimfit acetabular component when used alongside the rim cutter device due to an observed higher rate of progressive radiolucencies with this combination of component / technique.

Adherence of hip and knee arthroplasty studies to RSA standardization guidelines. A systematic review

BACKGROUND AND PURPOSE

Guidelines for standardization of radiostereometry (RSA) of implants were published in 2005 to facilitate comparison of outcomes between various research groups. In this systematic review, we determined how well studies have adhered to these guidelines.

METHODS

We carried out a literature search to identify all articles published between January 2000 and December 2011 that used RSA in the evaluation of hip or knee prosthesis migration. 2 investigators independently evaluated each of the studies for adherence to the 13 individual guideline items. Since some of the 13 points included more than 1 criterion, studies were assessed on whether each point was fully met, partially met, or not met.

RESULTS

153 studies that met our inclusion criteria were identified. 61 of these were published before the guidelines were introduced (2000-2005) and 92 after the guidelines were introduced (2006-2011). The methodological quality of RSA studies clearly improved from 2000 to 2011. None of the studies fully met all 13 guidelines. Nearly half (43) of the studies published after the guidelines demonstrated a high methodological quality and adhered at least partially to 10 of the 13 guidelines, whereas less than one-fifth (11) of the studies published before the guidelines had the same methodological quality. Commonly unaddressed guideline items were related to imaging methodology, determination of precision from double examinations, and also mean error of rigid-body fitting and condition number cutoff levels.

INTERPRETATION

The guidelines have improved methodological reporting in RSA studies, but adherence to these guidelines is still relatively low. There is a need to update and clarify the guidelines for clinical hip and knee arthroplasty RSA studies.

Implants for total hip arthroplasty

This article is a comprehensive review of the published literature on total hip replacement design. It seeks to provide a nonbiased view of the technology related to total hip implants and bearing surfaces. Implant designs and fixation methods are discussed with summaries of their respective long-term outcome studies. Fixation methods include cemented, cementless and hybrid techniques and are explained and presented with current outcome data and their respective failure modes that have promoted new technological development. The current data point toward cementless acetabular fixation as being superior to cemented fixation. As for stem fixation, there are good data to suggest that either method of fixation is acceptable in the proper setting. Also included in this article is a brief review of bearing surfaces and hip biomechanics.

Benefits of using modern cementing techniques in the acetabulum: the Rim Cutter

PURPOSE

To compare radiological records of 90 consecutive patients who underwent cemented total hip arthroplasty (THA) with or without use of the Rim Cutter to prepare the acetabulum.

METHODS

The acetabulum of 45 patients was prepared using the Rim Cutter, whereas the device was not used in the other 45 patients. Postoperative radiographs were evaluated using a digital templating system to measure (1) the positions of the operated hips with respect to the normal, contralateral hips (the centre of rotation of the socket, the height of the centre of rotation from the teardrop, and lateralisation of the centre of rotation from the teardrop) and (2) the uniformity and width of the cement mantle in the 3 DeLee Charnley acetabular zones, and the number of radiolucencies in these zones.

RESULTS

The study group showed improved radiological parameters and were closer to the anatomic centre of rotation both vertically (1.5 vs. 3.7 mm, p<0.001) and horizontally (1.8 vs. 4.4 mm, p<0.001) and had consistently thicker and more uniform cement mantles (p<0.001). There were 2 radiolucent lines in the control group but none in the study group.

CONCLUSION

The Rim Cutter resulted in more accurate placement of the centre of rotation of a cemented prosthetic socket, and produced a thicker, more congruent cement mantle with fewer radiolucent lines.

Lamination for subdermal implant fixation

Thirty-six aluminum oxide laminated discs were implanted into 12 young rabbits (18 with a 0.5-mm porous layer and 18 with 1 mm) to determine whether implants that are porous only on one side could fixate to subcutaneous tissue. After 3 months, discs were encased within thin pouches (0.02-0.14 mm) of fibrous connective tissue, as would have been expected of a completely porous implant. Solid sides showed no, while the porous sides showed little, attachment to pouches. Forty-seven percentage (17) of the discs had moved 1.4 +/- 0.8 cm beyond the 4.7 + 1 cm they had moved due to normal skin growth, while two others had moved between 6.2 and 6.5 cm beyond this measure. The proportion of 1 mm porous layer discs migrating within subcutaneous tissue was no greater than the proportion of 0.5 mm layer discs migrating (p = 0.15). Porous layer height and disc migration did not affect the attachment strength of pouch to surrounding tissues (68 +/- 23 N, p = 0.34). Pouch thickness, which has been associated to the level of applied forces in other studies, increased with migration distance (p = 0.054). Results indicate that one-sided porous discs are likely easier to retrieve than completely porous ones, but cannot be prevented from migrating in loose tissue of young animals. Data is being used to design subdermal radio frequency devices for endangered marine animals.