Trabecular Metal Cones Combined With Short Cemented Stem Allow Favorable Outcomes in Aseptic Revision Total Knee Arthroplasty

Revision total knee arthroplasty with periprosthetic distal femoral fracture

Treatment strategies for periprosthetic distal femoral fracture depend on the type of fracture, level with respect to the prosthesis, and prosthesis fixation. The usual treatment is internal fixation by nail or locking plate. This can be more difficult when the fracture is close to the joint, is destabilizing the prosthesis or is associated with reduced bone stock, and implant exchange should be considered, depending on the patient's health status. The aim is to obtain the fastest possible recovery while limiting complications and minimizing surgery time for often frail and elderly patients. The present study details the implant revision technique in periprosthetic distal femoral fracture, which requires experience in traumatology and prosthetic revision and material adapted to the situation. LEVEL OF EVIDENCE: V, expert opinion.

Short-term Comparison of Survivorship and Functional Outcomes for Metaphyseal Cones with Short and Long Stems in Revision Total Knee Arthroplasty

Printed porous titanium metaphyseal cones have become a mainstay for managing bone loss in revision total knee arthroplasty (rTKA). A short or long stem is routinely used when implanting a cone to augment fixation and offload stresses. This retrospective analysis compared the short-term survivorships and functional outcomes for use of a short or long stem with a metaphyseal cone.A total of 179 cases using metaphyseal cones and stems with median follow-up of 1.95 years (interquartile range, 1.00-2.14) were compared based on stem type. There were 55 cases with long stem(s) and 124 cases with short stem(s). Cases with both long and short stems were excluded. Demographics, Kaplan-Meier survivorships, and preoperative and 1-year postoperative patient-reported outcome measures (PROMs; 2011 Knee Society Score [KSS] objective knee score, function, and satisfaction scores; EuroQol five-dimension scale; and Short Form Survey Physical Component Summary and Mental Component Summary scores) were compared using t-tests with a significance level of α = 0.05. There were no significant differences in body mass index (mean ± standard deviation) or sex (men [%]) between the short and long stem cohorts (32.3 ± 5.3, 36.3% and 31.5 ± 5.5, 38.2%, respectively; p > 0.05). Patients who had short stems were younger (65.9 ± 8.8 vs. 69.0 ± 9.4, p = 0.0323).Revision-free survivorship for the femoral or tibial component was 100% for long stems and 98.2% for short stems at 1 and 2 years, respectively (log-rank p = 0.6330). The two revisions in the short group were for infection, thus the survivorship for aseptic loosening was 100% at 2 years for both cohorts. There were no significant differences in preoperative or postoperative PROMs.This study demonstrated that highly porous printed metaphyseal cones provided rTKA with excellent early survivorship and similar PROMs whether a short or long stem was used. Additional studies will be needed to discern longer term differences.

Porous Tantalum Metaphyseal Cones for Severe Femoral and Tibial Bone Defects in Revision Total Knee Arthroplasty are Reliable for Fixation at Mean 5-Year Follow-Up

BACKGROUND

Porous tantalum metaphyseal cones may facilitate reconstructions of severe bone defects during revision total knee arthroplasty (TKA), but there remains a paucity of data on their outcomes at mean 5 years of follow-up. This study reports the component survivorship, patient satisfaction, functional outcomes, radiographic osseointegration, and complications of revision TKA with porous tantalum metaphyseal cones at mid-term (mean 5-year) follow-up.

METHODS

This study included 152 patients who had a mean age of 66 years (range, 33 to 86 years) undergoing revision TKA with porous tantalum metaphyseal cones. Indications for surgery included aseptic loosening (n = 87, 57.3%), second-stage reimplantation for infection (n = 42, 27.6%), osteolysis with well-fixed components (n = 20, 13.2%), and periprosthetic fracture (n = 3, 2.0%). Component survivorship, clinical outcomes, radiographic outcomes, and any complications were recorded. The mean follow-up time was 5.6 years (range, 2.2 to 13.7).

RESULTS

Survivorship was 100% when the end point was revision of the metaphyseal cone (no cones were revised) and 83.8% (95% confidence interval: 77.9 to 90.2%) when the end point was reoperation for any reason at 5-year follow-up. Reoperations were performed for infection (n = 10), instability (n = 4), periprosthetic fracture (n = 2), and quadriceps rupture/dehiscence (n = 3). The mean patient satisfaction score was 78.8 ± 11.3 and the mean Forgotten Joint Score was 62.2 ± 16.7 at the final follow-up. The preoperative median University of California at Los Angeles score improved from 2 (interquartile range 2 to 3) to 6 points (interquartile range 5 to 6) (P < .001), and the preoperative Oxford knee score improved from 15.2 ± 3.8 to 39.4 ± 5.1 points (P < .001) at the final follow-up. All metaphyseal cones showed radiographic evidence of osteointegration without any subsidence or loosening.

CONCLUSIONS

Porous tantalum metaphyseal cones enabled robust reconstructions of severe femoral and tibial bone defects during revision TKA. These reconstructions were associated with excellent survivorship, improvements in functional outcomes, and reproducible radiographic osseointegration at mean 5-year follow-up. The most common reasons for reoperation were infection and instability.

Outcomes of Metaphyseal Cones and Stem Fixation Following Rotating Hinge in Complex Primary and Revision Total Knee Arthroplasty

BACKGROUND

Although hinged prostheses have been used successfully in complex revision total knee arthroplasty (TKA), concerns exist regarding early failure due to aseptic loosening and other mechanical complications. The use of metaphyseal cones and hybrid cement fixation have been studied in unlinked constrained primary or revision TKA, but their impact on the survivorship of hinged prostheses has yet to be investigated.

METHODS

We identified a consecutive series of 164 hinged prostheses and collected data on demographics, indications, complications, and re-revisions in patients who had fully cemented versus hybrid stems, with and without metaphyseal cones. A multivariate analysis was performed to identify independent variables associated with re-revision as the primary end point.

RESULTS

In total, 84 patients (51.2%) had fully cemented stems, and 80 patients (48.8%) had hybrid stems. Cones were used in 73 patients (44.5%). At a mean follow-up of 3.4 ± 2.2 years, 42 patients underwent re-revision (25.8%), most commonly for infection (12.2%), followed by loosening (6.7%) and periprosthetic fracture (3.7%). Patients who had fully cemented stems had lower re-revision rates than hybrid fixation constructs (19 versus 26%, P = .043). Using multivariable regression, a construct with hybrid fixation with cones (odds ratio = 2.39; P = .037) was an independent risk factor for failure. Utilization of cones alone did not have an effect on re-revision rates at 3.4-year follow-up.

CONCLUSIONS

While we found no difference with the use of cones, patients undergoing revision TKA with a hinge prosthesis and fully cemented stems had better overall survivorship than hybrid stems.

Metaphyseal Fixation Using Cones and Sleeves for Severe Proximal Tibial Bone Loss

BACKGROUND

Tibial bone defects are commonly encountered in revision total knee arthroplasty (rTKA) and can be managed with metaphyseal cones or sleeves. Few studies have directly compared tibial cones and sleeves in rTKA, and none have limited this comparison to the most severe tibial defects. The purpose of this study was to evaluate and compare the outcomes of metaphyseal cones and sleeves for tibial reconstruction in rTKA regarding implant fixation and clinical outcomes.

METHODS

A retrospective review was conducted on patients undergoing rTKA in which metaphyseal cones or sleeves were utilized for addressing metaphyseal bone loss (34 cones and 18 sleeves). Tibial bone loss was classified according to the Anderson Orthopaedic Research Institute bone defect classification, with types 2B and 3 being included. Patient-reported outcomes and postoperative complications were collected, and a radiographic evaluation of osseointegration or loosening was performed.

RESULTS

There were 52 knees included (34 cones, 18 sleeves), with a median follow-up of 41.0 months. All-cause implant survival was 100% at 2 years and 96% (95% confidence interval: 76 to 99%) at 4 years, with 98% of tibial components demonstrating osseointegration at the final follow-up. During follow-up, there were a total 11 revisions, of which 1 sleeve was revised secondary to implant loosening. Tibial sleeves had a higher risk of revision compared to tibial cones (P < .01), and sleeves fixed with a hybrid technique were more likely to need revision than cones fixed by the same method (P = .01).

CONCLUSIONS

Porous metaphyseal tibial cones and tibial metaphyseal sleeves both performed well at a 41-month median follow-up with no difference in aseptic survivorship between the 2 constructs. Both demonstrate high rates of osseointegration, low rates of aseptic failure, and significant improvement in Knee Society Scores in patients with severe tibial defects in rTKA.

A systematic review and meta-analysis of hybrid vs. cemented stems - which method is more optimal for revision total knee arthroplasty?

INTRODUCTION

The number of primary and revision Total Knee Arthroplasty (TKA) cases are expected to increase in future. There are various advantages and disadvantage to employing either of the two main types of stem fixation methods - cemented or hybrid technique. This review aimed to study the most optimal fixation method for revision TKAs by comparing radiological outcomes and re-revision rates.

METHODS

A systematic review and meta-analysis was performed using PubMed and Cochrane Library from 2010 to identify studies explicitly comparing outcomes between cemented against hybrid fixation revision TKA techniques, with a minimum follow up of at least 24 months. A total of 8 studies was included in this review. Egger's test and visual inspection of the funnel plot did not reveal publication bias.

RESULTS

There was no statistically significant difference in radiological failure and loosening (OR 0.79, CI 0.37-1.66, I2 = 29%, p = 0.22), all causes of re-revision (OR 1.03, CI 0.73-1.44, I2 = 0%, p = 0.56) and aseptic revision (OR 0.74, CI 0.27-2.02, I2 = 0%, p = 0.41) between cemented and hybrid techniques. Functional and pain outcomes compared between the two fixation techniques were largely similar across the studies included in this meta-analysis.

CONCLUSION

Despite a trend favouring hybrid stems in revision TKA, current evidence revealed that radiological outcomes and re-revision rates are largely similar between cemented and hybrid fixation techniques.

Off-the-Shelf Tibial Cone Sizes May Not Accommodate All Patients' Bone Morphology and May Lead to Cortical Breaches in Revision Total Knee Arthroplasty: A 3D Modeling Study

Background

In revision total knee arthroplasty, tibial cones have demonstrated improved longevity and reduced incidence of aseptic loosening. Several currently available "off-the-shelf" (OTS) cone systems may not have sizes to accommodate all patient bone morphologies.

Methods

Computed tomographies from one hundred primary total knee arthroplasty patients and dimensions of 4 OTS cones were obtained. Press-fit stems were positioned in 3D tibia models to fit the diaphyseal trajectory. Cones were positioned around the stem at 1, 6, and 13 mm resections measured from the trough of the medial tibial plateau, simulating proximal tibial cuts and bone loss. Tibias were examined for cortical breaching following modeled cone preparation.

Results

Increased rate of breaching was observed as size and depth of the cone increased. In 2/49 (4.1%) male and 19/46 (41.3%) female tibias, cones could not be positioned without breaching. No breaches were found in 22/49 (45.0%) male and 5/46 (10.9%) female tibias. For every 1 centimeter increase in patient height, odds of breaching decreased by 12% (odds ratio: 0.88, confidence interval: 0.84, 0.92). For every size increase in cone width, odds of breaching increased by 34% (odds ratio: 1.34, confidence interval: 1.28, 1.47). Placing cones deeper also increased breaching compared to the 1 mm cut.

Conclusions

In revision total knee arthroplasty, smaller OTS or custom tibial cones may be needed to fit a patient's proximal tibial geometry. This is especially true in patients not accommodated by the OTS cone sizes we tested, which impacted shorter patients and/or those with substantial bone loss requiring more tibial resection and deeper cone placement. Use of smaller or custom tibial cones should be considered where indicated.

Clinical Outcomes of Offset Stem Couplers with or without Cone Augmentation in Revision Total Knee Arthroplasty

Intramedullary stems are often required in patients undergoing revision total knee arthroplasty (rTKA) to achieve stable fixation. Significant bone loss may require the addition of a metal cone to maximize fixation and osteointegration. The purpose of this study was to investigate clinical outcomes in rTKA using different fixation techniques. We conducted a single-institution retrospective review of all patients who received a tibial and femoral stem during rTKA between August 2011 and July 2021. Patients were separated into three cohorts based on fixation construct: press-fit stem with an offset coupler (OS), fully cemented straight (CS) stem, and press-fit straight (PFS) stem. A subanalysis of patients who received tibial cone augmentation was also conducted. A total of 358 patients who underwent rTKA were included in this study, of which 102 (28.5%) had a minimum 2-year follow-up and 25 (7.0%) had a minimum 5-year follow-up. In the primary analysis, 194 patients were included in the OS cohort, 72 in the CS cohort, and 92 in the PFS cohort. When stem type alone was considered, there was no significant difference in rerevision rate (p = 0.431) between cohorts. Subanalysis of patients who received augmentation with a tibial cone demonstrated that OS implants led to significantly higher rates of rerevision compared with the other two stem types (OS: 18.2% vs. CS: 2.1% vs. PFS: 11.1%; p = 0.037). The findings of the present analysis demonstrate that CS and cones in rTKA may provide more reliable long-term outcomes compared with press-fit stems with OS. LEVEL III EVIDENCE:  Retrospective Cohort Study.

Radiographic Cone Zone Classification of Metaphyseal Cone Fixation in Revision Total Knee Arthroplasty

Background

No objective radiographic scoring system exists to classify metaphyseal cone stability. Our purpose was to create a novel, systematic method to radiographically evaluate metaphyseal cone fixation based on radiographic findings suggestive of cone stability.

Methods

A retrospective analysis was conducted of revision total knee arthroplasty patients (6/2015-12/2017) using porous titanium femoral or tibial metaphyseal cones in conjunction with short cemented stems (50 mm-75 mm). Minimum follow-up was 2 years. Survivorship free of aseptic loosening and reoperation, as well as radiographic evaluation using a novel cone zone scoring system were analyzed.

Results

Forty-nine revision total knee arthroplasties were included in the study (12 femoral, 48 tibial cones), the majority, performed for aseptic loosening (25/49, 51%). Median follow-up was 39 months (range 25-58). Using the radiographic cone zone scoring method, >90% of all femoral cones were classified as likely stable or stable with strong, statistically significant intraclass correlations between all 3 reviewers. Similarly, >97% of all tibial cones were classified as likely stable or stable, with moderate, statistically significant intraclass correlations between all 3 reviewers. Only 1 femoral and 1 tibial cone were considered at risk of loosening. The study sample demonstrated 100% survivorship free of revision for aseptic loosening without evidence of radiographic loosening in any case.

Conclusions

Using a novel systematic cone zone scoring and classification method, the overwhelming majority of femoral and tibial cones were classified as likely stable or stable, with no identified cases of aseptic loosening or related revision. Further studies are needed to validate this objective classification method.

How to remove a well-fixed metaphyseal sleeve in revision knee arthroplasty: A step-by-step surgical procedure

BACKGROUND

The rising incidence and complexity of revision knee arthroplasty has led to an increase in the use of metaphyseal reconstruction systems. One of the most widely used systems are metaphyseal sleeves as they have demonstrated excellent long-term survival. However, there is concern about the possible difficulty of extracting a sleeve if it were necessary, as no known procedures have yet been validated.

METHODS

We examined the outcomes of removing 23 well-integrated metaphyseal sleeves using the same systematized technique.

RESULTS

All sleeves were extracted without any intraoperative complications. Four subjects required an osteotomy to complete the extraction, while 62% of the sample were found to have an AORI IIB defect. All cases were successfully reconstructed with a new metaphyseal fixation, implanting a new sleeve in 38% of subjects compared with cones in the remaining 62%.

CONCLUSIONS

The technique described here produced successful, reproducible outcomes for the removal of integrated metaphyseal sleeves with minimal bone loss and no intraoperative complications.

Excellent mid- to long-term survival of tantalum metal cones in a case series of revision knee arthroplasty with severe bony defects

PURPOSE

Severe metaphyseal bone defects remain a challenge and represent a growing problem in revision total knee arthroplasty (RTKA). The purpose of this study was to examine the survival of first-generation tantalum metal cones (TMC) and to assess clinical and radiographic data obtained from mid- to long-term follow-ups (FU) after RTKA with severe bony defects.

METHODS

This retrospective case series included 100 consecutive patients of the same centre, who underwent RTKA surgery with TMC for tibia and/or femur bone defects between January 2011 and December 2015. Fourteen patients had died and six were lost for FU, leaving a total of eighty patients (one hundred and twelve TMC) for final evaluation. Clinical parameters including the Knee Society Score (KSS), visual analogue scale (VAS), Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) and range of motion (ROM) were determined preoperatively based on the patients' medical charts, and assessed again during the final FU after an average of 6.1 (5-9) years postoperative. Standardised postoperative X-rays were analysed during the final FU visit for osseointegration of the cones, and any signs of implant loosening were assessed with the modified Knee Society Radiographic review criteria. Perioperative and postoperative complications, reoperations, as well as implant and cone re-revisions were analysed. Survivorship analysis was performed with (a) cone-related revision for any reason and (b) implant component revision for any reason.

RESULTS

Previous RTKA had to be performed due to 64 (80%) aseptic and 16 (20%) septic failures. At the final FU, 75 (94%) tibia and 76 (95%) femur TMCs and implants were clinically stable. One patient experienced loosening of cones and implants at the femur and tibia but denied re-revision surgery. There were eight (10%) reoperations including two early wound healing problems, two inlay changes, two periprosthetic fractures, one debridement, antibiotics and implant retention (DAIR), and one secondary patella replacement. The six (7.5%) re-revisions included two aseptic loosening's of the opposite implant without TMC, one arthrodesis for recurrent instability, and three deep infections managed by two two-stage exchanges, and one amputation for persistent infection. At re-revision, all TMC cones were osteointegrated without signs of loosening. The determined clinical parameters showed significant (p < 0.001) postoperative improvement, and objective KSS was rated as excellent in 51%, and as good in 22% of patients at the final FU. The estimated 8-year Kaplan-Meier survival was 95% for TMC and 92.5% for implant components.

CONCLUSION

Tantalum metal cones (TMC) demonstrate a secure fixation for treatment of severe femoral and tibial metaphyseal bone defects during RTKA. This fixation concept showed excellent mid- to long-term clinical and radiographic outcomes with promising 8-year survival rates for cones and implant components.

LEVEL OF EVIDENCE

Retrospective cohort study, Level IV.

Is hybrid fixation in revision TKA using LCCK prostheses reliable?

INTRODUCTION

The optimal technique for component fixation in revision total knee arthroplasty (rTKA) remains controversial: full cementation (FC) versus hybrid fixation (HF), which involves press-fit stem with cement fixation in the metaphyseal and epiphyseal zones. Previous series have either demonstrated the superiority of one or the other of these techniques or their equivalence. However, few studies have compared these 2 methods for rTKA using the Legacy® Constrained Condylar Knee (LCCK) prosthesis (Zimmer, Warsaw, Indiana, USA).

HYPOTHESIS

Our hypothesis was that HF of LCCK components is associated with a higher rate of aseptic loosening (AL) than FC.

MATERIALS AND METHODS

This was a single-center, multi-surgeon, retrospective study. Primary revisions between January 2010 and December 2014 were included for all indications. The only exclusion criterion was death without revision before the 5-year follow-up. The primary objective of this study was to compare the survivorship of 2 groups of LCCK components (femoral or tibial), depending on whether their stems had been cemented (HF versus FC), taking AL, revised or not, as the endpoint. The secondary objective was to look for other predictive factors of AL.

RESULTS

A total of 75 rTKAs (150 components) were included. The FC group (51 components) had more Anderson Orthopedic Research Institute (AORI) type 2B and type 3 bone defects (BDs) (p<0.001), more reconstructions using trabecular metal (TM) cones (19 FCs and 5 HFs; p<0.001), and bone allografts (p<0.001). At more than 5 years, none of the FC components were loose compared to 10 HF components (9.4%), with 4 of these stems revised. The only significant difference was survivorship without radiographic AL at 9 years (FC=100%; HF=78.6%; p=0.04). The only predictive factor of AL in the HF group was the filling of the diaphyseal canal (p<0.01). The detrimental effect of BD severity (p=0.78) and the protective effect of TM cones were not demonstrated (p=0.21).

DISCUSSION

Other series studying revisions using the same type of prosthesis also concluded the superiority of FC, not found for other revision prostheses. Despite this study's limitations (retrospective, multi-surgeon, limited sample size, and limited follow-up), all patient outcomes were known, and the difference in survivorship between the groups was very significant.

CONCLUSION

HF has not been proven effective for the LCCK prosthesis. Better diaphyseal filling, wider metaphyseal bone tunnels enabling better cement injections, and stem designs more appropriate for press-fit fixation could improve these results. TM cones are an interesting avenue for further research.

LEVEL OF EVIDENCE

III; retrospective comparative study.

Physical activity after revision knee arthroplasty including return to sport and work: a systematic review and meta-analysis including GRADE

BACKGROUND

The number of primary knee arthroplasties (KAs) performed annually is rising, especially among active, working age patients. Consequently, revision KA is also increasingly performed. Our aim was to systematically review the extent to which patients were physically active following revision KA, and the rate and timing of return to sport and work.

METHODS

A search was conducted in the databases Medline and Embase until February 24th, 2023. Studies describing patients with revision total knee arthroplasty (rTKA) or revision unicondylar knee arthroplasty (rUKA), with outcomes regarding physical activity or return to sport (RTS) or work (RTW) were included. Quality of studies was assessed using the Newcastle-Ottawa scale, meta-analyses were performed using RevMan 5.4 and Grading of Recommendations, Assessment, Development, and Evaluations (GRADE).

RESULTS

Of the 4,314 articles screened, 22 studies were included describing 2,462 rTKA patients (no rUKA), 42% were male with a mean age of 67 years (range 24 - 95). No studies reported objective physical activity measurements. Twenty-two studies reported patient reported outcome measures (PROMs). The PROMs that were pooled on a scale from zero to ten were the UCLA Activity Score, the Tegner Activity Level Scale, the Lower-Extremity Activity Scale, Devane Activity Score, and physical activity related subscales of the Knee injury and Osteoarthritis Outcome Score. The retrospective studies of moderate quality showed a statistically significant postoperative improvement of 1.7 points (MD = 1.71, 95% CI 1.48 - 1.94 (p < 0.0001); 14 studies, n = 1,211). For the prospective moderate-quality studies, a statistically significant postoperative increase of 0.9 points was found (MD = 0.89, 95% CI 0.48 - 1.30 (p < 0.0001); 6 studies, n = 1,027). Regarding RTS, 12% of patients participated in so-called 'non-recommended' activities (i.e., hockey, soccer, football, gymnastics, jogging, singles tennis, and basketball) after rTKA (1 study, n = 206). The pooled RTW was 86% (2 studies, range 18-95%, n = 234).

CONCLUSIONS

The majority of patients self-reported an improved postoperative activity level after rTKA. Patients could maintain an active lifestyle in daily life, including sports and work. For reliable physical activity, RTS and RTW estimations, more studies are required. In terms of GRADE, the quality of evidence for the five prospective studies was rated as low.

LEVEL OF EVIDENCE

Level 3.

Metaphyseal cones and sleeves are similar in improving short- and mid-term outcomes in Total Knee Arthroplasty revisions

PURPOSE

The purpose of this systematic review and metanalysis was to assess clinical and radiological outcomes of metaphyseal sleeves and cones and to identify their possible advantages and disadvantages.

METHODS

A comprehensive search from the inception of the databases to March 2021 was performed on Medline, Scopus, CINAHL, Cochrane, Embase, Ovid, and Google scholar databases. Coleman Methodology Score was used for quality assessment. Author, year of publication, type of study, level of evidence, sample size, number of patients, number of knees treated, mean age, gender, mean follow-up, clinical outcomes, complications, the reason for revision and, type of prosthesis were extracted for analysis. Clinical studies providing data about patient's outcomes after the primary and Total Knee Arthroplasty revision with the usage of sleeves or cones and a minimum of 2 years of follow-up were included.

RESULTS

The literature search and cross-referencing resulted in a total of 93 articles, but only 30 articles were appropriate for the systematic review. Comparable clinical results were reported between cones and sleeves. The meta-analysis showed a greater incidence of intraoperative fractures in patients treated with sleeves (1.6%, [95% CI 0.7; 3.4] in cones and 4.6%, [95% CI 3.3; 6.4] in sleeves, p = 0.01), while the risk of postoperative fractures (4.3%, [95% CI 2.7; 7] in cones and 2.1%, [95% CI 1.2; 3.5] in sleeves, p = 0.04) and infections (8.5%, [95% CI 6; 12] in cones and 3.7%, [95% CI 2.1; 7.3] in sleeves, p = 0.03) was higher with cones.

CONCLUSION

A higher incidence of intraoperative fracture was reported in patients treated with sleeves, while a higher rate of postoperative fractures and infections was described in patients treated with cones. Nonetheless, complications were reported in both groups.

LEVEL OF EVIDENCE

III.

Novel metaphyseal porous titanium cones allow favorable outcomes in revision total knee arthroplasty

INTRODUCTION

Loosening and migration are common modes of aseptic failure following complex revision total knee arthroplasty (rTKA). Metaphyseal cones allow surgeons to negotiate the loss of femoral and tibial bone stock while obtaining stable bony fixation. This study examines the mid-term functional and radiographic outcomes in patients undergoing rTKA utilizing a novel metaphyseal cone system with stems of variable length and fixation methods.

METHODS

This two-center retrospective study examined all patients who underwent rTKA with a novel porous, titanium tibial or femoral cone in combination with a stem of variable length and fixation who had a minimum follow-up of 2-years. Outcome analysis was separated into tibial and femoral cones as well as the stem fixation method (hybrid vs. fully cemented).

RESULTS

Overall, 123 patients who received 156 cone implants were included (74 [60.2%] tibial only, 16 [13.0%] femoral only, and 33 [26.8%] simultaneous tibial and femoral) with a mean follow-up of 2.76 ± 0.66 years. At 2-years of follow-up the total cohort demonstrated 94.3% freedom from all-cause re-revisions, 97.6% freedom from aseptic re-revisions, and 99.4% of radiographic cone osteointegration. All-cause revision rates did not differ between stem fixation techniques in both the tibial and femoral cone groups.

CONCLUSION

The use of a novel porous titanium femoral and tibial metaphyseal cones combined with stems in patients with moderate to severe bone defects undergoing complex revision total knee arthroplasty confers excellent results independent of stem fixation technique.

LEVEL OF EVIDENCE

IV, case series.

Bone defect classifications in revision total knee arthroplasty, their reliability and utility: a systematic review

BACKGROUND

There are various classification systems described in the literature for managing bone defects in revision knee arthroplasty (RTKA). We analysed the reliability and usefulness of these classification systems.

QUESTIONS/PURPOSES

(1) To review and critique the various classification systems proposed for bone loss in RTKA. (2) Among all the proposed classifications which one is the most commonly used by surgeons to report their results. (3) What is the reliability of various bone defect classification systems for RTKA. In this review, we have assessed the studies validating those classifications with a detailed description of the limitations and the proposed modifications.

METHODS

This systematic review was conducted following PRISMA guidelines. Pubmed/Medline, CINAHL, EMBASE, Scopus, Cochrane databases and Web of Science databases were searched using multiple search terms and MeSH terms where possible. Studies meeting inclusion criteria were assessed for statistical parameters of reliability of a classification system.

RESULTS

We found 16 classification systems for bone defects in RTKA. Six studies were found evaluating a classification system with reporting their reliability parameters. Fifty-four studies were found which classified bone loss using AORI classification in their series. AORI classification is most commonly reported for classifying bone defects. Type T2B and F2B are the most common bone defects in RTKA. The average kappa value for AORI classification for femoral bone loss was 0.38 (0.27-0.50) and 0.76 (0.63-1) for tibial bone loss assessment.

CONCLUSION

None of the available classification systems is reliably established in determining the bone loss and treatment plans in RTKA. Among all, AORI classification is the most widely used system in clinical practice. The reliability of AORI Classification is fair for femoral bone loss and substantial for tibial bone loss.

No difference in long-term micromotion between fully cemented and hybrid fixation in revision total knee arthroplasty: a randomized controlled trial

AIMS

Both the femoral and tibial component are usually cemented at revision total knee arthroplasty (rTKA), while stems can be added with either cemented or press-fit (hybrid) fixation. The aim of this study was to compare the long-term stability of rTKA with cemented and press-fitted stems, using radiostereometric analysis (RSA).

METHODS

This is a follow-up of a randomized controlled trial, initially involving 32 patients, of whom 19 (nine cemented, ten hybrid) were available for follow-up ten years postoperatively, when further RSA measurements were made. Micromotion of the femoral and tibial components was assessed using model-based RSA software (RSAcore). The clinical outcome was evaluated using the Knee Society Score (KSS), the Knee injury and Osteoarthritis Outcome Score (KOOS), and visual analogue scale (pain and satisfaction).

RESULTS

The median total femoral translation and rotation at ten years were 0.39 mm (interquartile range (IQR) 0.20 to 0.54) and 0.59° (IQR 0.46° to 0.73°) for the cemented group and 0.70 mm (IQR 0.15 to 0.77) and 0.78° (IQR 0.47° to 1.43°) for the hybrid group. For the tibial components this was 0.38 mm (IQR 0.33 to 0.85) and 0.98° (IQR 0.38° to 1.34°) for the cemented group and 0.42 mm (IQR 0.30 to 0.52) and 0.72° (IQR 0.62° to 0.82°) for the hybrid group. None of these values were significantly different between the two groups and there were no significant differences between the clinical scores in the two groups at this time. There was only one re-revision, in the hybrid group, for infection and not for aseptic loosening.

CONCLUSION

These results show good long-term fixation with no difference in micromotion and clinical outcome between fully cemented and hybrid fixation in rTKA, which builds on earlier short- to mid-term results. The patients all had type I or II osseous defects, which may in part explain the good results. Cite this article: Bone Joint J 2022;104-B(7):875-883.

Tibial metaphyseal cones combined with short stems perform as well as long stems in revision total knee arthroplasty

Backgrounds

There is uncertainty around optimal tibial stem length in revision total knee arthroplasty (rTKA) utilizing a tibial trabecular metal (TM) cone. The purpose of this study was to compare: (1) functional outcomes, (2) radiographic outcomes and (3) implant survivorship in rTKA utilizing TM cones combined with either short stems (SS) or long stems (LS) at minimum 2 years follow‐up.

Methods

In this retrospective, multi‐centre study, patients undergoing rTKA utilizing a TM cone between 2008 and 2019 were included. Patients were divided into: SS group (no diaphyseal engagement), and LS group (diaphyseal engagement). All relevant clinical charts and post‐operative radiographs were examined. Oxford Knee Score (OKS) and EuroQol‐5D (EQ‐5D‐5L) data were collected at most recent follow‐up.

Results

In total, 44 patients were included: 18 in the SS group and 26 in the LS group. The mean time of follow‐up was 4.0 years. Failure free survival was 94.4% for the SS group and 92.3% for the LS group. All failures were for prosthetic joint infections managed with debridement, antibiotics, and implant retention. At most recent follow‐up, 3 patients demonstrated radiographic signs of lucency (1 SS 2 LS, P = 1) and the mean OKS were 37 ± 4 and 36 ± 6 (P = 0.73) in the SS and LS groups, respectively.

Conclusion

Tibial SS combined with TM cones performed as well as LS in rTKA at minimum 2 years follow‐up. A tibial SS in combination with a TM cone is a reliable technique to achieve stable and durable fixation in rTKA.

Comparison of Different Strategies in Revision Arthroplasty of the Knee with Severe Bone Loss: A Systematic Review and Meta-Analysis of Clinical Outcomes

BACKGROUND

In revision total knee arthroplasty large bone lesions can jeopardize correct implant orientation and fixation. Different strategies have been proposed to tackle this issue. The purpose of this review and meta-analysis is to evaluate the midterm clinical and survivorship results of porous cones and porous-coated sleeves compared to morselized and structural grafts.

METHODS

We performed a systematic review of the literature on the different strategies targeting moderate to large metaphyseal bone defects. The literature was evaluated for methodological quality. We analyzed results on survivorship using logistic regression correcting for follow-up time and number of knees. We compared these results using forest plots for early and midterm follow-up. Clinical outcome was evaluated by comparing standardized mean difference of patient-related outcome measures.

RESULTS

A total of 77 articles analyzing 4,391 knees were included. The logistic regression curve showed a nonsignificant odds ratio (OR) at 10 years of 0.91 (95% confidence interval [CI] 0.699-1.192, P = .49) for failure comparing all porous implants with all grafting procedures. The available clinical reports show a bigger standardized mean difference increase for tantalum cones (OR 3.04, 95% CI 1.71-4.37) than for porous sleeves (OR 1.72, 95% CI 0.88-2.57).

CONCLUSION

Our analysis shows that the size and quality of the literature on metaphyseal bone defects is progressively improving. Porous implants are effective in tackling metaphyseal bone defects showing good survivorship outcome at midterm follow-up. In younger patients with less constrained prosthetic implants, surgeons might still consider the use of grafts without risking worse outcomes.

Survivorship and Radiographic Evaluation of Metaphyseal Cones With Short Cemented Stems in Revision Total Knee Arthroplasty

BACKGROUND

The purpose of this study is to evaluate the survivorship and radiographic outcomes of a single design of metaphyseal cone used in conjunction with short cemented stems.

METHODS

A retrospective analysis was conducted of revision total knee arthroplasty (rTKA) patients (June 2015 to December 2017) using porous titanium femoral or tibial cones in conjunction with short cemented stems (50-75 mm). Minimum follow-up was 2 years. Survivorship, complications, and a modified Knee Society Radiographic score were analyzed.

RESULTS

Forty-nine rTKAs were included in the study (12 femoral cones, 48 tibial cones). Varus-valgus constraint was used in 28 (57%) and a hinged bearing was used in 3 (6%) of these constructs. The majority were index rTKAs of primary components (86%), performed for aseptic loosening (51%) and reimplantation following staged treatment for infection (37%). Median follow-up was 39 months (range 25-58). Using a modified Knee Society Radiographic score, all constructs were classified as stable. Postoperatively, 4 rTKAs were complicated by recurrent infection (8%), periprosthetic fracture 2 (4%), and superficial wound infection 1 (2%). Seven rTKAs (14%) required reoperation. The majority of reoperations (4 rTKAs) were debridement and irrigation with implant retention for infection. Metaphyseal cone constructs with short cemented stems demonstrated 100% survivorship free of revision for aseptic loosening without evidence of radiographic loosening in any case.

CONCLUSION

Our results demonstrate excellent outcomes with the use of metaphyseal cones with short cemented stems at mid-term follow-up. This construct avoids the use of long-stem fixation with the associated extraction difficulty, end of stem pain, and potential for malposition at the joint line.

LEVEL OF EVIDENCE

IV, Case Series.

Do Metaphyseal Cones and Stems Provide Any Biomechanical Advantage for Moderate Contained Tibial Defects in Revision TKA? A Finite-Element Analysis Based on a Cadaver Model

BACKGROUND

Satisfactory management of bone defects is important to achieve an adequate reconstruction in revision TKA. Metaphyseal cones to address such defects in the proximal tibia are increasingly being used; however, the biomechanical superiority of cones over traditional techniques like fully cementing the implant into the defect has not yet been demonstrated. Moreover, although long stems are often used to bypass the defects, the biomechanical efficacy of long stems compared with short, cemented stems when combined with metaphyseal cones remains unclear.

QUESTIONS/PURPOSES

We developed and validated finite-element models of nine cadaveric specimens to determine: (1) whether using cones for addressing moderate metaphyseal tibial defects in revision TKA reduces the risk of implant-cement debonding compared with cementing the implant alone, and (2) when using metaphyseal cones, whether long, uncemented stems (or diaphyseal-engaging stems) reduce the risk of implant-cement debonding and the cone-bone micromotions compared with short, cemented stems.

METHODS

We divided nine cadaveric specimens (six male, three female, aged 57 to 73 years, BMI 24 to 47 kg/m2) with standardized tibial metaphyseal defects into three study groups: no cone with short (50-mm) cemented stem, in which the defect was filled with cement; cone with short (50-mm) cemented stem, in which a metaphyseal cone was implanted before cementing the implant; and cone with long, diaphyseal-engaging stem, which received a metaphyseal cone and the largest 150-mm stem that could fit the diaphyseal canal. The specimens were implanted and mechanically tested. Then, we developed and validated finite-element models to investigate the interaction between the implant and the bone during the demanding activity of stair ascent. We quantified the risk of implant debonding from the cement mantle by comparing the axial and shear stress at the cement-implant interface against an experimentally derived interface failure index criterion that has been previously used to quantify the risk of cement debonding. We considered the risk of debonding to be minimal when the failure index was below 10% of the strength of the interface (or failure index < 0.1). We also quantified the micromotion between the cone and the bone, as a guide to the likelihood of fixation by bone ingrowth. To this end, we assumed bone ingrowth for micromotion values below the most restrictive reported threshold for bone ingrowth, 20 µm.

RESULTS

When using a short, 50-mm cemented stem and cement alone to fill the defect, 77% to 86% of the cement-implant interface had minimal risk of debonding (failure index < 0.1). When using a short, 50-mm cemented stem with a cone, 87% to 93% of the cement-implant interface had minimal debonding risk. When combining a cone with a long (150-mm) uncemented stem, 92% to 94% of the cement-implant interface had minimal debonding risk. The differences in cone-bone micromotion between short, cemented stems and long, uncemented stems were minimal and, for both configurations, most cones had micromotions below the most restrictive 20-µm threshold for ingrowth. However, the maximum micromotion between the cone and the bone was in general smaller when using a long, uncemented stem (13-23 µm) than when using a short, cemented stem (11-31 µm).

CONCLUSION

Although the risk of debonding was low in all cases, metaphyseal cones help reduce the biomechanical burden on the implant-cement interface of short-stemmed implants in high-demand activities such as stair ascent. When using cones in revision TKA, long, diaphyseal-engaging stems did not provide a clear biomechanical advantage over short stems. Future studies should explore additional loading conditions, quantify the interspecimen variability, consider more critical defects, and evaluate the behavior of the reconstructive techniques under repetitive loads.

CLINICAL RELEVANCE

Cones and stems are routinely used to address tibial defects in revision TKA. Despite our finding that metaphyseal cones may help reduce the risk of implant-cement debonding and allow using shorter stems with comparable biomechanical behavior to longer stems, either cones or cement alone can provide comparable results in contained metaphyseal defects. However, longer term clinical studies are needed to compare these techniques over time.

3D-printed titanium metaphyseal cones in revision total knee arthroplasty with cemented and cementless stems

AIMS

Porous metaphyseal cones can be used for fixation in revision total knee arthroplasty (rTKA) and complex TKAs. This metaphyseal fixation has led to some surgeons using shorter cemented stems instead of diaphyseal engaging cementless stems with a potential benefit of ease of obtaining proper alignment without being beholden to the diaphysis. The purpose of this study was to evaluate short term clinical and radiographic outcomes of a series of TKA cases performed using 3D-printed metaphyseal cones.

METHODS

A retrospective review of 86 rTKAs and nine complex primary TKAs, with an average age of 63.2 years (SD 8.2) and BMI of 34.0 kg/m² (SD 8.7), in which metaphyseal cones were used for both femoral and tibial fixation were compared for their knee alignment based on the type of stem used. Overall, 22 knees had cementless stems on both sides, 52 had cemented stems on both sides, and 15 had mixed stems. Postoperative long-standing radiographs were evaluated for coronal and sagittal plane alignment. Adjusted logistic regression models were run to assess malalignment hip-knee-ankle (HKA) alignment beyond ± 3° and sagittal alignment of the tibial and femoral components ± 3° by stem type.

RESULTS

No patients had a revision of a cone due to aseptic loosening; however, two had revision surgery due to infection. In all, 26 (27%) patients had HKA malalignment; nine (9.5%) patients had sagittal plane malalignment, five (5.6%) of the tibia, and four (10.8%) of the femur. After adjusting for age, sex, and BMI, there was a significantly increased risk for malalignment when a cone was used and both the femur and tibia had cementless compared to cemented stems (odds ratio 3.19, 95% confidence interval 1.01 to 10.05).

CONCLUSION

Porous 3D-printed cones provide excellent metaphyseal fixation. However, these central cones make the use of offset couplers difficult and may generate malalignment with cementless stems. We found 3.19-times higher odds of malalignment in our TKAs performed with metaphyseal cones and both femoral and tibial cementless stems. Cite this article: Bone Joint J 2021;103-B(6 Supple A):150-157.

[Economic evaluation of porous metal cones in total knee arthroplasty]

INTRODUCTION

The use of porous metal cones (PMC) to fill bone loss during knee replacements is increasing, but these medical devices are not reimbursed in addition to diagnosis related tariffs (DRTs). The economic impact of PMC may be significant for hospitals.

MATERIAL AND METHODS

This multicenter observational study includes all patients who benefited of a total knee prosthesis, with reconstruction by PMC, between June 2014 and June 2019, in two French university hospitals. The costs of each diagnosis related group (DRG) was evaluated using the "étude nationale des coûts à méthodologie commune (ENC)". The PMC costs were compared with the amounts of DRG and with the fares perceived by the hospital from the French sickness fund (DRTs).

RESULTS

96 patients (103 stays) benefited from the implantation of 195 cones. The hospital incomes were 10,970±1401€ /stay. Spending associated with PMC represented 35% of DRGs and 44% of DRTs. The average additional cost related to the cones was 2709±1138€ /stay. If the reconstructions had been performed by allograft, the average gain for hospitals would have been 108€ /stay.

CONCLUSION

If PMC have clinical benefits for surgeons in reducing the incidence of revision, this study shows the inadequacy of the funding of these devices for French hospitals. This suggests the need to expand the possibilities of supporting innovative technologies.