A cell-based model for the photoacclimation and CO(2)-acclimation of the photosynthetic apparatus

Algae biofertilisers promote sustainable food production and a circular nutrient economy - An integrated empirical-modelling study

Agriculture has radically changed the global nitrogen (N) cycle and is heavily dependent on synthetic N-fertiliser. However, the N-use efficiency of synthetic fertilisers is often only 50% with N-losses from crop systems polluting the biosphere, hydrosphere and atmosphere. To address the large carbon and energy footprint of N-fertiliser synthesis and curb N-pollution, new technologies are required to deliver enhanced energy efficiency, decarbonisation and a circular nutrient economy. Algae fertilisers (AF) are an alternative to synthetic N-fertiliser (SF). Here microalgae were used as biofertiliser for spinach production. AF production was evaluated using life-cycle analyses. Over 4 weeks, AF released 63.5% of N as bioavailable ammonium and nitrate, and 25% of phosphorous (P) as phosphate to the growth substrate; SF released 100% N and 20% P. To maximise crop N-use and minimise N-leaching, we explored AF and SF dose-response-curves with spinach in glasshouse conditions. AF-grown spinach produced 36% less biomass than SF-grown plants due to AF's slower and linear N-release; SF exhibited 5-times higher N-leaching than AF. Optimised AF:SF blends yielded greater synchrony between N-release and crop-uptake, boosting crop yields and minimising N-loss. Additional benefits of AF included greener leaves, lower leaf nitrate concentration, and higher microbial diversity and water holding capacity of the growth substrate. An integrated techno-economic and life-cycle-analysis of scaled-up microalgae systems (+/- wastewater) normalised to the application dose showed that replacing the most effective SF-dose with AF lowered the annual carbon footprint of fertiliser production from 3.644 kg CO₂ m^-2 (C-producing) to -6.039 kg CO₂ m^-2 (C-assimilation). N-loss from growth substrate was lowered by 54%. Embodied energy for AF:SF blends could be reduced by 29% when cultivating microalgae on wastewater. Conclusions: (i) microalgae offer a sustainable alternative to synthetic N-fertiliser for spinach production and potentially other crop systems, (ii) microalgae biofertilisers support the circular-nutrient-economy and several UN-Sustainable-Development-Goals.

Techno-economic evaluation of microalgae high-density liquid fuel production at 12 international locations

BACKGROUND

Microalgae-based high-density fuels offer an efficient and environmental pathway towards decarbonization of the transport sector and could be produced as part of a globally distributed network without competing with food systems for arable land. Variations in climatic and economic conditions significantly impact the economic feasibility and productivity of such fuel systems, requiring harmonized technoeconomic assessments to identify important conditions required for commercial scale up.

METHODS

Here, our previously validated Techno-economic and Lifecycle Analysis (TELCA) platform was extended to provide a direct performance comparison of microalgae diesel production at 12 international locations with variable climatic and economic settings. For each location, historical weather data, and jurisdiction-specific policy and economic inputs were used to simulate algal productivity, evaporation rates, harvest regime, CapEx and OpEx, interest and tax under location-specific operational parameters optimized for Minimum Diesel Selling Price (MDSP, US$ L^-1). The economic feasibility, production capacity and CO_2-eq emissions of a defined 500 ha algae-based diesel production facility is reported for each.

RESULTS

Under a for-profit business model, 10 of the 12 locations achieved a minimum diesel selling price (MDSP) under US$ 1.85 L^-1 / US$ 6.99 gal^-1. At a fixed theoretical MDSP of US$ 2 L^-1 (US$ 7.57 gal^-1) these locations could achieve a profitable Internal Rate of Return (IRR) of 9.5-22.1%. Under a public utility model (0% profit, 0% tax) eight locations delivered cost-competitive renewable diesel at an MDSP of < US$ 1.24 L^-1 (US$ 4.69 gal^-1). The CO_2-eq emissions of microalgae diesel were about one-third of fossil-based diesel.

CONCLUSIONS

The public utility approach could reduce the fuel price toward cost-competitiveness, providing a key step on the path to a profitable fully commercial renewable fuel industry by attracting the investment needed to advance technology and commercial biorefinery co-production options. Governments' adoption of such an approach could accelerate decarbonization, improve fuel security, and help support a local COVID-19 economic recovery. This study highlights the benefits and limitations of different factors at each location (e.g., climate, labour costs, policy, C-credits) in terms of the development of the technology-providing insights on how governments, investors and industry can drive the technology forward.

Modeling of photosynthesis and respiration rate for Isochrysis galbana (T-Iso) and its influence on the production of this strain

Isochrysis galbana is a widely-used strain in aquaculture in spite of its low productivity. To maximize the productivity of processes based on this microalgae strain, we have developed a model considering the influence of irradiance, temperature, pH and dissolved oxygen concentration on the photosynthesis and respiration rate. Results demonstrate that this strain tolerates temperatures up to 35 °C but it is highly sensitive to irradiances higher than 500 μE m(-2)s(-1) and dissolved oxygen concentrations higher than 11 mgl(-1). We have validated the developed model using data from an industrial-scale outdoor tubular photobioreactor demonstrating that inadequate temperature and dissolved oxygen concentrations reduce productivity to half that which is maximal, according to light availability under real outdoor conditions. The developed model is a useful tool for managing working processes, but especially in the development of new processes based on this strain and to take decisions regarding optimal control strategies.

Comprehensive model of microalgae photosynthesis rate as a function of culture conditions in photobioreactors

In this paper, the influence of culture conditions (irradiance, temperature, pH, and dissolved oxygen) on the photosynthesis rate of Scenedesmus almeriensis cultures is analyzed. Short-run experiments were performed to study cell response to variations in culture conditions, which take place in changing environments such as outdoor photobioreactors. Experiments were performed by subjecting diluted samples of cells to different levels of irradiance, temperature, pH, and dissolved oxygen concentration. Results demonstrate the existence of photoinhibition phenomena at irradiances higher than 1,000 μE/m(2) s; in addition to reduced photosynthesis rates at inadequate temperatures or pH-the optimal values being 35 °C and 8, respectively. Moreover, photosynthesis rate reduction at dissolved oxygen concentrations above 20 mg/l is demonstrated. Data have been used to develop an integrated model based on considering the simultaneous influence of irradiance, temperature, pH, and dissolved oxygen. The model fits the experimental results in the range of culture conditions tested, and it was validated using data obtained by the simultaneous variation of two of the modified variables. Furthermore, the model fits experimental results obtained from an outdoor culture of S. almeriensis performed in an open raceway reactor. Results demonstrate that photosynthetic efficiency is modified as a function of culture conditions, and can be used to determine the proximity of culture conditions to optimal values. Optimal conditions found (T = 35 °C, pH = 8, dissolved oxygen concentration <20 mg/l) allows to maximize the use of light by the cells. The developed model is a powerful tool for the optimal design and management of microalgae-based processes, especially outdoors, where the cultures are subject to daily culture condition variations.

Modeling the dynamic modulation of light energy in photosynthetic algae

An integrated cell-based dynamic mathematical model that take into account the role of the photon absorbing process, the partition of excitation energy, and the photoinactivation and repair of photosynthetic units, under variable light and dissolved inorganic carbon (DIC) availability is proposed. The modeling of the photon energy absorption and the energy dissipation is based on the photoadaptive changes of the underlying mechanisms. The partition of the excitation energy is based on the relative availability of light and DIC to the cell. The modeling of the photoinactivation process is based on the common aspect that it occurs under any light intensity and the modeling of the repair process is based on the evidence that it is controlled by chloroplast and nuclear-encoded enzymes. The present model links the absorption of photons and the partitioning of excitation energy to the linear electron flow and other quenchers with chlorophyll fluorescence emission parameters, and the number of the functional photosynthetic units with the photosynthetic oxygen production rate. The energy allocation to the LEF increases as DIC availability increases and/or light intensity decreases. The rate of rejected energy increases with light intensity and with DIC availability. The resulting rate coefficient of photoinactivation increases as light intensity and/or as DIC concentration increases. We test the model against chlorophyll fluorescence induction and photosynthetic oxygen production rate measurements, obtained from cultures of the unicellular green alga Scenedesmus obliquus, and find a very close quantitative and qualitative correspondence between predictions and data.

Stylized facts in microalgal growth: interpretation in a dynamic energy budget context

A dynamic energy budget (DEB) model for microalgae is proposed. This model deviates from the standard DEB model as it needs more reserves to cope with the variation of assimilation pathways, requiring a different approach to growth based on the synthesizing unit (SU) theory for multiple substrates. It is shown that the model is able to accurately predict experimental data in constant and light-varying conditions with most of the parameter values taken directly from the literature. Also, model simulations are shown to be consistent with stylized facts (SFs) concerning NC ratio. These SFs are reinterpreted and the general conclusion is that all forcing variables (dilution rate, temperature and irradiance) impose changes in the nitrogen or carbon limitation status of the population, and consequently on reserve densities. Model predictions are also evaluated in comparison with SFs on chlorophyll concentration. It is proposed that an extra structure, more dependent on the nitrogen reserve, is required to accurately model chlorophyll dynamics. Finally, SFs concerning extracellular polymeric substances (EPSs) production by benthic diatoms are collected and interpreted and a formulation based on product synthesis and rejection flux is proposed for the EPSs production rate.

Bioenergetic changes in the microalgal photosynthetic apparatus by extremely high CO2 concentrations induce an intense biomass production

Unicellular green alga Chlorella minutissima, grown under extreme carbon dioxide concentrations (0.036-100%), natural temperature and light intensities (Mediterranean conditions), strongly increase the microalgal biomass through photochemical and non-photochemical changes in the photosynthetic apparatus. Especially, CO(2) concentrations up to 10% enhance the density of active reaction centers (RC/CS(o)), decrease the antenna size per active reaction center (ABS/RC), decrease the dissipation energy (DI(o)/RC) and enhance the quantum yield of primary photochemistry (F(v)/F(m)). Higher CO(2) concentrations (20-25%) combine the above-mentioned photochemical changes with enhanced non-photochemical quenching of surplus energy, which leads to an enhanced steady-state fraction of 'open' (oxidized) PSII reaction centers (q(p)), and minimize the excitation pressure of PSII (1 - q(p)) under very high light intensities (approximately 1700 micromol m(-2) s(-1) maximal value), avoiding the photoinhibition and leading to an enormous biomass production (approximately 2500%). In conclusion, these extreme CO(2) concentrations - about 1000 times higher than the ambient one - can be easily metabolized from the unicellular green alga to biomass and can be used, on a local scale at least, for the future development of microalgal photobioreactors for the mitigation of the factory-produced carbon dioxide.

A polyamine- and LHCII protease activity-based mechanism regulates the plasticity and adaptation status of the photosynthetic apparatus

In the present study we aim to dissect the basis of the polyamine mode of action in the structure and function of the photosynthetic apparatus. Although the modulating effects of polyamines in photosynthesis have been reported since long [K. Kotzabasis, A role for chloroplast-associated polyamines? Bot. Acta 109 (1996) 5-7], the underlying mechanisms remained until today largely unknown. The diamine putrescine was employed in this study, by being externally added to Scenedesmus obliquus cultures acclimated to either low or high light conditions. The results revealed the high efficiency by which putrescine can alter the levels of the major photosynthetic complexes in a concerted manner inducing an overall structure and function of the photosynthetic apparatus similar to that under higher light conditions. The revealed mechanism for this phenomenon involves alterations in the level of the polyamines putrescine and spermine which are bound to the photosynthetic complexes, mainly to the LHCII oligomeric and monomeric forms. In vitro studies point out to a direct impact of the polyamines on the autoproteolytic degradation of LHCII. Concomitantly to the reduction of the LHCII size, exogenously supplied putrescine, induces the reaction centers' density and thus the photosynthetic apparatus is adjusted as if it was adapted to higher light conditions. Thus polyamines, through LHCII, play a crucial role in the regulation of the photosynthetic apparatus' photoadaptation. The protective role of polyamines on the photosynthetic apparatus under various environmental stresses is also discussed in correlation to this phenomenon.