Risk-based estimate for operational safety in complex projects under uncertainty

Risk management in occupational safety: A systematic mapping

BACKGROUND

Occupational safety risk management is a systemic process capable of promoting technical engineering solutions, considering a wide range of predictable, unexpected and subjective factors related to accident occurrences. In Brazil, the behavior of managers in relation to risk management tends to be reactive, and facilitates access to information for crucial practical and academic purposes when it comes to changing the attitude of managers, so that their actions become increasingly more proactive.

OBJECTIVE

To identify, classify, analyze, and discuss the existing literature related to the topic, produced from 2008 to 2020, besides contributing to a broader understanding of risk management in occupational safety.

METHODS

We did a systematic literature mapping. The research process was documented starting by the planning stage. Afterwards, the focus was on research conduction and information synthesis.

RESULTS

Knowledge systematization and stratification about OHS risk management through various perspectives to identify, analyze and manage risks in the workplace. Were identified 37 tools for identifying and analyzing risks, management-related practices and future research trends.

CONCLUSIONS

The set of tools and management practices identified can be used as a support for decision making in the selection process of tools and practices to reduce risks and improve occupational safety. Also, the results can help target future research.

Study on the Preparation and Hydration Properties of a New Cementitious Material for Tailings Discharge

Blast furnace slag (BFS) is often used as a cement-based raw material for underground filling and surface cemented paste discharge of tailings during mining processes. This paper studied a new cement-based material (NCM) with BFS to replace ordinary Portland cement (OPC). A uniaxial compressive strength (UCS) experiment was used to test the mechanical strength of samples; X-ray diffraction and thermal gravity experiments were used to test the crystalline phases and amount of hydration products by samples; a scanning electron microscope experiment was used to observe the influence of the hydration products morphology by samples; mercury intrusion porosimetry experiment was used to analyze the pore size distribution of samples. The samples with NCM had an optimum UCS; the crystalline phases of the hydration products were similar in OPC and NCM. However, the amount of product formed in OPC was less than that in NCM at the same curing time; more ettringite and calcium silicate hydrate were produced in samples with NCM, which filled the pores and enhanced the UCS of the samples. The final mercury intrusion volume of the samples with NCM were lower than the samples with OPC at the same curing time, which showed that samples with NCM had lower porosities. For the samples with NCM and OPC cured from 7 days to 28 days, the mercury intrusion volume was reduced by 18% and 13%, and the most common pore size of the samples reduced by 53% and 29%, respectively. This showed after 21 days curing time, the pores of all the samples getting smaller; however, the samples with NCM were more compact. The main ingredients of the NCM were clinker, lime, gypsum and BFS, and its ratio was 14:6:10:70. The content of additives to NCM was 0.4%, and the ratio of sodium sulfate: alum: sodium fluorosilicate was 2:1:1.