Minimum 10-Year Outcome of One-Stage Total Hip Arthroplasty Without Subtrochanteric Osteotomy Using a Cementless Custom Stem for Crowe III and IV Hip Dislocation

Postoperative hip center position is associated with gait symmetry in range of axial rotation in dysplasia patients after THA

Background

This study aimed to explore whether pre- or postoperative hip structures or surgical changes significantly influence hip range of motion (ROM) symmetry in patients with hip dysplasia during gait after total hip arthroplasty (THA) and provide possible surgical suggestions.

Methods

Fourteen patients with unilateral hip dysplasia underwent computed tomography before and after surgery to create three-dimensional hip models. Pre- and postoperative acetabular and femoral orientations, hip rotation centers (HRC), and femoral lengths were measured. Bilateral hip ROM during level walking after THA was quantified using dual fluoroscopy. The ROM symmetry in flexion-extension, adduction-abduction, and axial rotation was calculated using the symmetry index (SI). The relationship between SI and the above anatomical parameters and demographic characteristics was tested using Pearson's correlation and linear regression.

Results

The average SI values for flexion-extension, adduction-abduction, and axial rotation during gait were -0.29, -0.30, and -0.10, respectively. Significant correlations were detected mainly in the postoperative HRC position. A distally placed HRC was associated with increased SI values for adduction-abduction (R = -0.47, p = 0.045), while a medially placed HRC was associated with decreased SI values for axial rotation (R = 0.63, p = 0.007). A regression analysis indicated that horizontal HRC positions significantly determined axial rotational symmetry (R² = 0.40, p = 0.015). Normal axial rotation SI values were achieved with HRC between 17 mm medially and 16 mm laterally.

Conclusions

Postoperative HRC position was significantly correlated with gait symmetry in the frontal and transverse planes in patients with unilateral hip dysplasia after THA. Surgical reconstruction of the HRC to between 17 mm medially and 16 mm laterally may contribute to gait symmetry.

Patient Specific Instruments and Patient Individual Implants—A Narrative Review

Joint arthroplasties are one of the most frequently performed standard operations worldwide. Patient individual instruments and patient individual implants represent an innovation that must prove its usefulness in further studies. However, promising results are emerging. Those implants seem to be a benefit especially in revision situations. Most experience is available in the field of knee and hip arthroplasty. Patient-specific instruments for the shoulder and upper ankle are much less common. Patient individual implants combine individual cutting blocks and implants, while patient individual instruments solely use individual cutting blocks in combination with off-the-shelf implants. This review summarizes the current data regarding the implantation of individual implants and the use of individual instruments.

Total Hip Arthroplasties for Hartofilakidis Type C1 and C2 High Hip Dislocations Demonstrate Similar Survivorship and Clinical Function at Minimum 10-year Follow-up With Cementless Implants

BACKGROUND

This study aimed to determine the differences in survivorship, clinical function, and complications among patients who have Hartofilakidis Type C1 or C2 developmental dysplasia of the hips and underwent total hip arthroplasty (THA) with cementless implants.

METHODS

This retrospective study identified 84 Hartofilakidis Type C hips that underwent THA between 2002 and 2011 with a minimum 10-year follow-up (mean, 13 years, range, 10 to 19 years). Survivorship, latest Harris Hip Scores and satisfaction levels, radiographic outcomes (eg, implant stability, rate and length of subtrochanteric shortening transverse osteotomy, leg-length discrepancy, cup position, and orientation), as well as complications (eg, dislocation, periprosthetic fracture, periprosthetic joint infection) were compared to analyze the differences between Hartofilakidis C1 and C2 hips.

RESULTS

Between C1 and C2 hips, no difference existed in the 15-year cumulative Kaplan-Meier survivorship, with the endpoint defined as any reoperation (93.1 versus 90.8%), aseptic loosening combined with periprosthetic joint infection (93.1 versus 96.2%), or aseptic loosening (94.8 versus 96.2%), latest Harris Hip Score (87.1 versus 86.1%), vertical (6.1 versus 6.0 mm) and horizontal (11.5 versus 10.3 mm) distance to the anatomic center of rotation, postoperative leg length discrepancy (11.2 versus 15.5 mm), dislocation (5.2 versus 11.5%), stem aseptic loosening (6.9 versus 7.7%), periprosthetic fracture (3.4 versus 7.7%), and intraoperative femoral fracture (32.8 versus 23.1%). However, Type C2 hips demonstrated more severe preoperative leg length discrepancy (66.9 versus 42.5 mm) and required a higher percentage of subtrochanteric shortening transverse osteotomies (84.6 versus 36.2%) that were longer (33.7 versus 26.47 mm) than the Type C1 hips.

CONCLUSION

With cementless cups positioned near the anatomic acetabular center and cementless stems combined with subtrochanteric shortening transverse osteotomies, THAs for the Hartofilakidis Type C1 and C2 hips demonstrated similar survivorship, clinical function, and complications.

The role for high volume local infiltration analgesia with liposomal bupivacaine in total hip arthroplasty: A scoping review

Introduction

Liposomal bupivacaine has been integrated into clinical practice within many surgical disciplines to reduce post-operative pain and opioid consumption. This novel agent has been utilized in this regard in many subdisciplines of orthopedic surgery. Total hip arthroplasty has significant opioid use post-operatively as compared to many other orthopedic disciplines.

Objectives

The purpose of the present investigation is to summarize the current use of liposomal bupivacaine after total hip arthroplasty and to shed light on the prospect of liposomal bupivacaine to reduce opioid use after total hip arthroplasty. A tertiary purpose is to identify future areas of adjunctive pain measures that can assist in the reduction of opioid use after total hip arthroplasty.

Methods

This IRB-exempt scoping review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses extension for Scoping Reviews (PRISMA-ScR) checklist strictly. The literature search was performed in Mendeley. Search fields were varied until redundant. All articles were screened by title and abstract and a preliminary decision to include an article was made. The full-text screening was performed on the selected articles. Any question regarding the inclusion of an article was discussed by three authors until an agreement was reached.

Results

A total of 21 articles were included for qualitative description of the opioid epidemic, opioid overuse in total hip arthroplasty, and risk factors for opioid overuse in total hip arthroplasty. A total of 9 articles were included regarding the use of liposomal bupivacaine in total hip arthroplasty. Several risk factors have been identified for opioid overuse after total hip arthroplasty. These include younger age, an opioid risk tool score of > 7, a higher body mass index, chronic obstructive pulmonary disease, immunodeficiency syndromes, preexisting pain syndromes, peripheral vascular disease, anxiety and mood disorders, and substance abuse disorders. Liposomal bupivacaine reduces postoperative opioid use, patient-reported outcomes, length of stay, and time to ambulation, yet is more expensive than traditional bupivacaine.

Conclusions

Liposomal bupivacaine represents a useful adjunct for multimodal pain strategies in total hip arthroplasty with sufficient evidence to suggest that it may be useful in decreasing postoperative opioid use. The high costs of LB represent a barrier to institutional acceptance of LB into standardized multimodal pain strategies. Further efforts should be aimed toward better understanding the current state of integration of LB into academic and private practice settings, industry movements to decrease the cost, and the role other adjunctive measures may have in reducing post-operative opioid use.

Higher femoral anteversion restoration accuracy after total hip arthroplasty with a proximally fixed anatomic stem than with a generic straight double-tapered stem

BACKGROUND

Femoral antetorsion in uncemented hip replacement hardly can be modified and the restoration of the anatomic anteversion might be difficult with standard stems. We compared femoral anteversion restoration of a generic straight stem with a proximally fixed anatomic stem that included a dual sagittal curvature and a proximal torsion. It was hypothesised that the restoration of the anteversion was more accurate with the anatomic stem.

PATIENTS AND METHODS

In this comparative study data were collected prospectively of 80 consecutive patients with total hip arthroplasty for primary osteoarthritis. In the first 40 patients (Group I) a cementless proximally fixed anatomic stem with 15° antetorsion of the shaft and a dual sagittal curvature was used. Its design was based on a database of 3D CT images of 600 hips. For comparison a cementless generic straight double-tapered stem was implanted in the next 40 patients (Group II). All operations were performed by one experienced surgeon. All patients had a preoperative 3D planning. A low-dose CT scan was performed at 3 months postoperatively to determine the postoperative stem anteversion.

RESULTS

The demographics were similar in both groups. In group I the mean postoperative femoral anteversion was similar to the preoperative one (22.1° ± 10.2° vs. 20.4° ± 9°; p = 0.2). In Group II, the mean postoperative femoral anteversion was lower (12.9° ± 10.8°, vs. 18.3° ± 12°; p = 0.02).

CONCLUSIONS

Uncemented standard femoral stems tend to reduce femoral anteversion. The used anatomic stem restored femoral anteversion better. The clinical impact of this finding has to be proven.

Postoperative Hip Center Position Associated With the Range of Internal Rotation and Extension During Gait in Hip Dysplasia Patients After Total Hip Arthroplasty

Background: Total hip arthroplasty (THA) for hip dysplasia patients is sometimes complex and compromises pathomorphological changes in these patients. However, it remains unclear whether it is preoperative deformities or postoperative structures or anatomic changes during THA that have the most remarkable correlation with the hip dynamic function during gait. The purpose of this study was to investigate this relationship and propose insights into the surgical reconstruction strategy in patients with developmental dysplasia of the hip.

Methods: A total of 21 unilateral hip dysplasia patients received computed tomography scans for the creation of 3D hip models before surgery and at the last follow-up. Acetabular and femoral orientations, hip center positions, and femoral length were measured before and after THA. Hip kinematics of the operated side during gait was quantified using a dual fluoroscopic imaging technique. Pearson correlation and multiple linear regression were performed to evaluate the relationship between hip maximum range of motion in six directions and demographics characters and above hip anatomic parameters before and after THA and their changes in surgery.

Results: Pearson correlation analysis found significant correlations with the gait range of motion mainly in postoperative structures, including postoperative hip center positions and acetabulum and combined anteversion. Further multiple linear regression indicated that a laterally placed hip center was significantly correlated with an increased internal rotation (R2 = 0.25, p = 0.021), which together with increased postoperative acetabulum anteversion explained 45% of external rotation decreasing (p = 0.004). A proximally placed hip center was correlated with more extension (R2 = 0.30, p = 0.010). No significant demographic characters or preoperative deformities or surgical changes were included into other multiple regression models.

Conclusion: Strong correlations between postoperative structures, especially hip center positions and gait range of motion in unilateral hip dysplasia patients after THA were found. It indicated that postoperative prosthesis structures, particularly hip center positions had significant impact on the hip gait motion range and should be treated with particular caution in surgery.

A novel revision system for complex pelvic defects utilizing 3D-printed custom prosthesis

Background

Thus far, the hip revision surgery has been widely used and promoted, and the technology has been constantly innovated, such as tissue engineering, 3D printing prosthesis, etc. However, traditional standardized prosthesis, allograft, autograft, bone cement and reinforcing ring are still the main treatment methods in the mainstream pelvic defects classification systems for hip revision. In addition, the mainstream classification systems are still mainly focus on the peri-acetabulum, but less on the large-scale complex pelvic defects that widely affecting the regions far away from the acetabulum, which also have a significant impact on the holistic biomechanical properties of pelvis.

Methods

After integrating the design experience of custom prostheses and the understanding of biomechanical properties of pelvis, an innovative pelvic defects classification for custom revision was preliminarily proposed, and was practiced in surgeries. Some typical cases were chosen for elucidation in this study, and two observers each evaluated their CT data independently twice. Intraobserver and interobserver agreement were calculated using the kappa statistic to evaluate the reliability. The pelvis defects were classified into five types and two subtypes. The corresponding reconstruction principles, as the main basis to support the classification, were also described in detail. Prosthesis position examination and Harris hip score were utilized to evaluate the clinical outcome.

Results

The installed prostheses resulted in high concordance with preoperative position planning, significantly improved Harris score, low postoperative complication rate and no re-revision case. In addition, The interobserver and intraobserver agreement were both excellent.

Conclusion

The presenting revision system for complex pelvic defects utilizing 3D-printed custom prosthesis and corresponding classification of pelvic defects can preliminarily guide patients’ grouping and prosthesis design, and may potentially provide an innovative, feasible, and efficient basis for complex total hip arthroplasty (THA) revision.

Translational potential statement

This study provides a novel method for prosthetic revision of peri-acetabular pelvic defects, and is expected to systematically improve the efficiency of prosthesis design and surgery in clinical practice.

Total joint replacement of the hip and knee in patients with arthrogryposis multiplex congenita: a report of six joints

INTRODUCTION

Arthrogryposis multiplex congenita (AMC) is a rare congenital condition that leads to severe joint contractures and deformities. As painful joint dysplasia and degeneration might develop over time, total joint replacement (TJR) can be a potential treatment option for these patients. The aim of this study is to investigate functional results, implant survivorship and potential complications in patients with AMC who undergo hip or knee arthroplasty.

MATERIALS AND METHODS

We retrospectively identified six TJR in three patients at a single centre performed between 2006 and 2019. The median patient age at surgery was 23 years and the median follow-up period was 69 (IQR 55-99) months. We analysed surgical technique, implant survivorship and complications as well as functional outcome determined by pain reported on the Numerical Rating Scale (NRS), patient-reported outcome scores [Oxford Hip Score (OHS), Harris Hip score (HHS), Oxford Knee Score (OKS)], range of motion and ambulatory status. Depending on data distribution means with ranges and median with interquartile range were compared with the Wilcoxon signed rank test or Student's t test. The level of significance was defined at < 0.05.

RESULTS

In hips, the mean range of motion in flexion/extension (52° vs. 85°, p = 0.014) and in rotation (28° vs. 68°, p = 0.02) as well as mean pain score on the NRS (8.5 vs. 0, p = 0.001), OHS (9 vs. 26, p = 0.031) and HHS (17 vs. 52, p = 0.007) significantly improved. In knees, mean range of motion (55° vs. 93°, p = 0.403), mean pain score on the NRS (0 vs. 7) and the OKS (2 vs. 21) also improved. While the ambulatory status did not change, the patients who were wheelchair dependent reported less problems with transfers to a bed or chair and the patient who ambulated reported an improved walking distance. One total knee arthroplasty (TKA) underwent revision for an acute, late infection 155 months following the initial surgery.

CONCLUSIONS

TJR is a safe procedure in patients with AMC that effectively improves function and reduces pain irrespective of preoperative ambulatory status.

Total Hip Replacement in Developmental Hip Dysplasia: A Narrative Review

The reconstruction of the hip joint in patients suffering from developmental hip dysplasia (DDH) is a demanding procedure and presents many challenges to the reconstructive surgeon. Higher rates of mechanical complications are present in this group of patients. The results of cemented and uncemented implants used in DDH patients are very promising, according to recent outcomes. However, the surgeon has to be aware of several complications, in order to establish an uneventful surgical management of DDH. The specific article investigates the technical challenges and clinical results of total hip arthroplasty in patients with DDH.

Patient-specific total hip arthroplasty is superior to conventional methods for Crowe III and IV adult developmental hip dysplasia: a randomized controlled trial

Background

Restoration of the acetabulum during total hip arthroplasty in adults with developmental dysplasia of the hip (DDH-THA) and resumption of hip function remain major challenges. Herein, a new patient-specific instrument (PSI) was developed that uses the superolateral rim of the acetabulum as a positioning marker to assist surgeons in adult DDH-THA.

Methods

From January 2017 to October 2018, 104 adult DDH patients were randomized to either the PSI group or conventional operation (CO) group, and further divided into eight subgroups by stratified random sampling using Crowe's classification. Complications, Harris hip scores (HHS), and X-ray results were recorded at 3 and 12 months after surgery.

Results

With the exception of anteversion in CO-Crowe II group patients, there was no difference in the accuracy of cup placement and orientation between the PSI and CO groups in Crowe I and II DDH patients. With the exception of percentage of acetabular cup coverage (PACC) and the qualification rate of Crowe IV PACC patients, among all Crowe III and IV DDH groups, all postoperative indexes of cup orientation and positioning exhibited significant differences between the PSI and CO groups; however, no significant differences were observed in Crowe I and II DDH patients.

Conclusions

Compared with conventional methods, the new PSI-assisted surgical method improved the accuracy of placement and orientation of the acetabulum and cup prosthesis, optimized the surgical process, reduced complications, and contributed to quicker recovery of hip function after surgery in adults with Crowe III and IV DDH-THA, but little difference was noted for those with Crowe I and II DDH.

Surgical Technique and Case Series of Total Hip Arthroplasty with the Hueter Anterior Approach for Crowe Type-IV Dysplasia

BACKGROUND

Total hip arthroplasty (THA) is being increasingly performed via the Hueter anterior approach (HAA), which has proven benefits with nondysplastic hips; however, little has been published on its outcomes with dysplastic hips, where it can provide better acetabular exposure. We describe our technique for THA via the HAA in hips with Crowe type-IV developmental dysplasia and report the mid-term outcomes of cases that were performed over 5 consecutive years.

METHODS

We retrospectively evaluated a continuous series of 8 hips (6 patients) with Crowe type-IV dysplasia; the patient ages ranged from 44 ± 20 years (range, 17 to 65 years) at the index THA. All of the patients received uncemented implants via the HAA on a traction table to restore the hip center of rotation to the true acetabulum. Femoral head autografts (FHAs) were used to increase acetabular coverage in 6 hips, and subtrochanteric shortening osteotomies (SSOs) were performed in 5 hips. Patients were assessed clinically and radiographically at a minimum follow-up of 2 years.

RESULTS

There were no revisions, deaths, dislocations, or infections. Two hips (25%) had intraoperative complications, and 1 hip (13%) had a postoperative complication that required reoperation without implant removal. All of the hips were assessed clinically and radiographically at 4 ± 1 years (range, 2 to 6 years). The modified Harris hip score (mHHS) improved from 33 ± 7 to 90 ± 7, and the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) improved from 53 ± 14 to 89 ± 6; the postoperative leg-length discrepancy was 3.2 mm (range, -10 to 20 mm). None of the hips had osteolysis or radiolucent lines of >2 mm.

CONCLUSIONS

THA via the HAA on a traction table for hips with Crowe type-IV dysplasia yielded satisfactory mid-term outcomes. Both FHA and SSO can be adequately performed via the HAA to help restore the hip center of rotation to the true acetabulum.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Total Hip Arthroplasty With Trochanteric Ostectomy for Patients With Angular Deformity of the Proximal Femur

BACKGROUND

Total hip arthroplasty (THA) of patients with a proximal femoral deformity is technically demanding. This deformity poses the risk of femoral fracture or perforation; stem malposition; and failed stem fixation. To insert a femoral stem in neutral position with a good fit, we removed the greater trochanter in case of a varus deformity, and the lesser trochanter in case of valgus deformity, while performing THA. We aimed to evaluate stem position, implant stability, clinical results, and radiological changes after THAs using this technique.

METHODS

Fifteen patients (17 hips; 11 varus hips and 6 valgus hips) underwent cementless THA using the trochanteric osteotomy technique in one institution. We evaluated procedure-specific complications: intraoperative femoral fracture, stem malposition, weakness of the abductor power and limp. Modified Harris Hip Score, radiological changes, and the stability of stems were assessed at a mean of 7.1 years of follow-up (range 2.0-15.5).

RESULTS

Femoral fracture occurred during the insertion of the stem in 4 hips. All stems were aligned in neutral position. At the latest follow-up, the mean power of the abductor was 4.3 (range 3-5). Eleven patients had slight limp and 4 patients had moderate limp. All stems had bone-ingrown stability and no stem was revised. The mean modified Harris Hip Score improved from 50 points at the preoperative evaluation to 81 points at the final follow-up.

CONCLUSION

The trochanteric excision enabled neutral insertion of cementless stem in patients with varus/valgus deformity of the proximal femur, and THA using this technique rendered favorable results.

Acetabular Bone Defect in Total Hip Arthroplasty for Crowe II or III Developmental Dysplasia of the Hip: A Finite Element Study

Background

The purpose of this study was to establish the finite element analysis (FEA) model of acetabular bone defect in Crowe type II or III developmental dysplasia of the hip (DDH), which could evaluate the stability of the acetabular cup with different types of bone defects, different diameters of femoral ceramic heads, and the use of screws and analyze the stress distribution of screws.

Methods

The FEA model was based on the CT scan of a female patient without any acetabular bone defect. The model of acetabular bone defect in total hip arthroplasty for Crowe II or III DDH was made by the increasing superolateral bone defect area of the acetabular cup. Point A was located in the most medial part of the acetabular bone defect. A 52 mm PINNACLE cup with POROCOAT Porous coating was implanted, and two screws (the lengths were 25 mm and 40 mm) were implanted to fix the acetabular cup. The stability of the acetabular cup and the von Mises stress of point A and screws were analyzed by a single-legged stance loading applied in 1948 N (normal working). The different diameters of the femoral ceramic head (28 mm, 32 mm, and 36 mm) were also analyzed.

Results

The von Mises stress of point A was gradually increased with the increasing uncoverage values. When the uncoverage values exceeded 24.5%, the von Mises stress of point A without screws increased significantly, leading to instability of the cup. Screws could effectively reduce the von Mises stress of point A with uncoverage values of more than 24.5%. However, the peak von Mises stress in the screws with the uncoverage values that exceeded 24.5% was considerably increased. The diameter of the femoral ceramic head had no significant effect on the von Mises stress and the stability of the acetabular cup.

Conclusions

We recommend that uncoverage values of less than 24.5% with or without screw is safe for patients with Crowe II or III DDH.

Mid-term results of short-stem total hip arthroplasty in patients with Crowe type I and II developmental dysplasia of the hip

BACKGROUND

This study aimed to evaluate the clinical and radiographic mid-term results of short-stem THA in patients with DDH.

METHODS

We reviewed 32 cases that underwent Metha stem between November 2010 and February 2015. WOMAC scores, Oxford Hip Scores (OHS) and Harris Hip Scores (HHS) were recorded to evaluate the clinical results. The appearance of bone trabeculae development and stress shielding was analyzed.

RESULTS

The mean age of patients was 50.3 years (33-67) with the mean follow-up of 77 months (60-106). According to Crowe classification, 13 cases were graded as Crowe I and 19 cases as Crowe II. According to Dorr classification, 17 cases were graded as Dorr A and 15 cases as Dorr B. The postoperative WOMAC scores decreased, and OHS and HHS increased significantly compared with preoperative (p < 0.001). The caput-column-diaphysis angles decreased significantly (p < 0.001) and limb length discrepancy decreased significantly (p = 0.013) after surgery. The radiographic change around the stem showed bone trabeculae development at zones 1 (93.9%), 2 (93.9%), 3 (25%), 5 (6.3%), 6 (96.9%) and 7 (90.6%). There was grade 1 stress shielding in 30 cases (93.9%). There was no stem subsidence greater than 2 mm in all hips, no sciatic nerve injury or no dislocation. Neither acetabulum nor femoral stem was defined as definite loosening, and none of the implants was revised.

CONCLUSIONS

The short stem showed promising mid-term clinical results in patients with DDH. The radiographic results demonstrated that the short stem provided physiological proximal load transfer with less stress shielding, being a useful alternative for femoral reconstruction.

Comparison of Trochanteric Slide and Subtrochanteric Shortening Osteotomy in the Treatment of Severe Hip Dysplasia: Mid-Term Clinical Outcomes of Cementless Total Hip Arthroplasty

BACKGROUND

The aim of this study is to compare clinical results of Crowe type III-IV developmental dysplasia of the hip (DDH) patients who underwent total hip arthroplasty with either trochanteric slide osteotomy (TSO) or subtrochanteric shortening osteotomy (SSO).

METHODS

The patients who underwent cementless total hip arthroplasty with femoral shortening osteotomy due to Crowe type III/IV DDH between 2004 and 2014 and completed at least 5 years of follow-up were retrospectively analyzed. The patients were grouped according to the type of shortening osteotomy as either TSO or SSO. Preoperative and postoperative clinical evaluation included Harris Hip Score, Visual Analogue Scale pain, leg length discrepancy, and the presence of Trendelenburg sign. The clinical outcome measures and complication rates were compared in terms of osteotomy type.

RESULTS

The TSO group consisted of 34 patients (43 hips) and the SSO group consisted of 40 patients (51 hips). The SSO group (96.1%) had a slightly higher 5-year survival of the implant compared to TSO (93%) without statistical significance (P = .18). No significant difference was detected between the groups in terms of clinical outcomes. Complication rates did not significantly differ between the groups except for the lack of bony union which was significantly higher in TSO (P = .006) but this difference did not transform into clinical significance since 5 of 6 patients who did not have a bony union in the TSO group were symptom-free with a fibrous union.

CONCLUSION

TSO and SSO provide similar clinical outcomes at mid-term follow-up in the management of Crowe III-IV DDH by cementless total hip arthroplasty. Both techniques can be used safely depending on the surgeon's preference.

LEVEL OF EVIDENCE

Level III, Therapeutic, Case-control study.

Surgery simulation teaching based on real reconstruction aid versus traditional surgical live teaching in the acquisition of an adult total hip arthroplasty surgical technique for developmental dysplasia of the hip: a randomized comparative study

BACKGROUND

A simulation and model (SM) teaching aid using 3D printing was developed to improve a training course for total hip arthroplasty of adult developmental dysplasia of the hip (adult DDH-THA). We named this new method Surgery Simulation Teaching based on a Real Reconstruction Aid (RRA-SST). A prospective randomized comparison was performed with the traditional surgical live teaching method to evaluate the training effectiveness of RRA-SST for adult DDH-THA.

METHODS

Twenty-six trainees, who were already practicing but were not experienced, participated in the study. We randomly divided the trainees into two groups: Group A (n = 13) received RRA-SST and group B (n = 13) received traditional surgical live teaching. A surgery simulation test and a questionnaire were used for evaluation. Next, each group received training with the other teaching method, and then the test and questionnaire were used again for evaluation.

RESULTS

After the first test, the RRA-SST method was shown to produce better results than the traditional surgical live teaching method. After the second test, the results showed the training effect in both groups reached the same level, which was level as Group A RRA-SST results. Analysis of the questionnaire results showed that the training effect of RRA-SST was higher than that of traditional surgical live teaching, from multiple perspectives.

CONCLUSIONS

The use of RRA-SST improved participant performance according to simulation assessment. RRA-SST can be helpful for trainees who are already practicing but not experienced when developing proficiency in adult DDH-THA surgical techniques.

The Effect of the False Acetabulum on Femoral Proximal Medullary Canal in Unilateral Crowe Type IV Developmental Dislocation of the Hip

Purpose

To investigate the effect of the false acetabulum on femoral proximal medullary canal in unilateral Crowe type IV developmental dislocation of the hip (DDH) patients on anteroposterior radiographs.

Patients and Methods

We measured the following parameters of DDH and contralateral normal hip (CNH) of proximal morphology of femurs on 65 patients with unilateral Crowe type IV DDH (30 hips with no false acetabulum (type IVA) and 35 hips with a false acetabulum (type IVB)) in our hospital between September 2009 and July 2019 on anteroposterior radiographs: the widths of medullary canals at 20 mm above the center of lesser trochanter (CLT), 20 mm below the CLT and the isthmus. Canal flare index (CFI), metaphyseal canal flare index (MCFI), diaphyseal canal flare index (DCFI) were calculated.

Results

The values of CFI of DDH and CNH in unilateral type IVA patients were 2.8 and 4.4, respectively (p < 0.001), and those in type IVB patients were 3.9 and 4.6, respectively (p < 0.001). The MCFIs of DDH and CNH in type IVA group were 2.2 and 2.3, respectively (p = 0.032), and those in type IVB group were 2.4 and 2.4, respectively (p = 0.242). The DCFIs of DDH and CNH in type IVA group were 1.3 and 1.9, respectively (p < 0.001), and those in type IVB group were 1.7 and 1.9, respectively (p = 0.002).

Conclusion

The false acetabulum stimulated the development of the proximal femur in Crowe type IV DDH. The variation of the femoral proximal medullary canal in type IVA DDH mainly occurred at the metaphyseal and proximal diaphyseal levels, and that in type IVB DDH mainly occurred at the proximal diaphyseal level.

The Direct Anterior Approach for Total Hip Arthroplasty for Severe Dysplasia (Crowe III and IV) Provides Satisfactory Medium to Long-Term Outcomes

BACKGROUND

The direct anterior approach (DAA) is increasingly used for total hip arthroplasty (THA). Although the DAA can reduce pain, recovery time, and dislocations in nondysplastic hips, few studies report its results in patients with severe dysplasia. We aimed to evaluate outcomes of primary THA through the DAA with cup placement at the true acetabulum in hips with severe dysplasia.

METHODS

We retrospectively evaluated 23 consecutive patients (29 hips) who underwent THA by DAA for osteoarthritis secondary to Crowe III-IV dysplasia. Surgical procedures were performed on a traction table, and the acetabular cup was placed in the true acetabulum. Patients were assessed clinically (complications, modified Harris Hip Score, Western Ontario and McMaster Universities Osteoarthritis Index, Oxford Hip Score) and radiographically (radiolucencies, subsidence, leg length discrepancies, cup inclination, and cup coverage) at a minimum of 2 years.

RESULTS

One patient (2 hips) died with original implants (at 13 and 14 years), 3 patients (3 hips) were revised due to wear-induced loosening (at 14, 16, and 18 years), and there were no dislocations or infections. The remaining 19 patients (24 hips) were assessed at 8.4 ± 4.7 years (range 2-20); 2 patients (2 hips) had complications that required reoperation without implant removal. The modified Harris Hip Score improved from 32 ± 9 to 94 ± 7, Western Ontario and McMaster Universities Osteoarthritis Index from 46 ± 18 to 90 ± 7, and Oxford Hip Score was 56 ± 4. Patients were very satisfied (90%) or satisfied (10%). Limb length discrepancy was 2.5 ± 9.0 mm.

CONCLUSION

THA through the DAA with cup placement at the true acetabulum provides satisfactory mid to long-term clinical and radiographic outcomes compared to other approaches for hips with severe dysplasia.

LEVEL OF EVIDENCE

Level IV, retrospective cohort study.

Effects of Total Hip Arthroplasty on Axial Alignment of the Lower Limb in Patients with Unilateral Developmental Hip Dysplasia (Crowe type IV)

BACKGROUND

The aim of this study was to evaluate the influence of total hip arthroplasty on axial alignment of the lower limb in adults with unilateral developmental hip dysplasia (Crowe type IV).

METHODS

We retrospectively reviewed medical records of 50 adults who underwent total hip arthroplasty, in which the acetabular cup was placed in the anatomical position. The following parameters were measured before surgery, immediately after surgery, and two years later: mechanical axis deviation (MAD), tibiofemoral angle (TFA), femoral offset, hip-knee-ankle angle (HKA), mechanical lateral distal femoral angle (LDFA), mechanical medial proximal tibial angle, height of medial femoral condyle, height of lateral femoral condyle, and leg lengthening. Length of the resected femoral segment was also recorded from medical records.

RESULTS

Preoperative MAD, TFA, HKA, and LDFA of the ipsilateral lower limb showed significant valgus deformity. MAD of the ipsilateral lower limb and valgus inclination were significantly smaller immediately after surgery than before, while TFA, HKA, femoral offset, and LDFA were significantly larger (P < 0.05). These parameters did not differ significantly between immediately after surgery and two years later (P > 0.05). Ipsilateral extremities were extended by a mean of 2.54 cm (range, 0 to 5.35 cm). The mean length of the femoral resected segment was 3.56 cm (range, 2.03 to 5.74 cm). The contralateral lower limb showed marginally smaller MAD and medial proximal tibial angle after surgery than before, but larger LDFA, TAF, and HKA.

CONCLUSIONS

In patients with developmental hip dysplasia who underwent total hip arthroplasty with placement of the acetabular component at the level of the anatomic hip center, axial alignment of the ipsilateral lower limb was immediately altered, and valgus inclination was significantly reduced. The procedure only slightly altered the axial alignment of the contralateral lower limb.

[Total hip arthroplasty in young patients : Bearings and custom-made prostheses]

BACKGROUND

Carefully and correctly implanted components are the prerequisite for the lifespan of a prosthesis. Whether higher levels of activity lead to prior failure of total hip arthroplasty in young patients is controversially discussed. The right choice of bearings is still of great relevance.

BEARINGS

Ceramic-on-ceramic as well as polyethylene-on-ceramic bearings achieve comparable results, although ceramic-on-ceramic bearings should be avoided in patients with high demands on their range of motion. Polyethylene-on-metal bearings also show good clinical results, if corrosion between head and stem is absent. Metal-on-metal bearings lead to adverse systemic effects due to metal wear and should be implanted in individual cases only, e. g. as hip resurfacing. Alternative bearings have to give proof of effectivity first. Custom-made prostheses constitute an option for young patients with special conditions of hip anatomy. Planning and study results of these prostheses are elucidated in this review article.

[Total hip arthroplasty with Wagner Cone stem and subtrochanteric shortening osteotomy in treatment of Crowe developmental dysplasia of hip in adults]

Objective

To investigate the short-term effectiveness of total hip arthroplasty with Wagner Cone stem combined with subtrochanteric shortening osteotomy for adult patients with Crowe Ⅳ developmental dysplasia of the hip (DDH).

Methods

A clinical data of 18 patients (20 hips) with Crowe Ⅳ DDH between January 2015 and June 2017 was retrospectively analyzed. There were 5 males (6 hips) and 13 females (14 hips), with an average age of 42 years (range, 20-67 years). There were 18 cases with unilateral DDH and 2 cases with bilateral DDHs. The "4" sign and Trendelenburg sign of affected hip were positive. Preoperative Harris score and visual analogue scale (VAS) score were 41.95±6.90 and 5.05±1.15, respectively. The length discrepancy was (4.76±2.59) cm in patients with unilateral DDH. And the lengths of bilateral lower limbs in patients with bilateral DDH were equal. The acetabular anteversion angle, femoral anteversion angle, and combined anteversion angle were (32.82±2.79), (46.18±6.80), and (79.01±7.54) °, respectively. All patients were treated by total hip arthroplasty with Wagner Cone stem and subtrochanteric shortening osteotomy. The length of osteotomy ranged from 2.0 to 3.5 cm (mean, 2.38 cm).

Results

The operation time was 116-161 minutes (mean, 138.4 minutes); the volume of intraoperative blood loss was 600-1 200 mL (mean, 795 mL); the volume of drainage after operation was 100-630 mL (mean, 252 mL). All incisions healed by first intention. The symptom of sciatic nerve injury occurred in 1 case and relieved after symptomatic treatment. All patients were followed up 12-29 months (mean, 18.4 months). The "4" sign and Trendelenburg sign of affected hip were negative. The Harris score and VAS score at last follow-up were 87.50±5.06 and 0.75±0.85, respectively. The acetabular anteversion angle, femoral anteversion angle, and combined anteversion angle were (16.21±4.84), (18.99±2.55), and (35.20±5.80)°, respectively. There were significant differences in above indexes between pre- and post-operation ( P<0.05). The length discrepancy was (0.72±0.70) cm in patients with unilateral DDH, which was significant shorter than the preoperative value ( t=7.751, P=0.000). And the lengths of bilateral lower limbs in patients with bilateral DDH were equal. X-ray films showed that the osteotomy of femur healed at 3-6 months (mean, 4.1 months) without the signs of loosening, sinking, osteolysis, and dislocation.

Conclusion

Total hip arthroplasty with Wagner Cone stem and subtrochanteric shortening osteotomy can obviously improve the hip joint function and restore the length of lower limb. The short-term effectiveness is satisfactory, but the long-term effectiveness and survival rate of prosthesis need to be further observed.

Accuracy and practicability of a patient-specific guide using acetabular superolateral rim during THA in Crowe II/III DDH patients: a retrospective study

Background

It is challenging to create an ideal artificial acetabulum during total hip arthroplasty (THA) in adult DDH. Our team developed a new patient-specific instrument (PSI) that uses the superolateral rim of the acetabulum as a positioning mark to assist in the production of an artificial acetabulum in adult Crowe II/III DDH patients. The purpose of this retrospective study is to verify whether this new PSI can be used to implement the preoperative plan accurately and quickly to create an ideal artificial acetabulum during THA in adult Crowe II/III DDH patients.

Methods

We selected suitable adult Crowe II/III DDH patients from the registration system for artificial joint surgery at our hospital during April 2016 to March 2018 who underwent THA assisted by a PSI using the superolateral rim of the acetabulum as a positioning mark. We retrospectively analyzed data, including preoperative and postoperative anteversion, inclination, postoperative bilateral rotator center discrepancy (BRCD), surgery time, and the incidence of neurovascular injury. All patients underwent follow-up, and their Harris hip score (HHS) and X-ray data were recorded. Then, we performed statistical analyses on the data described above.

Results

A total of 20 hip surgeries from 17 patients were included in our study. All patients underwent a successful operation assisted by the PSI. The mean anteversion of the cup in our preoperative plan was 15.1° (range, 10.0° to 20.0°), while the mean postoperative anteversion of the cup was 15.3° (range, 7.0° to 28.6°). The mean inclination of the cup in our preoperative plan was 44.7° (range, 40.0° to 50.0°), while the mean postoperative inclination of the cup was 45.6° (range, 35.0° to 57.6°). Paired-samples t test revealed no significant differences in anteversion and inclination between pre- and postoperation times (P > 0.05). The mean BRCD was 3.38 ± 3.0 mm (range, 0.5 to 11.0 mm). The average operation time was 105.1 ± 15.4 min, and no patients had neurovascular injury complications. All patients’ acetabular components appeared clinically and radiologically stable after surgery. The mean HHS values were significantly improved at 12 weeks (P < 0.05) and 24 weeks (P < 0.05) postoperatively compared to the preoperative mean scores.

Conclusions

The new PSI is accurate and practical to create an ideal artificial acetabulum during THA in adult Crowe II/III DDH patients.

Electronic supplementary material

The online version of this article (10.1186/s13018-018-1029-1) contains supplementary material, which is available to authorized users.