Correlation Between Intraoperative Anterior Stability and Flexion Gap in Total Knee Arthroplasty

Medial soft tissue release is also related to the anterior stability of cruciate-retaining total knee arthroplasty: a cadaveric study

BACKGROUND

Medial soft tissue release is occasionally performed to achieve mediolateral ligament balance in total knee arthroplasty (TKA), whose sequential effect on mediolateral and anteroposterior stability remains unclear. This study aimed to quantitatively evaluate the difference in mediolateral and anteroposterior stability according to a sequential medial soft tissue release in TKA.

METHODS

Cruciate-retaining TKA was performed in six cadaveric knees. Medial and lateral joint gaps, varus-valgus angle, and tibial anterior and posterior translations relative to the femur with pulling and pushing forces, respectively, were measured. All measurements were performed at full extension and 45° and 90° flexion after release of the deep medial collateral ligament (MCL) (stage 1), the posteromedial capsule (stage 2), and the superficial MCL (stage 3). Mediolateral and anteroposterior stability were compared between stages, and correlations between mediolateral and anteroposterior stability were analyzed.

RESULTS

Medial joint gap significantly increased from stages 1 to 3 by 3.2 mm, 6.8 mm, and 7.2 mm at extension, 45° flexion, and 90° flexion, respectively, and from stages 2 to 3 by 3.5 mm at extension. Varus-valgus angle was varus at stage 2, which turned to valgus at stage 3 (-2.7° to 0.8°, -2.2° to 4.3°, and -5.5° to 2.5° at extension, 45° flexion, and 90° flexion, respectively). Anterior translation at 90° flexion significantly increased from stages 1 and 2 to stage 3 by 11.5 mm and 8.2 mm, respectively, which was significantly correlated with medial gap (r = 0.681) and varus-valgus angle (r = 0.495).

CONCLUSIONS

Medial soft tissue release also increased tibial anterior translation as well as medial joint gap, and medial joint gap and tibial anterior translation were significantly correlated. Surgeons should be careful not to create too large medial joint gap and tibial anterior translation in flexion by excessive medial release up to the superficial MCL for achieving an equal mediolateral joint gap in extension.

Anterior Position of the Femoral Condyle During Mid-Flexion Worsens Knee Activity After Cruciate-Retaining Total Knee Arthroplasty

BACKGROUND

The effects of kinematics on patient-reported outcome measures (PROMs) after cruciate-retaining (CR) total knee arthroplasty (TKA) remain unclear. This study investigated the effects of kinematic patterns after CR-TKA on PROMs.

METHODS

We examined 35 knees (27 patients) undergoing primary CR-TKA. Knee kinematics and 2011 Knee Society Score were evaluated at a mean follow-up of 72.4 (± 28.2) months. Knee kinematics was analyzed using fluoroscopy, and the femoral antero-posterior position relative to the tibial component was assessed separately for medial and lateral compartments during a squat. The correlations between kinematics and PROMs were evaluated.

RESULTS

The average amount of posterior femoral translation from full extension to maximum flexion was 0.2 (± 2.6) mm for the medial femoral condyle and 4.1 (± 2.9) mm for the lateral condyle. Medial pivot motion was observed in 24 knees (68.6%) with a low rate (14.3%) of paradoxical anterior translation. The anterior position of the medial femoral condyle at 60° had a negative impact on discretionary activities (ρ = -0.37; P = .039), and at maximum flexion, had a negative impact on total functional activities (ρ = -0.46; P = .005), advanced activities (ρ = -0.45; P = .006), and discretionary activities (ρ = -0.63; P < .001). Anterior position of the lateral femoral condyle at 30° had a negative impact on total functional activities (ρ = -0.48; P = .005), walking and standing (ρ = -0.56; P < .001), and advanced activities (ρ = -0.49; P = .004), and at 60° had a negative impact on walking and standing (ρ = -0.45; P = .010).

CONCLUSIONS

The anterior positions of the medial and lateral femoral condyles at mid-flexion and maximum flexion had negative impacts on PROMs. Soft tissue conditions should be carefully managed to achieve medial knee joint stability, which can improve PROMs.

Knee Stability following Posterior-Stabilized Total Knee Arthroplasty: Comparison of Medial Preserving Gap Technique and Measured Resection Technique

Novel medial preserving gap technique (MPGT) focuses on medial compartment stability and allows lateral physiological laxity. This study aimed to compare the MPGT with the measured resection technique (MRT) to determine which provides better postoperative knee stability after posterior-stabilized total knee arthroplasty (PS-TKA). Primary PS-TKA, using either MPGT (n = 65) or MRT (n = 65), was performed in 130 patients with varus knee osteoarthritis. Postoperative knee stabilities at extension and flexion were assessed using varus-valgus stress radiographs and stress epicondylar view, respectively (at 1 month, 6 months, 1 year, and 3 years postoperatively). The distance between the femoral prosthesis and polyethylene insert was measured on each medial and lateral side, defined as the medial joint opening (MJO) and lateral joint opening (LJO), respectively. Decreasing MJO or LJO translated to increasing postoperative stability. The femoral external rotation angle was compared between the two surgical techniques; postoperative knee stability was also compared between the medial and lateral compartments, as well as the surgical techniques. A significant difference was found in the femoral external rotation angle between MPGT (4.2 ± 0.2 degrees) and MRT (3.6 ± 0.1 degrees, p < 0.01). Postoperative MJOs both at extension and flexion were significantly smaller than LJOs using MPGT and MRT at all time points (p < 0.05). MJOs and LJOs at extension using MPGT were significantly smaller than those when using MRT, at 1 and 3 years postoperatively (p < 0.05). Furthermore, MJOs at flexion using MPGT were significantly smaller than those when using MRT at 6 months, 1 year, and 3 years postoperatively (p < 0.05). MPGT provided higher postoperative medial knee stability than MRT both at extension and flexion, even at 3 years after PS-TKA. This suggests that this newly developed surgical technique is a more feasible option than MRT for the preservation of postoperative medial knee stability.

Association of a Wider Medial Gap (Medial Laxity) in Flexion with Self-Reported Knee Instability After Medial-Pivot Total Knee Arthroplasty

BACKGROUND

Medial-pivot total knee arthroplasty (TKA) is designed with high articular conformity in the medial compartment in order to achieve stability. The subjective outcome of patients has been reported to be good postoperatively; however, the association between the objective and subjective knee stability and the influence of subjective stability on the overall outcomes of TKA remained unknown. Our hypothesis was that postoperative flexion joint-gap imbalance could affect subjective knee instability following TKA in medial-pivot prostheses. The purpose of this study was to analyze the association between the joint gap in flexion and subjective knee instability and between subjective knee instability and outcomes following medial-pivot TKA.

METHODS

A total of 769 patients who underwent primary TKA with use of medial-pivot prostheses were enrolled. Clinical outcomes included knee range of motion, Knee Society Score-2011 (KSS-2011), Forgotten Joint Score-12 (FJS-12), patient-reported subjective knee instability, and axial knee radiography to assess flexion joint-gap balance measured at the final follow-up. Clinical outcomes were compared between patients with and without subjective knee instability. Moreover, associated factors were analyzed for postoperative subjective knee instability.

RESULTS

Overall, 177 patients (23%) reported experiencing postoperative subjective knee instability. Knee flexion (p = 0.04); KSS-2011 symptom (p<0.001), satisfaction (p<0.001), expectation (p=0.008), and activity (p<0.001) subscales; and FJS-12 (p < 0.001) were significantly worse in patients with subjective knee instability. The KSS-2011 subjective score differences were greater than the minimal clinically important difference. Older age at the time of surgery (odds ratio, 1.04; p = 0.04) and a wider postoperative joint gap in flexion on the medial side (odds ratio, 1.21; p = 0.001) were significant risk factors for subjective knee instability. A gap angle of -2.9° (i.e., medial laxity) was the threshold to predict postoperative knee instability (sensitivity, 0.29; specificity, 0.91).

CONCLUSIONS

Postoperative flexion joint-gap laxity on the medial side following medial-pivot TKA affected the patient-reported subjective knee instability scores. Postoperative KSS-2011 subjective scores following medial-pivot TKA were poorer in patients with subjective knee instability.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Implant survival of 3rd-condyle and post-cam posterior-stabilised total knee arthroplasty are comparable at follow-up > 10 years: a systematic review

PURPOSE

To summarise the literature on 3rd-condyle total knee arthroplasty (TKA) designs and compare their survival rates to those of post-cam TKA designs. The null hypothesis was that 3rd-condyle TKAs would have equivalent survival rates compared to contemporary post-cam TKAs.

METHODS

An electronic literature search for Level I-V studies was independently conducted by two researchers using Medline^® and Web of Science for studies published between January 1984 and October 2020 that specifically reported on rates of implant survival and complications, joint kinematics, clinical outcomes, and radiographic outcomes of 3rd-condyle TKA. The methodological quality of clinical studies was assessed according to the Downs and Black Quality Checklist for Health Care Intervention Studies, and for in vitro and in silico studies according to the Joanna Briggs Institute (JBI) tool for assessing analytical cross-sectional studies. Findings extracted for each TKA design were presented as reported and synthesised narratively. Survival rates at 5, 10 and > 10 years of 3rd-condyle TKA designs were graphically compared to rates of post-cam TKA designs published in joint registries.

RESULTS

A total of 38 studies were identified that reported on kinematics, clinical outcomes, radiographic alignment, and rates of complications and survival. Mean survival rates ranged from 96 to 98% at 5 years, 78-100% at 5-10 years, and 86-99% at > 10 years for 3rd-condyle PS TKAs. Mean survival rates ranged from 93 to 98% at 5 years, 89-99% at 5-10 years, and 88-95% at > 10 years for post-cam PS TKAs.

CONCLUSION

Implant survival rates of 3rd-condyle TKAs are comparable to those of post-cam TKAs at follow-up > 10 years. When compared to post-cam PS TKA, 3rd-condyle designs offer an alternative for younger and more active patients when considering the added benefits of a lowered point-of-contact and larger congruent contact area at the intercondylar tibial sulcus, that reduce risks of loosening and component wear.

LEVEL OF EVIDENCE

V.

A tensor with a flat surface overestimates midflexion laxity in total knee arthroplasty: Comparison between a tensor with a flat-shaped surface and a tensor with an insert-shaped surface

BACKGROUND

Soft tissue balance is important for the success of total knee arthroplasty (TKA). Various types of tensors have been developed for the precise measurement of a gap. We hypothesized that the surface shape of the tensor that contacted the TKA component affected the gap measurement. This study aimed to compare the gaps obtained with flat and insert-shaped surface tensors.

METHODS

Two senior surgeons performed 95 TKAs (Vanguard-PS:55 knees; Persona-PS:40 knees). The joint gap was measured in each static knee flexion status (0°, 30°, 45°, 60°, 90°, 120°, and full flexion). We compared the gaps measured with a flat surface tensor and an insert-shape surface tensor. We defined a significant change as a gap difference of >1 mm with a statistical significance.

RESULTS

In Vanguard-PS, significant changes were observed at 30° and 45°. In Persona-PS, significant changes were observed at 30°, 45°, and 60°. In both implants, gaps measured with the flat tensor were larger than those measured with the insert tensor at approximately midflexion, and the significant changes disappeared in higher flexion position over midflexion.

CONCLUSIONS

The surface shape of the tensor affected the measurement of midflexion laxity in TKA. When measuring the gap with a flat tensor, the midflexion laxity was overestimated. A tensor with an insert-shaped surface should be used to measure the gap in TKA.

Navigation-based analysis of associations between intraoperative joint gap and mediolateral laxity in total knee arthroplasty

BACKGROUND

No data have demonstrated how joint gap measured under a distraction force is actually associated with mediolateral laxity evaluated under a varus-valgus force during total knee arthroplasty (TKA). This study aimed to investigate the correlations between them using a navigation system.

METHODS

A total of 113 primary navigated TKAs were included. After bone resection and soft-tissue balancing, the component gap was measured with a distraction force of 60 N and 80 N for both the medial and lateral compartment (i.e. a total of 120 N and 160 N) at 0°, 10°, 30°, 60°, 90°, and 120° knee flexion. After the final prosthetic implantation and capsule closure, mediolateral laxity under a maximum varus-valgus stress was recorded with image-free navigation at each knee flexion angle. The correlation between joint gap laxity (total differences between component gap and insert thickness in the medial and lateral compartment) and mediolateral laxity was analyzed using Spearman's rank correlation coefficient.

RESULTS

The joint gap laxity under both distraction forces showed significant positive correlations with mediolateral laxity at 10°, 30°, 60°, and 90° flexion, whereas no correlation was observed at extension and 120° flexion. The correlations were stronger in gap measurement under 80 N than 60 N at all examined ranges. In patients with body mass indexes (BMIs) ≥ 30 kg/m², the correlation became non-significant.

CONCLUSION

Intraoperative joint gap laxity was associated with mediolateral laxity after TKA, especially at mid-flexion angles. The factors weakening the correlations were a lower applied distraction force for gap measurement and a larger BMI.

The medial gap is a reliable indicator for intraoperative soft tissue balancing in posterior-stabilized total knee arthroplasty

BACKGROUND

Appropriate soft tissue balance and accurate alignment are important for successful total knee arthroplasty (TKA). However, the optimal technique for establishing and measuring soft tissue balancing remains unclear. The aim of this study was to analyze the intraoperative medial and lateral gap pattern using digital knee balancer in posterior-stabilized (PS) TKA.

METHODS

This study involved 55 patients with medial osteoarthritis who underwent a primary TKA using an image-free navigation system. The extension gap and the flexion gap at 90° knee flexion were assessed using an offset seesaw-type digital balancer. Continuous joint distraction force from 10 lb to 60 lb was applied. Medial gap, lateral gap, and varus angle were measured.

RESULTS

The medial bone gap difference between extension and flexion was constant regardless of the distraction force from 20 lb to 60 lb. The lateral bone gap was significantly greater than the medial bone gap in extension and flexion from 30 lb to 60 lb (P < 0.05). The varus angle changed depending on the distraction force, especially in flexion. The varus angle in flexion was significantly greater than that in extension from 40 lb to 60 lb (P < 0.05).

CONCLUSIONS

The medial bone gap is a reliable indicator unaffected by the distraction force during surgery and is useful for adjusting the medial gap in extension and flexion appropriately to ensure medial stability in PS-TKA. The digital knee balancer and navigation system support both precise gap assessment and surgery.

The relationship between anteroposterior stability and medial-lateral stability of the bi-cruciate stabilized total knee arthroplasty

BACKGROUND

Acquisition of appropriate anteroposterior (AP) stability depends on the prosthetic design and intraoperative soft tissue handling. A bi-cruciate stabilized (BCS) total knee arthroplasty (TKA) has a two cam-post mechanism, which substitutes for the anterior cruciate ligament and posterior cruciate ligament (PCL). Therefore, appropriate AP stability is expected. Because the PCL is sacrificed during BCS TKA, medial stability and lateral stability are thought to be important factors to determine AP stability. However, no previous study has reported AP stability after BCS TKA and the relationship between AP and medial-lateral stability.

METHODS

AP stability was measured using a navigation system intraoperatively and the KT 2000 device postoperatively. Intraoperative joint laxity of the medial and lateral compartments was evaluated separately using a compartment-specific ligament tensioner. The relationship between AP stability and medial-lateral laxity was assessed.

RESULTS

Intraoperative AP translation at 30° and 90° knee flexion angles was 7.7 ± 3.1 mm and 5.9 ± 2.0 mm, respectively. Postoperative AP translation at 30° was 5.9 ± 1.7 mm. AP translation correlated positively with medial joint laxity at 30° (R = 0.29) and 90° (R = 0.40). The intraoperative and postoperative AP translations at 30° flexion had a positive relationship (R = 0.61).

CONCLUSION

AP stability of the BCS TKA had a positive relationship with intraoperative medial stability. Therefore, surgical soft tissue handling focusing on medial stability is also appropriate for AP stability of BCS TKA. Additionally, intraoperative AP translation turned out to be a predictive indicator for postoperative knee AP stability at 30° flexion.