Neural network classifier optimization using Differential Evolution with Global Information and Back Propagation algorithm for clinical datasets

Boundary delineation in transrectal ultrasound images for region of interest of prostate

Accurate and robust prostate segmentation in transrectal ultrasound (TRUS) images is of great interest for ultrasound-guided brachytherapy for prostate cancer. However, the current practice of manual segmentation is difficult, time-consuming, and prone to errors. To overcome these challenges, we developed an accurate prostate segmentation framework (A-ProSeg) for TRUS images. The proposed segmentation method includes three innovation steps: (1) acquiring the sequence of vertices by using an improved polygonal segment-based method with a small number of radiologist-defined seed points as prior points; (2) establishing an optimal machine learning-based method by using the improved evolutionary neural network; and (3) obtaining smooth contours of the prostate region of interest using the optimized machine learning-based method. The proposed method was evaluated on 266 patients who underwent prostate cancer brachytherapy. The proposed method achieved a high performance against the ground truth with a Dice similarity coefficient of 96.2% ± 2.4%, a Jaccard similarity coefficient of 94.4% ± 3.3%, and an accuracy of 95.7% ± 2.7%; these values are all higher than those obtained using state-of-the-art methods. A sensitivity evaluation on different noise levels demonstrated that our method achieved high robustness against changes in image quality. Meanwhile, an ablation study was performed, and the significance of all the key components of the proposed method was demonstrated.

Intelligent contour extraction approach for accurate segmentation of medical ultrasound images

Introduction: Accurate contour extraction in ultrasound images is of great interest for image-guided organ interventions and disease diagnosis. Nevertheless, it remains a problematic issue owing to the missing or ambiguous outline between organs (i.e., prostate and kidney) and surrounding tissues, the appearance of shadow artifacts, and the large variability in the shape of organs. Methods: To address these issues, we devised a method that includes four stages. In the first stage, the data sequence is acquired using an improved adaptive selection principal curve method, in which a limited number of radiologist defined data points are adopted as the prior. The second stage then uses an enhanced quantum evolution network to help acquire the optimal neural network. The third stage involves increasing the precision of the experimental outcomes after training the neural network, while using the data sequence as the input. In the final stage, the contour is smoothed using an explicable mathematical formula explained by the model parameters of the neural network. Results: Our experiments showed that our approach outperformed other current methods, including hybrid and Transformer-based deep-learning methods, achieving an average Dice similarity coefficient, Jaccard similarity coefficient, and accuracy of 95.7 ± 2.4%, 94.6 ± 2.6%, and 95.3 ± 2.6%, respectively. Discussion: This work develops an intelligent contour extraction approach on ultrasound images. Our approach obtained more satisfactory outcome compared with recent state-of-the-art approaches . The knowledge of precise boundaries of the organ is significant for the conservation of risk structures. Our developed approach has the potential to enhance disease diagnosis and therapeutic outcomes.

A Robust and Explainable Structure-Based Algorithm for Detecting the Organ Boundary From Ultrasound Multi-Datasets

Detecting the organ boundary in an ultrasound image is challenging because of the poor contrast of ultrasound images and the existence of imaging artifacts. In this study, we developed a coarse-to-refinement architecture for multi-organ ultrasound segmentation. First, we integrated the principal curve-based projection stage into an improved neutrosophic mean shift-based algorithm to acquire the data sequence, for which we utilized a limited amount of prior seed point information as the approximate initialization. Second, a distribution-based evolution technique was designed to aid in the identification of a suitable learning network. Then, utilizing the data sequence as the input of the learning network, we achieved the optimal learning network after learning network training. Finally, a scaled exponential linear unit-based interpretable mathematical model of the organ boundary was expressed via the parameters of a fraction-based learning network. The experimental outcomes indicated that our algorithm 1) achieved more satisfactory segmentation outcomes than state-of-the-art algorithms, with a Dice score coefficient value of 96.68 ± 2.2%, a Jaccard index value of 95.65 ± 2.16%, and an accuracy of 96.54 ± 1.82% and 2) discovered missing or blurry areas.

Ultrasound Prostate Segmentation Using Adaptive Selection Principal Curve and Smooth Mathematical Model

Accurate prostate segmentation in ultrasound images is crucial for the clinical diagnosis of prostate cancer and for performing image-guided prostate surgery. However, it is challenging to accurately segment the prostate in ultrasound images due to their low signal-to-noise ratio, the low contrast between the prostate and neighboring tissues, and the diffuse or invisible boundaries of the prostate. In this paper, we develop a novel hybrid method for segmentation of the prostate in ultrasound images that generates accurate contours of the prostate from a range of datasets. Our method involves three key steps: (1) application of a principal curve-based method to obtain a data sequence comprising data coordinates and their corresponding projection index; (2) use of the projection index as training input for a fractional-order-based neural network that increases the accuracy of results; and (3) generation of a smooth mathematical map (expressed via the parameters of the neural network) that affords a smooth prostate boundary, which represents the output of the neural network (i.e., optimized vertices) and matches the ground truth contour. Experimental evaluation of our method and several other state-of-the-art segmentation methods on datasets of prostate ultrasound images generated at multiple institutions demonstrated that our method exhibited the best capability. Furthermore, our method is robust as it can be applied to segment prostate ultrasound images obtained at multiple institutions based on various evaluation metrics.

Application of Meta-Heuristic Algorithms for Training Neural Networks and Deep Learning Architectures: A Comprehensive Review

The learning process and hyper-parameter optimization of artificial neural networks (ANNs) and deep learning (DL) architectures is considered one of the most challenging machine learning problems. Several past studies have used gradient-based back propagation methods to train DL architectures. However, gradient-based methods have major drawbacks such as stucking at local minimums in multi-objective cost functions, expensive execution time due to calculating gradient information with thousands of iterations and needing the cost functions to be continuous. Since training the ANNs and DLs is an NP-hard optimization problem, their structure and parameters optimization using the meta-heuristic (MH) algorithms has been considerably raised. MH algorithms can accurately formulate the optimal estimation of DL components (such as hyper-parameter, weights, number of layers, number of neurons, learning rate, etc.). This paper provides a comprehensive review of the optimization of ANNs and DLs using MH algorithms. In this paper, we have reviewed the latest developments in the use of MH algorithms in the DL and ANN methods, presented their disadvantages and advantages, and pointed out some research directions to fill the gaps between MHs and DL methods. Moreover, it has been explained that the evolutionary hybrid architecture still has limited applicability in the literature. Also, this paper classifies the latest MH algorithms in the literature to demonstrate their effectiveness in DL and ANN training for various applications. Most researchers tend to extend novel hybrid algorithms by combining MHs to optimize the hyper-parameters of DLs and ANNs. The development of hybrid MHs helps improving algorithms performance and capable of solving complex optimization problems. In general, the optimal performance of the MHs should be able to achieve a suitable trade-off between exploration and exploitation features. Hence, this paper tries to summarize various MH algorithms in terms of the convergence trend, exploration, exploitation, and the ability to avoid local minima. The integration of MH with DLs is expected to accelerate the training process in the coming few years. However, relevant publications in this way are still rare.

The Prediction of Peritoneal Carcinomatosis in Patients with Colorectal Cancer Using Machine Learning

The incidence of colon, rectal, and colorectal cancer is very high, and diagnosis is often made in the advanced stages of the disease. In cases where peritoneal carcinomatosis is limited, patients can benefit from newer treatment options if the disease is promptly identified, and they are referred to specialized centers. Therefore, an essential diagnostic benefit would be identifying those factors that could lead to early diagnosis. A retrospective study was performed using patient data gathered from 2010 to 2020. The collected data were represented by routine blood tests subjected to stringent inclusion and exclusion criteria. In order to determine the presence or absence of peritoneal carcinomatosis in colorectal cancer patients, three types of machine learning approaches were applied: a neuro-evolutive methodology based on artificial neural network (ANN), support vector machines (SVM), and random forests (RF), all combined with differential evolution (DE). The optimizer (DE in our case) determined the internal and structural parameters that defined the ANN, SVM, and RF in their optimal form. The RF strategy obtained the best accuracy in the testing phase (0.75). Using this RF model, a sensitivity analysis was applied to determine the influence of each parameter on the presence or absence of peritoneal carcinomatosis.

Semi-Automatic Prostate Segmentation From Ultrasound Images Using Machine Learning and Principal Curve Based on Interpretable Mathematical Model Expression

Accurate prostate segmentation in transrectal ultrasound (TRUS) is a challenging problem due to the low contrast of TRUS images and the presence of imaging artifacts such as speckle and shadow regions. To address this issue, we propose a semi-automatic model termed Hybrid Segmentation Model (H-SegMod) for prostate Region of Interest (ROI) segmentation in TRUS images. H-SegMod contains two cascaded stages. The first stage is to obtain the vertices sequences based on an improved principal curve-based model, where a few radiologist-selected seed points are used as prior. The second stage is to find a map function for describing the smooth prostate contour based on an improved machine learning model. Experimental results show that our proposed model achieved superior segmentation results compared with several other state-of-the-art models, achieving an average Dice Similarity Coefficient (DSC), Jaccard Similarity Coefficient (Ω), and Accuracy (ACC) of 96.5%, 95.2%, and 96.3%, respectively.

H-ProSeg: Hybrid ultrasound prostate segmentation based on explainability-guided mathematical model

BACKGROUND AND OBJECTIVE

Accurate and robust prostate segmentation in transrectal ultrasound (TRUS) images is of great interest for image-guided prostate interventions and prostate cancer diagnosis. However, it remains a challenging task for various reasons, including a missing or ambiguous boundary between the prostate and surrounding tissues, the presence of shadow artifacts, intra-prostate intensity heterogeneity, and anatomical variations.

METHODS

Here, we present a hybrid method for prostate segmentation (H-ProSeg) in TRUS images, using a small number of radiologist-defined seed points as the prior points. This method consists of three subnetworks. The first subnetwork uses an improved principal curve-based model to obtain data sequences consisting of seed points and their corresponding projection index. The second subnetwork uses an improved differential evolution-based artificial neural network for training to decrease the model error. The third subnetwork uses the parameters of the artificial neural network to explain the smooth mathematical description of the prostate contour. The performance of the H-ProSeg method was assessed in 55 brachytherapy patients using Dice similarity coefficient (DSC), Jaccard similarity coefficient (Ω), and accuracy (ACC) values.

RESULTS

The H-ProSeg method achieved excellent segmentation accuracy, with DSC, Ω, and ACC values of 95.8%, 94.3%, and 95.4%, respectively. Meanwhile, the DSC, Ω, and ACC values of the proposed method were as high as 93.3%, 91.9%, and 93%, respectively, due to the influence of Gaussian noise (standard deviation of Gaussian function, σ = 50). Although the σ increased from 10 to 50, the DSC, Ω, and ACC values fluctuated by a maximum of approximately 2.5%, demonstrating the excellent robustness of our method.

CONCLUSIONS

Here, we present a hybrid method for accurate and robust prostate ultrasound image segmentation. The H-ProSeg method achieved superior performance compared with current state-of-the-art techniques. The knowledge of precise boundaries of the prostate is crucial for the conservation of risk structures. The proposed models have the potential to improve prostate cancer diagnosis and therapeutic outcomes.

H-SegNet: hybrid segmentation network for lung segmentation in chest radiographs using mask region-based convolutional neural network and adaptive closed polyline searching method

Chest x-ray (CXR) is one of the most commonly used imaging techniques for the detection and diagnosis of pulmonary diseases. One critical component in many computer-aided systems, for either detection or diagnosis in digital CXR, is the accurate segmentation of the lung. Due to low-intensity contrast around lung boundary and large inter-subject variance, it has been challenging to segment lung from structural CXR images accurately. In this work, we propose an automatic Hybrid Segmentation Network (H-SegNet) for lung segmentation on CXR. The proposed H-SegNet consists of two key steps: (1) an image preprocessing step based on a deep learning model to automatically extract coarse lung contours; (2) a refinement step to fine-tune the coarse segmentation results based on an improved principal curve-based method coupled with an improved machine learning method. Experimental results on several public datasets show that the proposed method achieves superior segmentation results in lung CXRs, compared with several state-of-the-art methods.

Heart disease diagnosis using optimized features of hybridized ALCSOGA algorithm and LSTM classifier

Cardiac disease is the predominant cause of global death mainly due to its hidden symptoms and late diagnosis. Hence, early detection is important to improve quality of life. Though traditional researches attempted to predict heart disease, most of them lacked with respect to accuracy. To solve this, the present study proposes a hybridized Ant Lion Crow Search Optimization Genetic Algorithm (ALCSOGA) to perform effective feature selection. This hybrid optimization encompasses Ant Lion, Crow Search and Genetic Algorithm. Ant lion algorithm determines the elite position. While, the Crow Search Algorithm utilizes the phenomenon of position and memory of each crow for evaluating the objective function. Both these algorithms are fed into Genetic Algorithm to improve the performance of feature selection process. Then, Stochastic Learning rate optimized Long Short Term Memory (LSTM) is proposed to classify the extracted optimized features. Finally, comparative analysis is performed in terms of accuracy, recall, F1-score, and precision. Moreover, statistical analysis is performed with respect to Sum of Squares (SS), degree of freedom (df), F Critical (F crit), F Statistics (F), p, and Mean Square (MS) value. Analytical results revealed the efficiency of proposed system over conventional methods and thereby confirming its efficiency for predicting heart disease.

Estimation of the improved high-performance concrete’s mechanical characteristics using unique regression methods

A unique approach for assessing the compressive strength (CS) of high-performance concrete (HPC) incorporating blast furnace slag (BFS) and fly ash (FA) has been created using support vector regression (SVR) analytics. In order to identify crucial SVR methodology variables that could be adjusted for improved performance, the Henry gas solubility optimization (HGSO) and Cuckoo search optimization (CSO) algorithms were both employed in this study. The recommended methods were developed utilizing 1030 experiments and eight inputs, including the CS as the forecasting objective, admixtures, aggregates, and curing age as the main mix design component. The results were then contrasted with those from related literature. The estimate results suggest that combined HGSO-SVR and CSO-SVR analysis might perform extraordinarily well in estimating. The Root mean square error value for the HGSO - SVR decreased remarkably when compared to the CSO - SVR. As can be seen from the comparisons, the HGSO - SVR that was built beats anything previously published. In conclusion, the suggested HGSO - SVR analysis might be determined as the proposed system for forecasting the CS of HPC improved with FA and BFS.

Lung contour detection in Chest X-ray images using Mask Region-based Convolutional Neural Network and Adaptive Closed Polyline Searching Method

Detection of lung contour on chest X-ray images (CXRs) is a necessary step for computer-aid medical imaging analysis. Because of the low-intensity contrast around lung boundary and large inter-subject variance, it is challenging to detect lung from structural CXR images accurately. To tackle this problem, we design an automatic and hybrid detection network containing two stages for lung contour detection on CXRs. In the first stage, an image preprocessing stage based on a deep learning model is used to automatically extract coarse lung contours. In the second stage, a refinement step is used to fine-tune the coarse segmentation results based on an improved principal curve-based method coupled with an improved machine learning method. The model is evaluated on several public datasets, and experiments demonstrate that the performance of the proposed method outperforms state-of-the-art methods.Clinical Relevance- This can help radiologists for automatic separate lung, which can decrease the workloads of the radiologists' manually delineated lung contour in CXRs.

Feature Selection and Classification of Clinical Datasets Using Bioinspired Algorithms and Super Learner

A computer-aided diagnosis (CAD) system that employs a super learner to diagnose the presence or absence of a disease has been developed. Each clinical dataset is preprocessed and split into training set (60%) and testing set (40%). A wrapper approach that uses three bioinspired algorithms, namely, cat swarm optimization (CSO), krill herd (KH) ,and bacterial foraging optimization (BFO) with the classification accuracy of support vector machine (SVM) as the fitness function has been used for feature selection. The selected features of each bioinspired algorithm are stored in three separate databases. The features selected by each bioinspired algorithm are used to train three back propagation neural networks (BPNN) independently using the conjugate gradient algorithm (CGA). Classifier testing is performed by using the testing set on each trained classifier, and the diagnostic results obtained are used to evaluate the performance of each classifier. The classification results obtained for each instance of the testing set of the three classifiers and the class label associated with each instance of the testing set will be the candidate instances for training and testing the super learner. The training set comprises of 80% of the instances, and the testing set comprises of 20% of the instances. Experimentation has been carried out using seven clinical datasets from the University of California Irvine (UCI) machine learning repository. The super learner has achieved a classification accuracy of 96.83% for Wisconsin diagnostic breast cancer dataset (WDBC), 86.36% for Statlog heart disease dataset (SHD), 94.74% for hepatocellular carcinoma dataset (HCC), 90.48% for hepatitis dataset (HD), 81.82% for vertebral column dataset (VCD), 84% for Cleveland heart disease dataset (CHD), and 70% for Indian liver patient dataset (ILP).

A hybrid cost-sensitive ensemble for heart disease prediction

BACKGROUND

Heart disease is the primary cause of morbidity and mortality in the world. It includes numerous problems and symptoms. The diagnosis of heart disease is difficult because there are too many factors to analyze. What's more, the misclassification cost could be very high.

METHODS

A cost-sensitive ensemble method was proposed to improve the efficiency of diagnosis and reduce the misclassification cost. The proposed method contains five heterogeneous classifiers: random forest, logistic regression, support vector machine, extreme learning machine and k-nearest neighbor. T-test was used to investigate if the performance of the ensemble was better than individual classifiers and the contribution of Relief algorithm.

RESULTS

The best performance was achieved by the proposed method according to ten-fold cross validation. The statistical tests demonstrated that the performance of the proposed ensemble was significantly superior to individual classifiers, and the efficiency of classification was distinctively improved by Relief algorithm.

CONCLUSIONS

The proposed ensemble gained significantly better results compared with individual classifiers and previous studies, which implies that it can be used as a promising alternative tool in medical decision making for heart disease diagnosis.

Improved adaptive neuro-fuzzy inference system based on modified glowworm swarm and differential evolution optimization algorithm for medical diagnosis

Medical diagnosis has seen a tremendous advancement in the recent years due to the advent of modern and hybrid techniques that aid in screening and management of the disease. This paper figures a predictive model for detecting neurodegenerative diseases like glaucoma, Parkinson’s disease and carcinogenic diseases like breast cancer. The proposed approach focuses on enhancing the efficiency of adaptive neuro-fuzzy inference system (ANFIS) using a modified glowworm swarm optimization algorithm (M-GSO). This algorithm is a global optimization wrapper approach that simulates the collective behavior of glowworms in nature during food search. However, it still suffers from being trapped in local minima. Hence in order to improve glowworm swarm optimization algorithm, differential evolution (DE) algorithm is utilized to enhance the behavior of glowworms. The proposed (DE–GSO–ANFIS) approach estimates suitable prediction parameters of ANFIS by employing DE–GSO algorithm. The outcomes of the proposed model are compared with traditional ANFIS model, genetic algorithm-ANFIS (GA-ANFIS), particle swarm optimization-ANFIS (PSO-ANFIS), lion optimization algorithm-ANFIS (LOA-ANFIS), differential evolution-ANFIS (DE-ANFIS) and glowworm swarm optimization (GSO). Experimental results depict better performance and superiority of the DE–GSO–ANFIS over the similar methods in predicting medical disorders.

World competitive contest-based artificial neural network: A new class-specific method for classification of clinical and biological datasets

Many data mining methods have been proposed to generate computer-aided diagnostic systems, which may determine diseases in their early stages by categorizing the data into some proper classes. Considering the importance of the existence of a suitable classifier, the present study aims to introduce an efficient approach based on the World Competitive Contests (WCC) algorithm as well as a multi-layer perceptron artificial neural network (ANN). Unlike the previously introduced methods, which each has developed a universal model for all different kinds of data classes, our proposed approach generates a single specific model for each individual class of data. The experimental results show that the proposed method (ANNWCC), which can be applied to both the balanced and unbalanced datasets, yields more than 76% (without applying feature selection methods) and 90% (with applying feature selection methods) of the average five-fold cross-validation accuracy on the 13 clinical and biological datasets. The findings also indicate that under different conditions, our proposed method can produce better results in comparison to some state-of-art meta-heuristic algorithms and methods in terms of various statistical and classification measurements. To classify the clinical and biological data, a multi-layer ANN and the WCC algorithm were combined. It was shown that developing a specific model for each individual class of data may yield better results compared with creating a universal model for all of the existing data classes. Besides, some efficient algorithms proved to be essential to generate acceptable biological results, and the methods' performance was found to be enhanced by fuzzifying or normalizing the biological data.

•

We combined multi-layer artificial neural networks and world competitive contests algorithms to classify biological datasets

•

The proposed method has been investigated on 13 clinical datasets with different properties

•

Efficient models may yield better classification models and health diagnostic systems

•

Feature selection methods can improve the performance of a model in separating case and control samples

Artificial Intelligence-Based Model for the Prediction of Dynamic Modulus of Stone Mastic Asphalt

Stone Mastic Asphalt (SMA) is a tough, stable, rut-resistant mixture that takes advantage of the stone-to-stone contact to provide strength and durability for the material. Besides, the warm mix asphalt (WMA) technology allows reducing emissions and energy consumption by reducing the production temperature by 30–50 °C, compared to conventional hot mix asphalt technology (HMA). The dynamic modulus |E*| has been acknowledged as a vital material property in the mechanistic-empirical design and analysis and further reflects the strains and displacements of such layered pavement structures. The objective of this study is twofold, aiming at favoring the potential use of SMA with WMA technique. To this aim, first, laboratory tests were conducted to compare the performance of SMA and HMA through the dynamic modulus. Second, an advanced hybrid artificial intelligence technique to accurately predict the dynamic modulus of asphalt mixtures was developed. This hybrid model (ANN-TLBO) was based on an Artificial Neural Network (ANN) algorithm and Teaching Learning Based Optimization (TLBO) technique. A database containing the as-obtained experimental tests (96 data) was used for the development and assessment of the ANN-TLBO model. The experimental results showed that SMA mixtures exhibited higher values of the dynamic modulus |E*| than HMA, and the WMA technology increased the dynamic modulus values compared with the hot technology. Furthermore, the proposed hybrid algorithm could successfully predict the dynamic modulus with remarkable values of R2 of 0.989 and 0.985 for the training and testing datasets, respectively. Lastly, the effects of temperature and frequency on the dynamic modulus were evaluated and discussed.

A Sensitivity and Robustness Analysis of GPR and ANN for High-Performance Concrete Compressive Strength Prediction Using a Monte Carlo Simulation

This study aims to analyze the sensitivity and robustness of two Artificial Intelligence (AI) techniques, namely Gaussian Process Regression (GPR) with five different kernels (Matern32, Matern52, Exponential, Squared Exponential, and Rational Quadratic) and an Artificial Neural Network (ANN) using a Monte Carlo simulation for prediction of High-Performance Concrete (HPC) compressive strength. To this purpose, 1030 samples were collected, including eight input parameters (contents of cement, blast furnace slag, fly ash, water, superplasticizer, coarse aggregates, fine aggregates, and concrete age) and an output parameter (the compressive strength) to generate the training and testing datasets. The proposed AI models were validated using several standard criteria, namely coefficient of determination (R2), Root Mean Squared Error (RMSE), and Mean Absolute Error (MAE). To analyze the sensitivity and robustness of the models, Monte Carlo simulations were performed with 500 runs. The results showed that the GPR using the Matern32 kernel function outperforms others. In addition, the sensitivity analysis showed that the content of cement and the testing age of the HPC were the most sensitive and important factors for the prediction of HPC compressive strength. In short, this study might help in selecting suitable AI models and appropriate input parameters for accurate and quick estimation of the HPC compressive strength.

Differential Evolution for Neural Networks Optimization

In this paper, a Neural Networks optimizer based on Self-adaptive Differential Evolution is presented. This optimizer applies mutation and crossover operators in a new way, taking into account the structure of the network according to a per layer strategy. Moreover, a new crossover called interm is proposed, and a new self-adaptive version of DE called MAB-ShaDE is suggested to reduce the number of parameters. The framework has been tested on some well-known classification problems and a comparative study on the various combinations of self-adaptive methods, mutation, and crossover operators available in literature is performed. Experimental results show that DENN reaches good performances in terms of accuracy, better than or at least comparable with those obtained by backpropagation.

Imaging Examination and Quantitative Detection and Analysis of Gastrointestinal Diseases Based on Data Mining Technology

The medical image storage and transmission system completes the collection, storage, management, diagnosis and information processing of digital medical image information generated from digital medical devices, accumulates a large amount of data resources, and uses these valuable data resources to extract corresponding diseases. Diagnostic rules that help improve the accuracy of clinical disease diagnosis have always been the subject of medical research and management. Gastrointestinal diseases are common high-risk digestive diseases. This paper studies the imaging detection and quantitative detection and analysis of gastrointestinal diseases based on data mining, aiming to improve the accuracy of doctors' clinical diagnosis, reduce the misdiagnosis and misdiagnosis of patients' diseases, and reduce the burden on patients. With the high computing speed and computational accuracy of the computer, combined with the flexible analysis and judgment ability of the human body, the doctor can help the semi-structured and unstructured diagnosis problems. Experiments demonstrate the effectiveness and robustness of the proposed method.

Correlation-Based Ensemble Feature Selection Using Bioinspired Algorithms and Classification Using Backpropagation Neural Network

A framework for clinical diagnosis which uses bioinspired algorithms for feature selection and gradient descendant backpropagation neural network for classification has been designed and implemented. The clinical data are subjected to data preprocessing, feature selection, and classification. Hot deck imputation has been used for handling missing values and min-max normalization is used for data transformation. Wrapper approach that employs bioinspired algorithms, namely, Differential Evolution, Lion Optimization, and Glowworm Swarm Optimization with accuracy of AdaBoostSVM classifier as fitness function has been used for feature selection. Each bioinspired algorithm selects a subset of features yielding three feature subsets. Correlation-based ensemble feature selection is performed to select the optimal features from the three feature subsets. The optimal features selected through correlation-based ensemble feature selection are used to train a gradient descendant backpropagation neural network. Ten-fold cross-validation technique has been used to train and test the performance of the classifier. Hepatitis dataset and Wisconsin Diagnostic Breast Cancer (WDBC) dataset from University of California Irvine (UCI) Machine Learning repository have been used to evaluate the classification accuracy. An accuracy of 98.47% is obtained for Wisconsin Diagnostic Breast Cancer dataset, and 95.51% is obtained for Hepatitis dataset. The proposed framework can be tailored to develop clinical decision-making systems for any health disorders to assist physicians in clinical diagnosis.

Prediction and Sensitivity Analysis of Bubble Dissolution Time in 3D Selective Laser Sintering Using Ensemble Decision Trees

The presence of defects like gas bubble in fabricated parts is inherent in the selective laser sintering process and the prediction of bubble shrinkage dynamics is crucial. In this paper, two artificial intelligence (AI) models based on Decision Trees algorithm were constructed in order to predict bubble dissolution time, namely the Ensemble Bagged Trees (EDT Bagged) and Ensemble Boosted Trees (EDT Boosted). A metadata including 68644 data were generated with the help of our previously developed numerical tool. The AI models used the initial bubble size, external domain size, diffusion coefficient, surface tension, viscosity, initial concentration, and chamber pressure as input parameters, whereas bubble dissolution time was considered as output variable. Evaluation of the models’ performance was achieved by criteria such as Mean Absolute Error (MAE), Root Mean Squared Error (RMSE) and coefficient of determination (R²). The results showed that EDT Bagged outperformed EDT Boosted. Sensitivity analysis was then conducted thanks to the Monte Carlo approach and it was found that three most important inputs for the problem were the diffusion coefficient, initial concentration, and bubble initial size. This study might help in quick prediction of bubble dissolution time to improve the production quality from industry.