Scanning Electron Microscopy and Energy-Dispersive X-Ray Spectroscopy as a Valuable Tool to Investigate the Ultra-High-Molecular-Weight Polyethylene Wear Mechanisms and Debris in Hip Implants

Assessing the Cleanliness of Dental Implants Using Scanning Electron Microscopy and Energy-Dispersive X-ray Spectroscopy Analysis-A SEM and EDS In Vitro Study

A wide variety of titanium (Ti) alloy dental implant systems are available and as a result, choosing the correct system has become a challenge. Cleanliness of the dental implant surface affects osseointegration but surface cleanliness may be jeopardized during manufacturing. The purpose of this study was to assess the cleanliness of three implant systems. Fifteen implants per system were examined with scanning electron microscopy to identify and count foreign particles. Particle chemical composition analysis was performed with energy-dispersive X-ray spectroscopy. Particles were categorized according to size and location. Particles on the outer and inner threads were quantitatively compared. A second scan was performed after exposing the implants to room air for 10 min. Carbon, among other elements, was found on the surface of all implant groups. Zimmer Biomet dental implants had higher particle numbers than other brands. Cortex and Keystone dental implants showed similar distribution patterns. The outer surface had higher particle numbers. Cortex dental implants were the cleanest. The change in particle numbers after exposure was not significant (p > 0.05). Conclusion: Most of the implants studied were contaminated. Particle distribution patterns vary with the manufacturer. The wider and outer areas of the implant have a higher probability of contamination.

A new minimal-invasive approach for total hip replacement in sheep

BACKGROUND

Over the last 50 years arthroplasty became the gold-standard treatment for disabling conditions of the coxofemoral joint. Variations of anterior, lateral, and dorsal incision have been applied, but as each approach requires the incision and reflection of various muscles to gain adequate exposure of the joint results are still controversial.

OBJECTIVE

The purpose of this study was to develop a minimal-invasive, tissue-sparing approach in sheep with reduced risks in animal testing.

METHODS

12 mature sheep underwent hip surgery as part of a study to evaluate a hip resurfacing system. In line with the preliminary cadaveric tests a modified, minimal-invasive, musclepreserving surgical approach was sought after.

RESULTS

We developed a surgical approach to the coxofemoral joint in sheep using only blunt tissue dissection after skin incision without any limitations in joint exposure or increased blood loss/duration of surgery.

CONCLUSION

Even though limitations occur and femoral orientation in sheep differs from man, joint forces have similar relative directions to the bone with similar bony and vascular anatomy. Therefore, this minimal-invasive muscle preserving approach might be a safe and comparable alternative in still inevitable animal testing.

Polymer Thermal Treatment Production of Cerium Doped Willemite Nanoparticles: An Analysis of Structure, Energy Band Gap and Luminescence Properties

The contemporary market needs for enhanced solid-state lighting devices has led to an increased demand for the production of willemite based phosphors using low-cost techniques. In this study, Ce3+ doped willemite nanoparticles were fabricated using polymer thermal treatment method. The special effects of the calcination temperatures and the dopant concentration on the structural and optical properties of the material were thoroughly studied. The XRD analysis of the samples treated at 900 °C revealed the development and or materialization of the willemite phase. The increase in the dopant concentration causes an expansion of the lattice owing to the replacement of larger Ce3+ ions for smaller Zn2+ ions. Based on the FESEM and TEM micrographs, the nanoparticles size increases with the increase in the cerium ions. The mean particles sizes were estimated to be 23.61 nm at 1 mol% to 34.02 nm at 5 mol% of the cerium dopant. The optical band gap energy of the doped samples formed at 900 °C decreased precisely by 0.21 eV (i.e., 5.21 to 5.00 eV). The PL analysis of the doped samples exhibits a strong emission at 400 nm which is ascribed to the transition of an electron from localized Ce2f state to the valence band of O2p. The energy level of the Ce3+ ions affects the willemite crystal lattice, thus causing a decrease in the intensity of the green emission at 530 nm and the blue emission at 485 nm. The wide optical band gap energy of the willemite produced is expected to pave the way for exciting innovations in solid-state lighting applications.