Influence of the sagittal reference axis on the femoral component size

"Grand-piano sign" as a femoral rotational indicator in both varus and valgus knees: a simulation study of anterior resection surface in total knee arthroplasty

PURPOSE

The "Grand-piano sign" is a popular indicator of the appropriate rotational alignment of the femoral component during total knee arthroplasty (TKA). The aim of the study was to investigate the shape of the anterior femoral resection surface of varus and valgus knees.

METHODS

A cohort of 80 varus knees and 40 valgus knees (hip-knee-ankle angle > 2° for varus and < - 2° for valgus knees) matched for age, sex, height, body weight, and KL grade was made using propensity score matching. Virtual TKA was performed using 3 patterns of components (anterior flange flexion angles of 3°, 5°, and 7°). The anterior femoral resection surface was evaluated for 3 patterns of rotational alignments: parallel to the surgical epicondylar axis (NR, neutral rotation), 3° internal rotation (IR), and 3°external rotation (ER) relative to the surgical epicondylar axis. In each anterior femoral resection surface, the vertical height of medial and lateral condyles was measured, and the ratio of the medial to the lateral height (M/L ratio) was evaluated.

RESULTS

The M/L ratio in NR for both varus and valgus knees was 0.57 to 0.64, with no significant difference between the cohorts (p value > 0.05). The M/L ratio showed a similar pattern of increasing at IR and decreasing at ER in both varus and valgus knees. The variation in the M/L ratio with malrotation in valgus knees was smaller than in varus knees.

CONCLUSION

During TKA, the anterior femoral resection surface was similar in varus and valgus knees; however, the variation with malrotation was smaller in valgus knees than in varus knees. TKA for valgus knees requires precise surgical technique and careful intraoperative assessment.

LEVEL OF EVIDENCE

IV, Case series.

Clinical three-dimensional anatomy of the femur considering navigation-aided surgery of total knee arthroplasty in Japanese patients

PURPOSE

Few studies exist regarding sagittal alignment describing femur morphology in navigation-aided surgery. This study investigated the three-dimensional (3D) sagittal femoral alignment of the whole femur.

METHODS

Seventy-three consecutive patients (59 females, 14 males, mean age: 76.1 years), yielding 140 femurs, were included in this study. A computed-tomography-based patient-specific 3D femur model was used to define a mechanical axis-based reference plane. Proximal and distal femoral axis angles (PFA, DFA) to the reference plane were measured in 3D using custom software. PFA and DFA represent the proximal and distal inclination of the femoral anatomical axis in sagittal plane, respectively.

RESULTS

PFA (10.6 ± 1.5°) was greater than DFA (2.6 ± 1.6°; P < 0.0001). DFA in females (2.3 ± 1.4°) was smaller than in males (3.9 ± 1.7°; P < 0.0001).

CONCLUSION

This is the first report of measurement of femoral sagittal alignment related to both 3D anatomy and decision making of femoral flexion angle using navigation surgery for total knee arthroplasty. This report shows a robust DFA measurement that could be used as a template for femoral implants flexion angle when performing both conventional and navigated total knee arthroplasty.

Improved surgical procedure of primary constrained total knee arthroplasty which enables use of the femoral diaphyseal straight extension stem

Background

In performing primary constrained total knee arthroplasties (TKA) to imbalanced knees, the offset stem is sometimes compelled to use, although this is associated with surgical difficulties. We developed a modified procedure which might be able to fit the anteroposterior (AP) and mediolateral (ML) position of the femoral component simultaneously with the straight stem. Purposes of this study were to evaluate usefulness of the modified procedure both in computer simulations and actual surgeries.

Methods

We included 32 knees that had undergone primary TKA using constrained implants because of the coronal imbalance. In the component-first procedure, the distal femur was prepared to fit the AP and ML position of the femoral component simultaneously at first, as in primary TKA. Finally, the stem hole is created based on the femoral component position (the component-first procedure). The femoral component and extension stem were simulated using the three-dimensional planning software (ZedKnee) following the component-first procedure. We investigated the suitability of the straight stem through computer simulation and evaluation of actual surgeries. Clinical and radiographical outcomes were also evaluated at the latest follow-up.

Results

The component-first procedure enabled the AP and ML position of the femoral component to be fitted simultaneously with the straight stem in simulations and actual surgeries in all cases. The stem diameter was not significantly different between simulations and actual surgeries (13.9 and 13.7 mm on average, respectively, p = 0.479) and almost similar from intraclass correlation coefficient analysis (kappa value 0.790). Clinical and radiographical outcomes were almost similar to primary TKA cases and there was no case of component loosening, cortical bone hypertrophy around the stem and stem-tip pain.

Conclusions

Our improved surgical procedure may facilitate use of the constrained implant for more cases of primary TKA in imbalanced knees without the usual surgical difficulties.

Trial registration

Retrospectively registered.

Sexual dimorphism and racial diversity render bone-implant mismatch inevitable after off-the-shelf total knee arthroplasty: a systematic review and meta-analysis

PURPOSE

The purpose of this systematic review and meta-analysis was to investigate the variability in femoral geometric ratios among knees of different sexes and races, and to appreciate whether the observed variability is accommodated by commonly implanted total knee arthroplasty (TKA) components. The hypothesis was that the anthropometric studies report considerable variability of femoral geometric ratios among sexes and races.

METHODS

This systematic review and meta-analysis was performed according to the Preferred Reporting Items for Systematic reviews and Meta-analyses (PRISMA) criteria. Two authors independently conducted an electronic search using MEDLINE^® and Embase^® on 6 July 2020 for clinical studies reporting on femoral geometric ratios among sexes and races. Femoral geometric ratios were graphically represented as means and 2 standard deviations, and compared to those of 13 commonly implanted femoral components.

RESULTS

A total of 15 studies were identified that reported on a combined total of 2627 knees; all reported the aspect ratio, and 2 also reported the asymmetry ratio and trapezoidicity ratio. Men had wider knees than women, and compared to Caucasian knees, Arabian and Indian knees were wider, while East Asian were narrower. There were no differences in asymmetry ratio between men and women, nor among Caucasian and East Asian knees. Men had more trapezoidal knees than women, and East Asian knees were more trapezoidal than Caucasian knees. The commonly implanted femoral components accommodated less than a quarter of the geometric variability observed among sexes and races.

CONCLUSION

Anthropometric studies reported considerable sexual dimorphism and racial diversity of femoral geometric ratios. Since a surgeon generally only uses one or a few TKA brands, bone-implant mismatch remains unavoidable in a large proportion of knees. These findings support the drive towards personalized medicine, and accurate bone-implant fit may only be achievable through customisation of implants, though the clinical benefits of custom TKA remain to be confirmed.

LEVEL OF EVIDENCE

IV.

Optimal Flexion for the Femoral Component in TKR: A Study of Angle Between Mechanical Axis and Distal Anatomic Intramedullary Axis Using 3D Reconstructed CT Scans in 407 Osteoarthritic Knees Studied in India

BACKGROUND

The femoral component is generally aligned perpendicularly to the distal femoral intramedullary axis with conventional instruments. Various aids like computer navigation, patient-specific instrumentation and robotic surgery use the mechanical axis as the reference for the femoral component alignment. We studied the flexion of the distal femoral intramedullary axis compared to the mechanical axis using an interactive 3D tool in 407 Indian osteoarthritic knees undergoing total knee replacement to better understand optimal flexion alignment.

MATERIALS AND METHODS

407 knees (301-Female, 106-Male) in Indian patients undergoing total knee replacement underwent CT scans. A 3D interactive knee system was used for 3D reconstruction and planning. Distal femoral flexion angle (DFFA) was calculated between the anatomic distal femoral (intramedullary) axis and the mechanical axis. Statistical analysis was performed using ANOVA test and Chi-square test using a data analysis tool pack (Analysis ToolPak by Excel Easy) additionally installed in Microsoft Excel 2010.

RESULTS

The mean DFFA was found to be 2.54 with a standard deviation of 1.38. The maximum and minimum values noted were 7.5 and 0.5 respectively. There was no correlation found between sex, age, height or weight (p > 0.05).

CONCLUSIONS

While taking the distal femur cut with systems other than an intramedullary rod, in Indian osteoarthritic knees, it would be safer to take the distal femoral cut between 2 and 3 degrees of flexion to mechanical axis, as it would ensure that the cut is within 3 degrees from the anatomic axis for 98% patients. Most surgeons routinely using navigation or similar aids take the cut at 0 degrees of flexion to the mechanical axis. This will lead to more than 3 degrees of extension with reference to the intramedullary axis in more than 39% patients. This would result in either an increase in femoral component sizing or an increased risk of notching.

A lateralized anterior flange improves femoral component bone coverage in current total knee prostheses

BACKGROUND

Poor femoral implant fit to resected bone surfaces recently has been the motivation for several new total knee arthroplasty implant designs. Implant overhang risks adverse soft-tissue interaction while uncovered cut bone surfaces (underhang) risks increased postoperative bleeding or development of heterotopic bone.

METHODS

Femoral implant fit was studied systematically, and without the influence of surgical variation, by virtually implanting standard and narrow width femoral components (Bi-Surface 5) using preoperative computed tomography data for 150 varus osteoarthritic knees in Japanese patients. Overhang and underhang rates and bone widths were determined by gender.

RESULTS

Narrow femoral components helped avoid or minimize overhang in most female and some male knees. Although anterior width in the narrow components closely matched female bone width, the femoral component was necessarily displaced laterally to avoid overhang in the anteromedial portion. Consequently, there was significant medial underhang in the distal and posterior zones.

CONCLUSIONS

Ideally, the anterior femoral flange should be shifted 2 to 2.5mm laterally relative to the distal and posterior aspects to provide optimal femoral bone coverage in this prosthesis. The current study also confirmed that this modification can be generalized to the other two currently available "narrow type" prostheses. This geometric modification might allow surgeons to select a femoral component with slightly wider mediolateral dimensions in the distal and posterior aspects to minimize underhang, while eliminating anterior overhang.

LEVEL OF EVIDENCE

III.